1 # SuperMicro Cascadelake Servers - HW and BIOS Configuration
3 1. [Linux lscpu](#linux-lscpu)
4 1. [Linux dmidecode](#dmidecode)
5 1. [Linux dmidecode pci](#linux-dmidecode-pci)
6 1. [Linux dmidecode memory](#linux-dmidecode-memory)
7 1. [Xeon Clx Server BIOS Configuration](#xeon-clx-server-bios-configuration)
8 1. [Boot Feature](#boot-feature)
9 1. [CPU Configuration](#cpu-configuration)
10 1. [Advanced Power Management Configuration](#advanced-power-management-configuration)
11 1. [CPU P State Control](#cpu-p-state-control)
12 1. [Hardware PM State Control](#hardware-pm-state-control)
13 1. [CPU C State Control](#cpu-c-state-control)
14 1. [Package C State Control](#package-c-state-control)
15 1. [CPU T State Control](#cpu-t-state-control)
16 1. [Chipset Configuration](#chipset-configuration)
17 1. [North Bridge](#north-bridge)
18 1. [UPI Configuration](#upi-configuration)
19 1. [Memory Configuration](#memory-configuration)
20 1. [IIO Configuration](#iio-configuration)
21 1. [CPU1 Configuration](#cpu1-configuration)
22 1. [CPU2 Configuration](#cpu2-configuration)
23 1. [South Bridge](#south-bridge)
24 1. [PCIe/PCI/PnP Configuration](#pciepcipnp-configuration)
25 1. [ACPI Settings](#acpi-settings)
26 1. [Xeon Clx Server Firmware Inventory](#xeon-clx-server-firmware-inventory)
32 CPU op-mode(s): 32-bit, 64-bit
33 Byte Order: Little Endian
35 On-line CPU(s) list: 0-111
37 Core(s) per socket: 28
40 Vendor ID: GenuineIntel
43 Model name: Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz
52 NUMA node0 CPU(s): 0-27,56-83
53 NUMA node1 CPU(s): 28-55,84-111
54 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
55 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
56 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
57 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
58 tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
59 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
60 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
61 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1
62 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx
63 smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
64 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
65 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
70 CPU op-mode(s): 32-bit, 64-bit
71 Byte Order: Little Endian
73 On-line CPU(s) list: 0-95
75 Core(s) per socket: 24
78 Vendor ID: GenuineIntel
81 Model name: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
90 NUMA node0 CPU(s): 0-23,48-71
91 NUMA node1 CPU(s): 24-47,72-95
92 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
93 cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
94 pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
95 nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2
96 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
97 tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
98 cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
99 ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle
100 avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap
101 clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
102 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
103 pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
110 Getting SMBIOS data from sysfs.
111 SMBIOS 3.1.2 present.
114 Handle 0x0000, DMI type 0, 26 bytes
116 Vendor: American Megatrends Inc.
118 Release Date: 03/27/2019
125 BIOS shadowing is allowed
126 Boot from CD is supported
127 Selectable boot is supported
130 5.25"/1.2 MB floppy services are supported (int 13h)
131 3.5"/720 kB floppy services are supported (int 13h)
132 3.5"/2.88 MB floppy services are supported (int 13h)
