1 # Copyright (c) 2015 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
14 # Scripts require non-POSIX parts of bash
17 DPDK_BUILD_DIR ?= $(CURDIR)/_build
18 DPDK_INSTALL_DIR ?= $(CURDIR)/_install
19 DPDK_PKTMBUF_HEADROOM ?= 128
20 DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads
25 B := $(DPDK_BUILD_DIR)
26 I := $(DPDK_INSTALL_DIR)
29 DPDK_BASE_URL ?= http://fast.dpdk.org/rel
30 DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
31 DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
32 DPDK_17.02_TARBALL_MD5_CKSUM := 6b9f7387c35641f4e8dbba3e528f2376
33 DPDK_17.05_TARBALL_MD5_CKSUM := 0a68c31cd6a6cabeed0a4331073e4c05
34 DPDK_17.08_TARBALL_MD5_CKSUM := 0641f59ea8ea98afefa7cfa2699f6241
35 DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
37 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
44 AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
45 AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
46 AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
47 ISA_L_CRYPTO_VER := 2.18.0
48 ISA_L_CRYPTO_LIB_TARBALL := v$(ISA_L_CRYPTO_VER).tar.gz
49 ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/$(ISA_L_CRYPTO_LIB_TARBALL)
50 ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-$(ISA_L_CRYPTO_VER)
51 ISA_L_CRYPTO_INSTALL_DIR := $(ISA_L_CRYPTO_LIB_SOURCE)/install
53 ifneq (,$(findstring clang,$(CC)))
55 else ifneq (,$(findstring icc,$(CC)))
61 MACHINE=$(shell uname -m)
63 ##############################################################################
65 ##############################################################################
66 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
67 DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
69 DPDK_TUNE ?= core-avx2
70 ##############################################################################
72 ##############################################################################
73 else ifneq (,$(findstring thunder,$(shell cat /sys/bus/pci/devices/0000:00:01.0/uevent | grep cavium)))
75 DPDK_TARGET ?= arm64-thunderx-linuxapp-$(DPDK_CC)
76 DPDK_MACHINE ?= thunderx
79 ##############################################################################
81 ##############################################################################
83 $(error unknown platform)
86 # /proc/cpuinfo does not exist on platforms without a /proc and on some
87 # platforms, notably inside containers, it has no content. In those cases
88 # we assume there's 1 processor; we use 2*ncpu for the -j option.
89 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
90 # for file presence and content; for now this will have to do.
91 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
92 $(shell expr 2 '*' $$(grep -c ^processor /proc/cpuinfo)), 2)
94 # compiler/linker custom arguments
95 DPDK_CPU_CFLAGS := -pie -fPIC
96 DPDK_EXTRA_LDFLAGS := -g
98 ifeq ($(DPDK_DEBUG),n)
99 DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
101 DPDK_EXTRA_CFLAGS := -g -O0
104 DPDK_EXTRA_CFLAGS += -I$(ISA_L_CRYPTO_INSTALL_DIR)/include -Wl,-z,muldefs
105 DPDK_EXTRA_LDFLAGS += -L$(I)/lib
106 DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
108 # assemble DPDK make arguments
109 DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
111 RTE_CONFIG_TEMPLATE=../custom-config \
112 EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
113 EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
114 CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
116 $(DPDK_MAKE_EXTRA_ARGS)
119 @if grep -q CONFIG_$1 $@ ; \
120 then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
121 else echo CONFIG_$1=$2 >> $@ ; \
127 $(B)/custom-config: $(B)/.patch.ok Makefile
128 @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
129 @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
130 $(call set,RTE_MACHINE,$(DPDK_MACHINE))
132 $(call set,RTE_MAX_LCORE,256)
133 $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
134 $(call set,RTE_LIBEAL_USE_HPET,y)
135 $(call set,RTE_BUILD_COMBINE_LIBS,y)
136 $(call set,RTE_PCI_CONFIG,y)
137 $(call set,RTE_PCI_EXTENDED_TAG,"on")
138 $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
139 @# enable debug init for device drivers
140 $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
141 $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
142 $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
143 $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
144 $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
145 $(call set,RTE_LIBRTE_PMD_BOND,y)
146 $(call set,RTE_LIBRTE_IP_FRAG,y)
147 $(call set,RTE_LIBRTE_PMD_QAT,y)
148 $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
149 $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
150 $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
151 $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
153 $(call set,RTE_LIBRTE_PMD_TAP,n)
154 $(call set,RTE_LIBRTE_TIMER,n)
155 $(call set,RTE_LIBRTE_CFGFILE,n)
156 $(call set,RTE_LIBRTE_LPM,n)
157 $(call set,RTE_LIBRTE_ACL,n)
158 $(call set,RTE_LIBRTE_POWER,n)
159 $(call set,RTE_LIBRTE_DISTRIBUTOR,n)
160 $(call set,RTE_LIBRTE_PORT,n)
161 $(call set,RTE_LIBRTE_TABLE,n)
162 $(call set,RTE_LIBRTE_PIPELINE,n)
163 $(call set,RTE_KNI_KMOD,n)
164 $(call set,RTE_EAL_IGB_UIO,n)
167 $(CURDIR)/$(DPDK_TARBALL):
168 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
169 then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
170 else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
172 @rm -f $(B)/.download.ok
174 $(CURDIR)/$(AESNIMB_LIB_TARBALL):
175 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
176 then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
177 else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
180 $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL):
181 @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \
182 then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \
183 else curl -o $@ -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \
186 DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
188 DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
189 DPDK_DOWNLOADS += $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
192 $(B)/.download.ok: $(DPDK_DOWNLOADS)
194 @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
195 @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
196 ( echo "Bad Checksum! Please remove $< and retry" && \
197 rm $(B)/$(DPDK_TARBALL).md5sum && false ))
201 download: $(B)/.download.ok
203 $(B)/.extract.ok: $(B)/.download.ok
204 @echo --- extracting $(DPDK_TARBALL) ---
205 @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
207 @echo --- extracting $(AESNIMB_LIB_TARBALL) ---
208 @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
209 @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) ---
210 @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL)
215 extract: $(B)/.extract.ok
217 $(B)/.patch.ok: $(B)/.extract.ok
218 ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
219 @echo --- patching ---
220 @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
221 echo Applying patch: $$(basename $$f) ; \
222 patch -p1 -d $(DPDK_SOURCE) < $$f ; \
228 patch: $(B)/.patch.ok
230 $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
231 @make $(DPDK_MAKE_ARGS) config
235 config: $(B)/.config.ok
239 BUILD_TARGETS += build-ipsec-mb build-isal-crypto build-dpdk
241 BUILD_TARGETS += build-dpdk
244 .PHONY: build-ipsec-mb
247 make -C $(AESNIMB_LIB_SOURCE) -j NO_GCM=y
248 cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
250 .PHONY: build-isal-crypto
253 cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && \
254 ./configure --prefix=$(ISA_L_CRYPTO_INSTALL_DIR) \
255 --libdir=$(ISA_L_CRYPTO_INSTALL_DIR)/lib CFLAGS='-fPIC -DPIC -O2'
256 make -C $(ISA_L_CRYPTO_LIB_SOURCE) -j install
257 cp $(ISA_L_CRYPTO_INSTALL_DIR)/lib/libisal_crypto.a $(I)/lib/
261 @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
262 @make $(DPDK_MAKE_ARGS) install
264 $(B)/.build.ok: $(BUILD_TARGETS)
268 build: $(B)/.build.ok
271 install: $(B)/.build.ok
277 ##############################################################################
279 ##############################################################################
281 DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
282 DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
283 INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)
285 .PHONY: build-deb install-deb check-deb
287 deb/debian/changelog: Makefile
288 @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
290 @echo " * DPDK Release $(DPDK_VERSION)" >> $@
292 @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@
294 $(DEV_DEB): deb/debian/changelog
295 @cd deb && dpkg-buildpackage -b -uc -us
298 build-deb: $(DEV_DEB)
301 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
303 @sudo dpkg -i $(DEV_DEB)
305 @echo "=========================================================="
306 @echo " Up-to-date DPDK package already installed"
307 @echo "=========================================================="
311 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
312 @echo "=========================================================="
313 @echo " Outdated DPDK package detected:"
314 @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
315 @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
317 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
318 @echo " from the top level directory."
319 @echo "=========================================================="
322 ##############################################################################
324 ##############################################################################
326 RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
327 DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
328 INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")
330 .PHONY: build-rpm install-rpm check-rpm
332 $(DEV_RPM): Makefile rpm/vpp-dpdk.spec
334 --define "_topdir $(CURDIR)/rpm" \
335 --define "_version $(DPDK_VERSION)" \
336 --define "_release $(PKG_SUFFIX)" \
337 $(CURDIR)/rpm/vpp-dpdk.spec
338 mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
341 build-rpm: $(DEV_RPM)
344 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
346 sudo rpm -Uih $(DEV_RPM)
348 @echo "=========================================================="
349 @echo " Up-to-date DPDK package already installed"
350 @echo "=========================================================="
354 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
355 @echo "=========================================================="
356 @echo " Outdated DPDK package detected:"
357 @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
358 @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
360 @echo " Please upgrade by invoking 'make dpdk-install-dev'"
361 @echo " from the top level directory."
362 @echo "=========================================================="
365 ##############################################################################
367 ##############################################################################
369 .PHONY: ebuild-build ebuild-install
372 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
373 @echo "=========================================================="
374 @echo "Building DPDK from source. Consider installing development"
375 @echo "package by invoking 'make dpdk-install-dev' from the"
376 @echo "top level directory"
377 @echo "=========================================================="
380 ifneq ($(INSTALLED_DEB_VER),)
383 ifneq ($(INSTALLED_RPM_VER),)
389 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)