4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT TAGs and their
12 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
14 3 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 3_NODE_SINGLE_LINK_TOPO
19 3 nodes connected in a circular topology with at least one link
20 interconnecting devices.
27 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
28 and csit-vpp-verify jobs (i.e. CSIT patch).
30 .. topic:: SKIP_VPP_PATCH
32 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
39 DUTs and TGs are running on bare metal.
43 DUTs and TGs are running in virtual environment.
47 DUTs with VPP and capable of running Virtual Machine.
52 .. topic:: NIC_Intel-X520-DA2
56 .. topic:: NIC_Intel-XL710
60 .. topic:: NIC_Intel-X710
64 .. topic:: NIC_Cisco-VIC-1227
68 .. topic:: NIC_Cisco-VIC-1385
77 2x10,000 entries in single fib table
81 2x100,000 entries in single fib table
85 2x1,000,000 entries in single fib table
89 IPSec in tunnel mode - 1000 tunnels.
91 .. topic:: SRC_USER_10
93 Traffic flow with 10 unique IPs (users) in one direction.
95 .. topic:: SRC_USER_100
97 Traffic flow with 100 unique IPs (users) in one direction.
99 .. topic:: SRC_USER_1000
101 Traffic flow with 1000 unique IPs (users) in one direction.
103 .. topic:: SRC_USER_2000
105 Traffic flow with 2000 unique IPs (users) in one direction.
107 .. topic:: SRC_USER_4000
109 Traffic flow with 4000 unique IPs (users) in one direction.
113 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
118 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
121 .. topic:: 100k_FLOWS
123 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
126 Tags marking functional vs. performance of tests
127 ------------------------------------------------
131 All functional test cases.
135 All performance test cases.
137 Performance testing tags
138 ------------------------
142 Partial Drop Rate evaluation of single run result, with non-zero packet
143 loss tolerance (LT) expressed in percentage of packets transmitted.
147 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
148 set to zero lost packets.
152 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
153 Non Drop Rate) with zero packet loss tolerance.
155 .. topic:: NDRPDRDISC
157 Find performance of DUT based on RFC2544 with linear / binary / combined
158 search. (Previous LONG tests.)
160 Ethernet frame size tags for performance tests
161 ----------------------------------------------
165 64B frames used for test.
169 78B frames used for test.
173 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
177 1460B frames used for test.
181 1480B frames used for test.
185 1514B frames used for test.
189 1518B frames used for test.
193 9000B frames used for test.
200 Baseline test cases, no encapsulation, no feature(s) configured in tests.
204 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
209 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
214 L2XC baseline test cases, no encapsulation, no feature(s) configured in
219 L2BD baseline test cases, no encapsulation, no feature(s) configured in
228 Test cases where encapsulation is used. Use also encapsulation tag(s).
232 At least one feature is configured in test cases. Use also feature tag(s).
236 Functional test cases for TLDK.
241 .. topic:: L2BDMACSTAT
243 VPP L2 bridge-domain, L2 MAC static.
245 .. topic:: L2BDMACLRN
247 VPP L2 bridge-domain, L2 MAC learning.
251 VPP L2 point-to-point cross-connect.
255 VPP IPv4 routed forwarding.
259 VPP IPv6 routed forwarding.
272 .. topic:: MPLSUNRLAY
285 IPv4 overlay (IPv4 payload).
289 IPv6 overlay (IPv6 payload).
296 All test cases with base Ethernet (no encapsulation).
300 All test cases with dot1q.
304 All test cases with dot1ad.
308 All test cases with LISP.
312 All test cases with LISP-GPE.
316 All test cases with Vxlan.
320 All test cases with VXLAN-GPE.
324 All test cases with GRE.
328 All test cases with IPSEC.
335 All test cases which use physical interface(s).
339 All test cases which uses VHOST.
343 All test cases which uses VHOST with qemu queue size set to 256.
345 .. topic:: VHOST_1024
347 All test cases which uses VHOST with qemu queue size set to 1024.
351 All test cases which uses VM with optimised scheduler policy.
355 All test cases which uses TUN and TAP.
359 All test cases which uses AFPKT.
363 All test cases which uses Netmap.
367 All test cases which uses Memif.
382 SNAT configured and tested.
386 ACL plugin configured and tested.
390 ACL plugin configured and tested on input path.
394 ACL plugin configured and tested on output path.
396 .. topic:: ACL_STATELESS
398 ACL plugin configured and tested in stateless mode (permit action).
400 .. topic:: ACL_STATEFUL
402 ACL plugin configured and tested in stateful mode (permit+reflect action).
406 ACL plugin configured and tested with 1 not-hitting ACE.
410 ACL plugin configured and tested with 10 not-hitting ACEs.
414 ACL plugin configured and tested with 50 not-hitting ACEs.
429 IPSec in transport mode.
433 IPSec in tunnel mode.
440 All test cases which use at least one virtual machine.
444 All test cases which use Linux container.
448 All test cases with specific APP use.
455 All test cases using single poll mode thread.
459 All test cases using more then one poll mode driver thread.
463 All test cases with packet processing on single socket.
467 All test cases with packet processing on two sockets.
471 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
475 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
479 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
480 interface. Main thread pinned to core 0.
484 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
485 interface. Main thread pinned to core 0.
489 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
490 interface. Main thread pinned to core 0.
494 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
495 interface. Main thread pinned to core 0.
499 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
500 interface. Main thread pinned to core 0.
507 Honeycomb functional test cases.
509 .. topic:: HC_PERSIST
511 Honeycomb persistence test cases.
513 .. topic:: HC_REST_ONLY
515 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
516 using ODL client for Restfconf -> Netconf translation.