1 # SuperMicro Cascadelake Servers - HW and BIOS Configuration
3 1. [Linux lscpu](#linux-lscpu)
4 1. [Linux dmidecode](#dmidecode)
5 1. [Linux dmidecode pci](#linux-dmidecode-pci)
6 1. [Linux dmidecode memory](#linux-dmidecode-memory)
7 1. [Xeon Clx Server BIOS Configuration](#xeon-clx-server-bios-configuration)
8 1. [Boot Feature](#boot-feature)
9 1. [CPU Configuration](#cpu-configuration)
10 1. [Advanced Power Management Configuration](#advanced-power-management-configuration)
11 1. [CPU P State Control](#cpu-p-state-control)
12 1. [Hardware PM State Control](#hardware-pm-state-control)
13 1. [CPU C State Control](#cpu-c-state-control)
14 1. [Package C State Control](#package-c-state-control)
15 1. [CPU T State Control](#cpu-t-state-control)
16 1. [Chipset Configuration](#chipset-configuration)
17 1. [North Bridge](#north-bridge)
18 1. [UPI Configuration](#upi-configuration)
19 1. [Memory Configuration](#memory-configuration)
20 1. [IIO Configuration](#iio-configuration)
21 1. [CPU1 Configuration](#cpu1-configuration)
22 1. [CPU2 Configuration](#cpu2-configuration)
23 1. [South Bridge](#south-bridge)
24 1. [PCIe/PCI/PnP Configuration](#pciepcipnp-configuration)
25 1. [ACPI Settings](#acpi-settings)
26 1. [Xeon Clx Server Firmware Inventory](#xeon-clx-server-firmware-inventory)
33 CPU op-mode(s): 32-bit, 64-bit
34 Byte Order: Little Endian
36 On-line CPU(s) list: 0-111
38 Core(s) per socket: 28
41 Vendor ID: GenuineIntel
44 Model name: Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz
53 NUMA node0 CPU(s): 0-27,56-83
54 NUMA node1 CPU(s): 28-55,84-111
55 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
56 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
57 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
58 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
59 tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
60 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
61 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
62 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1
63 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx
64 smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
65 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
66 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
72 CPU op-mode(s): 32-bit, 64-bit
73 Byte Order: Little Endian
75 On-line CPU(s) list: 0-95
77 Core(s) per socket: 24
80 Vendor ID: GenuineIntel
83 Model name: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
92 NUMA node0 CPU(s): 0-23,48-71
93 NUMA node1 CPU(s): 24-47,72-95
94 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
95 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
96 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
97 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2
98 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
99 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
100 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
101 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle
102 avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap
103 clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
104 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
105 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
112 Getting SMBIOS data from sysfs.
113 SMBIOS 3.1.2 present.
116 Handle 0x0000, DMI type 0, 26 bytes
118 Vendor: American Megatrends Inc.
120 Release Date: 03/27/2019
127 BIOS shadowing is allowed
128 Boot from CD is supported
129 Selectable boot is supported
132 5.25"/1.2 MB floppy services are supported (int 13h)
133 3.5"/720 kB floppy services are supported (int 13h)
134 3.5"/2.88 MB floppy services are supported (int 13h)
