3 title: "SuperMicro Cascadelake"
6 # SuperMicro Cascadelake
12 CPU op-mode(s): 32-bit, 64-bit
13 Byte Order: Little Endian
15 On-line CPU(s) list: 0-111
17 Core(s) per socket: 28
20 Vendor ID: GenuineIntel
23 Model name: Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz
32 NUMA node0 CPU(s): 0-27,56-83
33 NUMA node1 CPU(s): 28-55,84-111
34 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
35 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
36 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
37 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
38 tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
39 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
40 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
41 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1
42 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx
43 smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
44 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
45 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
50 CPU op-mode(s): 32-bit, 64-bit
51 Byte Order: Little Endian
53 On-line CPU(s) list: 0-95
55 Core(s) per socket: 24
58 Vendor ID: GenuineIntel
61 Model name: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
70 NUMA node0 CPU(s): 0-23,48-71
71 NUMA node1 CPU(s): 24-47,72-95
72 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
73 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
74 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
75 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2
76 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
77 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
78 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
79 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle
80 avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap
81 clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
82 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
83 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
90 Getting SMBIOS data from sysfs.
94 Handle 0x0000, DMI type 0, 26 bytes
96 Vendor: American Megatrends Inc.
98 Release Date: 03/27/2019
105 BIOS shadowing is allowed
106 Boot from CD is supported
107 Selectable boot is supported
110 5.25"/1.2 MB floppy services are supported (int 13h)
111 3.5"/720 kB floppy services are supported (int 13h)
112 3.5"/2.88 MB floppy services are supported (int 13h)
113 Print screen service is supported (int 5h)
114 Serial services are supported (int 14h)
115 Printer services are supported (int 17h)
117 USB legacy is supported
118 BIOS boot specification is supported
119 Targeted content distribution is supported
123 Handle 0x0001, DMI type 1, 27 bytes
125 Manufacturer: Supermicro
126 Product Name: SYS-7049GP-TRT
128 Serial Number: S291427X9525476
129 UUID: 00000000-0000-0000-0000-AC1F6BACD7BA
130 Wake-up Type: Power Switch
131 SKU Number: To be filled by O.E.M.
132 Family: To be filled by O.E.M.
134 Handle 0x0002, DMI type 2, 15 bytes
135 Base Board Information
136 Manufacturer: Supermicro
137 Product Name: X11DPG-QT
139 Serial Number: VM189S007860
140 Asset Tag: To be filled by O.E.M.
142 Board is a hosting board
144 Location In Chassis: To be filled by O.E.M.
145 Chassis Handle: 0x0003
147 Contained Object Handles: 0
149 Handle 0x0003, DMI type 3, 22 bytes
151 Manufacturer: Supermicro
155 Serial Number: C7470KH37A30566
156 Asset Tag: To be filled by O.E.M.
158 Power Supply State: Safe
160 Security Status: None
161 OEM Information: 0x00000000
163 Number Of Power Cords: 1
164 Contained Elements: 0
165 SKU Number: To be filled by O.E.M.
167 Handle 0x0055, DMI type 4, 48 bytes
168 Processor Information
169 Socket Designation: CPU1
170 Type: Central Processor
172 Manufacturer: Intel(R) Corporation
173 ID: 57 06 05 00 FF FB EB BF
174 Signature: Type 0, Family 6, Model 85, Stepping 7
176 FPU (Floating-point unit on-chip)
177 VME (Virtual mode extension)
178 DE (Debugging extension)
179 PSE (Page size extension)
180 TSC (Time stamp counter)
181 MSR (Model specific registers)
182 PAE (Physical address extension)
183 MCE (Machine check exception)
184 CX8 (CMPXCHG8 instruction supported)
185 APIC (On-chip APIC hardware supported)
186 SEP (Fast system call)
187 MTRR (Memory type range registers)
188 PGE (Page global enable)
189 MCA (Machine check architecture)
190 CMOV (Conditional move instruction supported)
191 PAT (Page attribute table)
192 PSE-36 (36-bit page size extension)
193 CLFSH (CLFLUSH instruction supported)
195 ACPI (ACPI supported)
196 MMX (MMX technology supported)
