1 # Copyright (c) 2015 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
14 # Scripts require non-POSIX parts of bash
17 DPDK_BUILD_DIR ?= $(CURDIR)/_build
18 DPDK_INSTALL_DIR ?= $(CURDIR)/_install
19 DPDK_PKTMBUF_HEADROOM ?= 128
20 DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads
25 B := $(DPDK_BUILD_DIR)
26 I := $(DPDK_INSTALL_DIR)
29 DPDK_BASE_URL ?= http://fast.dpdk.org/rel
30 DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
31 DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
32 DPDK_17.02_TARBALL_MD5_CKSUM := 6b9f7387c35641f4e8dbba3e528f2376
33 DPDK_17.05_TARBALL_MD5_CKSUM := 0a68c31cd6a6cabeed0a4331073e4c05
34 DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
37 AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
38 AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
39 AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
40 ISA_L_CRYPTO_VER := 2.18.0
41 ISA_L_CRYPTO_LIB_TARBALL := v$(ISA_L_CRYPTO_VER).tar.gz
42 ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/$(ISA_L_CRYPTO_LIB_TARBALL)
43 ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-$(ISA_L_CRYPTO_VER)
44 ISA_L_CRYPTO_INSTALL_DIR := $(ISA_L_CRYPTO_LIB_SOURCE)/install
46 ifneq (,$(findstring clang,$(CC)))
48 else ifneq (,$(findstring icc,$(CC)))
54 MACHINE=$(shell uname -m)
56 ##############################################################################
58 ##############################################################################
59 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
60 DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
62 DPDK_TUNE ?= core-avx2
64 ##############################################################################
66 ##############################################################################
67 else ifneq (,$(findstring thunder,$(shell cat /sys/bus/pci/devices/0000:00:01.0/uevent | grep cavium)))
69 DPDK_TARGET ?= arm64-thunderx-linuxapp-$(DPDK_CC)
70 DPDK_MACHINE ?= thunderx
73 ##############################################################################
75 ##############################################################################
77 $(error unknown platform)
80 # /proc/cpuinfo does not exist on platforms without a /proc and on some
81 # platforms, notably inside containers, it has no content. In those cases
82 # we assume there's 1 processor; we use 2*ncpu for the -j option.
83 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
84 # for file presence and content; for now this will have to do.
85 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
86 $(shell expr 2 '*' $$(grep -c ^processor /proc/cpuinfo)), 2)
88 # compiler/linker custom arguments
89 DPDK_CPU_CFLAGS := -pie -fPIC
90 DPDK_EXTRA_LDFLAGS := -g
92 ifeq ($(DPDK_DEBUG),n)
93 DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
95 DPDK_EXTRA_CFLAGS := -g -O0
98 DPDK_EXTRA_CFLAGS += -I$(ISA_L_CRYPTO_INSTALL_DIR)/include -Wl,-z,muldefs
99 DPDK_EXTRA_LDFLAGS += -L$(I)/lib
100 DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
102 # assemble DPDK make arguments
103 DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
105 RTE_CONFIG_TEMPLATE=../custom-config \
106 EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
107 EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
108 CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
110 $(DPDK_MAKE_EXTRA_ARGS)
113 @if grep -q CONFIG_$1 $@ ; \
114 then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
115 else echo CONFIG_$1=$2 >> $@ ; \
121 $(B)/custom-config: $(B)/.patch.ok Makefile
122 @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
123 @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
124 $(call set,RTE_MACHINE,$(DPDK_MACHINE))
126 $(call set,RTE_MAX_LCORE,256)
127 $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
128 $(call set,RTE_LIBEAL_USE_HPET,y)
129 $(call set,RTE_BUILD_COMBINE_LIBS,y)
130 $(call set,RTE_PCI_CONFIG,y)
131 $(call set,RTE_PCI_EXTENDED_TAG,"on")
132 $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
133 @# enable debug init for device drivers
134 $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
135 $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
136 $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
137 $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
138 $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
139 $(call set,RTE_LIBRTE_PMD_BOND,y)
140 $(call set,RTE_LIBRTE_IP_FRAG,y)
141 $(call set,RTE_LIBRTE_PMD_QAT,y)
142 $(call set,RTE_LIBRTE_PMD_AESNI_MB,y)
143 $(call set,RTE_LIBRTE_PMD_AESNI_GCM,y)
144 $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
145 $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
147 $(call set,RTE_LIBRTE_TIMER,n)
148 $(call set,RTE_LIBRTE_CFGFILE,n)
149 $(call set,RTE_LIBRTE_LPM,n)
150 $(call set,RTE_LIBRTE_ACL,n)
151 $(call set,RTE_LIBRTE_POWER,n)
152 $(call set,RTE_LIBRTE_DISTRIBUTOR,n)
153 $(call set,RTE_LIBRTE_PORT,n)
154 $(call set,RTE_LIBRTE_TABLE,n)
155 $(call set,RTE_LIBRTE_PIPELINE,n)
156 $(call set,RTE_KNI_KMOD,n)
157 $(call set,RTE_EAL_IGB_UIO,n)
160 $(CURDIR)/$(DPDK_TARBALL):
161 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
162 then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
163 else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
165 @rm -f $(B)/.download.ok
167 $(CURDIR)/$(AESNIMB_LIB_TARBALL):
168 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
169 then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
170 else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
173 $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL):
174 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \
175 then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \
