1 # Copyright (c) 2016 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
15 | Library | resources.libraries.python.L2Util
16 | Library | resources.libraries.python.honeycomb.HcAPIKwBridgeDomain.BridgeDomainKeywords
17 | Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
18 | ... | WITH NAME | InterfaceAPI
19 | Library | resources.libraries.python.InterfaceUtil
20 | ... | WITH NAME | interfaceCLI
23 | Honeycomb creates first L2 bridge domain
24 | | [Documentation] | Uses Honeycomb API to create a bridge domain on the \
25 | | ... | VPP node. Any other bridge domains will be removed in the process.
27 | | ... | *Arguments:*
28 | | ... | - node - Information about a DUT node. Type: dictionary
29 | | ... | - bd_name - Name of the created bridge domain. Type: string
30 | | ... | - settings - Settings for the created bridge domain. Type: dictionary
34 | | ... | \| Honeycomb creates first L2 bridge domain \| ${nodes['DUT1']} \
35 | | ... | \| bd-04 \| ${{flood:True, learn:False}} \|
36 | | [Arguments] | ${node} | ${bd_name} | ${settings}
37 | | Add first BD | ${node} | ${bd_name} | &{settings}
39 | Honeycomb creates L2 bridge domain
40 | | [Documentation] | Uses Honeycomb API to create a bridge domain on the \
43 | | ... | *Arguments:*
44 | | ... | - node - Information about a DUT node. Type: dictionary
45 | | ... | - bd_name - Name of the created bridge domain. Type: string
46 | | ... | - settings - Settings for the created bridge domain. Type: dictionary
50 | | ... | \| Honeycomb creates L2 bridge domain \| ${nodes['DUT1']} \
51 | | ... | \| bd-04 \| ${{flood:True, learn:False}} \|
52 | | [Arguments] | ${node} | ${bd_name} | ${settings}
53 | | Add BD | ${node} | ${bd_name} | &{settings}
55 | Bridge domain configuration from Honeycomb should be
56 | | [Documentation] | Uses Honeycomb API to verify bridge domain settings\
57 | | ... | against provided values.
59 | | ... | *Arguments:*
60 | | ... | - node - Information about a DUT node. Type: dictionary
61 | | ... | - bd_name - Name of the bridge domain. Type: string
62 | | ... | - settings - Expected settings for the bridge domain. Type: dictionary
66 | | ... | \| Bridge domain configuration from Honeycomb should be \
67 | | ... | \| ${nodes['DUT1']} \| bd-04 \| ${{flood:True,learn:False}} \|
68 | | [Arguments] | ${node} | ${bd_name} | ${settings}
69 | | ${api_data}= | Get bd oper data | ${node} | ${bd_name}
70 | | :FOR | ${key} | IN | @{settings.keys()}
71 | | | Should be equal | ${settings['${key}']} | ${api_data['${key}']}
73 | Bridge domain configuration from VAT should be
74 | | [Documentation] | Uses VAT to verify bridge domain settings\
75 | | ... | against provided values.
77 | | ... | *Arguments:*
78 | | ... | - node - Information about a DUT node. Type: dictionary
79 | | ... | - bd_name - Name of the bridge domain. Type: string
80 | | ... | - settings - Expected settings for the bridge domain. Type: dictionary
84 | | ... | \| Bridge domain configuration from VAT should be \
85 | | ... | \| ${nodes['DUT1']} \| bd-04 \| ${{flood:True,learn:False}} \|
86 | | [Arguments] | ${node} | ${bd_index} | ${settings}
87 | | ${vat_data}= | VPP get bridge domain data | ${node}
88 | | ${vat_data}= | Set Variable | ${vat_data[${bd_index}]}
89 | | :FOR | ${key} | IN | @{settings.keys()}
90 | | | Run keyword if | $key in $vat_data.keys()
91 | | | ... | Should be equal | ${settings['${key}']} | ${vat_data['${key}']}
93 | Honeycomb adds interfaces to bridge domain
94 | | [Documentation] | Uses Honeycomb API to assign interfaces to a bridge\
97 | | ... | *Arguments:*
98 | | ... | - node - Information about a DUT node. Type: dictionary
99 | | ... | - interface1, interface2 - Names of interfaces to assign to bridge\
100 | | ... | domain. Type: string
101 | | ... | - bd_name - Name of the bridge domain. Type: string
102 | | ... | - settings - Bridge domain specific interface settings.\
103 | | ... | Type: dictionary
107 | | ... | \| Honeycomb adds interfaces to bridge domain \| ${nodes['DUT1']} \
108 | | ... | \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \| bd-04 \
109 | | ... | \| ${{split_horizon_group:2, bvi:False}} \|
110 | | [Arguments] | ${node} | ${interface1} | ${interface2} | ${bd_name}
111 | | ... | ${settings}
112 | | interfaceAPI.Add bridge domain to interface
113 | | ... | ${node} | ${interface1} | ${bd_name} | &{settings}
114 | | interfaceAPI.Add bridge domain to interface
115 | | ... | ${node} | ${interface2} | ${bd_name} | &{settings}
117 | Honeycomb should show interfaces assigned to bridge domain
118 | | [Documentation] | Uses Honeycomb API to verify interface assignment to\
119 | | ... | bridge domain.
