1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
15 | Library | resources.libraries.python.DUTSetup
16 | Library | resources.tools.wrk.wrk
17 | Resource | resources/libraries/robot/performance/performance_configuration.robot
18 | Resource | resources/libraries/robot/performance/performance_utils.robot
19 | Resource | resources/libraries/robot/tcp/tcp_setup.robot
20 | Documentation | Performance suite keywords - Suite and test setups and
25 # Keywords used in setups and teardowns
27 | Set variables in 2-node circular topology
29 | | ... | Compute path for testing on two given nodes in circular
30 | | ... | topology and set corresponding suite variables.
32 | | ... | _NOTE:_ This KW sets following suite variables:
33 | | ... | - tg - TG node
34 | | ... | - tg_if1 - 1st TG interface towards DUT.
35 | | ... | - tg_if2 - 2nd TG interface towards DUT.
36 | | ... | - dut1 - DUT1 node
37 | | ... | - dut1_if1 - 1st DUT interface towards TG.
38 | | ... | - dut1_if2 - 2nd DUT interface towards TG.
40 | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
41 | | Compute Path | always_same_link=${FALSE}
42 | | ${tg_if1} | ${tg}= | First Interface
43 | | ${dut1_if1} | ${dut1}= | First Ingress Interface
44 | | ${dut1_if2} | ${dut1}= | Last Egress Interface
45 | | ${tg_if2} | ${tg}= | Last Interface
46 | | Set Suite Variable | ${tg}
47 | | Set Suite Variable | ${tg_if1}
48 | | Set Suite Variable | ${tg_if2}
49 | | Set Suite Variable | ${dut1}
50 | | Set Suite Variable | ${dut1_if1}
51 | | Set Suite Variable | ${dut1_if2}
53 | Set variables in 3-node circular topology
55 | | ... | Compute path for testing on three given nodes in circular
56 | | ... | topology and set corresponding suite variables.
58 | | ... | _NOTE:_ This KW sets following suite variables:
59 | | ... | - tg - TG node
60 | | ... | - tg_if1 - TG interface towards DUT1.
61 | | ... | - tg_if2 - TG interface towards DUT2.
62 | | ... | - dut1 - DUT1 node
63 | | ... | - dut1_if1 - DUT1 interface towards TG.
64 | | ... | - dut1_if2 - DUT1 interface towards DUT2.
65 | | ... | - dut2 - DUT2 node
66 | | ... | - dut2_if1 - DUT2 interface towards DUT1.
67 | | ... | - dut2_if2 - DUT2 interface towards TG.
69 | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
70 | | ... | ${nodes['TG']}
72 | | ${tg_if1} | ${tg}= | Next Interface
73 | | ${dut1_if1} | ${dut1}= | Next Interface
74 | | ${dut1_if2} | ${dut1}= | Next Interface
75 | | ${dut2_if1} | ${dut2}= | Next Interface
76 | | ${dut2_if2} | ${dut2}= | Next Interface
77 | | ${tg_if2} | ${tg}= | Next Interface
78 | | Set Suite Variable | ${tg}
79 | | Set Suite Variable | ${tg_if1}
80 | | Set Suite Variable | ${tg_if2}
81 | | Set Suite Variable | ${dut1}
82 | | Set Suite Variable | ${dut1_if1}
83 | | Set Suite Variable | ${dut1_if2}
84 | | Set Suite Variable | ${dut2}
85 | | Set Suite Variable | ${dut2_if1}
86 | | Set Suite Variable | ${dut2_if2}
88 | Set variables in 2-node circular topology with DUT interface model
90 | | ... | Compute path for testing on two given nodes in circular topology
91 | | ... | based on interface model provided as an argument and set
92 | | ... | corresponding suite variables.
94 | | ... | *Arguments:*
95 | | ... | - iface_model - Interface model. Type: string
97 | | ... | _NOTE:_ This KW sets following suite variables:
98 | | ... | - tg - TG node
99 | | ... | - tg_if1 - 1st TG interface towards DUT.
100 | | ... | - tg_if2 - 2nd TG interface towards DUT.