197 FXSR (FXSAVE and FXSTOR instructions supported)
198 SSE (Streaming SIMD extensions)
199 SSE2 (Streaming SIMD extensions 2)
201 HTT (Multi-threading)
202 TM (Thermal monitor supported)
203 PBE (Pending break enabled)
204 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
206 External Clock: 100 MHz
208 Current Speed: 2300 MHz
209 Status: Populated, Enabled
210 Upgrade: Socket LGA3647-1
211 L1 Cache Handle: 0x0052
212 L2 Cache Handle: 0x0053
213 L3 Cache Handle: 0x0054
214 Serial Number: Not Specified
216 Part Number: Not Specified
225 Enhanced Virtualization
226 Power/Performance Control
228 Handle 0x0059, DMI type 4, 48 bytes
229 Processor Information
230 Socket Designation: CPU2
231 Type: Central Processor
233 Manufacturer: Intel(R) Corporation
234 ID: 57 06 05 00 FF FB EB BF
235 Signature: Type 0, Family 6, Model 85, Stepping 7
237 FPU (Floating-point unit on-chip)
238 VME (Virtual mode extension)
239 DE (Debugging extension)
240 PSE (Page size extension)
241 TSC (Time stamp counter)
242 MSR (Model specific registers)
243 PAE (Physical address extension)
244 MCE (Machine check exception)
245 CX8 (CMPXCHG8 instruction supported)
246 APIC (On-chip APIC hardware supported)
247 SEP (Fast system call)
248 MTRR (Memory type range registers)
249 PGE (Page global enable)
250 MCA (Machine check architecture)
251 CMOV (Conditional move instruction supported)
252 PAT (Page attribute table)
253 PSE-36 (36-bit page size extension)
254 CLFSH (CLFLUSH instruction supported)
256 ACPI (ACPI supported)
257 MMX (MMX technology supported)
258 FXSR (FXSAVE and FXSTOR instructions supported)
259 SSE (Streaming SIMD extensions)
260 SSE2 (Streaming SIMD extensions 2)
262 HTT (Multi-threading)
263 TM (Thermal monitor supported)
264 PBE (Pending break enabled)
265 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
267 External Clock: 100 MHz
269 Current Speed: 2300 MHz
270 Status: Populated, Enabled
271 Upgrade: Socket LGA3647-1
272 L1 Cache Handle: 0x0056
273 L2 Cache Handle: 0x0057
274 L3 Cache Handle: 0x0058
275 Serial Number: Not Specified
277 Part Number: Not Specified
286 Enhanced Virtualization
287 Power/Performance Control
290 ## Linux dmidecode pci
293 Handle 0x000B, DMI type 9, 17 bytes
294 System Slot Information
295 Designation: CPU1 SLOT2 PCI-E 3.0 X16
296 Type: x16 PCI Express 3 x16
297 Current Usage: In Use
303 PME signal is supported
304 Bus Address: 0000:18:00.0
306 Handle 0x000C, DMI type 9, 17 bytes
307 System Slot Information
308 Designation: CPU1 SLOT4 PCI-E 3.0 X16
309 Type: x16 PCI Express 3 x16
310 Current Usage: In Use
316 PME signal is supported
317 Bus Address: 0000:3b:00.0
319 Handle 0x000D, DMI type 9, 17 bytes
320 System Slot Information
321 Designation: CPU2 SLOT6 PCI-E 3.0 X16
322 Type: x16 PCI Express 3 x16
323 Current Usage: Available
329 PME signal is supported
330 Bus Address: 0000:ff:00.0
332 Handle 0x000E, DMI type 9, 17 bytes
333 System Slot Information
334 Designation: CPU2 SLOT8 PCI-E 3.0 X16
335 Type: x16 PCI Express 3 x16
336 Current Usage: Available
342 PME signal is supported
343 Bus Address: 0000:ff:00.0
345 Handle 0x000F, DMI type 9, 17 bytes
346 System Slot Information
347 Designation: CPU1 SLOT9 PCI-E 3.0 X16
348 Type: x16 PCI Express 3 x16
349 Current Usage: Available
355 PME signal is supported
356 Bus Address: 0000:ff:00.0
358 Handle 0x0010, DMI type 9, 17 bytes
359 System Slot Information
360 Designation: CPU2 SLOT10 PCI-E 3.0 X16
361 Type: x16 PCI Express 3 x16
362 Current Usage: Available
368 PME signal is supported
369 Bus Address: 0000:ff:00.0
371 Handle 0x0011, DMI type 9, 17 bytes
372 System Slot Information
373 Designation: CPU2 SLOT11 PCI-E 3.0 X4(IN X8)
374 Type: x4 PCI Express 3 x8
375 Current Usage: Available
381 PME signal is supported
382 Bus Address: 0000:ff:00.0
384 Handle 0x0012, DMI type 9, 17 bytes
385 System Slot Information
386 Designation: M.2 CONNECTOR
387 Type: x4 M.2 Socket 2
388 Current Usage: Available
393 PME signal is supported
394 Bus Address: 0000:ff:00.0
397 ## Linux dmidecode memory
400 Handle 0x0023, DMI type 17, 84 bytes
403 Error Information Handle: Not Provided
410 Bank Locator: P0_Node0_Channel0_Dimm0
412 Type Detail: Synchronous
414 Manufacturer: SK Hynix
415 Serial Number: 93275F0E
416 Asset Tag: P1-DIMMA1_AssetTag (date:19/22)
417 Part Number: HMA82GR7CJR8N-WM
419 Configured Clock Speed: 2934 MT/s
420 Minimum Voltage: 1.2 V
421 Maximum Voltage: 1.2 V
422 Configured Voltage: 1.2 V
424 Handle 0x0024, DMI type 17, 84 bytes
427 Error Information Handle: Not Provided
