4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT tags and their
12 .. topic:: 2_NODE_DOUBLE_LINK_TOPO
14 2 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 2_NODE_SINGLE_LINK_TOPO
19 2 nodes connected in a circular topology with at least one link
20 interconnecting devices.
22 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
24 3 nodes connected in a circular topology with two links interconnecting
27 .. topic:: 3_NODE_SINGLE_LINK_TOPO
29 3 nodes connected in a circular topology with at least one link
30 interconnecting devices.
37 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
38 and csit-vpp-verify jobs (i.e. CSIT patch).
40 .. topic:: SKIP_VPP_PATCH
42 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
49 DUTs and TGs are running on bare metal.
53 DUTs and TGs are running in virtual environment.
57 DUTs with VPP and capable of running Virtual Machine.
62 .. topic:: NIC_Intel-X520-DA2
66 .. topic:: NIC_Intel-XL710
70 .. topic:: NIC_Intel-X710
74 .. topic:: NIC_Intel-XXV710
78 .. topic:: NIC_Cisco-VIC-1227
82 .. topic:: NIC_Cisco-VIC-1385
91 2x10,000 entries in single fib table
95 2x100,000 entries in single fib table
99 2x1,000,000 entries in single fib table
103 Test with 1 L2 bridge domain.
107 Test with 10 L2 bridge domains.
111 Test with 100 L2 bridge domains.
115 Test with 1000 L2 bridge domains.
119 Test with 1 VLAN sub-interface.
123 Test with 10 VLAN sub-interfaces.
127 Test with 100 VLAN sub-interfaces.
131 Test with 1000 VLAN sub-interfaces.
135 Test with 1 VXLAN tunnel.
139 Test with 10 VXLAN tunnels.
143 Test with 100 VXLAN tunnels.
147 Test with 1000 VXLAN tunnels.
151 IPSec in tunnel mode - 1000 tunnels.
153 .. topic:: SRC_USER_1
155 Traffic flow with 1 unique IP (users) in one direction.
157 .. topic:: SRC_USER_10
159 Traffic flow with 10 unique IPs (users) in one direction.
161 .. topic:: SRC_USER_100
163 Traffic flow with 100 unique IPs (users) in one direction.
165 .. topic:: SRC_USER_1000
167 Traffic flow with 1000 unique IPs (users) in one direction.
169 .. topic:: SRC_USER_2000
171 Traffic flow with 2000 unique IPs (users) in one direction.
173 .. topic:: SRC_USER_4000
175 Traffic flow with 4000 unique IPs (users) in one direction.
179 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
184 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
187 .. topic:: 100k_FLOWS
189 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
197 All functional test cases.
201 All performance test cases.
203 Performance Type Tags
204 ---------------------
208 Single test finding both No Drop Rate and Partial Drop Rate simultaneously.
209 The search is done by optimized algorithm which performs
210 multiple trial runs at different durations and transmit rates.
211 The results come from the final trials, which have duration of 30 seconds.
215 Performance tests where TG sends the traffic at maximum rate (line rate)
216 and reports total sent/received packets over trial duration.
217 The result is an average of 10 trials of 1 second duration.
221 Performance tests using PLRsearch to find the critical load.
223 Ethernet Frame Size Tags
224 ------------------------
228 64B frames used for test.
232 78B frames used for test.
236 114B frames used for test.
240 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
244 1460B frames used for test.
248 1480B frames used for test.
252 1514B frames used for test.
256 1518B frames used for test.
260 9000B frames used for test.
267 Baseline test cases, no encapsulation, no feature(s) configured in tests.
271 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
276 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
281 L2XC baseline test cases, no encapsulation, no feature(s) configured in
286 L2BD baseline test cases, no encapsulation, no feature(s) configured in
291 L2PATCH baseline test cases, no encapsulation, no feature(s) configured in
300 Test cases where encapsulation is used. Use also encapsulation tag(s).
304 At least one feature is configured in test cases. Use also feature tag(s).
308 Functional test cases for TLDK.
312 Functional test cases for DMM.
320 Performance tests which measure connections per second using http requests.
324 Performance tests which measure requests per second using http requests.
328 Tests which use HTTP.
330 .. topic:: NF_DENSITY
332 Performance tests that measure throughput of multiple VNF and CNF
333 service topologies at different service densities.
335 NF Service Density Tags
336 -----------------------
340 NF service density tests with VNF or CNF service chain topology(ies).
344 NF service density tests with CNF service pipeline topology(ies).
346 .. topic:: NF_L3FWDIP4
348 NF service density tests with DPDK l3fwd IPv4 routing as NF workload.
352 NF service density tests with VPP IPv4 routing as NF workload.
356 Service density matrix locator {r}R{c}C, {r}Row denoting number of
357 service instances, {c}Column denoting number of NFs per service
358 instance. {r}=(1,2,4,6,8,10), {c}=(1,2,4,6,8,10).