133 Print screen service is supported (int 5h)
134 Serial services are supported (int 14h)
135 Printer services are supported (int 17h)
137 USB legacy is supported
138 BIOS boot specification is supported
139 Targeted content distribution is supported
143 Handle 0x0001, DMI type 1, 27 bytes
145 Manufacturer: Supermicro
146 Product Name: SYS-7049GP-TRT
148 Serial Number: S291427X9525476
149 UUID: 00000000-0000-0000-0000-AC1F6BACD7BA
150 Wake-up Type: Power Switch
151 SKU Number: To be filled by O.E.M.
152 Family: To be filled by O.E.M.
154 Handle 0x0002, DMI type 2, 15 bytes
155 Base Board Information
156 Manufacturer: Supermicro
157 Product Name: X11DPG-QT
159 Serial Number: VM189S007860
160 Asset Tag: To be filled by O.E.M.
162 Board is a hosting board
164 Location In Chassis: To be filled by O.E.M.
165 Chassis Handle: 0x0003
167 Contained Object Handles: 0
169 Handle 0x0003, DMI type 3, 22 bytes
171 Manufacturer: Supermicro
175 Serial Number: C7470KH37A30566
176 Asset Tag: To be filled by O.E.M.
178 Power Supply State: Safe
180 Security Status: None
181 OEM Information: 0x00000000
183 Number Of Power Cords: 1
184 Contained Elements: 0
185 SKU Number: To be filled by O.E.M.
187 Handle 0x0055, DMI type 4, 48 bytes
188 Processor Information
189 Socket Designation: CPU1
190 Type: Central Processor
192 Manufacturer: Intel(R) Corporation
193 ID: 57 06 05 00 FF FB EB BF
194 Signature: Type 0, Family 6, Model 85, Stepping 7
196 FPU (Floating-point unit on-chip)
197 VME (Virtual mode extension)
198 DE (Debugging extension)
199 PSE (Page size extension)
200 TSC (Time stamp counter)
201 MSR (Model specific registers)
202 PAE (Physical address extension)
203 MCE (Machine check exception)
204 CX8 (CMPXCHG8 instruction supported)
205 APIC (On-chip APIC hardware supported)
206 SEP (Fast system call)
207 MTRR (Memory type range registers)
208 PGE (Page global enable)
209 MCA (Machine check architecture)
210 CMOV (Conditional move instruction supported)
211 PAT (Page attribute table)
212 PSE-36 (36-bit page size extension)
213 CLFSH (CLFLUSH instruction supported)
215 ACPI (ACPI supported)
216 MMX (MMX technology supported)
217 FXSR (FXSAVE and FXSTOR instructions supported)
218 SSE (Streaming SIMD extensions)
219 SSE2 (Streaming SIMD extensions 2)
221 HTT (Multi-threading)
222 TM (Thermal monitor supported)
223 PBE (Pending break enabled)
224 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
226 External Clock: 100 MHz
228 Current Speed: 2300 MHz
229 Status: Populated, Enabled
230 Upgrade: Socket LGA3647-1
231 L1 Cache Handle: 0x0052
232 L2 Cache Handle: 0x0053
233 L3 Cache Handle: 0x0054
234 Serial Number: Not Specified
236 Part Number: Not Specified
245 Enhanced Virtualization
246 Power/Performance Control
248 Handle 0x0059, DMI type 4, 48 bytes
249 Processor Information
250 Socket Designation: CPU2
251 Type: Central Processor
253 Manufacturer: Intel(R) Corporation
254 ID: 57 06 05 00 FF FB EB BF
255 Signature: Type 0, Family 6, Model 85, Stepping 7
257 FPU (Floating-point unit on-chip)
258 VME (Virtual mode extension)
259 DE (Debugging extension)
260 PSE (Page size extension)
261 TSC (Time stamp counter)
262 MSR (Model specific registers)
263 PAE (Physical address extension)
264 MCE (Machine check exception)
265 CX8 (CMPXCHG8 instruction supported)
266 APIC (On-chip APIC hardware supported)
267 SEP (Fast system call)
268 MTRR (Memory type range registers)
269 PGE (Page global enable)
270 MCA (Machine check architecture)
271 CMOV (Conditional move instruction supported)
272 PAT (Page attribute table)
273 PSE-36 (36-bit page size extension)
274 CLFSH (CLFLUSH instruction supported)
276 ACPI (ACPI supported)
277 MMX (MMX technology supported)
278 FXSR (FXSAVE and FXSTOR instructions supported)
279 SSE (Streaming SIMD extensions)
280 SSE2 (Streaming SIMD extensions 2)
282 HTT (Multi-threading)
283 TM (Thermal monitor supported)
284 PBE (Pending break enabled)
285 Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
287 External Clock: 100 MHz
289 Current Speed: 2300 MHz
290 Status: Populated, Enabled
291 Upgrade: Socket LGA3647-1
292 L1 Cache Handle: 0x0056
293 L2 Cache Handle: 0x0057
294 L3 Cache Handle: 0x0058
295 Serial Number: Not Specified
297 Part Number: Not Specified
306 Enhanced Virtualization
307 Power/Performance Control
310 ## Linux dmidecode pci
313 Handle 0x000B, DMI type 9, 17 bytes
314 System Slot Information
315 Designation: CPU1 SLOT2 PCI-E 3.0 X16
316 Type: x16 PCI Express 3 x16
317 Current Usage: In Use
323 PME signal is supported
324 Bus Address: 0000:18:00.0
326 Handle 0x000C, DMI type 9, 17 bytes
327 System Slot Information
328 Designation: CPU1 SLOT4 PCI-E 3.0 X16
329 Type: x16 PCI Express 3 x16
330 Current Usage: In Use
336 PME signal is supported