430 Size: No Module Installed
434 Bank Locator: P0_Node0_Channel0_Dimm1
438 Manufacturer: NO DIMM
439 Serial Number: NO DIMM
443 Configured Clock Speed: Unknown
444 Minimum Voltage: 1.2 V
445 Maximum Voltage: 1.2 V
446 Configured Voltage: 1.2 V
448 Handle 0x0025, DMI type 17, 84 bytes
451 Error Information Handle: Not Provided
458 Bank Locator: P0_Node0_Channel1_Dimm0
460 Type Detail: Synchronous
462 Manufacturer: SK Hynix
463 Serial Number: 93275F1F
464 Asset Tag: P1-DIMMB1_AssetTag (date:19/22)
465 Part Number: HMA82GR7CJR8N-WM
467 Configured Clock Speed: 2934 MT/s
468 Minimum Voltage: 1.2 V
469 Maximum Voltage: 1.2 V
470 Configured Voltage: 1.2 V
472 Handle 0x0027, DMI type 17, 84 bytes
475 Error Information Handle: Not Provided
482 Bank Locator: P0_Node0_Channel2_Dimm0
484 Type Detail: Synchronous
486 Manufacturer: SK Hynix
487 Serial Number: 93275F07
488 Asset Tag: P1-DIMMC1_AssetTag (date:19/22)
489 Part Number: HMA82GR7CJR8N-WM
491 Configured Clock Speed: 2934 MT/s
492 Minimum Voltage: 1.2 V
493 Maximum Voltage: 1.2 V
494 Configured Voltage: 1.2 V
496 Handle 0x002B, DMI type 17, 84 bytes
499 Error Information Handle: Not Provided
506 Bank Locator: P0_Node1_Channel0_Dimm0
508 Type Detail: Synchronous
510 Manufacturer: SK Hynix
511 Serial Number: 93275F02
512 Asset Tag: P1-DIMMD1_AssetTag (date:19/22)
513 Part Number: HMA82GR7CJR8N-WM
515 Configured Clock Speed: 2934 MT/s
516 Minimum Voltage: 1.2 V
517 Maximum Voltage: 1.2 V
518 Configured Voltage: 1.2 V
520 Handle 0x002C, DMI type 17, 84 bytes
523 Error Information Handle: Not Provided
526 Size: No Module Installed
530 Bank Locator: P0_Node1_Channel0_Dimm1
534 Manufacturer: NO DIMM
535 Serial Number: NO DIMM
539 Configured Clock Speed: Unknown
540 Minimum Voltage: 1.2 V
541 Maximum Voltage: 1.2 V
542 Configured Voltage: 1.2 V
544 Handle 0x002D, DMI type 17, 84 bytes
547 Error Information Handle: Not Provided
554 Bank Locator: P0_Node1_Channel1_Dimm0
556 Type Detail: Synchronous
558 Manufacturer: SK Hynix
559 Serial Number: 93275F19
560 Asset Tag: P1-DIMME1_AssetTag (date:19/22)
561 Part Number: HMA82GR7CJR8N-WM
563 Configured Clock Speed: 2934 MT/s
564 Minimum Voltage: 1.2 V
565 Maximum Voltage: 1.2 V
566 Configured Voltage: 1.2 V
568 Handle 0x002F, DMI type 17, 84 bytes
571 Error Information Handle: Not Provided
578 Bank Locator: P0_Node1_Channel2_Dimm0
580 Type Detail: Synchronous
582 Manufacturer: SK Hynix
583 Serial Number: 93275FD3
584 Asset Tag: P1-DIMMF1_AssetTag (date:19/22)
585 Part Number: HMA82GR7CJR8N-WM
587 Configured Clock Speed: 2934 MT/s
588 Minimum Voltage: 1.2 V
589 Maximum Voltage: 1.2 V
590 Configured Voltage: 1.2 V
592 Handle 0x0031, DMI type 16, 23 bytes
593 Physical Memory Array
594 Location: System Board Or Motherboard
596 Error Correction Type: Single-bit ECC
597 Maximum Capacity: 2304 GB
598 Error Information Handle: Not Provided
601 Handle 0x0033, DMI type 17, 84 bytes
604 Error Information Handle: Not Provided
611 Bank Locator: P1_Node0_Channel0_Dimm0
613 Type Detail: Synchronous
615 Manufacturer: SK Hynix
616 Serial Number: 93275FE2
617 Asset Tag: P2-DIMMA1_AssetTag (date:19/22)
618 Part Number: HMA82GR7CJR8N-WM
620 Configured Clock Speed: 2934 MT/s
621 Minimum Voltage: 1.2 V
622 Maximum Voltage: 1.2 V
623 Configured Voltage: 1.2 V
625 Handle 0x0034, DMI type 17, 84 bytes
628 Error Information Handle: Not Provided
631 Size: No Module Installed
635 Bank Locator: P1_Node0_Channel0_Dimm1
639 Manufacturer: NO DIMM
640 Serial Number: NO DIMM
644 Configured Clock Speed: Unknown
645 Minimum Voltage: 1.2 V
646 Maximum Voltage: 1.2 V
647 Configured Voltage: 1.2 V
649 Handle 0x0035, DMI type 17, 84 bytes
652 Error Information Handle: Not Provided
659 Bank Locator: P1_Node0_Channel1_Dimm0
661 Type Detail: Synchronous
663 Manufacturer: SK Hynix
664 Serial Number: 93276001
665 Asset Tag: P2-DIMMB1_AssetTag (date:19/22)
666 Part Number: HMA82GR7CJR8N-WM
668 Configured Clock Speed: 2934 MT/s
669 Minimum Voltage: 1.2 V
670 Maximum Voltage: 1.2 V
671 Configured Voltage: 1.2 V
673 Handle 0x0037, DMI type 17, 84 bytes
676 Error Information Handle: Not Provided
683 Bank Locator: P1_Node0_Channel2_Dimm0
685 Type Detail: Synchronous
687 Manufacturer: SK Hynix
688 Serial Number: 93276005
689 Asset Tag: P2-DIMMC1_AssetTag (date:19/22)
690 Part Number: HMA82GR7CJR8N-WM
692 Configured Clock Speed: 2934 MT/s
693 Minimum Voltage: 1.2 V
694 Maximum Voltage: 1.2 V
695 Configured Voltage: 1.2 V
697 Handle 0x0039, DMI type 16, 23 bytes
698 Physical Memory Array
699 Location: System Board Or Motherboard