363 .. topic:: L2BDMACSTAT
365 VPP L2 bridge-domain, L2 MAC static.
367 .. topic:: L2BDMACLRN
369 VPP L2 bridge-domain, L2 MAC learning.
373 VPP L2 point-to-point cross-connect.
377 VPP IPv4 routed forwarding.
381 VPP IPv6 routed forwarding.
394 .. topic:: MPLSUNRLAY
407 IPv4 overlay (IPv4 payload).
411 IPv6 overlay (IPv6 payload).
418 All test cases with dot1q.
422 All test cases with dot1ad.
429 All test cases with base Ethernet (no encapsulation).
433 All test cases with LISP.
437 All test cases with LISP-GPE.
441 All test cases with Vxlan.
445 All test cases with VXLAN-GPE.
449 All test cases with GRE.
453 All test cases with IPSEC.
457 All test cases with Segment routing over IPv6 dataplane.
461 All SRv6 test cases with single SID.
463 .. topic:: SRv6_2SID_DECAP
465 All SRv6 test cases with two SIDs and with decapsulation.
467 .. topic:: SRv6_2SID_NODECAP
469 All SRv6 test cases with two SIDs and without decapsulation.
476 All test cases which use physical interface(s).
480 All test cases which uses VHOST.
484 All test cases which uses VHOST with qemu queue size set to 256.
486 .. topic:: VHOST_1024
488 All test cases which uses VHOST with qemu queue size set to 1024.
492 All test cases which uses VM with optimised scheduler policy.
496 All test cases which uses TUN and TAP.
500 All test cases which uses AFPKT.
504 All test cases which uses Netmap.
508 All test cases which uses Memif.
510 .. topic:: SINGLE_MEMIF
512 All test cases which uses only single Memif connection per DUT. One DUT
513 instance is running in container having one physical interface exposed to
518 All test cases which uses link bonding (BondEthernet interface).
520 .. topic:: LBOND_DPDK
522 All test cases which uses DPDK link bonding.
526 All test cases which uses VPP link bonding.
528 .. topic:: LBOND_MODE_XOR
530 All test cases which uses link bonding with mode XOR.
532 .. topic:: LBOND_MODE_LACP
534 All test cases which uses link bonding with mode LACP.
536 .. topic:: LBOND_LB_L34
538 All test cases which uses link bonding with load-balance mode l34.
542 All test cases which uses one link for link bonding.
546 All test cases which uses two links for link bonding.
550 All test cases which uses Intel Adaptive Virtual Function (AVF) device
551 plugin for VPP. This plugins provides native device support for Intel AVF.
552 AVF is driver specification for current and future Intel Virtual Function
553 devices. In essence, today this driver can be used only with Intel
554 XL710 / X710 / XXV710 adapters.
569 NAT44 configured and tested.
573 NAT44 configured and tested.
577 ACL plugin configured and tested.
581 ACL plugin configured and tested on input path.
585 ACL plugin configured and tested on output path.
587 .. topic:: ACL_STATELESS
589 ACL plugin configured and tested in stateless mode (permit action).
591 .. topic:: ACL_STATEFUL
593 ACL plugin configured and tested in stateful mode (permit+reflect action).
597 ACL plugin configured and tested with 1 not-hitting ACE.
601 ACL plugin configured and tested with 10 not-hitting ACEs.
605 ACL plugin configured and tested with 50 not-hitting ACEs.
607 .. topic:: SRv6_PROXY
609 SRv6 endpoint to SR-unaware appliance via proxy.
611 .. topic:: SRv6_PROXY_STAT
613 SRv6 endpoint to SR-unaware appliance via static proxy.
615 .. topic:: SRv6_PROXY_DYN
617 SRv6 endpoint to SR-unaware appliance via dynamic proxy.
619 .. topic:: SRv6_PROXY_MASQ
621 SRv6 endpoint to SR-unaware appliance via masquerading proxy.
636 IPSec in transport mode.
640 IPSec in tunnel mode.
644 IPSec in interface mode.
648 IPSec using AES GCM algorithms.
652 IPSec using CBC SHA1 algorithms.
659 All test cases which use at least one virtual machine.
663 All test cases which use Linux container and LXC utils.
667 All test cases which use at least one Docker container.
671 All test cases which use Docker as container manager.
675 All test cases with specific APP use.
677 Container Orchestration Tags
678 ----------------------------
682 All test cases which use Kubernetes for orchestration.
684 .. topic:: SFC_CONTROLLER
686 All test cases which use ligato/sfc_controller for driving configuration
687 of vpp inside container.
691 All test cases which use Golang implementation of a control/management plane
696 VPP running in Docker container acting as VSWITCH.
700 1 VPP running in Docker container acting as VNF work load.
704 2 VPP running in 2 Docker containers acting as VNF work load.
708 4 VPP running in 4 Docker containers acting as VNF work load.
716 All test cases using single poll mode thread.
721 All test cases using more then one poll mode driver thread.
725 All test cases with packet processing on single socket.
729 All test cases with packet processing on two sockets.
733 1 worker thread pinned to 1 dedicated physical core; or if HyperThreading is
734 enabled, 2 worker threads each pinned to a separate logical core within 1
735 dedicated physical core. Main thread pinned to core 1.
739 2 worker threads pinned to 2 dedicated physical cores; or if HyperThreading
740 is enabled, 4 worker threads each pinned to a separate logical core within 2
741 dedicated physical cores. Main thread pinned to core 1.
745 4 worker threads pinned to 4 dedicated physical cores; or if HyperThreading
746 is enabled, 8 worker threads each pinned to a separate logical core within 4
747 dedicated physical cores. Main thread pinned to core 1.
752 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
753 interface. Main thread pinned to core 1.
758 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
759 interface. Main thread pinned to core 1.
764 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
765 interface. Main thread pinned to core 1.
770 2 worker threads each pinned to a separate logical core within 1 dedicated
771 physical core. 1 receive queue per interface. Main thread pinned to core 1.
776 4 worker threads each pinned to a separate logical core within 2 dedicated
777 physical cores. 2 receive queues per interface. Main thread pinned to core
783 8 worker threads each pinned to a separate logical core within 4 dedicated
784 physical cores. 4 receive queues per interface. Main thread pinned to core
792 Honeycomb functional test cases.
796 Honeycomb NSH test cases.
798 .. topic:: HC_PERSIST
800 Honeycomb persistence test cases.
802 .. topic:: HC_REST_ONLY
804 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
805 using ODL client for Restfconf -> Netconf translation.