337 Bus Address: 0000:3b:00.0
339 Handle 0x000D, DMI type 9, 17 bytes
340 System Slot Information
341 Designation: CPU2 SLOT6 PCI-E 3.0 X16
342 Type: x16 PCI Express 3 x16
343 Current Usage: Available
349 PME signal is supported
350 Bus Address: 0000:ff:00.0
352 Handle 0x000E, DMI type 9, 17 bytes
353 System Slot Information
354 Designation: CPU2 SLOT8 PCI-E 3.0 X16
355 Type: x16 PCI Express 3 x16
356 Current Usage: Available
362 PME signal is supported
363 Bus Address: 0000:ff:00.0
365 Handle 0x000F, DMI type 9, 17 bytes
366 System Slot Information
367 Designation: CPU1 SLOT9 PCI-E 3.0 X16
368 Type: x16 PCI Express 3 x16
369 Current Usage: Available
375 PME signal is supported
376 Bus Address: 0000:ff:00.0
378 Handle 0x0010, DMI type 9, 17 bytes
379 System Slot Information
380 Designation: CPU2 SLOT10 PCI-E 3.0 X16
381 Type: x16 PCI Express 3 x16
382 Current Usage: Available
388 PME signal is supported
389 Bus Address: 0000:ff:00.0
391 Handle 0x0011, DMI type 9, 17 bytes
392 System Slot Information
393 Designation: CPU2 SLOT11 PCI-E 3.0 X4(IN X8)
394 Type: x4 PCI Express 3 x8
395 Current Usage: Available
401 PME signal is supported
402 Bus Address: 0000:ff:00.0
404 Handle 0x0012, DMI type 9, 17 bytes
405 System Slot Information
406 Designation: M.2 CONNECTOR
407 Type: x4 M.2 Socket 2
408 Current Usage: Available
413 PME signal is supported
414 Bus Address: 0000:ff:00.0
417 ## Linux dmidecode memory
420 Handle 0x0023, DMI type 17, 84 bytes
423 Error Information Handle: Not Provided
430 Bank Locator: P0_Node0_Channel0_Dimm0
432 Type Detail: Synchronous
434 Manufacturer: SK Hynix
435 Serial Number: 93275F0E
436 Asset Tag: P1-DIMMA1_AssetTag (date:19/22)
437 Part Number: HMA82GR7CJR8N-WM
439 Configured Clock Speed: 2934 MT/s
440 Minimum Voltage: 1.2 V
441 Maximum Voltage: 1.2 V
442 Configured Voltage: 1.2 V
444 Handle 0x0024, DMI type 17, 84 bytes
447 Error Information Handle: Not Provided
450 Size: No Module Installed
454 Bank Locator: P0_Node0_Channel0_Dimm1
458 Manufacturer: NO DIMM
459 Serial Number: NO DIMM
463 Configured Clock Speed: Unknown
464 Minimum Voltage: 1.2 V
465 Maximum Voltage: 1.2 V
466 Configured Voltage: 1.2 V
468 Handle 0x0025, DMI type 17, 84 bytes
471 Error Information Handle: Not Provided
478 Bank Locator: P0_Node0_Channel1_Dimm0
480 Type Detail: Synchronous
482 Manufacturer: SK Hynix
483 Serial Number: 93275F1F
484 Asset Tag: P1-DIMMB1_AssetTag (date:19/22)
485 Part Number: HMA82GR7CJR8N-WM
487 Configured Clock Speed: 2934 MT/s
488 Minimum Voltage: 1.2 V
489 Maximum Voltage: 1.2 V
490 Configured Voltage: 1.2 V
492 Handle 0x0027, DMI type 17, 84 bytes
495 Error Information Handle: Not Provided
502 Bank Locator: P0_Node0_Channel2_Dimm0
504 Type Detail: Synchronous
506 Manufacturer: SK Hynix
507 Serial Number: 93275F07
508 Asset Tag: P1-DIMMC1_AssetTag (date:19/22)
509 Part Number: HMA82GR7CJR8N-WM
511 Configured Clock Speed: 2934 MT/s
512 Minimum Voltage: 1.2 V
513 Maximum Voltage: 1.2 V
514 Configured Voltage: 1.2 V
516 Handle 0x002B, DMI type 17, 84 bytes
519 Error Information Handle: Not Provided
526 Bank Locator: P0_Node1_Channel0_Dimm0
528 Type Detail: Synchronous
530 Manufacturer: SK Hynix
531 Serial Number: 93275F02
532 Asset Tag: P1-DIMMD1_AssetTag (date:19/22)
533 Part Number: HMA82GR7CJR8N-WM
535 Configured Clock Speed: 2934 MT/s
536 Minimum Voltage: 1.2 V
537 Maximum Voltage: 1.2 V
538 Configured Voltage: 1.2 V
540 Handle 0x002C, DMI type 17, 84 bytes
543 Error Information Handle: Not Provided
546 Size: No Module Installed
550 Bank Locator: P0_Node1_Channel0_Dimm1
554 Manufacturer: NO DIMM
555 Serial Number: NO DIMM
559 Configured Clock Speed: Unknown
560 Minimum Voltage: 1.2 V
561 Maximum Voltage: 1.2 V
562 Configured Voltage: 1.2 V
564 Handle 0x002D, DMI type 17, 84 bytes
567 Error Information Handle: Not Provided
574 Bank Locator: P0_Node1_Channel1_Dimm0
576 Type Detail: Synchronous
578 Manufacturer: SK Hynix
579 Serial Number: 93275F19
580 Asset Tag: P1-DIMME1_AssetTag (date:19/22)
581 Part Number: HMA82GR7CJR8N-WM
583 Configured Clock Speed: 2934 MT/s
584 Minimum Voltage: 1.2 V
585 Maximum Voltage: 1.2 V
586 Configured Voltage: 1.2 V
588 Handle 0x002F, DMI type 17, 84 bytes
591 Error Information Handle: Not Provided
598 Bank Locator: P0_Node1_Channel2_Dimm0
600 Type Detail: Synchronous
602 Manufacturer: SK Hynix
603 Serial Number: 93275FD3
604 Asset Tag: P1-DIMMF1_AssetTag (date:19/22)
605 Part Number: HMA82GR7CJR8N-WM
607 Configured Clock Speed: 2934 MT/s
608 Minimum Voltage: 1.2 V
609 Maximum Voltage: 1.2 V
610 Configured Voltage: 1.2 V
612 Handle 0x0031, DMI type 16, 23 bytes
613 Physical Memory Array
614 Location: System Board Or Motherboard
616 Error Correction Type: Single-bit ECC
617 Maximum Capacity: 2304 GB
