4 Documentation for tags used to select and identify test cases.
10 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
12 3 nodes connected in a circular topology with two links interconnecting
15 .. topic:: 3_NODE_SINGLE_LINK_TOPO
17 3 nodes connected in a circular topology with at least one link
18 interconnecting devices.
25 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
26 and csit-vpp-verify jobs (i.e. CSIT patch).
34 DUTs and TGs are running on bare metal.
38 DUTs and TGs are running in virtual environment.
42 DUTs with VPP and capable of running Virtual Machine.
48 .. topic:: NIC_Intel-X520-DA2
52 .. topic:: NIC_Intel-XL710
56 .. topic:: NIC_Intel-X710
60 .. topic:: NIC_Cisco-VIC-1227
64 .. topic:: NIC_Cisco-VIC-1385
74 2x10,000 entries in single fib table
78 2x100,000 entries in single fib table
82 2x1,000,000 entries in single fib table
86 IPSec in tunnel mode - 1000 tunnels.
88 .. topic:: SRC_USER_10
90 Traffic flow with 10 unique IPs (users) in one direction.
92 .. topic:: SRC_USER_100
94 Traffic flow with 100 unique IPs (users) in one direction.
96 .. topic:: SRC_USER_1000
98 Traffic flow with 1000 unique IPs (users) in one direction.
100 .. topic:: SRC_USER_2000
102 Traffic flow with 2000 unique IPs (users) in one direction.
104 .. topic:: SRC_USER_4000
106 Traffic flow with 4000 unique IPs (users) in one direction.
109 Tags marking functional vs. performance of tests
110 ------------------------------------------------
114 All functional test cases.
118 All performance test cases.
121 Performance testing tags
122 ------------------------
126 Partial Drop Rate evaluation of single run result, with non-zero packet
127 loss tolerance (LT) expressed in percentage of packets transmitted.
131 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
132 set to zero lost packets.
136 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
137 Non Drop Rate) with zero packet loss tolerance.
139 .. topic:: NDRPDRDISC
141 Find performance of DUT based on RFC2544 with linear / binary / combined
142 search. (Previous LONG tests.)
144 Ethernet frame size tags for performance tests
145 ----------------------------------------------
149 64B frames used for test.
153 78B frames used for test.
157 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
161 1460B frames used for test.
165 1480B frames used for test.
169 1514B frames used for test.
173 1518B frames used for test.
177 9000B frames used for test.
184 Baseline test cases, no encapsulation, no feature(s) configured in tests.
188 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
193 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
198 L2XC baseline test cases, no encapsulation, no feature(s) configured in
203 L2BD baseline test cases, no encapsulation, no feature(s) configured in
212 Test cases where encapsulation is used. Use also encapsulation tag(s).
216 At least one feature is configured in test cases. Use also feature tag(s).
222 .. topic:: L2BDMACSTAT
224 VPP L2 bridge-domain, L2 MAC static.
226 .. topic:: L2BDMACLRN
228 VPP L2 bridge-domain, L2 MAC learning.
232 VPP L2 point-to-point cross-connect.
236 VPP IPv4 routed forwarding.
240 VPP IPv6 routed forwarding.
254 .. topic:: MPLSUNRLAY
268 IPv4 overlay (IPv4 payload).
272 IPv6 overlay (IPv6 payload).
280 All test cases with base Ethernet (no encapsulation).
284 All test cases with dot1q.
288 All test cases with dot1ad.
292 All test cases with LISP.
296 All test cases with LISP-GPE.
300 All test cases with Vxlan.
304 All test cases with VXLAN-GPE.
308 All test cases with GRE.
312 All test cases with IPSEC.
320 All test cases which use physical interface(s).
324 All test cases which uses VHOST.
328 All test cases which uses TUN and TAP.
332 All test cases which uses AFPKT.
336 All test cases which uses Netmap.
352 SNAT configured and tested.
368 IPSec in transport mode.
372 IPSec in tunnel mode.
380 All test cases which use at least one virtual machine.
384 All test cases which use Linux container.
388 All test cases with specific APP use.
396 All test cases using single poll mode thread.
400 All test cases using more then one poll mode driver thread.
404 All test cases with packet processing on single socket.
408 All test cases with packet processing on two sockets.
412 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
416 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
420 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
421 interface. Main thread pinned to core 0.
425 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
426 interface. Main thread pinned to core 0.
430 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
431 interface. Main thread pinned to core 0.
435 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
436 interface. Main thread pinned to core 0.
440 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
441 interface. Main thread pinned to core 0.