135 Print screen service is supported (int 5h)
136 Serial services are supported (int 14h)
137 Printer services are supported (int 17h)
139 USB legacy is supported
140 BIOS boot specification is supported
141 Targeted content distribution is supported
145 Handle 0x0001, DMI type 1, 27 bytes
147 Manufacturer: Supermicro
148 Product Name: SYS-7049GP-TRT
150 Serial Number: S291427X9525476
151 UUID: 00000000-0000-0000-0000-AC1F6BACD7BA
152 Wake-up Type: Power Switch
153 SKU Number: To be filled by O.E.M.
154 Family: To be filled by O.E.M.
156 Handle 0x0002, DMI type 2, 15 bytes
157 Base Board Information
158 Manufacturer: Supermicro
159 Product Name: X11DPG-QT
161 Serial Number: VM189S007860
162 Asset Tag: To be filled by O.E.M.
164 Board is a hosting board
166 Location In Chassis: To be filled by O.E.M.
167 Chassis Handle: 0x0003
169 Contained Object Handles: 0
171 Handle 0x0003, DMI type 3, 22 bytes
173 Manufacturer: Supermicro
177 Serial Number: C7470KH37A30566
178 Asset Tag: To be filled by O.E.M.
180 Power Supply State: Safe
182 Security Status: None
183 OEM Information: 0x00000000
185 Number Of Power Cords: 1
186 Contained Elements: 0
187 SKU Number: To be filled by O.E.M.
189 Handle 0x0055, DMI type 4, 48 bytes
190 Processor Information
191 Socket Designation: CPU1
192 Type: Central Processor
194 Manufacturer: Intel(R) Corporation
195 ID: 57 06 05 00 FF FB EB BF
196 Signature: Type 0, Family 6, Model 85, Stepping 7
198 FPU (Floating-point unit on-chip)
199 VME (Virtual mode extension)
200 DE (Debugging extension)
201 PSE (Page size extension)
202 TSC (Time stamp counter)
203 MSR (Model specific registers)
204 PAE (Physical address extension)
205 MCE (Machine check exception)
206 CX8 (CMPXCHG8 instruction supported)
207 APIC (On-chip APIC hardware supported)
208 SEP (Fast system call)
209 MTRR (Memory type range registers)
210 PGE (Page global enable)
211 MCA (Machine check architecture)
212 CMOV (Conditional move instruction supported)
213 PAT (Page attribute table)
214 PSE-36 (36-bit page size extension)
215 CLFSH (CLFLUSH instruction supported)
217 ACPI (ACPI supported)
218 MMX (MMX technology supported)
219 FXSR (FXSAVE and FXSTOR instructions supported)
220 SSE (Streaming SIMD extensions)
221 SSE2 (Streaming SIMD extensions 2)
223 HTT (Multi-threading)
224 TM (Thermal monitor supported)
225 PBE (Pending break enabled)
226 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
228 External Clock: 100 MHz
230 Current Speed: 2300 MHz
231 Status: Populated, Enabled
232 Upgrade: Socket LGA3647-1
233 L1 Cache Handle: 0x0052
234 L2 Cache Handle: 0x0053
235 L3 Cache Handle: 0x0054
236 Serial Number: Not Specified
238 Part Number: Not Specified
247 Enhanced Virtualization
248 Power/Performance Control
250 Handle 0x0059, DMI type 4, 48 bytes
251 Processor Information
252 Socket Designation: CPU2
253 Type: Central Processor
255 Manufacturer: Intel(R) Corporation
256 ID: 57 06 05 00 FF FB EB BF
257 Signature: Type 0, Family 6, Model 85, Stepping 7
259 FPU (Floating-point unit on-chip)
260 VME (Virtual mode extension)
261 DE (Debugging extension)
262 PSE (Page size extension)
263 TSC (Time stamp counter)
264 MSR (Model specific registers)
265 PAE (Physical address extension)
266 MCE (Machine check exception)
267 CX8 (CMPXCHG8 instruction supported)
268 APIC (On-chip APIC hardware supported)
269 SEP (Fast system call)
270 MTRR (Memory type range registers)
271 PGE (Page global enable)
272 MCA (Machine check architecture)
273 CMOV (Conditional move instruction supported)
274 PAT (Page attribute table)
275 PSE-36 (36-bit page size extension)
276 CLFSH (CLFLUSH instruction supported)
278 ACPI (ACPI supported)
279 MMX (MMX technology supported)
280 FXSR (FXSAVE and FXSTOR instructions supported)
281 SSE (Streaming SIMD extensions)
282 SSE2 (Streaming SIMD extensions 2)
284 HTT (Multi-threading)
285 TM (Thermal monitor supported)
286 PBE (Pending break enabled)
287 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
289 External Clock: 100 MHz
291 Current Speed: 2300 MHz
292 Status: Populated, Enabled
293 Upgrade: Socket LGA3647-1
294 L1 Cache Handle: 0x0056
295 L2 Cache Handle: 0x0057
296 L3 Cache Handle: 0x0058
297 Serial Number: Not Specified
299 Part Number: Not Specified
308 Enhanced Virtualization
309 Power/Performance Control
312 ## Linux dmidecode pci
316 Handle 0x000B, DMI type 9, 17 bytes
317 System Slot Information
318 Designation: CPU1 SLOT2 PCI-E 3.0 X16
319 Type: x16 PCI Express 3 x16
320 Current Usage: In Use
326 PME signal is supported
327 Bus Address: 0000:18:00.0
329 Handle 0x000C, DMI type 9, 17 bytes
330 System Slot Information
331 Designation: CPU1 SLOT4 PCI-E 3.0 X16
332 Type: x16 PCI Express 3 x16
333 Current Usage: In Use
339 PME signal is supported
340 Bus Address: 0000:3b:00.0