618 Error Information Handle: Not Provided
621 Handle 0x0033, DMI type 17, 84 bytes
624 Error Information Handle: Not Provided
631 Bank Locator: P1_Node0_Channel0_Dimm0
633 Type Detail: Synchronous
635 Manufacturer: SK Hynix
636 Serial Number: 93275FE2
637 Asset Tag: P2-DIMMA1_AssetTag (date:19/22)
638 Part Number: HMA82GR7CJR8N-WM
640 Configured Clock Speed: 2934 MT/s
641 Minimum Voltage: 1.2 V
642 Maximum Voltage: 1.2 V
643 Configured Voltage: 1.2 V
645 Handle 0x0034, DMI type 17, 84 bytes
648 Error Information Handle: Not Provided
651 Size: No Module Installed
655 Bank Locator: P1_Node0_Channel0_Dimm1
659 Manufacturer: NO DIMM
660 Serial Number: NO DIMM
664 Configured Clock Speed: Unknown
665 Minimum Voltage: 1.2 V
666 Maximum Voltage: 1.2 V
667 Configured Voltage: 1.2 V
669 Handle 0x0035, DMI type 17, 84 bytes
672 Error Information Handle: Not Provided
679 Bank Locator: P1_Node0_Channel1_Dimm0
681 Type Detail: Synchronous
683 Manufacturer: SK Hynix
684 Serial Number: 93276001
685 Asset Tag: P2-DIMMB1_AssetTag (date:19/22)
686 Part Number: HMA82GR7CJR8N-WM
688 Configured Clock Speed: 2934 MT/s
689 Minimum Voltage: 1.2 V
690 Maximum Voltage: 1.2 V
691 Configured Voltage: 1.2 V
693 Handle 0x0037, DMI type 17, 84 bytes
696 Error Information Handle: Not Provided
703 Bank Locator: P1_Node0_Channel2_Dimm0
705 Type Detail: Synchronous
707 Manufacturer: SK Hynix
708 Serial Number: 93276005
709 Asset Tag: P2-DIMMC1_AssetTag (date:19/22)
710 Part Number: HMA82GR7CJR8N-WM
712 Configured Clock Speed: 2934 MT/s
713 Minimum Voltage: 1.2 V
714 Maximum Voltage: 1.2 V
715 Configured Voltage: 1.2 V
717 Handle 0x0039, DMI type 16, 23 bytes
718 Physical Memory Array
719 Location: System Board Or Motherboard
721 Error Correction Type: Single-bit ECC
722 Maximum Capacity: 2304 GB
723 Error Information Handle: Not Provided
726 Handle 0x003B, DMI type 17, 84 bytes
729 Error Information Handle: Not Provided
736 Bank Locator: P1_Node1_Channel0_Dimm0
738 Type Detail: Synchronous
740 Manufacturer: SK Hynix
741 Serial Number: 93275F44
742 Asset Tag: P2-DIMMD1_AssetTag (date:19/22)
743 Part Number: HMA82GR7CJR8N-WM
745 Configured Clock Speed: 2934 MT/s
746 Minimum Voltage: 1.2 V
747 Maximum Voltage: 1.2 V
748 Configured Voltage: 1.2 V
750 Handle 0x003C, DMI type 17, 84 bytes
753 Error Information Handle: Not Provided
756 Size: No Module Installed
760 Bank Locator: P1_Node1_Channel0_Dimm1
764 Manufacturer: NO DIMM
765 Serial Number: NO DIMM
769 Configured Clock Speed: Unknown
770 Minimum Voltage: 1.2 V
771 Maximum Voltage: 1.2 V
772 Configured Voltage: 1.2 V
774 Handle 0x003D, DMI type 17, 84 bytes
777 Error Information Handle: Not Provided
784 Bank Locator: P1_Node1_Channel1_Dimm0
786 Type Detail: Synchronous
788 Manufacturer: SK Hynix
789 Serial Number: 93275FDF
790 Asset Tag: P2-DIMME1_AssetTag (date:19/22)
791 Part Number: HMA82GR7CJR8N-WM
793 Configured Clock Speed: 2934 MT/s
794 Minimum Voltage: 1.2 V
795 Maximum Voltage: 1.2 V
796 Configured Voltage: 1.2 V
798 Handle 0x003F, DMI type 17, 84 bytes
801 Error Information Handle: Not Provided
808 Bank Locator: P1_Node1_Channel2_Dimm0
810 Type Detail: Synchronous
812 Manufacturer: SK Hynix
813 Serial Number: 93275FDD
814 Asset Tag: P2-DIMMF1_AssetTag (date:19/22)
815 Part Number: HMA82GR7CJR8N-WM
817 Configured Clock Speed: 2934 MT/s
818 Minimum Voltage: 1.2 V
819 Maximum Voltage: 1.2 V
820 Configured Voltage: 1.2 V
823 ## Xeon CLX Server BIOS Configuration - TG
828 | Quiet Boot [Enabled] |Boot option |
830 | Option ROM Messages [Force BIOS] | |
831 | Bootup NumLock State [On] | |
832 | Wait For "F1" If Error [Enabled] | |
833 | INT19 Trap Response [Immediate] | |
834 | Re-try Boot [Disabled] | |
835 | Install Windows 7 USB support [Disabled] | |
836 | Port 61h Bit-4 Emulation [Disabled] | |
838 | Power Configuration | |
839 | Watch Dog Function [Disabled] | |
840 | Restore on AC Power Loss [Last State] | |
841 | Power Button Function [Instant Off] | |
844 ### CPU Configuration
847 | Processor Configuration ^|Enables Hyper Threading |
848 | -------------------------------------------------- *|(Software Method to |
849 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
850 | Processor Socket CPU1 | CPU2 *|Processor threads. |
851 | Processor ID 00050657* | 00050657 *| |
852 | Processor Frequency 2.700GHz | 2.700GHz *| |
853 | Processor Max Ratio 1BH | 1BH *| |
854 | Processor Min Ratio 0AH | 0AH *| |
855 | Microcode Revision 0500002C | 0500002C *| |
856 | L1 Cache RAM 64KB | 64KB *| |
857 | L2 Cache RAM 1024KB | 1024KB *| |
858 | L3 Cache RAM 39424KB | 39424KB *| |
859 | Processor 0 Version *| |
860 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
861 | Processor 1 Version *| |
862 | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
