2 title: "Generic Segmentation Offload"
6 # Generic Segmentation Offload
10 Generic Segmentation Offload (GSO) reduces per-packet processing
11 overhead by enabling applications to pass a multi-packet buffer to
12 (v)NIC and process a smaller number of large packets (e.g. frame size of
13 64 KB), instead of processing higher numbers of small packets (e.g.
14 frame size of 1500 B), thus reducing per-packet overhead.
16 GSO tests for VPP vhostuser and tapv2 interfaces. All tests cases use iPerf3
17 client and server applications running TCP/IP as a traffic generator. For
18 performance comparison the same tests are run without GSO enabled.
20 ## GSO Test Topologies
22 Two VPP GSO test topologies are implemented:
24 1. iPerfC_GSOvirtio_LinuxVM --- GSOvhost_VPP_GSOvhost --- iPerfS_GSOvirtio_LinuxVM
26 - Tests VPP GSO on vhostuser interfaces and interaction with Linux
27 virtio with GSO enabled.
29 2. iPerfC_GSOtap_LinuxNspace --- GSOtapv2_VPP_GSOtapv2 --- iPerfS_GSOtap_LinuxNspace
31 - Tests VPP GSO on tapv2 interfaces and interaction with Linux tap
36 - iPerfC (client) and iPerfS (server) run in TCP/IP mode without upper
38 - Trial duration is set to 30 sec.
39 - iPerfC, iPerfS and VPP run in the single SUT node.
42 ## VPP GSOtap Topology
46 VPP GSOtap tests are executed without using hyperthreading. VPP worker runs on
47 a single core. Multi-core tests are not executed. Each interface belongs to
48 separate namespace. Following core pinning scheme is used:
50 - 1t1c (rxq=1, rx_qsz=4096, tx_qsz=4096)
51 - system isolated: 0,28,56,84
58 ### iPerf3 Server Configuration
60 iPerf3 version used 3.7
62 $ sudo -E -S ip netns exec tap1_namespace iperf3 \
63 --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity <X>
65 For the full iPerf3 reference please see:
66 [iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
69 ### iPerf3 Client Configuration
71 iPerf3 version used 3.7
73 $ sudo -E -S ip netns exec tap1_namespace iperf3 \
74 --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity <X> --zerocopy
76 For the full iPerf3 reference please see:
77 [iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
80 ## VPP GSOvhost Topology
84 VPP GSOvhost tests are executed without using hyperthreading. VPP worker runs
85 on a single core. Multi-core tests are not executed. Following core pinning
88 - 1t1c (rxq=1, rx_qsz=1024, tx_qsz=1024)
89 - system isolated: 0,28,56,84
92 - vm-iperf-s: 3,4,5,6,7
93 - vm-iperf-c: 8,9,10,11,12
97 ### iPerf3 Server Configuration
99 iPerf3 version used 3.7
102 --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity X
104 For the full iPerf3 reference please see:
105 [iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
108 ### iPerf3 Client Configuration
110 iPerf3 version used 3.7
113 --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity X --zerocopy
115 For the full iPerf3 reference please see:
116 [iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).