101 | | ... | - dut1 - DUT1 node
102 | | ... | - dut1_if1 - 1st DUT interface towards TG.
103 | | ... | - dut1_if2 - 2nd DUT interface towards TG.
107 | | ... | \| Set variables in 2-node circular topology with DUT interface model\
108 | | ... | \| Intel-X520-DA2 \|
110 | | [Arguments] | ${iface_model}
112 | | ${iface_model_list}= | Create list | ${iface_model}
113 | | Append Node | ${nodes['TG']}
114 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
115 | | Append Node | ${nodes['TG']}
116 | | Compute Path | always_same_link=${FALSE}
117 | | ${tg_if1} | ${tg}= | First Interface
118 | | ${dut1_if1} | ${dut1}= | First Ingress Interface
119 | | ${dut1_if2} | ${dut1}= | Last Egress Interface
120 | | ${tg_if2} | ${tg}= | Last Interface
121 | | Set Suite Variable | ${tg}
122 | | Set Suite Variable | ${tg_if1}
123 | | Set Suite Variable | ${tg_if2}
124 | | Set Suite Variable | ${dut1}
125 | | Set Suite Variable | ${dut1_if1}
126 | | Set Suite Variable | ${dut1_if2}
128 | Set variables in 3-node circular topology with DUT interface model
130 | | ... | Compute path for testing on three given nodes in circular topology
131 | | ... | based on interface model provided as an argument and set
132 | | ... | corresponding suite variables.
134 | | ... | *Arguments:*
135 | | ... | - iface_model - Interface model. Type: string
137 | | ... | _NOTE:_ This KW sets following suite variables:
138 | | ... | - tg - TG node
139 | | ... | - tg_if1 - TG interface towards DUT1.
140 | | ... | - tg_if2 - TG interface towards DUT2.
141 | | ... | - dut1 - DUT1 node
142 | | ... | - dut1_if1 - DUT1 interface towards TG.
143 | | ... | - dut1_if2 - DUT1 interface towards DUT2.
144 | | ... | - dut2 - DUT2 node
145 | | ... | - dut2_if1 - DUT2 interface towards DUT1.
146 | | ... | - dut2_if2 - DUT2 interface towards TG.
150 | | ... | \| Set variables in 3-node circular topology with DUT interface model\
151 | | ... | \| Intel-X520-DA2 \|
153 | | [Arguments] | ${iface_model}
155 | | ${iface_model_list}= | Create list | ${iface_model}
156 | | Append Node | ${nodes['TG']}
157 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
158 | | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
159 | | Append Node | ${nodes['TG']}
161 | | ${tg_if1} | ${tg}= | Next Interface
162 | | ${dut1_if1} | ${dut1}= | Next Interface
163 | | ${dut1_if2} | ${dut1}= | Next Interface
164 | | ${dut2_if1} | ${dut2}= | Next Interface
165 | | ${dut2_if2} | ${dut2}= | Next Interface
166 | | ${tg_if2} | ${tg}= | Next Interface
167 | | Set Suite Variable | ${tg}
168 | | Set Suite Variable | ${tg_if1}
169 | | Set Suite Variable | ${tg_if2}
170 | | Set Suite Variable | ${dut1}
171 | | Set Suite Variable | ${dut1_if1}
172 | | Set Suite Variable | ${dut1_if2}
173 | | Set Suite Variable | ${dut2}
174 | | Set Suite Variable | ${dut2_if1}
175 | | Set Suite Variable | ${dut2_if2}
177 | Set variables in 3-node circular topology with DUT interface model with double link between DUTs
179 | | ... | Compute path for testing on three given nodes in circular topology
180 | | ... | with double link between DUTs based on interface model provided as an
181 | | ... | argument and set corresponding suite variables.
183 | | ... | *Arguments:*
184 | | ... | - iface_model - Interface model. Type: string
186 | | ... | _NOTE:_ This KW sets following suite variables:
187 | | ... | - tg - TG node
188 | | ... | - tg_if1 - TG interface towards DUT1.
189 | | ... | - tg_if2 - TG interface towards DUT2.