701 Error Correction Type: Single-bit ECC
702 Maximum Capacity: 2304 GB
703 Error Information Handle: Not Provided
706 Handle 0x003B, DMI type 17, 84 bytes
709 Error Information Handle: Not Provided
716 Bank Locator: P1_Node1_Channel0_Dimm0
718 Type Detail: Synchronous
720 Manufacturer: SK Hynix
721 Serial Number: 93275F44
722 Asset Tag: P2-DIMMD1_AssetTag (date:19/22)
723 Part Number: HMA82GR7CJR8N-WM
725 Configured Clock Speed: 2934 MT/s
726 Minimum Voltage: 1.2 V
727 Maximum Voltage: 1.2 V
728 Configured Voltage: 1.2 V
730 Handle 0x003C, DMI type 17, 84 bytes
733 Error Information Handle: Not Provided
736 Size: No Module Installed
740 Bank Locator: P1_Node1_Channel0_Dimm1
744 Manufacturer: NO DIMM
745 Serial Number: NO DIMM
749 Configured Clock Speed: Unknown
750 Minimum Voltage: 1.2 V
751 Maximum Voltage: 1.2 V
752 Configured Voltage: 1.2 V
754 Handle 0x003D, DMI type 17, 84 bytes
757 Error Information Handle: Not Provided
764 Bank Locator: P1_Node1_Channel1_Dimm0
766 Type Detail: Synchronous
768 Manufacturer: SK Hynix
769 Serial Number: 93275FDF
770 Asset Tag: P2-DIMME1_AssetTag (date:19/22)
771 Part Number: HMA82GR7CJR8N-WM
773 Configured Clock Speed: 2934 MT/s
774 Minimum Voltage: 1.2 V
775 Maximum Voltage: 1.2 V
776 Configured Voltage: 1.2 V
778 Handle 0x003F, DMI type 17, 84 bytes
781 Error Information Handle: Not Provided
788 Bank Locator: P1_Node1_Channel2_Dimm0
790 Type Detail: Synchronous
792 Manufacturer: SK Hynix
793 Serial Number: 93275FDD
794 Asset Tag: P2-DIMMF1_AssetTag (date:19/22)
795 Part Number: HMA82GR7CJR8N-WM
797 Configured Clock Speed: 2934 MT/s
798 Minimum Voltage: 1.2 V
799 Maximum Voltage: 1.2 V
800 Configured Voltage: 1.2 V
803 ## Xeon CLX Server BIOS Configuration - TG
808 | Quiet Boot [Enabled] |Boot option |
810 | Option ROM Messages [Force BIOS] | |
811 | Bootup NumLock State [On] | |
812 | Wait For "F1" If Error [Enabled] | |
813 | INT19 Trap Response [Immediate] | |
814 | Re-try Boot [Disabled] | |
815 | Install Windows 7 USB support [Disabled] | |
816 | Port 61h Bit-4 Emulation [Disabled] | |
818 | Power Configuration | |
819 | Watch Dog Function [Disabled] | |
820 | Restore on AC Power Loss [Last State] | |
821 | Power Button Function [Instant Off] | |
824 ### CPU Configuration
827 | Processor Configuration ^|Enables Hyper Threading |
828 | -------------------------------------------------- *|(Software Method to |
829 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
830 | Processor Socket CPU1 | CPU2 *|Processor threads. |
831 | Processor ID 00050657* | 00050657 *| |
832 | Processor Frequency 2.700GHz | 2.700GHz *| |
833 | Processor Max Ratio 1BH | 1BH *| |
834 | Processor Min Ratio 0AH | 0AH *| |
835 | Microcode Revision 0500002C | 0500002C *| |
836 | L1 Cache RAM 64KB | 64KB *| |
837 | L2 Cache RAM 1024KB | 1024KB *| |
838 | L3 Cache RAM 39424KB | 39424KB *| |
839 | Processor 0 Version *| |
840 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
841 | Processor 1 Version *| |
842 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
843 | *|-----------------------------|
844 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
845 | Cores Enabled 0 *|^v: Select Item |
846 | Monitor/Mwait [Auto] *|Enter: Select |
847 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
848 | Intel Virtualization Technology [Enable] +|F1: General Help |
849 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
850 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
851 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
852 | DCU Streamer Prefetcher [Enable] | |
853 | DCU IP Prefetcher [Enable] | |
854 | LLC Prefetch [Disable] | |
855 | Extended APIC [Disable] | |
856 | AES-NI [Enable] | |
857 |> Advanced Power Management Configuration | |
860 #### Advanced Power Management Configuration
863 | Advanced Power Management Configuration |Switch CPU Power Management |
864 | -------------------------------------------------- |profile |
865 | Power Technology [Custom] | |
866 | Power Performance Tuning [BIOS Controls EPB] | |
867 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
868 |> CPU P State Control | |
869 |> Hardware PM State Control | |
870 |> CPU C State Control | |
871 |> Package C State Control | |
872 |> CPU T State Control | |
875 ##### CPU P State Control
878 | CPU P State Control |EIST allows the processor |
879 | |to dynamically adjust |
880 | SpeedStep (P-States) [Disable] |frequency and voltage based |
881 | EIST PSD Function [HW_ALL] |on power versus performance |
886 ##### Hardware PM State Control
