1 # Copyright (c) 2016 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
15 | Resource | resources/libraries/robot/interfaces.robot
16 | Library | resources.libraries.python.NodePath
17 | Library | resources.libraries.python.LispSetup.LispStatus
18 | Library | resources.libraries.python.LispSetup.LispSetup
19 | Library | resources.libraries.python.LispUtil
23 | Lisp locator_set data is prepared
24 | | [Documentation] | Generate lisp locator_set data for test
25 | | ... | the lisp locator_set and locator API.
27 | | ... | *Arguments:*
28 | | ... | - dut_node - DUT node. Type: dictionary
29 | | ... | - locator_set_number - Number how many locator_set data
30 | | ... | will be generated. Type: integer
33 | | ... | - No value returned
35 | | ... | _NOTE:_ This KW sets following test case variables:
36 | | ... | - locator_set_values - New generated locator_set data.
39 | | ... | \| Given Lisp locator_set data is prepared \| ${nodes['DUT1']} \
40 | | ... | \| ${locator_set_number} \|
42 | | [Arguments] | ${dut_node} | ${locator_set_number}
43 | | ${locator_set_values}= | Generate Unique Lisp Locator Set Data |
44 | | ... | ${dut_node} | ${locator_set_number}
45 | | Set Test Variable | ${locator_set_values}
47 | Lisp locator_set data is set
48 | | [Documentation] | Set the lisp locator_set and locator on the VPP node.
50 | | ... | *Arguments:*
51 | | ... | - dut_node - DUT node. Type: dictionary
54 | | ... | - No value returned
56 | | ... | _NOTE:_ This KW requires following test case variables:
57 | | ... | - locator_set_values - Generated locator_set data from
58 | | ... | KW locator_set data is prepared,
59 | | ... | which will be set on the VPP node.
62 | | ... | \| When Lisp locator_set data is set \| ${nodes['DUT1']} \|
64 | | [Arguments] | ${dut_node}
65 | | Vpp Set Lisp Locator Set | ${dut_node} | ${locator_set_values}
67 | Lisp locator_set is set correctly
68 | | [Documentation] | Test if the locator_set is set correctly on the VPP node.
70 | | ... | *Arguments:*
71 | | ... | - dut_node - DUT node. Type: dictionary
74 | | ... | - No value returned
76 | | ... | _NOTE:_ This KW requires following test case variables:
77 | | ... | - locator_set_values - Generated locator_set data from
78 | | ... | KW locator_set data is prepared,
79 | | ... | which were set to VPP node.
82 | | ... | \| Then Lisp locator_set is set correctly \| ${nodes['DUT1']} \|
84 | | [Arguments] | ${dut_node}
85 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node}
86 | | Lisp Locator S Should Be Equal
87 | | ... | ${locator_set_values} | ${show_locator_set}
89 | Delete all lisp locator_set from VPP
90 | | [Documentation] | Delete all lisp locator_set on the VPP node.
92 | | ... | *Arguments:*
93 | | ... | - dut_node - DUT node. Type: dictionary
96 | | ... | - No value returned
98 | | ... | _NOTE:_ This KW requires following test case variables:
99 | | ... | - locator_set_values - Generated locator_set data from
100 | | ... | KW locator_set data is prepared,
101 | | ... | which was set on the VPP node.
104 | | ... | \| When Delete all lisp locator_set from VPP \
105 | | ... | \| ${nodes['DUT1']} \|
107 | | [Arguments] | ${dut_node}
108 | | Vpp Unset Lisp Locator Set | ${dut_node} | ${locator_set_values}
110 | Lisp locator_set should be unset
111 | | [Documentation] | Test if all locator_set are unset from VPP node.
113 | | ... | *Arguments:*
114 | | ... | - dut_node - DUT node. Type: dictionary
117 | | ... | - No value returned
120 | | ... | \| Then Lisp locator_set should be unset \| ${nodes['DUT1']} \|
122 | | [Arguments] | ${dut_node}
123 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node}
124 | | Lisp Is Empty | ${show_locator_set}
126 | Lisp locator_set data use for test reset locator_set are prepared
127 | | [Documentation] | Generate lisp special type of locator_set data.