176 else curl -o $@ -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \
179 DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
180 DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
181 DPDK_DOWNLOADS += $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
183 $(B)/.download.ok: $(DPDK_DOWNLOADS)
185 @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
186 @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
187 ( echo "Bad Checksum! Please remove $< and retry" && \
188 rm $(B)/$(DPDK_TARBALL).md5sum && false ))
192 download: $(B)/.download.ok
194 $(B)/.extract.ok: $(B)/.download.ok
195 @echo --- extracting $(DPDK_TARBALL) ---
196 @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
197 @echo --- extracting $(AESNIMB_LIB_TARBALL) ---
198 @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
199 @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) ---
200 @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
204 extract: $(B)/.extract.ok
206 $(B)/.patch.ok: $(B)/.extract.ok
207 ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
208 @echo --- patching ---
209 @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
210 echo Applying patch: $$(basename $$f) ; \
211 patch -p1 -d $(DPDK_SOURCE) < $$f ; \
217 patch: $(B)/.patch.ok
219 $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
220 @make $(DPDK_MAKE_ARGS) config
224 config: $(B)/.config.ok
227 BUILD_TARGETS += build-ipsec-mb build-isal-crypto build-dpdk
229 .PHONY: build-ipsec-mb
232 make -C $(AESNIMB_LIB_SOURCE) -j NO_GCM=y
233 cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
235 .PHONY: build-isal-crypto
238 cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && \
239 ./configure --prefix=$(ISA_L_CRYPTO_INSTALL_DIR) CFLAGS='-fPIC -DPIC -O2'
240 make -C $(ISA_L_CRYPTO_LIB_SOURCE) -j install
241 cp $(ISA_L_CRYPTO_INSTALL_DIR)/lib/libisal_crypto.a $(I)/lib/
245 @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
246 @make $(DPDK_MAKE_ARGS) install
248 $(B)/.build.ok: $(BUILD_TARGETS)
252 build: $(B)/.build.ok
255 install: $(B)/.build.ok
261 ##############################################################################
263 ##############################################################################
265 DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
266 DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
267 INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)
269 .PHONY: build-deb install-deb check-deb
271 deb/debian/changelog: Makefile
272 @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
274 @echo " * DPDK Release $(DPDK_VERSION)" >> $@
276 @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@
278 $(DEV_DEB): deb/debian/changelog
279 @cd deb && dpkg-buildpackage -b -uc -us
282 build-deb: $(DEV_DEB)
285 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
287 @sudo dpkg -i $(DEV_DEB)
289 @echo "=========================================================="
290 @echo " Up-to-date DPDK package already installed"
291 @echo "=========================================================="
295 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
296 @echo "=========================================================="
297 @echo " Outdated DPDK package detected:"
298 @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
299 @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
301 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
302 @echo " from the top level directory."
303 @echo "=========================================================="
306 ##############################################################################
308 ##############################################################################
310 RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
311 DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
312 INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")
314 .PHONY: build-rpm install-rpm check-rpm
316 $(DEV_RPM): Makefile rpm/vpp-dpdk.spec
318 --define "_topdir $(CURDIR)/rpm" \
319 --define "_version $(DPDK_VERSION)" \
320 --define "_release $(PKG_SUFFIX)" \
321 $(CURDIR)/rpm/vpp-dpdk.spec
322 mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
325 build-rpm: $(DEV_RPM)
328 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
330 sudo rpm -Uih $(DEV_RPM)
332 @echo "=========================================================="
333 @echo " Up-to-date DPDK package already installed"
334 @echo "=========================================================="
338 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
339 @echo "=========================================================="
340 @echo " Outdated DPDK package detected:"
341 @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
342 @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
344 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
345 @echo " from the top level directory."
346 @echo "=========================================================="
349 ##############################################################################
351 ##############################################################################
353 .PHONY: ebuild-build ebuild-install
356 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
357 @echo "=========================================================="
358 @echo "Building DPDK from source. Consider installing development"
359 @echo "package by invoking 'make dpdk-install-dev' from the"
360 @echo "top level directory"
361 @echo "=========================================================="
364 ifneq ($(INSTALLED_DEB_VER),)
367 ifneq ($(INSTALLED_RPM_VER),)
373 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)