190 | | ... | - dut1 - DUT1 node
191 | | ... | - dut1_if1 - DUT1 interface towards TG.
192 | | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2.
193 | | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2.
194 | | ... | - dut2 - DUT2 node
195 | | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1.
196 | | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1.
197 | | ... | - dut2_if2 - DUT2 interface towards TG.
201 | | ... | \| Set variables in 3-node circular topology with DUT interface model\
202 | | ... | with double link between DUTs \| Intel-X520-DA2 \|
204 | | [Arguments] | ${iface_model}
206 | | ${iface_model_list}= | Create list | ${iface_model}
207 | | # Compute path TG - DUT1 with single link in between
208 | | Append Node | ${nodes['TG']}
209 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
210 | | Append Node | ${nodes['TG']}
212 | | ${tg_if1} | ${tg}= | Next Interface
213 | | ${dut1_if1} | ${dut1}= | Next Interface
214 | | # Compute path TG - DUT2 with single link in between
216 | | Append Node | ${nodes['TG']}
217 | | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
218 | | Append Node | ${nodes['TG']}
220 | | ${tg_if2} | ${tg}= | Next Interface
221 | | ${dut2_if2} | ${dut2}= | Next Interface
222 | | # Compute path DUT1 - DUT2 with double link in between
224 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
225 | | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
226 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
227 | | Compute Path | always_same_link=${FALSE}
228 | | ${dut1_if2_1} | ${dut1}= | First Interface
229 | | ${dut1_if2_2} | ${dut1}= | Last Interface
230 | | ${dut2_if1_1} | ${dut2}= | First Ingress Interface
231 | | ${dut2_if1_2} | ${dut2}= | Last Egress Interface
232 | | # Set suite variables
233 | | Set Suite Variable | ${tg}
234 | | Set Suite Variable | ${tg_if1}
235 | | Set Suite Variable | ${tg_if2}
236 | | Set Suite Variable | ${dut1}
237 | | Set Suite Variable | ${dut1_if1}
238 | | Set Suite Variable | ${dut1_if2_1}
239 | | Set Suite Variable | ${dut1_if2_2}
240 | | Set Suite Variable | ${dut2}
241 | | Set Suite Variable | ${dut2_if1_1}
242 | | Set Suite Variable | ${dut2_if1_2}
243 | | Set Suite Variable | ${dut2_if2}
245 | Tear down guest VM with dpdk-testpmd
247 | | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}.
248 | | ... | Argument is dictionary of all qemu nodes running with its names.
249 | | ... | Dpdk-testpmd is stopped gracefully with printing stats.
251 | | ... | *Arguments:*
252 | | ... | - dut_node - Node where to clean qemu. Type: dictionary
253 | | ... | - dut_vm_refs - VM references on node. Type: dictionary
257 | | ... | \| Tear down guest VM with dpdk-testpmd \| ${node['DUT1']} \
258 | | ... | \| ${dut_vm_refs} \|
260 | | [Arguments] | ${dut_node} | ${dut_vm_refs}
261 | | ${vms_number}= | Get Length | ${dut_vm_refs}
262 | | ${index}= | Set Variable | ${0}
263 | | :FOR | ${vm_name} | IN | @{dut_vm_refs}
264 | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
265 | | | ${index}= | Evaluate | ${index} + 1
266 | | | Dpdk Testpmd Stop | ${vm}
267 | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
268 | | | Run Keyword | ${vm_name}.Qemu Clear Socks
269 | | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All
273 | | ... | Stop all qemu processes running on ${dut_node}.
274 | | ... | Argument is dictionary of all qemu nodes running with its names.