128 | | ... | This data will be use for test reset locator_set.
130 | | ... | *Arguments:*
131 | | ... | - dut_node - DUT node. Type: dictionary
132 | | ... | - locator_set_number - Number how many locator_set data
133 | | ... | it will generate. Type: integer
136 | | ... | - No value returned
138 | | ... | _NOTE:_ This KW sets following test case variables:
139 | | ... | - locator_set_values - New generate locator_set data.
142 | | ... | \| Given Lisp locator_set data use for test reset locator_set \
143 | | ... | are prepared \| ${nodes['DUT1']} \| ${locator_set_number} \|
145 | | [Arguments] | ${dut_node} | ${locator_set_number}
146 | | ${locator_set_values}= | Generate Duplicate Lisp Locator Set Data |
147 | | ... | ${dut_node} | ${locator_set_number}
148 | | Set Test Variable | ${locator_set_values}
150 | Lisp eid address is set
151 | | [Documentation] | Set the lisp eid address on the VPP node.
153 | | ... | *Arguments:*
154 | | ... | - dut_node - DUT node. Type: dictionary
155 | | ... | - set_eid - Test eid data. Type: list
158 | | ... | - No value returned
161 | | ... | \| When Lisp eid address is set \| ${nodes['DUT1']} \| ${eid_table} |\
163 | | [Arguments] | ${dut_node} | ${set_eid}
164 | | Vpp Set Lisp Eid Table | ${dut_node} | ${set_eid}
166 | Lisp eid address is set correctly to eid table
167 | | [Documentation] | Test if the locator_set is set correctly on the VPP node.
169 | | ... | *Arguments:*
170 | | ... | - dut_node - DUT node. Type: dictionary
171 | | ... | - set_eid - Example eid data, which was set to the VPP node.
175 | | ... | - No value returned
177 | | ... | _NOTE:_ This KW requires following test case variables:
178 | | ... | - set_eid - Generated eid data, which will be set to the VPP node.
181 | | ... | \| Then Lisp eid address is set correctly to eid table \
182 | | ... | \| ${nodes['DUT1']} \| ${eid_table} \|
184 | | [Arguments] | ${dut_node} | ${set_eid}
185 | | ${show_eid}= | Vpp Show Lisp Eid Table | ${dut_node}
186 | | Lisp Should Be Equal | ${set_eid} | ${show_eid}
188 | Delete all lisp eid address from VPP
189 | | [Documentation] | Delete all lisp eid address from the VPP node.
191 | | ... | *Arguments:*
192 | | ... | - dut_node - DUT node. Type: dictionary
193 | | ... | - set_eid - Eid data which will be removed from the VPP node.
197 | | ... | - No value returned
200 | | ... | \| When Delete all lisp eid address from VPP \
201 | | ... | \| ${nodes['DUT1']} \| ${eid_table} \|
203 | | [Arguments] | ${dut_node} | ${set_eid}
204 | | Vpp Unset Lisp Eid Table | ${dut_node} | ${set_eid}
206 | Lisp eid table should be empty
207 | | [Documentation] | Test if the eid table is empty.
209 | | ... | *Arguments:*
210 | | ... | - dut_node - DUT node. Type: dictionary
213 | | ... | - No value returned
216 | | ... | \| Then Lisp eid table should be empty \| ${nodes['DUT1']} \|
218 | | [Arguments] | ${dut_node}
219 | | ${show_eid}= | Vpp Show Lisp Eid Table | ${dut_node}
220 | | Lisp Is Empty | ${show_eid}
222 | Lisp map resolver address is set
223 | | [Documentation] | Set the lisp map resolver address in the VPP node.
225 | | ... | *Arguments:*
226 | | ... | - dut_node - DUT node. Type: dictionary
227 | | ... | - set_map_resolver - Map resolver data, which will be set on
228 | | ... | the VPP node. Type: list
231 | | ... | - No value returned
234 | | ... | \| When Lisp map resolver address is set \| ${nodes['DUT1']} \
235 | | ... | \| ${map_resolver} \|
237 | | [Arguments] | ${dut_node} | ${set_map_resolver}
238 | | Vpp Set Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
240 | Lisp map resolver address is set correctly
241 | | [Documentation] | Test if the map resolver address is set correctly
242 | | ... | on the VPP node.
