1 # Copyright (c) 2016 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
15 | Resource | resources/libraries/robot/default.robot
16 | Resource | resources/libraries/robot/counters.robot
17 | Library | resources.libraries.python.NodePath
18 | Library | resources.libraries.python.LispSetup.LispSetup
19 | Library | resources.libraries.python.LispUtil
23 | Lisp locator_set data is prepared
24 | | [Documentation] | Generate lisp locator_set data for test
25 | | ... | the lisp locator_set and locator API.
27 | | ... | *Arguments:*
28 | | ... | - ${dut_node} - DUT node. Type: dictionary
29 | | ... | - ${locator_set_number} - Number how many locator_set data
30 | | ... | will be generated. Type: integer
33 | | ... | - No value returned
35 | | ... | _NOTE:_ This KW sets following test case variables:
36 | | ... | - ${locator_set_values} - New generated locator_set data.
39 | | ... | \| Given Lisp locator_set data is prepared \| ${nodes['DUT1']} \
40 | | ... | \| ${locator_set_number} \|
42 | | [Arguments] | ${dut_node} | ${locator_set_number}
43 | | ${locator_set_values}= | Generate Lisp Locator Set Data |
44 | | ... | ${dut_node} | ${locator_set_number}
45 | | Set Test Variable | ${locator_set_values}
47 | Lisp locator_set data is set
48 | | [Documentation] | Set the lisp locator_set and locator on the VPP node.
50 | | ... | *Arguments:*
51 | | ... | - ${dut_node} - DUT node. Type: dictionary
54 | | ... | - No value returned
56 | | ... | _NOTE:_ This KW requires following test case variables:
57 | | ... | - ${locator_set_values} - Generated locator_set data from
58 | | ... | KW locator_set data is prepared,
59 | | ... | which will be set on the VPP node.
62 | | ... | \| When Lisp locator_set data is set \| ${nodes['DUT1']} \|
64 | | [Arguments] | ${dut_node}
65 | | Vpp Set Lisp Locator Set | ${dut_node} | ${locator_set_values}
67 | Lisp locator_set is set correct
68 | | [Documentation] | Test if the locator_set is set correct on the VPP node.
70 | | ... | *Arguments:*
71 | | ... | - ${dut_node} - DUT node. Type: dictionary
74 | | ... | - No value returned
76 | | ... | _NOTE:_ This KW requires following test case variables:
77 | | ... | - ${locator_set_values} - Generated locator_set data from
78 | | ... | KW locator_set data is prepared,
79 | | ... | which were set to VPP node.
82 | | ... | \| Then Lisp locator_set is set correct \| ${nodes['DUT1']} \|
84 | | [Arguments] | ${dut_node}
85 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node}
86 | | Lisp Locator S Should Be Equal
87 | | ... | ${locator_set_values} | ${show_locator_set}
89 | Delete all lisp locator_set from VPP
90 | | [Documentation] | Delete all lisp locator_set on the VPP node.
92 | | ... | *Arguments:*
93 | | ... | - ${dut_node} - DUT node. Type: dictionary
96 | | ... | - No value returned
98 | | ... | _NOTE:_ This KW requires following test case variables:
99 | | ... | - ${locator_set_values} - Generated locator_set data from
100 | | ... | KW locator_set data is prepared,
101 | | ... | which was set on the VPP node.
104 | | ... | \| When Delete all lisp locator_set from VPP \
105 | | ... | \| ${nodes['DUT1']} \|
107 | | [Arguments] | ${dut_node}
108 | | Vpp Unset Lisp Locator Set | ${dut_node} | ${locator_set_values}
110 | Lisp locator_set should be unset
111 | | [Documentation] | Test if all locator_set are unset from VPP node.
113 | | ... | *Arguments:*
114 | | ... | - ${dut_node} - DUT node. Type: dictionary
117 | | ... | - No value returned
120 | | ... | \| Then Lisp locator_set should be unset \| ${nodes['DUT1']} \|
122 | | [Arguments] | ${dut_node}
123 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node}
124 | | Lisp Is Empty | ${show_locator_set}
126 | Lisp locator_set data use for test reset locator_set are prepared
127 | | [Documentation] | Generate lisp special type of locator_set data.