863 | *|-----------------------------|
864 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
865 | Cores Enabled 0 *|^v: Select Item |
866 | Monitor/Mwait [Auto] *|Enter: Select |
867 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
868 | Intel Virtualization Technology [Enable] +|F1: General Help |
869 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
870 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
871 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
872 | DCU Streamer Prefetcher [Enable] | |
873 | DCU IP Prefetcher [Enable] | |
874 | LLC Prefetch [Disable] | |
875 | Extended APIC [Disable] | |
876 | AES-NI [Enable] | |
877 |> Advanced Power Management Configuration | |
880 #### Advanced Power Management Configuration
883 | Advanced Power Management Configuration |Switch CPU Power Management |
884 | -------------------------------------------------- |profile |
885 | Power Technology [Custom] | |
886 | Power Performance Tuning [BIOS Controls EPB] | |
887 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
888 |> CPU P State Control | |
889 |> Hardware PM State Control | |
890 |> CPU C State Control | |
891 |> Package C State Control | |
892 |> CPU T State Control | |
895 ##### CPU P State Control
898 | CPU P State Control |EIST allows the processor |
899 | |to dynamically adjust |
900 | SpeedStep (P-States) [Disable] |frequency and voltage based |
901 | EIST PSD Function [HW_ALL] |on power versus performance |
906 ##### Hardware PM State Control
909 | Hardware PM State Control |If set to Disable, hardware ^|
910 | |will choose a P-state *|
911 | Hardware P-States [Disable] |setting for the system *|
912 | |based on an OS request. *|
913 | |If set to Native Mode, *|
914 | |hardware will choose a *|
915 | |P-state setting based on OS *|
917 | |If set to Native Mode with *|
918 | |No Legacy Support, hardware *|
919 | |will choose a P-state *|
920 | |setting independently *|
921 | |without OS guidance. +|
922 | |If set to Out of Band Mode, +|
923 | |hardware autonomously v|
926 ##### CPU C State Control
929 | CPU C State Control |Select Enable to support |
930 | |Autonomous Core C-State |
931 | Autonomous Core C-State [Disable] |control which will allow |
932 | CPU C6 report [Disable] |the processor core to |
933 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
934 | |automatically and |
938 ##### Package C State Control
941 | Package C State Control |Limit the lowest package |
942 | |level C-State to |
943 | Package C State [C0/C1 state] |processors. Lower package |
944 | |C-State lower processor |
945 | |power consumption upon idle. |
948 ##### CPU T State Control
951 | CPU T State Control |Enable/Disable CPU |
952 | |throttling by OS. |
953 | Software Controlled T-States [Disable] |Throttling reduces power |
957 #### Chipset Configuration
960 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
961 | system to malfunction. | |
969 |> UPI Configuration |Displays and provides |
970 |> Memory Configuration |option to change the UPI |
971 |> IIO Configuration |Settings |
974 ##### UPI Configuration
977 | UPI Configuration |Use this feature to select |
978 | -------------------------------------------------- |the degrading precedence |
979 | Number of CPU 2 |option for Ultra Path |
980 | Number of Active UPI Link 3 |Interconnect connections. |
981 | Current UPI Link Speed Fast |Select Topology Precedent |
982 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
983 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
984 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
985 | 00000000FFFFFFFF |Precedent to degrade UPI |
986 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
987 | Degrade Precedence [Topology Precedence] |are in conflict. |
988 | Link L0p Enable [Disable] | |
989 | Link L1 Enable [Disable] | |
990 | IO Directory Cache (IODC) [Auto] | |
992 | XPT Prefetch [Disable] | |
993 | KTI Prefetch [Enable] |-----------------------------|
994 | Local/Remote Threshold [Auto] |><: Select Screen |
995 | Stale AtoS [Auto] |^v: Select Item |
996 | LLC Dead Line Alloc [Enable] |Enter: Select |
997 | Isoc Mode [Auto] |+/-: Change Opt. |
1000 ##### Memory Configuration
1003 | |Select POR to enforce POR |
1004 | -------------------------------------------------- |restrictions for DDR4 |
1005 | Integrated Memory Controller (iMC) |frequency and voltage |
1006 | -------------------------------------------------- |programming |
1008 | Enforce POR [POR] | |
1009 | PPR Type [Hard PPR] | |
1010 | Enhanced PPR [Disable] | |
1011 | Operation Mode [Test and Repair] | |
1012 | Memory Frequency [2933] | |
1013 | Data Scrambling for DDR4 [Auto] | |
1014 | tCCD_L Relaxation [Auto] | |
1015 | tRWSR Relaxation [Disable] | |