276 | | ... | *Arguments:*
277 | | ... | - dut_node - Node where to clean qemu. Type: dictionary
278 | | ... | - dut_vm_refs - VM references on node. Type: dictionary
282 | | ... | \| Tear down guest VM \| ${node['DUT1']} \
283 | | ... | \| ${dut_vm_refs} \|
285 | | [Arguments] | ${dut_node} | ${dut_vm_refs}
286 | | ${vms_number}= | Get Length | ${dut_vm_refs}
287 | | ${index}= | Set Variable | ${0}
288 | | :FOR | ${vm_name} | IN | @{dut_vm_refs}
289 | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
290 | | | ${index}= | Evaluate | ${index} + 1
291 | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
292 | | | Run Keyword | ${vm_name}.Qemu Clear Socks
293 | | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All
297 | Set up 2-node performance topology with DUT's NIC model
299 | | ... | Suite preparation phase that sets the default startup configuration of
300 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
301 | | ... | variables used in test cases based on interface model provided as an
302 | | ... | argument. Initializes traffic generator.
304 | | ... | *Arguments:*
305 | | ... | - topology_type - Topology type. Type: string
306 | | ... | - nic_model - Interface model. Type: string
310 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
312 | | [Arguments] | ${topology_type} | ${nic_model}
314 | | Set variables in 2-node circular topology with DUT interface model
315 | | ... | ${nic_model}
316 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
317 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
319 | Set up 2-node-switched performance topology with DUT's NIC model
321 | | ... | Suite preparation phase that sets the default startup configuration of
322 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
323 | | ... | variables used in test cases based on interface model provided as an
324 | | ... | argument. Initializes traffic generator.
326 | | ... | *Arguments:*
327 | | ... | - topology_type - Topology type. Type: string
328 | | ... | - nic_model - Interface model. Type: string
329 | | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string
330 | | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string
334 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \
335 | | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \|
337 | | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac}
338 | | ... | ${tg_if2_dest_mac}
340 | | Set variables in 2-node circular topology with DUT interface model
341 | | ... | ${nic_model}
342 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
343 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
344 | | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac}
346 | Set up 3-node performance topology with DUT's NIC model
348 | | ... | Suite preparation phase that sets the default startup configuration of
349 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
350 | | ... | variables used in test cases based on interface model provided as an
351 | | ... | argument. Initializes traffic generator.
353 | | ... | *Arguments:*
354 | | ... | - topology_type - Topology type. Type: string
355 | | ... | - nic_model - Interface model. Type: string
359 | | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \
360 | | ... | \| Intel-X520-DA2 \|
362 | | [Arguments] | ${topology_type} | ${nic_model}
364 | | Set variables in 3-node circular topology with DUT interface model
365 | | ... | ${nic_model}
366 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
367 | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
369 | Set up 3-node performance topology with DUT's NIC model with double link between DUTs
371 | | ... | Suite preparation phase that sets the default startup configuration of
372 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
373 | | ... | variables used in test cases based on interface model provided as an
374 | | ... | argument. Initializes traffic generator.
376 | | ... | *Arguments:*
377 | | ... | - topology_type - Topology type. Type: string
378 | | ... | - nic_model - Interface model. Type: string
382 | | ... | \| Set up 3-node performance topology with DUT's NIC model with \
383 | | ... | double link between DUTs \| L2 \| Intel-X520-DA2 \|
385 | | [Arguments] | ${topology_type} | ${nic_model}
387 | | Set variables in 3-node circular topology with DUT interface model with double link between DUTs
388 | | ... | ${nic_model}
389 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
390 | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
392 | Set up DPDK 2-node performance topology with DUT's NIC model
394 | | ... | Updates interfaces on all nodes and sets the global
395 | | ... | variables used in test cases based on interface model provided as an
396 | | ... | argument. Initializes traffic generator. Initializes DPDK test
397 | | ... | environment.
399 | | ... | *Arguments:*
400 | | ... | - topology_type - Topology type. Type: string
401 | | ... | - nic_model - Interface model. Type: string
405 | | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \
406 | | ... | \| L2 \| Intel-X520-DA2 \|
408 | | [Arguments] | ${topology_type} | ${nic_model}
410 | | Set variables in 2-node circular topology with DUT interface model
411 | | ... | ${nic_model}
412 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
413 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
414 | | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
416 | Set up DPDK 3-node performance topology with DUT's NIC model
418 | | ... | Updates interfaces on all nodes and sets the global
419 | | ... | variables used in test cases based on interface model provided as an
420 | | ... | argument. Initializes traffic generator. Initializes DPDK test
421 | | ... | environment.