342 Handle 0x000D, DMI type 9, 17 bytes
343 System Slot Information
344 Designation: CPU2 SLOT6 PCI-E 3.0 X16
345 Type: x16 PCI Express 3 x16
346 Current Usage: Available
352 PME signal is supported
353 Bus Address: 0000:ff:00.0
355 Handle 0x000E, DMI type 9, 17 bytes
356 System Slot Information
357 Designation: CPU2 SLOT8 PCI-E 3.0 X16
358 Type: x16 PCI Express 3 x16
359 Current Usage: Available
365 PME signal is supported
366 Bus Address: 0000:ff:00.0
368 Handle 0x000F, DMI type 9, 17 bytes
369 System Slot Information
370 Designation: CPU1 SLOT9 PCI-E 3.0 X16
371 Type: x16 PCI Express 3 x16
372 Current Usage: Available
378 PME signal is supported
379 Bus Address: 0000:ff:00.0
381 Handle 0x0010, DMI type 9, 17 bytes
382 System Slot Information
383 Designation: CPU2 SLOT10 PCI-E 3.0 X16
384 Type: x16 PCI Express 3 x16
385 Current Usage: Available
391 PME signal is supported
392 Bus Address: 0000:ff:00.0
394 Handle 0x0011, DMI type 9, 17 bytes
395 System Slot Information
396 Designation: CPU2 SLOT11 PCI-E 3.0 X4(IN X8)
397 Type: x4 PCI Express 3 x8
398 Current Usage: Available
404 PME signal is supported
405 Bus Address: 0000:ff:00.0
407 Handle 0x0012, DMI type 9, 17 bytes
408 System Slot Information
409 Designation: M.2 CONNECTOR
410 Type: x4 M.2 Socket 2
411 Current Usage: Available
416 PME signal is supported
417 Bus Address: 0000:ff:00.0
420 ## Linux dmidecode memory
423 $ dmidecode -t memory
424 Handle 0x0021, DMI type 16, 23 bytes
425 Physical Memory Array
426 Location: System Board Or Motherboard
428 Error Correction Type: Single-bit ECC
429 Maximum Capacity: 2304 GB
430 Error Information Handle: Not Provided
433 Handle 0x0023, DMI type 17, 84 bytes
436 Error Information Handle: Not Provided
443 Bank Locator: P0_Node0_Channel0_Dimm0
445 Type Detail: Synchronous
447 Manufacturer: SK Hynix
448 Serial Number: 93275F0E
449 Asset Tag: P1-DIMMA1_AssetTag (date:19/22)
450 Part Number: HMA82GR7CJR8N-WM
452 Configured Clock Speed: 2934 MT/s
453 Minimum Voltage: 1.2 V
454 Maximum Voltage: 1.2 V
455 Configured Voltage: 1.2 V
457 Handle 0x0024, DMI type 17, 84 bytes
460 Error Information Handle: Not Provided
463 Size: No Module Installed
467 Bank Locator: P0_Node0_Channel0_Dimm1
471 Manufacturer: NO DIMM
472 Serial Number: NO DIMM
476 Configured Clock Speed: Unknown
477 Minimum Voltage: 1.2 V
478 Maximum Voltage: 1.2 V
479 Configured Voltage: 1.2 V
481 Handle 0x0025, DMI type 17, 84 bytes
484 Error Information Handle: Not Provided
491 Bank Locator: P0_Node0_Channel1_Dimm0
493 Type Detail: Synchronous
495 Manufacturer: SK Hynix
496 Serial Number: 93275F1F
497 Asset Tag: P1-DIMMB1_AssetTag (date:19/22)
498 Part Number: HMA82GR7CJR8N-WM
500 Configured Clock Speed: 2934 MT/s
501 Minimum Voltage: 1.2 V
502 Maximum Voltage: 1.2 V
503 Configured Voltage: 1.2 V
505 Handle 0x0027, DMI type 17, 84 bytes
508 Error Information Handle: Not Provided
515 Bank Locator: P0_Node0_Channel2_Dimm0
517 Type Detail: Synchronous
519 Manufacturer: SK Hynix
520 Serial Number: 93275F07
521 Asset Tag: P1-DIMMC1_AssetTag (date:19/22)
522 Part Number: HMA82GR7CJR8N-WM
524 Configured Clock Speed: 2934 MT/s
525 Minimum Voltage: 1.2 V
526 Maximum Voltage: 1.2 V
527 Configured Voltage: 1.2 V
529 Handle 0x002B, DMI type 17, 84 bytes
532 Error Information Handle: Not Provided
539 Bank Locator: P0_Node1_Channel0_Dimm0
541 Type Detail: Synchronous
543 Manufacturer: SK Hynix
544 Serial Number: 93275F02
545 Asset Tag: P1-DIMMD1_AssetTag (date:19/22)
546 Part Number: HMA82GR7CJR8N-WM
548 Configured Clock Speed: 2934 MT/s
549 Minimum Voltage: 1.2 V
550 Maximum Voltage: 1.2 V
551 Configured Voltage: 1.2 V
553 Handle 0x002C, DMI type 17, 84 bytes
556 Error Information Handle: Not Provided
559 Size: No Module Installed
563 Bank Locator: P0_Node1_Channel0_Dimm1
567 Manufacturer: NO DIMM
568 Serial Number: NO DIMM
572 Configured Clock Speed: Unknown
573 Minimum Voltage: 1.2 V
574 Maximum Voltage: 1.2 V
575 Configured Voltage: 1.2 V
577 Handle 0x002D, DMI type 17, 84 bytes
580 Error Information Handle: Not Provided
587 Bank Locator: P0_Node1_Channel1_Dimm0
589 Type Detail: Synchronous
591 Manufacturer: SK Hynix
592 Serial Number: 93275F19
593 Asset Tag: P1-DIMME1_AssetTag (date:19/22)
594 Part Number: HMA82GR7CJR8N-WM
596 Configured Clock Speed: 2934 MT/s
597 Minimum Voltage: 1.2 V
598 Maximum Voltage: 1.2 V
599 Configured Voltage: 1.2 V
601 Handle 0x002F, DMI type 17, 84 bytes
604 Error Information Handle: Not Provided
611 Bank Locator: P0_Node1_Channel2_Dimm0
613 Type Detail: Synchronous
615 Manufacturer: SK Hynix
616 Serial Number: 93275FD3
617 Asset Tag: P1-DIMMF1_AssetTag (date:19/22)
618 Part Number: HMA82GR7CJR8N-WM
620 Configured Clock Speed: 2934 MT/s
621 Minimum Voltage: 1.2 V
622 Maximum Voltage: 1.2 V
623 Configured Voltage: 1.2 V
