1 # Copyright (c) 2015 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
14 # Scripts require non-POSIX parts of bash
17 DPDK_BUILD_DIR ?= $(CURDIR)/_build
18 DPDK_INSTALL_DIR ?= $(CURDIR)/_install
19 DPDK_PKTMBUF_HEADROOM ?= 128
20 DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads
25 B := $(DPDK_BUILD_DIR)
26 I := $(DPDK_INSTALL_DIR)
29 DPDK_BASE_URL ?= http://fast.dpdk.org/rel
30 DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
31 DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
32 DPDK_17.05_TARBALL_MD5_CKSUM := 0a68c31cd6a6cabeed0a4331073e4c05
33 DPDK_17.08_TARBALL_MD5_CKSUM := 0641f59ea8ea98afefa7cfa2699f6241
34 DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
35 MACHINE=$(shell uname -m)
41 ISA_L_CRYPTO_VER := 2.18.0
43 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
45 # DPDK pre 17.08 depends on ISA-L Crypto library for GCM PMD
46 ifneq ($(firstword $(sort $(DPDK_VERSION), 17.08)), 17.08)
49 $(info Building ISA-L Crypto $(ISA_L_CRYPTO_VER) library)
51 $(info Building IPSec-MB $(IPSEC_MB_VER) library)
54 AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
55 AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
56 AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
58 ISA_L_CRYPTO_LIB_TARBALL := v$(ISA_L_CRYPTO_VER).tar.gz
59 ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/$(ISA_L_CRYPTO_LIB_TARBALL)
60 ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-$(ISA_L_CRYPTO_VER)
61 ISA_L_CRYPTO_INSTALL_DIR := $(ISA_L_CRYPTO_LIB_SOURCE)/install
63 ifneq (,$(findstring clang,$(CC)))
65 else ifneq (,$(findstring icc,$(CC)))
71 ##############################################################################
73 ##############################################################################
74 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
75 DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
77 DPDK_TUNE ?= core-avx2
78 else ifeq ($(MACHINE),aarch64)
80 ifneq (,$(findstring thunder,$(shell [[ -f /sys/bus/pci/devices/0000:00:01.0/uevent ]] && cat /sys/bus/pci/devices/0000:00:01.0/uevent | grep cavium)))
81 ##############################################################################
83 ##############################################################################
84 DPDK_TARGET ?= arm64-thunderx-linuxapp-$(DPDK_CC)
85 DPDK_MACHINE ?= thunderx
88 ##############################################################################
90 ##############################################################################
91 DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC)
92 DPDK_MACHINE ?= armv8a
96 ##############################################################################
98 ##############################################################################
100 $(error unknown platform)
103 # /proc/cpuinfo does not exist on platforms without a /proc and on some
104 # platforms, notably inside containers, it has no content. In those cases
105 # we assume there's 1 processor; we use 2*ncpu for the -j option.
106 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
107 # for file presence and content; for now this will have to do.
108 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
109 $(shell expr 2 '*' $$(grep -c ^processor /proc/cpuinfo)), 2)
111 # compiler/linker custom arguments
112 DPDK_CPU_CFLAGS := -pie -fPIC
113 DPDK_EXTRA_LDFLAGS := -g
115 ifeq ($(DPDK_DEBUG),n)
116 DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
118 DPDK_EXTRA_CFLAGS := -g -O0
121 ifeq ($(ISA_L_CRYPTO_LIB),y)
122 DPDK_EXTRA_CFLAGS += -I$(ISA_L_CRYPTO_INSTALL_DIR)/include -Wl,-z,muldefs
123 DPDK_EXTRA_LDFLAGS += -L$(I)/lib
125 DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
127 # assemble DPDK make arguments
128 DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
130 RTE_CONFIG_TEMPLATE=../custom-config \
131 EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
132 EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
133 CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
135 $(DPDK_MAKE_EXTRA_ARGS)
138 @if grep -q CONFIG_$1 $@ ; \
139 then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
140 else echo CONFIG_$1=$2 >> $@ ; \
146 $(B)/custom-config: $(B)/.patch.ok Makefile
147 @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
148 @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
149 $(call set,RTE_MACHINE,$(DPDK_MACHINE))
151 $(call set,RTE_MAX_LCORE,256)
152 $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
153 $(call set,RTE_LIBEAL_USE_HPET,y)
154 $(call set,RTE_BUILD_COMBINE_LIBS,y)
155 $(call set,RTE_PCI_CONFIG,y)
156 $(call set,RTE_PCI_EXTENDED_TAG,"on")
157 $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
158 @# enable debug init for device drivers
159 $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
160 $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
161 $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
162 $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
163 $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
164 $(call set,RTE_LIBRTE_PMD_BOND,y)
165 $(call set,RTE_LIBRTE_IP_FRAG,y)
166 $(call set,RTE_LIBRTE_PMD_QAT,y)
167 $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
168 $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
169 $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
170 $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
172 $(call set,RTE_LIBRTE_PMD_TAP,n)
173 $(call set,RTE_LIBRTE_TIMER,n)
174 $(call set,RTE_LIBRTE_CFGFILE,n)
175 $(call set,RTE_LIBRTE_LPM,n)
176 $(call set,RTE_LIBRTE_ACL,n)
177 $(call set,RTE_LIBRTE_POWER,n)
178 $(call set,RTE_LIBRTE_DISTRIBUTOR,n)
179 $(call set,RTE_LIBRTE_PORT,n)
180 $(call set,RTE_LIBRTE_TABLE,n)
181 $(call set,RTE_LIBRTE_PIPELINE,n)
182 $(call set,RTE_KNI_KMOD,n)
183 $(call set,RTE_EAL_IGB_UIO,n)
186 $(CURDIR)/$(DPDK_TARBALL):
187 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
188 then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
189 else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
191 @rm -f $(B)/.download.ok
193 $(CURDIR)/$(AESNIMB_LIB_TARBALL):
194 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
195 then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