423 | | ... | *Arguments:*
424 | | ... | - topology_type - Topology type. Type: string
425 | | ... | - nic_model - Interface model. Type: string
429 | | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
431 | | [Arguments] | ${topology_type} | ${nic_model}
433 | | Set variables in 3-node circular topology with DUT interface model
434 | | ... | ${nic_model}
435 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
436 | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
437 | | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
438 | | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
440 | Set up IPSec performance test suite
442 | | ... | Suite preparation phase that sets default startup configuration of
443 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global
444 | | ... | variables used in test cases based on interface model provided as an
445 | | ... | argument. Initializes traffic generator.
446 | | ... | Then it configures crypto device and kernel module on all DUTs.
448 | | ... | *Arguments:*
449 | | ... | - topology_type - Topology type. Type: string
450 | | ... | - nic_model - Interface model. Type: string
451 | | ... | - crypto_type - Crypto device type - HW_cryptodev or SW_cryptodev
452 | | ... | (Optional). Type: string, default value: HW_cryptodev
456 | | ... | \| Set up IPSec performance test suite \| L2 \
457 | | ... | \| Intel-X520-DA2 \|
459 | | [Arguments] | ${topology_type} | ${nic_model} | ${crypto_type}=HW_cryptodev
461 | | Set up 3-node performance topology with DUT's NIC model
462 | | ... | ${topology_type} | ${nic_model}
463 | | ${numvfs}= | Set Variable If
464 | | ... | '${crypto_type}' == 'HW_cryptodev' | ${32}
465 | | ... | '${crypto_type}' == 'SW_cryptodev' | ${0}
466 | | Configure crypto device on all DUTs | force_init=${True} | numvfs=${numvfs}
467 | | Run Keyword If | '${crypto_type}' == 'HW_cryptodev'
468 | | ... | Configure kernel module on all DUTs | igb_uio | force_load=${True}
470 | Set up performance topology with containers
472 | | ... | Suite preparation phase that starts containers
474 | | Set Suite Variable | @{container_groups} | @{EMPTY}
475 | | Construct VNF containers on all DUTs
476 | | Acquire all 'VNF' containers
477 | | Create all 'VNF' containers
478 | | Configure VPP in all 'VNF' containers
479 | | Install VPP in all 'VNF' containers
481 | Set up performance test suite with MEMIF
483 | | ... | Append memif_plugin.so to the list of enabled plugins.
485 | | Set Suite Variable | @{plugins_to_enable}
486 | | Append To List | ${plugins_to_enable} | memif_plugin.so
488 | Set up performance test suite with NAT
490 | | ... | Append nat_plugin.so to the list of enabled plugins.
492 | | Set Suite Variable | @{plugins_to_enable}
493 | | Append To List | ${plugins_to_enable} | nat_plugin.so
495 | Set up performance test suite with ACL
497 | | ... | Append acl_plugin.so to the list of enabled plugins.
499 | | Set Suite Variable | @{plugins_to_enable}
500 | | Append To List | ${plugins_to_enable} | acl_plugin.so
502 | Set up performance test suite with Static SRv6 proxy
504 | | ... | Append srv6as_plugin.so to the list of enabled plugins.
506 | | Set Suite Variable | @{plugins_to_enable}
507 | | Append To List | ${plugins_to_enable} | srv6as_plugin.so
509 | Set up performance test suite with Dynamic SRv6 proxy
511 | | ... | Append srv6ad_plugin.so to the list of enabled plugins.
513 | | Set Suite Variable | @{plugins_to_enable}
514 | | Append To List | ${plugins_to_enable} | srv6ad_plugin.so
516 | Set up performance test suite with Masquerading SRv6 proxy
518 | | ... | Append srv6am_plugin.so to the list of enabled plugins.
520 | | Set Suite Variable | @{plugins_to_enable}
521 | | Append To List | ${plugins_to_enable} | srv6am_plugin.so
523 | Set up performance test suite with LACP mode link bonding
525 | | ... | Append lacp_plugin.so to the list of enabled plugins.