1016 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
1017 | 2x Refresh [Auto] | |
1018 | Page Policy [Auto] | |
1019 | IMC Interleaving [2-way Interleave] |-----------------------------|
1020 |> Memory Topology |><: Select Screen |
1021 |> Memory RAS Configuration |^v: Select Item |
1024 ##### IIO Configuration
1027 | IIO Configuration |Expose IIO DFX devices and |
1028 | -------------------------------------------------- |other CPU devices like PMON |
1030 | EV DFX Features [Disable] | |
1031 |> CPU1 Configuration | |
1032 |> CPU2 Configuration | |
1033 |> IOAT Configuration | |
1034 |> Intel. VT for Directed I/O (VT-d) | |
1035 |> Intel. VMD technology | |
1037 | IIO-PCIE Express Global Options | |
1038 | ======================================== | |
1039 | PCI-E Completion Timeout Disable [No] | |
1042 ##### CPU1 Configuration
1045 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1046 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1047 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1048 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1049 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1050 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1053 ##### CPU2 Configuration
1056 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1057 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1058 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1059 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1060 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1061 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1067 | |Enables Legacy USB support. |
1068 | USB Module Version 21 |AUTO option disables legacy |
1069 | |support if no USB devices |
1070 | USB Devices: |are connected. DISABLE |
1071 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1072 | |devices available only for |
1073 | Legacy USB Support [Enabled] |EFI applications. |
1074 | XHCI Hand-off [Enabled] | |
1075 | Port 60/64 Emulation [Enabled] | |
1076 | PCIe PLL SSC [Disable] | |
1077 | Real USB Wake Up [Enabled] | |
1078 | Front USB Wake Up [Enabled] | |
1081 | Azalia PME Enable [Disabled] | |
1084 ### PCIe/PCI/PnP Configuration
1087 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1088 | *|capable Devices to be |
1089 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1090 | Above 4G Decoding [Enabled] *|Space (Only if System |
1091 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1092 | ARI Support [Enabled] *|Decoding). |
1093 | MMIO High Base [56T] *| |
1094 | MMIO High Granularity Size [256G] *| |
1095 | Maximum Read Request [Auto] *| |
1096 | MMCFG Base [2G] *| |
1097 | NVMe Firmware Source [Vendor Defined *| |
1099 | VGA Priority [Onboard] *| |
1100 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1101 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1102 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1103 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1104 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1105 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1106 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1107 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1108 | Bus Master Enable [Enabled] +|F1: General Help |
1109 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1110 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1111 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1112 |> Network Stack Configuration | |
1118 | ACPI Settings |Enable or Disable Non |
1119 | |uniform Memory Access |
1120 | NUMA [Enabled] |(NUMA). |
1121 | WHEA Support [Enabled] | |
1122 | High Precision Event Timer [Enabled] | |
1125 ## Xeon CLX Server BIOS Configuration - DUT
1130 | Quiet Boot [Enabled] |Boot option |
1132 | Option ROM Messages [Force BIOS] | |
1133 | Bootup NumLock State [On] | |
1134 | Wait For "F1" If Error [Enabled] | |
1135 | INT19 Trap Response [Immediate] | |
1136 | Re-try Boot [Disabled] | |
1137 | Install Windows 7 USB support [Disabled] | |
1138 | Port 61h Bit-4 Emulation [Disabled] | |
1140 | Power Configuration | |
1141 | Watch Dog Function [Disabled] | |
1142 | Restore on AC Power Loss [Last State] | |
1143 | Power Button Function [Instant Off] | |
1146 ### CPU Configuration
1149 |--------------------------------------------------------------------+-----------------------------\
1150 | Processor Configuration ^|Enables Hyper Threading |
1151 | -------------------------------------------------- *|(Software Method to |
1152 | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
1153 | Processor Socket CPU1 | CPU2 *|Processor threads. |
1154 | Processor ID 00050657* | 00050657 *| |
1155 | Processor Frequency 2.300GHz | 2.300GHz *| |
1156 | Processor Max Ratio 17H | 17H *| |