625 Handle 0x0031, DMI type 16, 23 bytes
626 Physical Memory Array
627 Location: System Board Or Motherboard
629 Error Correction Type: Single-bit ECC
630 Maximum Capacity: 2304 GB
631 Error Information Handle: Not Provided
634 Handle 0x0033, DMI type 17, 84 bytes
637 Error Information Handle: Not Provided
644 Bank Locator: P1_Node0_Channel0_Dimm0
646 Type Detail: Synchronous
648 Manufacturer: SK Hynix
649 Serial Number: 93275FE2
650 Asset Tag: P2-DIMMA1_AssetTag (date:19/22)
651 Part Number: HMA82GR7CJR8N-WM
653 Configured Clock Speed: 2934 MT/s
654 Minimum Voltage: 1.2 V
655 Maximum Voltage: 1.2 V
656 Configured Voltage: 1.2 V
658 Handle 0x0034, DMI type 17, 84 bytes
661 Error Information Handle: Not Provided
664 Size: No Module Installed
668 Bank Locator: P1_Node0_Channel0_Dimm1
672 Manufacturer: NO DIMM
673 Serial Number: NO DIMM
677 Configured Clock Speed: Unknown
678 Minimum Voltage: 1.2 V
679 Maximum Voltage: 1.2 V
680 Configured Voltage: 1.2 V
682 Handle 0x0035, DMI type 17, 84 bytes
685 Error Information Handle: Not Provided
692 Bank Locator: P1_Node0_Channel1_Dimm0
694 Type Detail: Synchronous
696 Manufacturer: SK Hynix
697 Serial Number: 93276001
698 Asset Tag: P2-DIMMB1_AssetTag (date:19/22)
699 Part Number: HMA82GR7CJR8N-WM
701 Configured Clock Speed: 2934 MT/s
702 Minimum Voltage: 1.2 V
703 Maximum Voltage: 1.2 V
704 Configured Voltage: 1.2 V
706 Handle 0x0037, DMI type 17, 84 bytes
709 Error Information Handle: Not Provided
716 Bank Locator: P1_Node0_Channel2_Dimm0
718 Type Detail: Synchronous
720 Manufacturer: SK Hynix
721 Serial Number: 93276005
722 Asset Tag: P2-DIMMC1_AssetTag (date:19/22)
723 Part Number: HMA82GR7CJR8N-WM
725 Configured Clock Speed: 2934 MT/s
726 Minimum Voltage: 1.2 V
727 Maximum Voltage: 1.2 V
728 Configured Voltage: 1.2 V
730 Handle 0x0039, DMI type 16, 23 bytes
731 Physical Memory Array
732 Location: System Board Or Motherboard
734 Error Correction Type: Single-bit ECC
735 Maximum Capacity: 2304 GB
736 Error Information Handle: Not Provided
739 Handle 0x003B, DMI type 17, 84 bytes
742 Error Information Handle: Not Provided
749 Bank Locator: P1_Node1_Channel0_Dimm0
751 Type Detail: Synchronous
753 Manufacturer: SK Hynix
754 Serial Number: 93275F44
755 Asset Tag: P2-DIMMD1_AssetTag (date:19/22)
756 Part Number: HMA82GR7CJR8N-WM
758 Configured Clock Speed: 2934 MT/s
759 Minimum Voltage: 1.2 V
760 Maximum Voltage: 1.2 V
761 Configured Voltage: 1.2 V
763 Handle 0x003C, DMI type 17, 84 bytes
766 Error Information Handle: Not Provided
769 Size: No Module Installed
773 Bank Locator: P1_Node1_Channel0_Dimm1
777 Manufacturer: NO DIMM
778 Serial Number: NO DIMM
782 Configured Clock Speed: Unknown
783 Minimum Voltage: 1.2 V
784 Maximum Voltage: 1.2 V
785 Configured Voltage: 1.2 V
787 Handle 0x003D, DMI type 17, 84 bytes
790 Error Information Handle: Not Provided
797 Bank Locator: P1_Node1_Channel1_Dimm0
799 Type Detail: Synchronous
801 Manufacturer: SK Hynix
802 Serial Number: 93275FDF
803 Asset Tag: P2-DIMME1_AssetTag (date:19/22)
804 Part Number: HMA82GR7CJR8N-WM
806 Configured Clock Speed: 2934 MT/s
807 Minimum Voltage: 1.2 V
808 Maximum Voltage: 1.2 V
809 Configured Voltage: 1.2 V
811 Handle 0x003F, DMI type 17, 84 bytes
814 Error Information Handle: Not Provided
821 Bank Locator: P1_Node1_Channel2_Dimm0
823 Type Detail: Synchronous
825 Manufacturer: SK Hynix
826 Serial Number: 93275FDD
827 Asset Tag: P2-DIMMF1_AssetTag (date:19/22)
828 Part Number: HMA82GR7CJR8N-WM
830 Configured Clock Speed: 2934 MT/s
831 Minimum Voltage: 1.2 V
832 Maximum Voltage: 1.2 V
833 Configured Voltage: 1.2 V
836 ## Xeon CLX Server BIOS Configuration - TG
841 | Quiet Boot [Enabled] |Boot option |
843 | Option ROM Messages [Force BIOS] | |
844 | Bootup NumLock State [On] | |
845 | Wait For "F1" If Error [Enabled] | |
846 | INT19 Trap Response [Immediate] | |
847 | Re-try Boot [Disabled] | |
848 | Install Windows 7 USB support [Disabled] | |
849 | Port 61h Bit-4 Emulation [Disabled] | |
851 | Power Configuration | |
852 | Watch Dog Function [Disabled] | |
853 | Restore on AC Power Loss [Last State] | |
854 | Power Button Function [Instant Off] | |
857 ### CPU Configuration
860 | Processor Configuration ^|Enables Hyper Threading |
861 | -------------------------------------------------- *|(Software Method to |
862 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
863 | Processor Socket CPU1 | CPU2 *|Processor threads. |
864 | Processor ID 00050657* | 00050657 *| |
865 | Processor Frequency 2.700GHz | 2.700GHz *| |
866 | Processor Max Ratio 1BH | 1BH *| |
867 | Processor Min Ratio 0AH | 0AH *| |
868 | Microcode Revision 0500002C | 0500002C *| |
869 | L1 Cache RAM 64KB | 64KB *| |
870 | L2 Cache RAM 1024KB | 1024KB *| |
871 | L3 Cache RAM 39424KB | 39424KB *| |
872 | Processor 0 Version *| |