196 else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
199 $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL):
200 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \
201 then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \
202 else curl -o $@ -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \
205 DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
207 DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
209 ifeq ($(ISA_L_CRYPTO_LIB),y)
210 DPDK_DOWNLOADS += $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
213 $(B)/.download.ok: $(DPDK_DOWNLOADS)
215 @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
216 @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
217 ( echo "Bad Checksum! Please remove $< and retry" && \
218 rm $(B)/$(DPDK_TARBALL).md5sum && false ))
222 download: $(B)/.download.ok
224 $(B)/.extract.ok: $(B)/.download.ok
225 @echo --- extracting $(DPDK_TARBALL) ---
226 @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
228 @echo --- extracting $(AESNIMB_LIB_TARBALL) ---
229 @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
231 ifeq ($(ISA_L_CRYPTO_LIB),y)
232 @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) ---
233 @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
238 extract: $(B)/.extract.ok
240 $(B)/.patch.ok: $(B)/.extract.ok
241 ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
242 @echo --- patching ---
243 @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
244 echo Applying patch: $$(basename $$f) ; \
245 patch -p1 -d $(DPDK_SOURCE) < $$f ; \
251 patch: $(B)/.patch.ok
253 $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
254 @make $(DPDK_MAKE_ARGS) config
258 config: $(B)/.config.ok
260 .PHONY: build-ipsec-mb
263 # Do not build GCM stuff if we are building ISA_L
264 make -C $(AESNIMB_LIB_SOURCE) -j NO_GCM=$(ISA_L_CRYPTO_LIB)
265 cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
267 .PHONY: build-isal-crypto
270 cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && \
271 ./configure --prefix=$(ISA_L_CRYPTO_INSTALL_DIR) \
272 --libdir=$(ISA_L_CRYPTO_INSTALL_DIR)/lib CFLAGS='-fPIC -DPIC -O2'
273 make -C $(ISA_L_CRYPTO_LIB_SOURCE) -j install
274 cp $(ISA_L_CRYPTO_INSTALL_DIR)/lib/libisal_crypto.a $(I)/lib/
278 @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
279 @make $(DPDK_MAKE_ARGS) install
283 BUILD_TARGETS += build-ipsec-mb
285 ifeq ($(ISA_L_CRYPTO_LIB),y)
286 BUILD_TARGETS += build-isal-crypto
288 BUILD_TARGETS += build-dpdk
290 $(B)/.build.ok: $(BUILD_TARGETS)
294 build: $(B)/.build.ok
297 install: $(B)/.build.ok
303 ##############################################################################
305 ##############################################################################
307 DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
308 DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
309 INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)
311 .PHONY: build-deb install-deb check-deb
313 deb/debian/changelog: Makefile
314 @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
316 @echo " * DPDK Release $(DPDK_VERSION)" >> $@
318 @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@
320 $(DEV_DEB): deb/debian/changelog
321 @cd deb && dpkg-buildpackage -b -uc -us
324 build-deb: $(DEV_DEB)
327 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
329 @sudo dpkg -i $(DEV_DEB)
331 @echo "=========================================================="
332 @echo " Up-to-date DPDK package already installed"
333 @echo "=========================================================="
337 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
338 @echo "=========================================================="
339 @echo " Outdated DPDK package detected:"
340 @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
341 @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
343 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
344 @echo " from the top level directory."
345 @echo "=========================================================="
348 ##############################################################################
350 ##############################################################################
352 RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
353 DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
354 INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")
356 .PHONY: build-rpm install-rpm check-rpm
358 $(DEV_RPM): Makefile rpm/vpp-dpdk.spec
360 --define "_topdir $(CURDIR)/rpm" \
361 --define "_version $(DPDK_VERSION)" \
362 --define "_release $(PKG_SUFFIX)" \
363 $(CURDIR)/rpm/vpp-dpdk.spec
364 mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
367 build-rpm: $(DEV_RPM)
370 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
372 sudo rpm -Uih $(DEV_RPM)
374 @echo "=========================================================="
375 @echo " Up-to-date DPDK package already installed"
376 @echo "=========================================================="
380 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
381 @echo "=========================================================="
382 @echo " Outdated DPDK package detected:"
383 @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
384 @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
386 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
387 @echo " from the top level directory."
388 @echo "=========================================================="
391 ##############################################################################
393 ##############################################################################
395 .PHONY: ebuild-build ebuild-install
398 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
399 @echo "=========================================================="
400 @echo "Building DPDK from source. Consider installing development"
401 @echo "package by invoking 'make dpdk-install-dev' from the"
402 @echo "top level directory"
403 @echo "=========================================================="
406 ifneq ($(INSTALLED_DEB_VER),)
409 ifneq ($(INSTALLED_RPM_VER),)
415 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)