527 | | Set Suite Variable | @{plugins_to_enable}
528 | | Append To List | ${plugins_to_enable} | lacp_plugin.so
530 | Set up 3-node performance topology with wrk and DUT's NIC model
532 | | ... | Suite preparation phase that sets the default startup configuration of
533 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global
534 | | ... | variables used in test cases based on interface model provided as an
535 | | ... | argument. Installs the traffic generator.
537 | | ... | *Arguments:*
538 | | ... | - iface_model - Interface model. Type: string
542 | | ... | \| Set up 3-node performance topology with wrk and DUT's NIC model\
543 | | ... | \| Intel-X520-DA2 \|
545 | | [Arguments] | ${iface_model}
547 | | Set variables in 3-node circular topology with DUT interface model
548 | | ... | ${iface_model}
549 | | Iface update numa node | ${tg}
550 # Make sure TRex is stopped
551 | | ${running}= | Is TRex running | ${tg}
552 | | Run keyword if | ${running}==${True} | Teardown traffic generator | ${tg}
553 | | ${curr_driver}= | Get PCI dev driver | ${tg}
554 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
555 | | Run keyword if | '${curr_driver}'!='${None}'
556 | | ... | PCI Driver Unbind | ${tg} |
557 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
558 # Bind tg_if1 to driver specified in the topology
559 | | ${driver}= | Get Variable Value | ${tg['interfaces']['${tg_if1}']['driver']}
560 | | PCI Driver Bind | ${tg}
561 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} | ${driver}
563 | | ${intf_name}= | Get Linux interface name | ${tg}
564 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
565 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.10.1 | 24
566 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.20.1 | 24
567 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.30.1 | 24
568 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.40.1 | 24
569 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.50.1 | 24
570 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.60.1 | 24
571 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.70.1 | 24
572 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.80.1 | 24
573 | | Set Linux interface up | ${tg} | ${intf_name}
574 | | Install wrk | ${tg}
578 | Tear down 2-node performance topology
580 | | ... | Suite teardown phase with traffic generator teardown.
582 | | Teardown traffic generator | ${tg}
584 | Tear down 2-node performance topology with container
586 | | ... | Suite teardown phase with traffic generator teardown and container
589 | | Teardown traffic generator | ${tg}
590 | | :FOR | ${group} | IN | @{container_groups}
591 | | | Destroy all '${group}' containers
593 | Tear down 3-node performance topology
595 | | ... | Suite teardown phase with traffic generator teardown.
597 | | Teardown traffic generator | ${tg}
599 | Tear down 3-node performance topology with container
601 | | ... | Suite teardown phase with traffic generator teardown and container
604 | | Teardown traffic generator | ${tg}
605 | | :FOR | ${group} | IN | @{container_groups}
606 | | | Destroy all '${group}' containers
610 | Set up performance test
611 | | [Documentation] | Common test setup for performance tests.
613 | | Reset VAT History On All DUTs | ${nodes}
614 | | Create base startup configuration of VPP on all DUTs
616 | Set up tcp performance test
617 | | [Documentation] | Common test setup for TCP performance tests.
619 | | Reset VAT History On All DUTs | ${nodes}
620 | | Create base startup configuration of VPP for TCP tests on all DUTs
622 | Set up performance test with Ligato Kubernetes
623 | | [Documentation] | Common test setup for performance tests with Ligato \
624 | | ... | Kubernetes.
