4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT TAGs and their
12 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
14 3 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 3_NODE_SINGLE_LINK_TOPO
19 3 nodes connected in a circular topology with at least one link
20 interconnecting devices.
27 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
28 and csit-vpp-verify jobs (i.e. CSIT patch).
30 .. topic:: SKIP_VPP_PATCH
32 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
39 DUTs and TGs are running on bare metal.
43 DUTs and TGs are running in virtual environment.
47 DUTs with VPP and capable of running Virtual Machine.
52 .. topic:: NIC_Intel-X520-DA2
56 .. topic:: NIC_Intel-XL710
60 .. topic:: NIC_Intel-X710
64 .. topic:: NIC_Cisco-VIC-1227
68 .. topic:: NIC_Cisco-VIC-1385
77 2x10,000 entries in single fib table
81 2x100,000 entries in single fib table
85 2x1,000,000 entries in single fib table
89 IPSec in tunnel mode - 1000 tunnels.
91 .. topic:: SRC_USER_10
93 Traffic flow with 10 unique IPs (users) in one direction.
95 .. topic:: SRC_USER_100
97 Traffic flow with 100 unique IPs (users) in one direction.
99 .. topic:: SRC_USER_1000
101 Traffic flow with 1000 unique IPs (users) in one direction.
103 .. topic:: SRC_USER_2000
105 Traffic flow with 2000 unique IPs (users) in one direction.
107 .. topic:: SRC_USER_4000
109 Traffic flow with 4000 unique IPs (users) in one direction.
113 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
118 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
121 .. topic:: 100k_FLOWS
123 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
126 Tags marking functional vs. performance of tests
127 ------------------------------------------------
131 All functional test cases.
135 All performance test cases.
137 Performance testing tags
138 ------------------------
142 Partial Drop Rate evaluation of single run result, with non-zero packet
143 loss tolerance (LT) expressed in percentage of packets transmitted.
147 Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
148 set to zero lost packets.
152 Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
153 Non Drop Rate) with zero packet loss tolerance.
155 .. topic:: NDRPDRDISC
157 Find performance of DUT based on :rfc:`2544` with linear / binary / combined
158 search. (Previous LONG tests.)
160 Ethernet frame size tags for performance tests
161 ----------------------------------------------
165 64B frames used for test.
169 78B frames used for test.
173 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
177 1460B frames used for test.
181 1480B frames used for test.
185 1514B frames used for test.
189 1518B frames used for test.
193 9000B frames used for test.
200 Baseline test cases, no encapsulation, no feature(s) configured in tests.
204 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
209 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
214 L2XC baseline test cases, no encapsulation, no feature(s) configured in
219 L2BD baseline test cases, no encapsulation, no feature(s) configured in
228 Test cases where encapsulation is used. Use also encapsulation tag(s).
232 At least one feature is configured in test cases. Use also feature tag(s).
236 Functional test cases for TLDK.
244 Performance tests which measure connections per second using http requests.
248 Performance tests which measure requests per second using http requests.
252 Tests which use HTTP.
257 .. topic:: L2BDMACSTAT
259 VPP L2 bridge-domain, L2 MAC static.
261 .. topic:: L2BDMACLRN
263 VPP L2 bridge-domain, L2 MAC learning.
267 VPP L2 point-to-point cross-connect.
271 VPP IPv4 routed forwarding.
275 VPP IPv6 routed forwarding.
288 .. topic:: MPLSUNRLAY
301 IPv4 overlay (IPv4 payload).
305 IPv6 overlay (IPv6 payload).
312 All test cases with dot1q.
316 All test cases with dot1ad.
323 All test cases with base Ethernet (no encapsulation).
327 All test cases with LISP.
331 All test cases with LISP-GPE.
335 All test cases with Vxlan.
339 All test cases with VXLAN-GPE.
343 All test cases with GRE.
347 All test cases with IPSEC.
354 All test cases which use physical interface(s).
358 All test cases which uses VHOST.
362 All test cases which uses VHOST with qemu queue size set to 256.
364 .. topic:: VHOST_1024
366 All test cases which uses VHOST with qemu queue size set to 1024.
370 All test cases which uses VM with optimised scheduler policy.
374 All test cases which uses TUN and TAP.
378 All test cases which uses AFPKT.
382 All test cases which uses Netmap.
386 All test cases which uses Memif.
401 NAT44 configured and tested.
405 NAT44 configured and tested.
409 ACL plugin configured and tested.
413 ACL plugin configured and tested on input path.
417 ACL plugin configured and tested on output path.
419 .. topic:: ACL_STATELESS
421 ACL plugin configured and tested in stateless mode (permit action).
423 .. topic:: ACL_STATEFUL
425 ACL plugin configured and tested in stateful mode (permit+reflect action).
429 ACL plugin configured and tested with 1 not-hitting ACE.
433 ACL plugin configured and tested with 10 not-hitting ACEs.
437 ACL plugin configured and tested with 50 not-hitting ACEs.
452 IPSec in transport mode.
456 IPSec in tunnel mode.
463 All test cases which use at least one virtual machine.
467 All test cases which use Linux container and LXC utils.
471 All test cases which use Docker as container manager.
475 All test cases with specific APP use.
477 Container orchestration tags
478 ----------------------------
482 All test cases which use Kubernetes for orchestration.
484 .. topic:: SFC_CONTROLLER
486 All test cases which use ligato/sfc_controller for driving configuration
487 of vpp inside container.
491 All test cases which use Golang implementation of a control/management plane
496 VPP running in Docker container acting as VSWITCH.
500 1 VPP running in Docker container acting as VNF work load.
504 2 VPP running in 2 Docker containers acting as VNF work load.
508 4 VPP running in 4 Docker containers acting as VNF work load.
515 All test cases using single poll mode thread.
519 All test cases using more then one poll mode driver thread.
523 All test cases with packet processing on single socket.
527 All test cases with packet processing on two sockets.
531 All test cases with symmetric Multi-Threading (HyperThreading) enabled.
535 All test cases with symmetric Multi-Threading (HyperThreading) disabled.
539 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
540 interface. Main thread pinned to core 0.
544 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
545 interface. Main thread pinned to core 0.
549 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
550 interface. Main thread pinned to core 0.
554 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
555 interface. Main thread pinned to core 0.
559 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
560 interface. Main thread pinned to core 0.
567 Honeycomb functional test cases.
571 Honeycomb NSH test cases.
573 .. topic:: HC_PERSIST
575 Honeycomb persistence test cases.
577 .. topic:: HC_REST_ONLY
579 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
580 using ODL client for Restfconf -> Netconf translation.