4 Documentation for tags used to select and identify test cases.
10 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
12 3 nodes connected in a circular topology with two links interconnecting
15 .. topic:: 3_NODE_SINGLE_LINK_TOPO
17 3 nodes connected in a circular topology with at least one link
18 interconnecting devices.
26 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
27 and csit-vpp-verify jobs (i.e. CSIT patch).
29 .. topic:: SKIP_VPP_PATCH
31 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
39 DUTs and TGs are running on bare metal.
43 DUTs and TGs are running in virtual environment.
47 DUTs with VPP and capable of running Virtual Machine.
53 .. topic:: NIC_Intel-X520-DA2
57 .. topic:: NIC_Intel-XL710
61 .. topic:: NIC_Intel-X710
65 .. topic:: NIC_Cisco-VIC-1227
69 .. topic:: NIC_Cisco-VIC-1385
79 2x10,000 entries in single fib table
83 2x100,000 entries in single fib table
87 2x1,000,000 entries in single fib table
91 IPSec in tunnel mode - 1000 tunnels.
93 .. topic:: SRC_USER_10
95 Traffic flow with 10 unique IPs (users) in one direction.
97 .. topic:: SRC_USER_100
99 Traffic flow with 100 unique IPs (users) in one direction.
101 .. topic:: SRC_USER_1000
103 Traffic flow with 1000 unique IPs (users) in one direction.
105 .. topic:: SRC_USER_2000
107 Traffic flow with 2000 unique IPs (users) in one direction.
109 .. topic:: SRC_USER_4000
111 Traffic flow with 4000 unique IPs (users) in one direction.
114 Tags marking functional vs. performance of tests
115 ------------------------------------------------
119 All functional test cases.
123 All performance test cases.
126 Performance testing tags
127 ------------------------
131 Partial Drop Rate evaluation of single run result, with non-zero packet
132 loss tolerance (LT) expressed in percentage of packets transmitted.
136 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
137 set to zero lost packets.
141 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
142 Non Drop Rate) with zero packet loss tolerance.
144 .. topic:: NDRPDRDISC
146 Find performance of DUT based on RFC2544 with linear / binary / combined
147 search. (Previous LONG tests.)
149 Ethernet frame size tags for performance tests
150 ----------------------------------------------
154 64B frames used for test.
158 78B frames used for test.
162 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
166 1460B frames used for test.
170 1480B frames used for test.
174 1514B frames used for test.
178 1518B frames used for test.
182 9000B frames used for test.
189 Baseline test cases, no encapsulation, no feature(s) configured in tests.
193 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
198 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
203 L2XC baseline test cases, no encapsulation, no feature(s) configured in
208 L2BD baseline test cases, no encapsulation, no feature(s) configured in
217 Test cases where encapsulation is used. Use also encapsulation tag(s).
221 At least one feature is configured in test cases. Use also feature tag(s).
227 .. topic:: L2BDMACSTAT
229 VPP L2 bridge-domain, L2 MAC static.
231 .. topic:: L2BDMACLRN
233 VPP L2 bridge-domain, L2 MAC learning.
237 VPP L2 point-to-point cross-connect.
241 VPP IPv4 routed forwarding.
245 VPP IPv6 routed forwarding.
259 .. topic:: MPLSUNRLAY
273 IPv4 overlay (IPv4 payload).
277 IPv6 overlay (IPv6 payload).
285 All test cases with base Ethernet (no encapsulation).
289 All test cases with dot1q.
293 All test cases with dot1ad.
297 All test cases with LISP.
301 All test cases with LISP-GPE.
305 All test cases with Vxlan.
309 All test cases with VXLAN-GPE.
313 All test cases with GRE.
317 All test cases with IPSEC.
325 All test cases which use physical interface(s).
329 All test cases which uses VHOST.
333 All test cases which uses TUN and TAP.
337 All test cases which uses AFPKT.
341 All test cases which uses Netmap.
357 SNAT configured and tested.
373 IPSec in transport mode.
377 IPSec in tunnel mode.
385 All test cases which use at least one virtual machine.
389 All test cases which use Linux container.
393 All test cases with specific APP use.
401 All test cases using single poll mode thread.
405 All test cases using more then one poll mode driver thread.
409 All test cases with packet processing on single socket.
413 All test cases with packet processing on two sockets.
417 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
421 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
425 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
426 interface. Main thread pinned to core 0.
430 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
431 interface. Main thread pinned to core 0.
435 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
436 interface. Main thread pinned to core 0.
440 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
441 interface. Main thread pinned to core 0.
445 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
446 interface. Main thread pinned to core 0.
454 Honeycomb functional test cases.
456 .. topic:: HC_PERSIST
458 Honeycomb persistence test cases.
460 .. topic:: HC_REST_ONLY
462 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
463 using ODL client for Restfconf -> Netconf translation.