121 | | ... | *Arguments:*
122 | | ... | - node - Information about a DUT node. Type: dictionary
123 | | ... | - interface1, interface2 - Names of interfaces to assign to bridge\
124 | | ... | domain. Type: string
125 | | ... | - bd_name - Name of the bridge domain. Type: string
126 | | ... | - settings - Bridge domain specific interface settings.\
127 | | ... | Type: dictionary
131 | | ... | \| Honeycomb should show interfaces assigned to bridge domain \
132 | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \
133 | | ... | \| bd-04 \| ${{split_horizon_group:2, bvi:False}} \|
134 | | [Arguments] | ${node} | ${interface1} | ${interface2} | ${bd_name}
135 | | ... | ${settings}
136 | | ${if1_data}= | interfaceAPI.Get interface oper data
137 | | ... | ${node} | ${interface1}
138 | | ${if2_data}= | interfaceAPI.Get interface oper data
139 | | ... | ${node} | ${interface2}
140 | | Should be equal | ${if1_data['v3po:l2']['bridge-domain']}
141 | | ... | ${if2_data['v3po:l2']['bridge-domain']} | ${bd_name}
142 | | Should be equal | ${if1_data['v3po:l2']['split-horizon-group']}
143 | | ... | ${if2_data['v3po:l2']['split-horizon-group']}
144 | | ... | ${settings['split_horizon_group']}
145 | | Should be equal | ${if1_data['v3po:l2']['bridged-virtual-interface']}
146 | | ... | ${if2_data['v3po:l2']['bridged-virtual-interface']}
147 | | ... | ${settings['bvi']}
149 | VAT should show interfaces assigned to bridge domain
150 | | [Documentation] | Uses VAT to verify interface assignment to\
151 | | ... | bridge domain.
153 | | ... | *Arguments:*
154 | | ... | - node - Information about a DUT node. Type: dictionary
155 | | ... | - index - Index of bridge domains on VPP node. Starts from 0,\
156 | | ... | new BDs reuse numbers after a bridge domain is removed. Type: int
157 | | ... | - interface1, interface2 - Names of interfaces to assign to bridge\
158 | | ... | domain. Type: string
159 | | ... | - settings - Bridge domain specific interface settings.\
160 | | ... | Type: dictionary
164 | | ... | \| VAT should show interfaces assigned to bridge domain \
165 | | ... | \| ${nodes['DUT1']} \| ${4} \| GigabitEthernet0/8/0 \
166 | | ... | \| GigabitEthernet0/9/0 \| ${{split_horizon_group:2, bvi:False}} \|
167 | | [Arguments] | ${node} | ${index} | ${interface1} | ${interface2}
168 | | ... | ${settings}
169 | | ${if1_index}= | Get interface sw index | ${node} | ${interface1}
170 | | ${if2_index}= | Get interface sw index | ${node} | ${interface2}
171 | | ${if_indices}= | Create list | ${if1_index} | ${if2_index}
172 | | ${bd_data}= | VPP get bridge domain data | ${node}
173 | | ${bd_interfaces}= | Set Variable | ${bd_data[${index}]['sw_if']}
174 | | @{bd_interfaces}= | Create List | ${bd_interfaces[0]} | ${bd_interfaces[1]}
175 | | :FOR | ${interface} | IN | @{bd_interfaces}
176 | | | Should contain | ${if_indices} | ${interface['sw_if_index']}
177 | | | Should be equal | ${interface['shg']} | ${settings['split_horizon_group']}
179 | Honeycomb removes all bridge domains
180 | | [Documentation] | Uses Honeycomb API to remove all bridge domains from the \
183 | | ... | *Arguments:*
184 | | ... | - node - Information about a DUT node. Type: dictionary
188 | | ... | \| Honeycomb removes all bridge domains \| ${nodes['DUT1']} \|
189 | | [Arguments] | ${node}
190 | | Remove all bds | ${node}
192 | Honeycomb should show no bridge domains
193 | | [Documentation] | Uses Honeycomb API to verify the removal of all\
194 | | ... | bridge domains.