889 | Hardware PM State Control |If set to Disable, hardware ^|
890 | |will choose a P-state *|
891 | Hardware P-States [Disable] |setting for the system *|
892 | |based on an OS request. *|
893 | |If set to Native Mode, *|
894 | |hardware will choose a *|
895 | |P-state setting based on OS *|
897 | |If set to Native Mode with *|
898 | |No Legacy Support, hardware *|
899 | |will choose a P-state *|
900 | |setting independently *|
901 | |without OS guidance. +|
902 | |If set to Out of Band Mode, +|
903 | |hardware autonomously v|
906 ##### CPU C State Control
909 | CPU C State Control |Select Enable to support |
910 | |Autonomous Core C-State |
911 | Autonomous Core C-State [Disable] |control which will allow |
912 | CPU C6 report [Disable] |the processor core to |
913 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
914 | |automatically and |
918 ##### Package C State Control
921 | Package C State Control |Limit the lowest package |
922 | |level C-State to |
923 | Package C State [C0/C1 state] |processors. Lower package |
924 | |C-State lower processor |
925 | |power consumption upon idle. |
928 ##### CPU T State Control
931 | CPU T State Control |Enable/Disable CPU |
932 | |throttling by OS. |
933 | Software Controlled T-States [Disable] |Throttling reduces power |
937 #### Chipset Configuration
940 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
941 | system to malfunction. | |
949 |> UPI Configuration |Displays and provides |
950 |> Memory Configuration |option to change the UPI |
951 |> IIO Configuration |Settings |
954 ##### UPI Configuration
957 | UPI Configuration |Use this feature to select |
958 | -------------------------------------------------- |the degrading precedence |
959 | Number of CPU 2 |option for Ultra Path |
960 | Number of Active UPI Link 3 |Interconnect connections. |
961 | Current UPI Link Speed Fast |Select Topology Precedent |
962 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
963 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
964 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
965 | 00000000FFFFFFFF |Precedent to degrade UPI |
966 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
967 | Degrade Precedence [Topology Precedence] |are in conflict. |
968 | Link L0p Enable [Disable] | |
969 | Link L1 Enable [Disable] | |
970 | IO Directory Cache (IODC) [Auto] | |
972 | XPT Prefetch [Disable] | |
973 | KTI Prefetch [Enable] |-----------------------------|
974 | Local/Remote Threshold [Auto] |><: Select Screen |
975 | Stale AtoS [Auto] |^v: Select Item |
976 | LLC Dead Line Alloc [Enable] |Enter: Select |
977 | Isoc Mode [Auto] |+/-: Change Opt. |
980 ##### Memory Configuration
983 | |Select POR to enforce POR |
984 | -------------------------------------------------- |restrictions for DDR4 |
985 | Integrated Memory Controller (iMC) |frequency and voltage |
986 | -------------------------------------------------- |programming |
988 | Enforce POR [POR] | |
989 | PPR Type [Hard PPR] | |
990 | Enhanced PPR [Disable] | |
991 | Operation Mode [Test and Repair] | |
992 | Memory Frequency [2933] | |
993 | Data Scrambling for DDR4 [Auto] | |
994 | tCCD_L Relaxation [Auto] | |
995 | tRWSR Relaxation [Disable] | |
996 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
997 | 2x Refresh [Auto] | |
998 | Page Policy [Auto] | |
999 | IMC Interleaving [2-way Interleave] |-----------------------------|
1000 |> Memory Topology |><: Select Screen |
1001 |> Memory RAS Configuration |^v: Select Item |
1004 ##### IIO Configuration
1007 | IIO Configuration |Expose IIO DFX devices and |
1008 | -------------------------------------------------- |other CPU devices like PMON |
1010 | EV DFX Features [Disable] | |
1011 |> CPU1 Configuration | |
1012 |> CPU2 Configuration | |
1013 |> IOAT Configuration | |
1014 |> Intel. VT for Directed I/O (VT-d) | |
1015 |> Intel. VMD technology | |
1017 | IIO-PCIE Express Global Options | |
1018 | ======================================== | |
1019 | PCI-E Completion Timeout Disable [No] | |
1022 ##### CPU1 Configuration
1025 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1026 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1027 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1028 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1029 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1030 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1033 ##### CPU2 Configuration