128 | | ... | This data will be use for test reset locator_set.
130 | | ... | *Arguments:*
131 | | ... | - ${dut_node} - DUT node. Type: dictionary
132 | | ... | - ${locator_set_number} - Number how many locator_set data
133 | | ... | it will generate. Type: int
136 | | ... | - No value returned
138 | | ... | _NOTE:_ This KW sets following test case variables:
139 | | ... | - ${locator_set_values} - New generate locator_set data.
142 | | ... | \| Given Lisp locator_set data use for test reset locator_set \
143 | | ... | are prepared \| ${nodes['DUT1']} \| ${locator_set_number} \|
145 | | [Arguments] | ${dut_node} | ${locator_set_number}
146 | | ${locator_set_values}= | Generate Lisp Locator Set Reset Data |
147 | | ... | ${dut_node} | ${locator_set_number}
148 | | Set Test Variable | ${locator_set_values}
150 | Lisp eid address is prepared
151 | | [Documentation] | Generate lisp eid address for testing lisp eid API.
153 | | ... | *Arguments:*
154 | | ... | - ${dut_node} - DUT node. Type: dictionary
155 | | ... | - ${eid_ipv4_num} - Number of generate ipv4 address. Type: int
156 | | ... | - ${eid_ipv6_num} - Number of generate ipv6 address. Type: int
159 | | ... | - No value returned
161 | | ... | _NOTE:_ This KW sets following test case variables:
162 | | ... | - ${set_eid} - New generate eid data.
165 | | ... | \| Given Lisp eid address is prepared \| ${nodes['DUT1']} \
166 | | ... | \| ${eid_ipv4_num} \| ${eid_ipv6_num} \|
168 | | [Arguments] | ${dut_node} | ${eid_ipv4_num} | ${eid_ipv6_num}
169 | | ${set_eid} = | Generate Lisp Local Eid Data
170 | | ... | ${eid_ipv4_num} | ${eid_ipv6_num}
171 | | Set Test Variable | ${set_eid}
173 | Lisp eid address is set
174 | | [Documentation] | Set the lisp eid address on the VPP node.
176 | | ... | *Arguments:*
177 | | ... | - ${dut_node} - DUT node. Type: dictionary
180 | | ... | - No value returned
182 | | ... | _NOTE:_ This KW requires following test case variables:
183 | | ... | - ${set_eid} - Generated eid data which will be set to VPP.
186 | | ... | \| When Lisp eid address is set \| ${nodes['DUT1']} \|
188 | | [Arguments] | ${dut_node}
189 | | Vpp Set Lisp Eid Table | ${dut_node} | ${set_eid}
191 | Lisp eid address is set correct to eid table
192 | | [Documentation] | Test if the locator_set is set correct on the VPP node.
194 | | ... | *Arguments:*
195 | | ... | - ${dut_node} - DUT node. Type: dictionary
198 | | ... | - No value returned
200 | | ... | _NOTE:_ This KW requires following test case variables:
201 | | ... | - ${set_eid} - Generated eid data which will be set to the VPP node.
204 | | ... | \| Then Lisp eid address is set correct to eid table \
205 | | ... | \| ${nodes['DUT1']} \|
207 | | [Arguments] | ${dut_node}
208 | | ${show_eid}= | Vpp Show Lisp Local Eid Table | ${dut_node}
209 | | Lisp Should Be Equal | ${set_eid} | ${show_eid}
211 | Delete all lisp eid address from VPP
212 | | [Documentation] | Delete all lisp eid address from the VPP node.
214 | | ... | *Arguments:*
215 | | ... | - ${dut_node} - DUT node. Type: dictionary
218 | | ... | - No value returned
220 | | ... | _NOTE:_ This KW requires following test case variables:
221 | | ... | - ${set_eid} - Generated eid data which was set to the VPP node.
224 | | ... | \| When Delete all lisp eid address from VPP \
225 | | ... | \| ${nodes['DUT1']} \|
227 | | [Arguments] | ${dut_node}
228 | | Vpp Unset Lisp Eid Table | ${dut_node} | ${set_eid}
230 | Lisp eid table should be empty
231 | | [Documentation] | Test if the eid table is empty.
