4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT TAGs and their
12 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
14 3 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 3_NODE_SINGLE_LINK_TOPO
19 3 nodes connected in a circular topology with at least one link
20 interconnecting devices.
27 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
28 and csit-vpp-verify jobs (i.e. CSIT patch).
30 .. topic:: SKIP_VPP_PATCH
32 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
39 DUTs and TGs are running on bare metal.
43 DUTs and TGs are running in virtual environment.
47 DUTs with VPP and capable of running Virtual Machine.
52 .. topic:: NIC_Intel-X520-DA2
56 .. topic:: NIC_Intel-XL710
60 .. topic:: NIC_Intel-X710
64 .. topic:: NIC_Cisco-VIC-1227
68 .. topic:: NIC_Cisco-VIC-1385
77 2x10,000 entries in single fib table
81 2x100,000 entries in single fib table
85 2x1,000,000 entries in single fib table
89 IPSec in tunnel mode - 1000 tunnels.
91 .. topic:: SRC_USER_10
93 Traffic flow with 10 unique IPs (users) in one direction.
95 .. topic:: SRC_USER_100
97 Traffic flow with 100 unique IPs (users) in one direction.
99 .. topic:: SRC_USER_1000
101 Traffic flow with 1000 unique IPs (users) in one direction.
103 .. topic:: SRC_USER_2000
105 Traffic flow with 2000 unique IPs (users) in one direction.
107 .. topic:: SRC_USER_4000
109 Traffic flow with 4000 unique IPs (users) in one direction.
113 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
118 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
121 .. topic:: 100k_FLOWS
123 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
126 Tags marking functional vs. performance of tests
127 ------------------------------------------------
131 All functional test cases.
135 All performance test cases.
137 Performance testing tags
138 ------------------------
142 Partial Drop Rate evaluation of single run result, with non-zero packet
143 loss tolerance (LT) expressed in percentage of packets transmitted.
147 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
148 set to zero lost packets.
152 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
153 Non Drop Rate) with zero packet loss tolerance.
157 Performance tests where TG verifies DUTs' throughput at ref-PDR (reference
158 Partial Drop Rate) with 0.5% loss tolerance.
162 Performance tests where TG sends the traffic at maximum rate (line rate)
163 and reports total sent/received packets over performance trial duration.
165 .. topic:: NDRPDRDISC
167 Find performance of DUT based on :rfc:`2544` with linear / binary / combined
168 search. (Previous LONG tests.)
170 Ethernet frame size tags for performance tests
171 ----------------------------------------------
175 64B frames used for test.
179 78B frames used for test.
183 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
187 1460B frames used for test.
191 1480B frames used for test.
195 1514B frames used for test.
199 1518B frames used for test.
203 9000B frames used for test.
210 Baseline test cases, no encapsulation, no feature(s) configured in tests.
214 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
219 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
224 L2XC baseline test cases, no encapsulation, no feature(s) configured in
229 L2BD baseline test cases, no encapsulation, no feature(s) configured in
238 Test cases where encapsulation is used. Use also encapsulation tag(s).
242 At least one feature is configured in test cases. Use also feature tag(s).
246 Functional test cases for TLDK.
254 Performance tests which measure connections per second using http requests.
258 Performance tests which measure requests per second using http requests.
262 Tests which use HTTP.
267 .. topic:: L2BDMACSTAT
269 VPP L2 bridge-domain, L2 MAC static.
271 .. topic:: L2BDMACLRN
273 VPP L2 bridge-domain, L2 MAC learning.
277 VPP L2 point-to-point cross-connect.
281 VPP IPv4 routed forwarding.
285 VPP IPv6 routed forwarding.
298 .. topic:: MPLSUNRLAY
311 IPv4 overlay (IPv4 payload).
315 IPv6 overlay (IPv6 payload).
322 All test cases with dot1q.
326 All test cases with dot1ad.
333 All test cases with base Ethernet (no encapsulation).
337 All test cases with LISP.
341 All test cases with LISP-GPE.
345 All test cases with Vxlan.
349 All test cases with VXLAN-GPE.
353 All test cases with GRE.
357 All test cases with IPSEC.
364 All test cases which use physical interface(s).
368 All test cases which uses VHOST.
372 All test cases which uses VHOST with qemu queue size set to 256.
374 .. topic:: VHOST_1024
376 All test cases which uses VHOST with qemu queue size set to 1024.
380 All test cases which uses VM with optimised scheduler policy.
384 All test cases which uses TUN and TAP.
388 All test cases which uses AFPKT.
392 All test cases which uses Netmap.
396 All test cases which uses Memif.
411 NAT44 configured and tested.
415 NAT44 configured and tested.
419 ACL plugin configured and tested.
423 ACL plugin configured and tested on input path.
427 ACL plugin configured and tested on output path.
429 .. topic:: ACL_STATELESS
431 ACL plugin configured and tested in stateless mode (permit action).
433 .. topic:: ACL_STATEFUL
435 ACL plugin configured and tested in stateful mode (permit+reflect action).
439 ACL plugin configured and tested with 1 not-hitting ACE.
443 ACL plugin configured and tested with 10 not-hitting ACEs.
447 ACL plugin configured and tested with 50 not-hitting ACEs.
462 IPSec in transport mode.
466 IPSec in tunnel mode.
473 All test cases which use at least one virtual machine.
477 All test cases which use Linux container and LXC utils.
481 All test cases which use Docker as container manager.
485 All test cases with specific APP use.
487 Container orchestration tags
488 ----------------------------
492 All test cases which use Kubernetes for orchestration.
494 .. topic:: SFC_CONTROLLER
496 All test cases which use ligato/sfc_controller for driving configuration
497 of vpp inside container.
501 All test cases which use Golang implementation of a control/management plane
506 VPP running in Docker container acting as VSWITCH.
510 1 VPP running in Docker container acting as VNF work load.
514 2 VPP running in 2 Docker containers acting as VNF work load.
518 4 VPP running in 4 Docker containers acting as VNF work load.
525 All test cases using single poll mode thread.
529 All test cases using more then one poll mode driver thread.
533 All test cases with packet processing on single socket.
537 All test cases with packet processing on two sockets.
541 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
545 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
549 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
550 interface. Main thread pinned to core 0.
554 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
555 interface. Main thread pinned to core 0.
559 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
560 interface. Main thread pinned to core 0.
564 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
565 interface. Main thread pinned to core 0.
569 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
570 interface. Main thread pinned to core 0.
577 Honeycomb functional test cases.
581 Honeycomb NSH test cases.
583 .. topic:: HC_PERSIST
585 Honeycomb persistence test cases.
587 .. topic:: HC_REST_ONLY
589 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
590 using ODL client for Restfconf -> Netconf translation.