1036 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1037 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1038 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1039 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1040 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1041 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1047 | |Enables Legacy USB support. |
1048 | USB Module Version 21 |AUTO option disables legacy |
1049 | |support if no USB devices |
1050 | USB Devices: |are connected. DISABLE |
1051 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1052 | |devices available only for |
1053 | Legacy USB Support [Enabled] |EFI applications. |
1054 | XHCI Hand-off [Enabled] | |
1055 | Port 60/64 Emulation [Enabled] | |
1056 | PCIe PLL SSC [Disable] | |
1057 | Real USB Wake Up [Enabled] | |
1058 | Front USB Wake Up [Enabled] | |
1061 | Azalia PME Enable [Disabled] | |
1064 ### PCIe/PCI/PnP Configuration
1067 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1068 | *|capable Devices to be |
1069 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1070 | Above 4G Decoding [Enabled] *|Space (Only if System |
1071 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1072 | ARI Support [Enabled] *|Decoding). |
1073 | MMIO High Base [56T] *| |
1074 | MMIO High Granularity Size [256G] *| |
1075 | Maximum Read Request [Auto] *| |
1076 | MMCFG Base [2G] *| |
1077 | NVMe Firmware Source [Vendor Defined *| |
1079 | VGA Priority [Onboard] *| |
1080 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1081 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1082 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1083 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1084 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1085 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1086 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1087 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1088 | Bus Master Enable [Enabled] +|F1: General Help |
1089 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1090 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1091 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1092 |> Network Stack Configuration | |
1098 | ACPI Settings |Enable or Disable Non |
1099 | |uniform Memory Access |
1100 | NUMA [Enabled] |(NUMA). |
1101 | WHEA Support [Enabled] | |
1102 | High Precision Event Timer [Enabled] | |
1105 ## Xeon CLX Server BIOS Configuration - DUT
1110 | Quiet Boot [Enabled] |Boot option |
1112 | Option ROM Messages [Force BIOS] | |
1113 | Bootup NumLock State [On] | |
1114 | Wait For "F1" If Error [Enabled] | |
1115 | INT19 Trap Response [Immediate] | |
1116 | Re-try Boot [Disabled] | |
1117 | Install Windows 7 USB support [Disabled] | |
1118 | Port 61h Bit-4 Emulation [Disabled] | |
1120 | Power Configuration | |
1121 | Watch Dog Function [Disabled] | |
1122 | Restore on AC Power Loss [Last State] | |
1123 | Power Button Function [Instant Off] | |
1126 ### CPU Configuration
1129 |--------------------------------------------------------------------+-----------------------------\
1130 | Processor Configuration ^|Enables Hyper Threading |
1131 | -------------------------------------------------- *|(Software Method to |
1132 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
1133 | Processor Socket CPU1 | CPU2 *|Processor threads. |
1134 | Processor ID 00050657* | 00050657 *| |
1135 | Processor Frequency 2.300GHz | 2.300GHz *| |
1136 | Processor Max Ratio 17H | 17H *| |
1137 | Processor Min Ratio 0AH | 0AH *| |
1138 | Microcode Revision 0500002C | 0500002C *| |
1139 | L1 Cache RAM 64KB | 64KB *| |
1140 | L2 Cache RAM 1024KB | 1024KB *| |
1141 | L3 Cache RAM 36608KB | 36608KB *| |
1142 | Processor 0 Version *| |
1143 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1144 | Processor 1 Version *| |
1145 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1146 | *|-----------------------------|
1147 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
1148 | Cores Enabled 0 *|^v: Select Item |
1149 | Monitor/Mwait [Auto] *|Enter: Select |
1150 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
1151 | Intel Virtualization Technology [Enable] +|F1: General Help |
1152 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
1153 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
1154 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
1155 | DCU Streamer Prefetcher [Enable] | |
1156 | DCU IP Prefetcher [Enable] | |
1157 | LLC Prefetch [Disable] | |
1158 | Extended APIC [Disable] | |
1159 | AES-NI [Enable] | |
1160 |> Advanced Power Management Configuration | |
1163 #### Advanced Power Management Configuration