233 | | ... | *Arguments:*
234 | | ... | - ${dut_node} - DUT node. Type: dictionary
237 | | ... | - No value returned
240 | | ... | \| Then Lisp eid table should be empty \| ${nodes['DUT1']} \|
242 | | [Arguments] | ${dut_node}
243 | | ${show_eid}= | Vpp Show Lisp Local Eid Table | ${dut_node}
244 | | Lisp Is Empty | ${show_eid}
246 | Lisp map resolver address is prepared
247 | | [Documentation] | Generate map resolver address for testing
248 | | ... | lisp map resolver API.
250 | | ... | *Arguments:*
251 | | ... | - ${dut_node} - DUT node. Type: dictionary
252 | | ... | - ${map_resolver_ipv4_num} - Number of generate ipv4 address.
254 | | ... | - ${map_resolver_ipv6_num} - Number of generate ipv6 address.
258 | | ... | - No value returned
260 | | ... | _NOTE:_ This KW sets following test case variables:
261 | | ... | - ${set_map_resolver} - Generate map resolver data.
264 | | ... | \| Given Lisp map resolver address is prepared \
265 | | ... | \| ${nodes['DUT1']} \| ${map_resolver_ipv4_num} \
266 | | ... | \| ${map_resolver_ipv6_num} \|
268 | | [Arguments] | ${dut_node} | ${map_resolver_ipv4_num} | ${map_resolver_ipv6_num}
269 | | ${set_map_resolver} = | Generate Lisp Map Resolver Data
270 | | ... | ${map_resolver_ipv4_num} | ${map_resolver_ipv6_num}
271 | | Set Test Variable | ${set_map_resolver}
273 | Lisp map resolver address is set
274 | | [Documentation] | Set the lisp map resolver address in the VPP node.
276 | | ... | *Arguments:*
277 | | ... | - ${dut_node} - DUT node. Type: dictionary
280 | | ... | - No value returned
282 | | ... | _NOTE:_ This KW requires following test case variables:
283 | | ... | - ${set_map_resolver} - Map resolver data which will be set
284 | | ... | to the VPP node.
287 | | ... | \| When Lisp map resolver address is set \| ${nodes['DUT1']} \|
289 | | [Arguments] | ${dut_node}
290 | | Vpp Set Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
292 | Lisp map resolver address is set correct
293 | | [Documentation] | Test if the map resolver address is set correct
294 | | ... | on the VPP node.
296 | | ... | *Arguments:*
297 | | ... | - ${dut_node} - DUT node. Type: dictionary
300 | | ... | - No value returned
302 | | ... | _NOTE:_ This KW requires following test case variables:
303 | | ... | - ${set_map_resolver} - Map resolver data which was set
304 | | ... | to the VPP node.
307 | | ... | \| Then Lisp map resolver address is set correct \
308 | | ... | \| ${nodes['DUT1']} \|
310 | | [Arguments] | ${dut_node}
311 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
312 | | Lisp Should Be Equal | ${set_map_resolver} | ${show_map_resolver}
314 | Delete all lisp map resolver address from VPP
315 | | [Documentation] | Delete all lisp map resolver address on the VPP node.
317 | | ... | *Arguments:*
318 | | ... | - ${dut_node} - DUT node. Type: dictionary
321 | | ... | - No value returned
323 | | ... | _NOTE:_ This KW requires following test case variables:
324 | | ... | - ${set_map_resolver} - Map resolver data which was set
325 | | ... | to the VPP node.
328 | | ... | \| When Delete all lisp map resolver address from VPP \
329 | | ... | \| ${nodes['DUT1']} \|
331 | | [Arguments] | ${dut_node}
332 | | Vpp Unset Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
334 | Lip map resolver address should be empty
335 | | [Documentation] | Test if the map resolver are empty.
337 | | ... | *Arguments:*
338 | | ... | - ${dut_node} - DUT node. Type: dictionary
341 | | ... | - No value returned
344 | | ... | \| Then Lip map resolver address should be empty \
345 | | ... | \| ${nodes['DUT1']} \|
347 | | [Arguments] | ${dut_node}
348 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
349 | | Lisp Is Empty | ${show_map_resolver}