196 | | ... | *Arguments:*
197 | | ... | - node - Information about a DUT node. Type: dictionary
201 | | ... | \| Honeycomb should show no bridge domains \| ${nodes['DUT1']} \|
202 | | [Arguments] | ${node}
203 | | ${bd_data}= | Get all BDs oper data | ${node}
204 | | Should be empty | ${bd_data}
206 | VAT should show no bridge domains
207 | | [Documentation] | Uses VAT to verify the removal of all bridge domains.
209 | | ... | *Arguments:*
210 | | ... | - node - Information about a DUT node. Type: dictionary
214 | | ... | \| VAT should show no bridge domains \| ${nodes['DUT1']} \|
215 | | [Arguments] | ${node}
216 | | Run Keyword And Expect Error | ValueError: No JSON object could be decoded
217 | | ... | VPP get bridge domain data | ${node}
219 | Honeycomb adds interface to bridge domain
220 | | [Documentation] | Uses Honeycomb API to assign interface to a bridge\
223 | | ... | *Arguments:*
224 | | ... | - node - Information about a DUT node. Type: dictionary
225 | | ... | - interface - Name of interface to assign to bridge domain.\
226 | | ... | Type: string
227 | | ... | - bd_name - Name of the bridge domain. Type: string
228 | | ... | - settings - Bridge domain specific interface settings.\
229 | | ... | Type: dictionary
233 | | ... | \| Honeycomb adds interfaces to bridge domain \| ${nodes['DUT1']} \
234 | | ... | \| GigabitEthernet0/8/0 \| bd-04 \
235 | | ... | \| ${{split_horizon_group:2, bvi:False}} \|
237 | | [Arguments] | ${node} | ${interface} | ${bd_name} | ${settings}
239 | | interfaceAPI.Add bridge domain to interface
240 | | ... | ${node} | ${interface} | ${settings['bridge-domain']}
241 | | ... | ${settings['split-horizon-group']}
242 | | ... | ${settings['bridged-virtual-interface']}
244 | Bridge domain configuration in interface operational data should be empty
245 | | [Documentation] | Get interface operational data and retrieve bridge
246 | | ... | domain configuration from it. It should be empty.
248 | | ... | *Arguments:*
249 | | ... | - node - Information about a DUT node. Type: dictionary
250 | | ... | - interface - Name of interface where the bridge domain parameters \
251 | | ... | will be checked.Type: string
254 | | ... | \| Bridge domain configuration in interface operational data should \
255 | | ... | be empty \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
257 | | [Arguments] | ${node} | ${interface}
259 | | ${if_data}= | interfaceAPI.Get BD Oper Data From Interface
260 | | ... | ${node} | ${interface}
261 | | Should be empty | ${if_data}
263 | Bridge domain configuration in interface operational data should be
264 | | [Documentation] | Get interface operational data and retrieve bridge
265 | | ... | domain configuration from it. Compare the data to the expected one.
267 | | ... | *Arguments:*
268 | | ... | - node - Information about a DUT node. Type: dictionary
269 | | ... | - interface - Name of interface where the bridge domain parameters \
270 | | ... | will be checked. Type: string
271 | | ... | - bd_settings - The referential bridge domain data. Type: dictionary
274 | | ... | \| Bridge domain configuration in interface operational data should \
275 | | ... | be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${if_bd_settings} \|
277 | | [Arguments] | ${node} | ${interface} | ${bd_settings}
279 | | ${if_data}= | interfaceAPI.Get BD Oper Data From Interface
280 | | ... | ${node} | ${interface}
281 | | interfaceAPI.Compare Data Structures | ${if_data} | ${bd_settings}
283 | VAT removes bridge domain
284 | | [Documentation] Remove the specified bridge domain using VAT.
286 | | ... | *Arguments:*
287 | | ... | - node - Information about a DUT node. Type: dictionary
288 | | ... | - bd_id - Bridge domain ID. Type: integer
291 | | ... | \| VAT removes bridge domain \
292 | | ... | \| ${nodes['DUT1']} \| 1 \|
294 | | [Arguments] | ${node} | ${bd_id}
296 | | Delete Bridge Domain VAT | ${node} | ${bd_id}