873 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
874 | Processor 1 Version *| |
875 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
876 | *|-----------------------------|
877 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
878 | Cores Enabled 0 *|^v: Select Item |
879 | Monitor/Mwait [Auto] *|Enter: Select |
880 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
881 | Intel Virtualization Technology [Enable] +|F1: General Help |
882 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
883 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
884 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
885 | DCU Streamer Prefetcher [Enable] | |
886 | DCU IP Prefetcher [Enable] | |
887 | LLC Prefetch [Disable] | |
888 | Extended APIC [Disable] | |
889 | AES-NI [Enable] | |
890 |> Advanced Power Management Configuration | |
893 #### Advanced Power Management Configuration
896 | Advanced Power Management Configuration |Switch CPU Power Management |
897 | -------------------------------------------------- |profile |
898 | Power Technology [Custom] | |
899 | Power Performance Tuning [BIOS Controls EPB] | |
900 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
901 |> CPU P State Control | |
902 |> Hardware PM State Control | |
903 |> CPU C State Control | |
904 |> Package C State Control | |
905 |> CPU T State Control | |
908 ##### CPU P State Control
911 | CPU P State Control |EIST allows the processor |
912 | |to dynamically adjust |
913 | SpeedStep (P-States) [Disable] |frequency and voltage based |
914 | EIST PSD Function [HW_ALL] |on power versus performance |
919 ##### Hardware PM State Control
922 | Hardware PM State Control |If set to Disable, hardware ^|
923 | |will choose a P-state *|
924 | Hardware P-States [Disable] |setting for the system *|
925 | |based on an OS request. *|
926 | |If set to Native Mode, *|
927 | |hardware will choose a *|
928 | |P-state setting based on OS *|
930 | |If set to Native Mode with *|
931 | |No Legacy Support, hardware *|
932 | |will choose a P-state *|
933 | |setting independently *|
934 | |without OS guidance. +|
935 | |If set to Out of Band Mode, +|
936 | |hardware autonomously v|
939 ##### CPU C State Control
942 | CPU C State Control |Select Enable to support |
943 | |Autonomous Core C-State |
944 | Autonomous Core C-State [Disable] |control which will allow |
945 | CPU C6 report [Disable] |the processor core to |
946 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
947 | |automatically and |
951 ##### Package C State Control
954 | Package C State Control |Limit the lowest package |
955 | |level C-State to |
956 | Package C State [C0/C1 state] |processors. Lower package |
957 | |C-State lower processor |
958 | |power consumption upon idle. |
961 ##### CPU T State Control
964 | CPU T State Control |Enable/Disable CPU |
965 | |throttling by OS. |
966 | Software Controlled T-States [Disable] |Throttling reduces power |
970 #### Chipset Configuration
973 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
974 | system to malfunction. | |
982 |> UPI Configuration |Displays and provides |
983 |> Memory Configuration |option to change the UPI |
984 |> IIO Configuration |Settings |
987 ##### UPI Configuration
990 | UPI Configuration |Use this feature to select |
991 | -------------------------------------------------- |the degrading precedence |
992 | Number of CPU 2 |option for Ultra Path |
993 | Number of Active UPI Link 3 |Interconnect connections. |
994 | Current UPI Link Speed Fast |Select Topology Precedent |
995 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
996 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
997 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
998 | 00000000FFFFFFFF |Precedent to degrade UPI |
999 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
1000 | Degrade Precedence [Topology Precedence] |are in conflict. |
1001 | Link L0p Enable [Disable] | |
1002 | Link L1 Enable [Disable] | |
1003 | IO Directory Cache (IODC) [Auto] | |
1005 | XPT Prefetch [Disable] | |
1006 | KTI Prefetch [Enable] |-----------------------------|
1007 | Local/Remote Threshold [Auto] |><: Select Screen |
1008 | Stale AtoS [Auto] |^v: Select Item |
1009 | LLC Dead Line Alloc [Enable] |Enter: Select |
1010 | Isoc Mode [Auto] |+/-: Change Opt. |
1013 ##### Memory Configuration
1016 | |Select POR to enforce POR |
1017 | -------------------------------------------------- |restrictions for DDR4 |
1018 | Integrated Memory Controller (iMC) |frequency and voltage |
1019 | -------------------------------------------------- |programming |
1021 | Enforce POR [POR] | |
1022 | PPR Type [Hard PPR] | |
1023 | Enhanced PPR [Disable] | |
1024 | Operation Mode [Test and Repair] | |
1025 | Memory Frequency [2933] | |
1026 | Data Scrambling for DDR4 [Auto] | |