1166 | Advanced Power Management Configuration |Switch CPU Power Management |
1167 | -------------------------------------------------- |profile |
1168 | Power Technology [Custom] | |
1169 | Power Performance Tuning [BIOS Controls EPB] | |
1170 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
1171 |> CPU P State Control | |
1172 |> Hardware PM State Control | |
1173 |> CPU C State Control | |
1174 |> Package C State Control | |
1175 |> CPU T State Control | |
1178 ##### CPU P State Control
1181 | CPU P State Control |EIST allows the processor |
1182 | |to dynamically adjust |
1183 | SpeedStep (P-States) [Disable] |frequency and voltage based |
1184 | Activate PBF [Disable] |on power versus performance |
1185 | Configure PBF [Enable] |needs. |
1186 | EIST PSD Function [HW_ALL] | |
1189 ##### Hardware PM State Control
1192 | Hardware PM State Control |If set to Disable, hardware ^|
1193 | |will choose a P-state *|
1194 | Hardware P-States [Disable] |setting for the system *|
1195 | |based on an OS request. *|
1196 | |If set to Native Mode, *|
1197 | |hardware will choose a *|
1198 | |P-state setting based on OS *|
1200 | |If set to Native Mode with *|
1201 | |No Legacy Support, hardware *|
1202 | |will choose a P-state *|
1203 | |setting independently *|
1204 | |without OS guidance. +|
1205 | |If set to Out of Band Mode, +|
1206 | |hardware autonomously v|
1209 ##### CPU C State Control
1212 | CPU C State Control |Select Enable to support |
1213 | |Autonomous Core C-State |
1214 | Autonomous Core C-State [Disable] |control which will allow |
1215 | CPU C6 report [Disable] |the processor core to |
1216 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
1217 | |automatically and |
1221 ##### Package C State Control
1224 | Package C State Control |Limit the lowest package |
1225 | |level C-State to |
1226 | Package C State [C0/C1 state] |processors. Lower package |
1227 | |C-State lower processor |
1228 | |power consumption upon idle. |
1231 ##### CPU T State Control
1234 | CPU T State Control |Enable/Disable CPU |
1235 | |throttling by OS. |
1236 | Software Controlled T-States [Disable] |Throttling reduces power |
1240 #### Chipset Configuration
1243 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
1244 | system to malfunction. | |
1252 |> UPI Configuration |Displays and provides |
1253 |> Memory Configuration |option to change the UPI |
1254 |> IIO Configuration |Settings |
1257 ##### UPI Configuration
1260 | UPI Configuration |Use this feature to select |
1261 | -------------------------------------------------- |the degrading precedence |
1262 | Number of CPU 2 |option for Ultra Path |
1263 | Number of Active UPI Link 3 |Interconnect connections. |
1264 | Current UPI Link Speed Fast |Select Topology Precedent |
1265 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
1266 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
1267 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
1268 | 00000000FFFFFFFF |Precedent to degrade UPI |
1269 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
1270 | Degrade Precedence [Topology Precedence] |are in conflict. |
1271 | Link L0p Enable [Disable] | |
1272 | Link L1 Enable [Disable] | |
1273 | IO Directory Cache (IODC) [Auto] | |
1275 | XPT Prefetch [Disable] | |
1276 | KTI Prefetch [Enable] |-----------------------------|
1277 | Local/Remote Threshold [Auto] |><: Select Screen |
1278 | Stale AtoS [Auto] |^v: Select Item |
1279 | LLC Dead Line Alloc [Enable] |Enter: Select |
1280 | Isoc Mode [Auto] |+/-: Change Opt. |
1283 ##### Memory Configuration
1286 | |Select POR to enforce POR |
1287 | -------------------------------------------------- |restrictions for DDR4 |
1288 | Integrated Memory Controller (iMC) |frequency and voltage |
1289 | -------------------------------------------------- |programming |
1291 | Enforce POR [POR] | |
1292 | PPR Type [Hard PPR] | |
1293 | Enhanced PPR [Disable] | |
1294 | Operation Mode [Test and Repair] | |
1295 | Memory Frequency [2933] | |
1296 | Data Scrambling for DDR4 [Auto] | |
1297 | tCCD_L Relaxation [Auto] | |
1298 | tRWSR Relaxation [Disable] | |
1299 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
1300 | 2x Refresh [Auto] | |
1301 | Page Policy [Auto] | |
1302 | IMC Interleaving [2-way Interleave] |-----------------------------|
1303 |> Memory Topology |><: Select Screen |
1304 |> Memory RAS Configuration |^v: Select Item |
1307 ##### IIO Configuration
1310 | IIO Configuration |Expose IIO DFX devices and |