1157 | Processor Min Ratio 0AH | 0AH *| |
1158 | Microcode Revision 0500002C | 0500002C *| |
1159 | L1 Cache RAM 64KB | 64KB *| |
1160 | L2 Cache RAM 1024KB | 1024KB *| |
1161 | L3 Cache RAM 36608KB | 36608KB *| |
1162 | Processor 0 Version *| |
1163 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1164 | Processor 1 Version *| |
1165 | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
1166 | *|-----------------------------|
1167 | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
1168 | Cores Enabled 0 *|^v: Select Item |
1169 | Monitor/Mwait [Auto] *|Enter: Select |
1170 | Execute Disable Bit [Enable] +|+/-: Change Opt. |
1171 | Intel Virtualization Technology [Enable] +|F1: General Help |
1172 | PPIN Control [Unlock/Enable] +|F2: Previous Values |
1173 | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
1174 | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
1175 | DCU Streamer Prefetcher [Enable] | |
1176 | DCU IP Prefetcher [Enable] | |
1177 | LLC Prefetch [Disable] | |
1178 | Extended APIC [Disable] | |
1179 | AES-NI [Enable] | |
1180 |> Advanced Power Management Configuration | |
1183 #### Advanced Power Management Configuration
1186 | Advanced Power Management Configuration |Switch CPU Power Management |
1187 | -------------------------------------------------- |profile |
1188 | Power Technology [Custom] | |
1189 | Power Performance Tuning [BIOS Controls EPB] | |
1190 | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
1191 |> CPU P State Control | |
1192 |> Hardware PM State Control | |
1193 |> CPU C State Control | |
1194 |> Package C State Control | |
1195 |> CPU T State Control | |
1198 ##### CPU P State Control
1201 | CPU P State Control |EIST allows the processor |
1202 | |to dynamically adjust |
1203 | SpeedStep (P-States) [Disable] |frequency and voltage based |
1204 | Activate PBF [Disable] |on power versus performance |
1205 | Configure PBF [Enable] |needs. |
1206 | EIST PSD Function [HW_ALL] | |
1209 ##### Hardware PM State Control
1212 | Hardware PM State Control |If set to Disable, hardware ^|
1213 | |will choose a P-state *|
1214 | Hardware P-States [Disable] |setting for the system *|
1215 | |based on an OS request. *|
1216 | |If set to Native Mode, *|
1217 | |hardware will choose a *|
1218 | |P-state setting based on OS *|
1220 | |If set to Native Mode with *|
1221 | |No Legacy Support, hardware *|
1222 | |will choose a P-state *|
1223 | |setting independently *|
1224 | |without OS guidance. +|
1225 | |If set to Out of Band Mode, +|
1226 | |hardware autonomously v|
1229 ##### CPU C State Control
1232 | CPU C State Control |Select Enable to support |
1233 | |Autonomous Core C-State |
1234 | Autonomous Core C-State [Disable] |control which will allow |
1235 | CPU C6 report [Disable] |the processor core to |
1236 | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
1237 | |automatically and |
1241 ##### Package C State Control
1244 | Package C State Control |Limit the lowest package |
1245 | |level C-State to |
1246 | Package C State [C0/C1 state] |processors. Lower package |
1247 | |C-State lower processor |
1248 | |power consumption upon idle. |
1251 ##### CPU T State Control
1254 | CPU T State Control |Enable/Disable CPU |
1255 | |throttling by OS. |
1256 | Software Controlled T-States [Disable] |Throttling reduces power |
1260 #### Chipset Configuration
1263 | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
1264 | system to malfunction. | |
1272 |> UPI Configuration |Displays and provides |
1273 |> Memory Configuration |option to change the UPI |
1274 |> IIO Configuration |Settings |
1277 ##### UPI Configuration
1280 | UPI Configuration |Use this feature to select |
1281 | -------------------------------------------------- |the degrading precedence |
1282 | Number of CPU 2 |option for Ultra Path |
1283 | Number of Active UPI Link 3 |Interconnect connections. |
1284 | Current UPI Link Speed Fast |Select Topology Precedent |
1285 | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
1286 | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
1287 | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
1288 | 00000000FFFFFFFF |Precedent to degrade UPI |
1289 | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
1290 | Degrade Precedence [Topology Precedence] |are in conflict. |
1291 | Link L0p Enable [Disable] | |
1292 | Link L1 Enable [Disable] | |
1293 | IO Directory Cache (IODC) [Auto] | |
1295 | XPT Prefetch [Disable] | |
1296 | KTI Prefetch [Enable] |-----------------------------|
1297 | Local/Remote Threshold [Auto] |><: Select Screen |
1298 | Stale AtoS [Auto] |^v: Select Item |
1299 | LLC Dead Line Alloc [Enable] |Enter: Select |
1300 | Isoc Mode [Auto] |+/-: Change Opt. |
1303 ##### Memory Configuration