1027 | tCCD_L Relaxation [Auto] | |
1028 | tRWSR Relaxation [Disable] | |
1029 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
1030 | 2x Refresh [Auto] | |
1031 | Page Policy [Auto] | |
1032 | IMC Interleaving [2-way Interleave] |-----------------------------|
1033 |> Memory Topology |><: Select Screen |
1034 |> Memory RAS Configuration |^v: Select Item |
1037 ##### IIO Configuration
1040 | IIO Configuration |Expose IIO DFX devices and |
1041 | -------------------------------------------------- |other CPU devices like PMON |
1043 | EV DFX Features [Disable] | |
1044 |> CPU1 Configuration | |
1045 |> CPU2 Configuration | |
1046 |> IOAT Configuration | |
1047 |> Intel. VT for Directed I/O (VT-d) | |
1048 |> Intel. VMD technology | |
1050 | IIO-PCIE Express Global Options | |
1051 | ======================================== | |
1052 | PCI-E Completion Timeout Disable [No] | |
1055 ##### CPU1 Configuration
1058 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1059 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1060 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1061 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1062 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1063 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1066 ##### CPU2 Configuration
1069 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1070 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1071 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1072 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1073 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1074 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1080 | |Enables Legacy USB support. |
1081 | USB Module Version 21 |AUTO option disables legacy |
1082 | |support if no USB devices |
1083 | USB Devices: |are connected. DISABLE |
1084 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1085 | |devices available only for |
1086 | Legacy USB Support [Enabled] |EFI applications. |
1087 | XHCI Hand-off [Enabled] | |
1088 | Port 60/64 Emulation [Enabled] | |
1089 | PCIe PLL SSC [Disable] | |
1090 | Real USB Wake Up [Enabled] | |
1091 | Front USB Wake Up [Enabled] | |
1094 | Azalia PME Enable [Disabled] | |
1097 ### PCIe/PCI/PnP Configuration
1100 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1101 | *|capable Devices to be |
1102 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1103 | Above 4G Decoding [Enabled] *|Space (Only if System |
1104 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1105 | ARI Support [Enabled] *|Decoding). |
1106 | MMIO High Base [56T] *| |
1107 | MMIO High Granularity Size [256G] *| |
1108 | Maximum Read Request [Auto] *| |
1109 | MMCFG Base [2G] *| |
1110 | NVMe Firmware Source [Vendor Defined *| |
1112 | VGA Priority [Onboard] *| |
1113 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1114 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1115 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1116 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1117 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1118 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1119 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1120 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1121 | Bus Master Enable [Enabled] +|F1: General Help |
1122 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1123 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1124 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1125 |> Network Stack Configuration | |
1131 | ACPI Settings |Enable or Disable Non |
1132 | |uniform Memory Access |
1133 | NUMA [Enabled] |(NUMA). |
1134 | WHEA Support [Enabled] | |
1135 | High Precision Event Timer [Enabled] | |
1138 ## Xeon CLX Server BIOS Configuration - DUT
1143 | Quiet Boot [Enabled] |Boot option |
1145 | Option ROM Messages [Force BIOS] | |
1146 | Bootup NumLock State [On] | |
1147 | Wait For "F1" If Error [Enabled] | |
1148 | INT19 Trap Response [Immediate] | |
1149 | Re-try Boot [Disabled] | |
1150 | Install Windows 7 USB support [Disabled] | |
1151 | Port 61h Bit-4 Emulation [Disabled] | |
1153 | Power Configuration | |
1154 | Watch Dog Function [Disabled] | |
1155 | Restore on AC Power Loss [Last State] | |
1156 | Power Button Function [Instant Off] | |
1159 ### CPU Configuration
1162 |--------------------------------------------------------------------+-----------------------------\
1163 | Processor Configuration ^|Enables Hyper Threading |
1164 | -------------------------------------------------- *|(Software Method to |
1165 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
1166 | Processor Socket CPU1 | CPU2 *|Processor threads. |
1167 | Processor ID 00050657* | 00050657 *| |
1168 | Processor Frequency 2.300GHz | 2.300GHz *| |