1311 | -------------------------------------------------- |other CPU devices like PMON |
1313 | EV DFX Features [Disable] | |
1314 |> CPU1 Configuration | |
1315 |> CPU2 Configuration | |
1316 |> IOAT Configuration | |
1317 |> Intel. VT for Directed I/O (VT-d) | |
1318 |> Intel. VMD technology | |
1320 | IIO-PCIE Express Global Options | |
1321 | ======================================== | |
1322 | PCI-E Completion Timeout Disable [No] | |
1325 ##### CPU1 Configuration
1328 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1329 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1330 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1331 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1332 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1333 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1336 ##### CPU2 Configuration
1339 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1340 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1341 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1342 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1343 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1344 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1350 | |Enables Legacy USB support. |
1351 | USB Module Version 21 |AUTO option disables legacy |
1352 | |support if no USB devices |
1353 | USB Devices: |are connected. DISABLE |
1354 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1355 | |devices available only for |
1356 | Legacy USB Support [Enabled] |EFI applications. |
1357 | XHCI Hand-off [Enabled] | |
1358 | Port 60/64 Emulation [Enabled] | |
1359 | PCIe PLL SSC [Disable] | |
1360 | Real USB Wake Up [Enabled] | |
1361 | Front USB Wake Up [Enabled] | |
1364 | Azalia PME Enable [Disabled] | |
1367 ### PCIe/PCI/PnP Configuration
1370 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1371 | *|capable Devices to be |
1372 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1373 | Above 4G Decoding [Enabled] *|Space (Only if System |
1374 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1375 | ARI Support [Enabled] *|Decoding). |
1376 | MMIO High Base [56T] *| |
1377 | MMIO High Granularity Size [256G] *| |
1378 | Maximum Read Request [Auto] *| |
1379 | MMCFG Base [2G] *| |
1380 | NVMe Firmware Source [Vendor Defined *| |
1382 | VGA Priority [Onboard] *| |
1383 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1384 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1385 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1386 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1387 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1388 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1389 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1390 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1391 | Bus Master Enable [Enabled] +|F1: General Help |
1392 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1393 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1394 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1395 |> Network Stack Configuration | |
1401 | ACPI Settings |Enable or Disable Non |
1402 | |uniform Memory Access |
1403 | NUMA [Enabled] |(NUMA). |
1404 | WHEA Support [Enabled] | |
1405 | High Precision Event Timer [Enabled] | |
1412 BOOT_IMAGE=/boot/vmlinuz-5.15.0-46-generic root=UUID=2d6f4d44-76b1-4343-bc73-c066a3e95b32 ro audit=0 default_hugepagesz=2M hugepagesz=1G hugepages=32 hugepagesz=2M hugepages=32768 hpet=disable intel_idle.max_cstate=1 intel_iommu=on intel_pstate=disable iommu=pt isolcpus=1-23,25-47,49-71,73-95 mce=off nmi_watchdog=0 nohz_full=1-23,25-47,49-71,73-95 nosoftlockup numa_balancing=disable processor.max_cstate=1 rcu_nocbs=1-23,25-47,49-71,73-95 tsc=reliable console=ttyS0,115200n8 quiet
1415 ## Xeon Clx Server Firmware Inventory
1418 Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core E810 Firmware. ice.
1419 s33-t27-sut1. 10.30.55.18. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 9.20. 9.20. 2.22.18. 16.35.2000. 5.9-0.5.5. 4.20. 1.11.14.
1420 s34-t27-tg1. 10.30.55.19. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1421 s35-t28-sut1. 10.30.55.20. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 9.20. 9.20. 2.22.18. 16.35.2000. 5.9-0.5.5. 4.20. 1.11.14.
1422 s36-t28-tg1. 10.30.55.21. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1423 s37-t29-sut1. 10.30.55.22. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 9.20. 9.20. 2.22.18. 16.35.2000. 5.9-0.5.5. 4.20. 1.11.14.
1424 s38-t29-tg1. 10.30.55.23. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.