4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT TAGs and their
12 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
14 3 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 3_NODE_SINGLE_LINK_TOPO
19 3 nodes connected in a circular topology with at least one link
20 interconnecting devices.
27 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
28 and csit-vpp-verify jobs (i.e. CSIT patch).
30 .. topic:: SKIP_VPP_PATCH
32 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
39 DUTs and TGs are running on bare metal.
43 DUTs and TGs are running in virtual environment.
47 DUTs with VPP and capable of running Virtual Machine.
52 .. topic:: NIC_Intel-X520-DA2
56 .. topic:: NIC_Intel-XL710
60 .. topic:: NIC_Intel-X710
64 .. topic:: NIC_Cisco-VIC-1227
68 .. topic:: NIC_Cisco-VIC-1385
77 2x10,000 entries in single fib table
81 2x100,000 entries in single fib table
85 2x1,000,000 entries in single fib table
89 IPSec in tunnel mode - 1000 tunnels.
91 .. topic:: SRC_USER_10
93 Traffic flow with 10 unique IPs (users) in one direction.
95 .. topic:: SRC_USER_100
97 Traffic flow with 100 unique IPs (users) in one direction.
99 .. topic:: SRC_USER_1000
101 Traffic flow with 1000 unique IPs (users) in one direction.
103 .. topic:: SRC_USER_2000
105 Traffic flow with 2000 unique IPs (users) in one direction.
107 .. topic:: SRC_USER_4000
109 Traffic flow with 4000 unique IPs (users) in one direction.
113 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
118 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
121 .. topic:: 100k_FLOWS
123 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
126 Tags marking functional vs. performance of tests
127 ------------------------------------------------
131 All functional test cases.
135 All performance test cases.
137 Performance testing tags
138 ------------------------
142 Partial Drop Rate evaluation of single run result, with non-zero packet
143 loss tolerance (LT) expressed in percentage of packets transmitted.
147 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
148 set to zero lost packets.
152 Single test finding both No Drop Rate and Partial Drop Rate simultaneously.
153 The search is done by optimized algorithm which performs
154 multiple trial runs at different durations and transmit rates.
158 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
159 Non Drop Rate) with zero packet loss tolerance.
163 Performance tests where TG verifies DUTs' throughput at ref-PDR (reference
164 Partial Drop Rate) with 0.5% loss tolerance.
168 Performance tests where TG sends the traffic at maximum rate (line rate)
169 and reports total sent/received packets over performance trial duration.
171 .. topic:: NDRPDRDISC
173 Find performance of DUT based on :rfc:`2544` with linear / binary / combined
174 search. (Previous LONG tests.)
176 Ethernet frame size tags for performance tests
177 ----------------------------------------------
181 64B frames used for test.
185 78B frames used for test.
189 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
193 1460B frames used for test.
197 1480B frames used for test.
201 1514B frames used for test.
205 1518B frames used for test.
209 9000B frames used for test.
216 Baseline test cases, no encapsulation, no feature(s) configured in tests.
220 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
225 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
230 L2XC baseline test cases, no encapsulation, no feature(s) configured in
235 L2BD baseline test cases, no encapsulation, no feature(s) configured in
244 Test cases where encapsulation is used. Use also encapsulation tag(s).
248 At least one feature is configured in test cases. Use also feature tag(s).
252 Functional test cases for TLDK.
260 Performance tests which measure connections per second using http requests.
264 Performance tests which measure requests per second using http requests.
268 Tests which use HTTP.
273 .. topic:: L2BDMACSTAT
275 VPP L2 bridge-domain, L2 MAC static.
277 .. topic:: L2BDMACLRN
279 VPP L2 bridge-domain, L2 MAC learning.
283 VPP L2 point-to-point cross-connect.
287 VPP IPv4 routed forwarding.
291 VPP IPv6 routed forwarding.
304 .. topic:: MPLSUNRLAY
317 IPv4 overlay (IPv4 payload).
321 IPv6 overlay (IPv6 payload).
328 All test cases with dot1q.
332 All test cases with dot1ad.
339 All test cases with base Ethernet (no encapsulation).
343 All test cases with LISP.
347 All test cases with LISP-GPE.
351 All test cases with Vxlan.
355 All test cases with VXLAN-GPE.
359 All test cases with GRE.
363 All test cases with IPSEC.
367 All test cases with Segment routing over IPv6 dataplane.
374 All test cases which use physical interface(s).
378 All test cases which uses VHOST.
382 All test cases which uses VHOST with qemu queue size set to 256.
384 .. topic:: VHOST_1024
386 All test cases which uses VHOST with qemu queue size set to 1024.
390 All test cases which uses VM with optimised scheduler policy.
394 All test cases which uses TUN and TAP.
398 All test cases which uses AFPKT.
402 All test cases which uses Netmap.
406 All test cases which uses Memif.
421 NAT44 configured and tested.
425 NAT44 configured and tested.
429 ACL plugin configured and tested.
433 ACL plugin configured and tested on input path.
437 ACL plugin configured and tested on output path.
439 .. topic:: ACL_STATELESS
441 ACL plugin configured and tested in stateless mode (permit action).
443 .. topic:: ACL_STATEFUL
445 ACL plugin configured and tested in stateful mode (permit+reflect action).
449 ACL plugin configured and tested with 1 not-hitting ACE.
453 ACL plugin configured and tested with 10 not-hitting ACEs.
457 ACL plugin configured and tested with 50 not-hitting ACEs.
459 .. topic:: SRv6_PROXY
461 SRv6 endpoint to SR-unaware appliance via proxy.
463 .. topic:: SRv6_PROXY_STAT
465 SRv6 endpoint to SR-unaware appliance via static proxy.
467 .. topic:: SRv6_PROXY_DYN
469 SRv6 endpoint to SR-unaware appliance via dynamic proxy.
471 .. topic:: SRv6_PROXY_MASQ
473 SRv6 endpoint to SR-unaware appliance via masquerading proxy.
488 IPSec in transport mode.
492 IPSec in tunnel mode.
499 All test cases which use at least one virtual machine.
503 All test cases which use Linux container and LXC utils.
507 All test cases which use Docker as container manager.
511 All test cases with specific APP use.
513 Container orchestration tags
514 ----------------------------
518 All test cases which use Kubernetes for orchestration.
520 .. topic:: SFC_CONTROLLER
522 All test cases which use ligato/sfc_controller for driving configuration
523 of vpp inside container.
527 All test cases which use Golang implementation of a control/management plane
532 VPP running in Docker container acting as VSWITCH.
536 1 VPP running in Docker container acting as VNF work load.
540 2 VPP running in 2 Docker containers acting as VNF work load.
544 4 VPP running in 4 Docker containers acting as VNF work load.
551 All test cases using single poll mode thread.
555 All test cases using more then one poll mode driver thread.
559 All test cases with packet processing on single socket.
563 All test cases with packet processing on two sockets.
567 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
571 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
575 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
576 interface. Main thread pinned to core 0.
580 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
581 interface. Main thread pinned to core 0.
585 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
586 interface. Main thread pinned to core 0.
590 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
591 interface. Main thread pinned to core 0.
595 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
596 interface. Main thread pinned to core 0.
603 Honeycomb functional test cases.
607 Honeycomb NSH test cases.
609 .. topic:: HC_PERSIST
611 Honeycomb persistence test cases.
613 .. topic:: HC_REST_ONLY
615 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
616 using ODL client for Restfconf -> Netconf translation.