1169 | Processor Max Ratio 17H | 17H *| |
1170 | Processor Min Ratio 0AH | 0AH *| |
1171 | Microcode Revision 0500002C | 0500002C *| |
1172 | L1 Cache RAM 64KB | 64KB *| |
1173 | L2 Cache RAM 1024KB | 1024KB *| |
1174 | L3 Cache RAM 36608KB | 36608KB *| |
1175 | Processor 0 Version *| |
1176 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1177 | Processor 1 Version *| |
1178 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1179 | *|-----------------------------|
1180 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
1181 | Cores Enabled 0 *|^v: Select Item |
1182 | Monitor/Mwait [Auto] *|Enter: Select |
1183 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
1184 | Intel Virtualization Technology [Enable] +|F1: General Help |
1185 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
1186 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
1187 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
1188 | DCU Streamer Prefetcher [Enable] | |
1189 | DCU IP Prefetcher [Enable] | |
1190 | LLC Prefetch [Disable] | |
1191 | Extended APIC [Disable] | |
1192 | AES-NI [Enable] | |
1193 |> Advanced Power Management Configuration | |
1196 #### Advanced Power Management Configuration
1199 | Advanced Power Management Configuration |Switch CPU Power Management |
1200 | -------------------------------------------------- |profile |
1201 | Power Technology [Custom] | |
1202 | Power Performance Tuning [BIOS Controls EPB] | |
1203 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
1204 |> CPU P State Control | |
1205 |> Hardware PM State Control | |
1206 |> CPU C State Control | |
1207 |> Package C State Control | |
1208 |> CPU T State Control | |
1211 ##### CPU P State Control
1214 | CPU P State Control |EIST allows the processor |
1215 | |to dynamically adjust |
1216 | SpeedStep (P-States) [Disable] |frequency and voltage based |
1217 | Activate PBF [Disable] |on power versus performance |
1218 | Configure PBF [Enable] |needs. |
1219 | EIST PSD Function [HW_ALL] | |
1222 ##### Hardware PM State Control
1225 | Hardware PM State Control |If set to Disable, hardware ^|
1226 | |will choose a P-state *|
1227 | Hardware P-States [Disable] |setting for the system *|
1228 | |based on an OS request. *|
1229 | |If set to Native Mode, *|
1230 | |hardware will choose a *|
1231 | |P-state setting based on OS *|
1233 | |If set to Native Mode with *|
1234 | |No Legacy Support, hardware *|
1235 | |will choose a P-state *|
1236 | |setting independently *|
1237 | |without OS guidance. +|
1238 | |If set to Out of Band Mode, +|
1239 | |hardware autonomously v|
1242 ##### CPU C State Control
1245 | CPU C State Control |Select Enable to support |
1246 | |Autonomous Core C-State |
1247 | Autonomous Core C-State [Disable] |control which will allow |
1248 | CPU C6 report [Disable] |the processor core to |
1249 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
1250 | |automatically and |
1254 ##### Package C State Control
1257 | Package C State Control |Limit the lowest package |
1258 | |level C-State to |
1259 | Package C State [C0/C1 state] |processors. Lower package |
1260 | |C-State lower processor |
1261 | |power consumption upon idle. |
1264 ##### CPU T State Control
1267 | CPU T State Control |Enable/Disable CPU |
1268 | |throttling by OS. |
1269 | Software Controlled T-States [Disable] |Throttling reduces power |
1273 #### Chipset Configuration
1276 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
1277 | system to malfunction. | |
1285 |> UPI Configuration |Displays and provides |
1286 |> Memory Configuration |option to change the UPI |
1287 |> IIO Configuration |Settings |
1290 ##### UPI Configuration
1293 | UPI Configuration |Use this feature to select |
1294 | -------------------------------------------------- |the degrading precedence |
1295 | Number of CPU 2 |option for Ultra Path |
1296 | Number of Active UPI Link 3 |Interconnect connections. |
1297 | Current UPI Link Speed Fast |Select Topology Precedent |
1298 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
1299 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
1300 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
1301 | 00000000FFFFFFFF |Precedent to degrade UPI |
1302 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
1303 | Degrade Precedence [Topology Precedence] |are in conflict. |
1304 | Link L0p Enable [Disable] | |
1305 | Link L1 Enable [Disable] | |
1306 | IO Directory Cache (IODC) [Auto] | |
1308 | XPT Prefetch [Disable] | |
1309 | KTI Prefetch [Enable] |-----------------------------|
1310 | Local/Remote Threshold [Auto] |><: Select Screen |
1311 | Stale AtoS [Auto] |^v: Select Item |
1312 | LLC Dead Line Alloc [Enable] |Enter: Select |
1313 | Isoc Mode [Auto] |+/-: Change Opt. |
1316 ##### Memory Configuration
1319 | |Select POR to enforce POR |