244 | | ... | *Arguments:*
245 | | ... | - dut_node - DUT node. Type: dictionary
246 | | ... | - set_map_resolver - Map resolver data, which was set on
247 | | ... | the VPP node. Type: list
250 | | ... | - No value returned
253 | | ... | \| Then Lisp map resolver address is set correctly \
254 | | ... | \| ${nodes['DUT1']} \| ${map_resolver} \|
256 | | [Arguments] | ${dut_node} | ${set_map_resolver}
257 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
258 | | Lisp Should Be Equal | ${set_map_resolver} | ${show_map_resolver}
260 | Delete all lisp map resolver address from VPP
261 | | [Documentation] | Delete all lisp map resolver address on the VPP node.
263 | | ... | *Arguments:*
264 | | ... | - dut_node - DUT node. Type: dictionary
265 | | ... | - map_resolver - Map resolver data, which will be remove from
266 | | ... | the VPP. Type: list
269 | | ... | - No value returned
272 | | ... | \| When Delete all lisp map resolver address from VPP \
273 | | ... | \| ${nodes['DUT1']} \| ${map_resolver} \|
275 | | [Arguments] | ${dut_node} | ${set_map_resolver}
276 | | Vpp Unset Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
278 | Lip map resolver address should be empty
279 | | [Documentation] | Test if the map resolver are empty.
281 | | ... | *Arguments:*
282 | | ... | - dut_node - DUT node. Type: dictionary
285 | | ... | - No value returned
288 | | ... | \| Then Lip map resolver address should be empty \
289 | | ... | \| ${nodes['DUT1']} \|
291 | | [Arguments] | ${dut_node}
292 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
293 | | Lisp Is Empty | ${show_map_resolver}
296 | | [Documentation] | Enable lisp on VPP node.
298 | | ... | *Arguments:*
299 | | ... | - dut_node - DUT node. Type: dictionary
302 | | ... | - No value returned
305 | | ... | \| Enable lisp \| ${nodes['DUT1']} \|
307 | | [Arguments] | ${dut_node}
308 | | Vpp Lisp Enable Disable | ${dut_node} | enable
310 | Check if lisp is enabled
311 | | [Documentation] | Check if the lisp is enabled.
313 | | ... | *Arguments:*
314 | | ... | - dut_node - DUT node. Type: dictionary
315 | | ... | - lisp_status_data - Lisp status data, which was set on
316 | | ... | the VPP node. Type: list
319 | | ... | - No value returned
322 | | ... | \| Check if lisp is enabled \| ${nodes['DUT1']} \
323 | | ... | \| ${lisp_status_data} \|
325 | | [Arguments] | ${dut_node} | ${lisp_status_data}
326 | | ${show_lisp_stat}= | Vpp Show Lisp State | ${dut_node}
327 | | Lisp Should Be Equal | ${show_lisp_stat} | ${lisp_status_data[1]}
330 | | [Documentation] | Disable lisp on VPP node.
332 | | ... | *Arguments:*
333 | | ... | - dut_node - DUT node. Type: dictionary
336 | | ... | - No value returned
339 | | ... | \| Disable lisp \| ${nodes['DUT1']} \|
341 | | [Arguments] | ${dut_node}
342 | | Vpp Lisp Enable Disable | ${dut_node} | disable
344 | Check if lisp is disabled
345 | | [Documentation] | Check if lisp is disabled.
347 | | ... | *Arguments:*
348 | | ... | - dut_node - DUT node. Type: dictionary
349 | | ... | - lisp_status_data - Lisp status data, which was set on
350 | | ... | the VPP node. Type: list
353 | | ... | - No value returned
356 | | ... | \| Check if lisp is disabled \| ${nodes['DUT1']} \
357 | | ... | \| ${lisp_status_data} \|
359 | | [Arguments] | ${dut_node} | ${lisp_status_data}
360 | | ${show_lisp_stat}= | Vpp Show Lisp State | ${dut_node}
361 | | Lisp Should Be Equal | ${show_lisp_stat} | ${lisp_status_data[0]}