1306 | |Select POR to enforce POR |
1307 | -------------------------------------------------- |restrictions for DDR4 |
1308 | Integrated Memory Controller (iMC) |frequency and voltage |
1309 | -------------------------------------------------- |programming |
1311 | Enforce POR [POR] | |
1312 | PPR Type [Hard PPR] | |
1313 | Enhanced PPR [Disable] | |
1314 | Operation Mode [Test and Repair] | |
1315 | Memory Frequency [2933] | |
1316 | Data Scrambling for DDR4 [Auto] | |
1317 | tCCD_L Relaxation [Auto] | |
1318 | tRWSR Relaxation [Disable] | |
1319 | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
1320 | 2x Refresh [Auto] | |
1321 | Page Policy [Auto] | |
1322 | IMC Interleaving [2-way Interleave] |-----------------------------|
1323 |> Memory Topology |><: Select Screen |
1324 |> Memory RAS Configuration |^v: Select Item |
1327 ##### IIO Configuration
1330 | IIO Configuration |Expose IIO DFX devices and |
1331 | -------------------------------------------------- |other CPU devices like PMON |
1333 | EV DFX Features [Disable] | |
1334 |> CPU1 Configuration | |
1335 |> CPU2 Configuration | |
1336 |> IOAT Configuration | |
1337 |> Intel. VT for Directed I/O (VT-d) | |
1338 |> Intel. VMD technology | |
1340 | IIO-PCIE Express Global Options | |
1341 | ======================================== | |
1342 | PCI-E Completion Timeout Disable [No] | |
1345 ##### CPU1 Configuration
1348 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1349 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1350 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1351 |> CPU1 SLOT2 PCI-E 3.0 X16 | |
1352 |> CPU1 SLOT4 PCI-E 3.0 X16 | |
1353 |> CPU1 SLOT9 PCI-E 3.0 X16 | |
1356 ##### CPU2 Configuration
1359 | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
1360 | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
1361 | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
1362 |> CPU2 SLOT6 PCI-E 3.0 X16 | |
1363 |> CPU2 SLOT8 PCI-E 3.0 X16 | |
1364 |> CPU2 SLOT10 PCI-E 3.0 X16 | |
1370 | |Enables Legacy USB support. |
1371 | USB Module Version 21 |AUTO option disables legacy |
1372 | |support if no USB devices |
1373 | USB Devices: |are connected. DISABLE |
1374 | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
1375 | |devices available only for |
1376 | Legacy USB Support [Enabled] |EFI applications. |
1377 | XHCI Hand-off [Enabled] | |
1378 | Port 60/64 Emulation [Enabled] | |
1379 | PCIe PLL SSC [Disable] | |
1380 | Real USB Wake Up [Enabled] | |
1381 | Front USB Wake Up [Enabled] | |
1384 | Azalia PME Enable [Disabled] | |
1387 ### PCIe/PCI/PnP Configuration
1390 | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
1391 | *|capable Devices to be |
1392 | PCI Devices Common Settings: *|Decoded in Above 4G Address |
1393 | Above 4G Decoding [Enabled] *|Space (Only if System |
1394 | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
1395 | ARI Support [Enabled] *|Decoding). |
1396 | MMIO High Base [56T] *| |
1397 | MMIO High Granularity Size [256G] *| |
1398 | Maximum Read Request [Auto] *| |
1399 | MMCFG Base [2G] *| |
1400 | NVMe Firmware Source [Vendor Defined *| |
1402 | VGA Priority [Onboard] *| |
1403 | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
1404 | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
1405 | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
1406 | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
1407 | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
1408 | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
1409 | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
1410 | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
1411 | Bus Master Enable [Enabled] +|F1: General Help |
1412 | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
1413 | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
1414 | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
1415 |> Network Stack Configuration | |
1421 | ACPI Settings |Enable or Disable Non |
1422 | |uniform Memory Access |
1423 | NUMA [Enabled] |(NUMA). |
1424 | WHEA Support [Enabled] | |
1425 | High Precision Event Timer [Enabled] | |
1429 ## Xeon Clx Server Firmware Inventory
1432 Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core E810 Firmware. ice.
1433 s33-t27-sut1. 10.30.55.18. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1434 s34-t27-tg1. 10.30.55.19. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1435 s35-t28-sut1. 10.30.55.20. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1436 s36-t28-tg1. 10.30.55.21. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.
1437 s37-t29-sut1. 10.30.55.22. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7.
1438 s38-t29-tg1. 10.30.55.23. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A.