1320 | -------------------------------------------------- |restrictions for DDR4 |
1321 | Integrated Memory Controller (iMC) |frequency and voltage |
1322 | -------------------------------------------------- |programming |
1324 | Enforce POR [POR] | |
1325 | PPR Type [Hard PPR] | |
1326 | Enhanced PPR [Disable] | |
1327 | Operation Mode [Test and Repair] | |
1328 | Memory Frequency [2933] | |
1329 | Data Scrambling for DDR4 [Auto] | |
1330 | tCCD_L Relaxation [Auto] | |
1331 | tRWSR Relaxation [Disable] | |
1332 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
1333 | 2x Refresh [Auto] | |
1334 | Page Policy [Auto] | |
1335 | IMC Interleaving [2-way Interleave] |-----------------------------|
1336 |> Memory Topology |><: Select Screen |
1337 |> Memory RAS Configuration |^v: Select Item |
1340 ##### IIO Configuration
1343 | IIO Configuration |Expose IIO DFX devices and |
1344 | -------------------------------------------------- |other CPU devices like PMON |
1346 | EV DFX Features [Disable] | |
1347 |> CPU1 Configuration | |
1348 |> CPU2 Configuration | |
1349 |> IOAT Configuration | |
1350 |> Intel. VT for Directed I/O (VT-d) | |
1351 |> Intel. VMD technology | |
1353 | IIO-PCIE Express Global Options | |
1354 | ======================================== | |
1355 | PCI-E Completion Timeout Disable [No] | |
1358 ##### CPU1 Configuration
1361 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1362 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1363 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1364 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1365 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1366 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1369 ##### CPU2 Configuration
1372 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1373 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1374 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1375 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1376 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1377 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1383 | |Enables Legacy USB support. |
1384 | USB Module Version 21 |AUTO option disables legacy |
1385 | |support if no USB devices |
1386 | USB Devices: |are connected. DISABLE |
1387 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1388 | |devices available only for |
1389 | Legacy USB Support [Enabled] |EFI applications. |
1390 | XHCI Hand-off [Enabled] | |
1391 | Port 60/64 Emulation [Enabled] | |
1392 | PCIe PLL SSC [Disable] | |
1393 | Real USB Wake Up [Enabled] | |
1394 | Front USB Wake Up [Enabled] | |
1397 | Azalia PME Enable [Disabled] | |
1400 ### PCIe/PCI/PnP Configuration
1403 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1404 | *|capable Devices to be |
1405 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1406 | Above 4G Decoding [Enabled] *|Space (Only if System |
1407 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1408 | ARI Support [Enabled] *|Decoding). |
1409 | MMIO High Base [56T] *| |
1410 | MMIO High Granularity Size [256G] *| |
1411 | Maximum Read Request [Auto] *| |
1412 | MMCFG Base [2G] *| |
1413 | NVMe Firmware Source [Vendor Defined *| |
1415 | VGA Priority [Onboard] *| |
1416 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1417 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1418 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1419 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1420 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1421 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1422 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1423 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1424 | Bus Master Enable [Enabled] +|F1: General Help |
1425 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1426 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1427 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1428 |> Network Stack Configuration | |
1434 | ACPI Settings |Enable or Disable Non |
1435 | |uniform Memory Access |
1436 | NUMA [Enabled] |(NUMA). |
1437 | WHEA Support [Enabled] | |
1438 | High Precision Event Timer [Enabled] | |
1442 ## Xeon Clx Server Firmware Inventory
1445 Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core E810 Firmware. ice.
1446 s33-t27-sut1. 10.30.55.18. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1447 s34-t27-tg1. 10.30.55.19. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1448 s35-t28-sut1. 10.30.55.20. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1449 s36-t28-tg1. 10.30.55.21. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1450 s37-t29-sut1. 10.30.55.22. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1451 s38-t29-tg1. 10.30.55.23. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.