626 | | Apply Kubernetes resource on all duts | ${nodes} | namespaces/csit.yaml
627 | | Apply Kubernetes resource on all duts | ${nodes} | pods/kafka.yaml
628 | | Apply Kubernetes resource on all duts | ${nodes} | pods/etcdv3.yaml
629 | | Apply Kubernetes resource on all duts | ${nodes}
630 | | ... | configmaps/vswitch-agent-cfg.yaml
631 | | Apply Kubernetes resource on all duts | ${nodes}
632 | | ... | configmaps/vnf-agent-cfg.yaml
633 | | Apply Kubernetes resource on all duts | ${nodes}
634 | | ... | pods/contiv-sfc-controller.yaml
635 | | Apply Kubernetes resource on all duts | ${nodes}
636 | | ... | pods/contiv-vswitch.yaml
640 | Tear down performance discovery test
641 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
644 | | ... | *Arguments:*
645 | | ... | - rate - Rate for sending packets. Type: string
646 | | ... | - framesize - L2 Frame Size [B]. Type: integer
647 | | ... | - topology_type - Topology type. Type: string
651 | | ... | \| Tear down performance discovery test \| 4.0mpps \| 64 \
652 | | ... | \| 3-node-IPv4 \|
654 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
656 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
657 | | Show VAT History On All DUTs | ${nodes}
658 | | Run Keyword If Test Failed
659 | | ... | Set Test Variable | ${pkt_trace} | ${True}
660 | | Run Keyword If Test Failed
661 | | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
662 | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
664 | Tear down performance ndrchk test
665 | | [Documentation] | Common test teardown for ndrchk performance tests.
667 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
668 | | Show VAT History On All DUTs | ${nodes}
670 | Tear down performance pdrchk test
671 | | [Documentation] | Common test teardown for pdrchk performance tests.
673 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
674 | | Show VAT History On All DUTs | ${nodes}
676 | Tear down performance mrr test
677 | | [Documentation] | Common test teardown for max-received-rate performance
680 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
681 | | Show VAT History On All DUTs | ${nodes}
683 | Tear down performance test with wrk
684 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
689 | | ... | \| Tear down performance test with wrk \|
691 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
692 | | Show VAT History On All DUTs | ${nodes}
693 | | Show statistics on all DUTs | ${nodes}
695 | Tear down performance test with vhost and VM with dpdk-testpmd
696 | | [Documentation] | Common test teardown for performance tests which use
697 | | ... | vhost(s) and VM(s) with dpdk-testpmd.
699 | | ... | *Arguments:*
700 | | ... | - rate - Rate for sending packets. Type: string
701 | | ... | - framesize - L2 Frame Size [B]. Type: integer
702 | | ... | - topology_type - Topology type. Type: string
703 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
704 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
705 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
706 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
710 | | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \
711 | | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \
712 | | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \|
714 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
715 | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
716 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
718 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
719 | | Show VAT History On All DUTs | ${nodes}
720 | | Show VPP vhost on all DUTs | ${nodes}
721 | | Show statistics on all DUTs | ${nodes}
722 | | Run Keyword If Test Failed
723 | | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
724 | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
725 | | Run keyword unless | ${dut1_node}==${None}
726 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
727 | | Run keyword unless | ${dut2_node}==${None}
728 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
730 | Tear down mrr test with vhost and VM with dpdk-testpmd
731 | | [Documentation] | Common test teardown for mrr tests which use
732 | | ... | vhost(s) and VM(s) with dpdk-testpmd.
734 | | ... | *Arguments:*
735 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
736 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
737 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
738 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
742 | | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \
743 | | ... | \| ${node['DUT1']} \| ${dut_vm_refs} \
744 | | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \|
746 | | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
747 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
749 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
750 | | Show VAT History On All DUTs | ${nodes}
751 | | Show VPP vhost on all DUTs | ${nodes}
752 | | Show statistics on all DUTs | ${nodes}
753 | | Run keyword unless | ${dut1_node}==${None}
754 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
755 | | Run keyword unless | ${dut2_node}==${None}
756 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
758 | Tear down performance test with vhost and VM with dpdk-testpmd and ACL
759 | | [Documentation] | Common test teardown for performance tests which use
760 | | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd.
762 | | ... | *Arguments:*
763 | | ... | - rate - Rate for sending packets. Type: string
764 | | ... | - framesize - L2 Frame Size [B]. Type: integer
765 | | ... | - topology_type - Topology type. Type: string
766 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
767 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
768 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
769 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
771 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
772 | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
773 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
775 | | Tear down performance test with vhost and VM with dpdk-testpmd
776 | | ... | ${rate} | ${framesize} | ${topology_type}
777 | | ... | ${dut1_node} | ${dut1_vm_refs}
778 | | ... | ${dut2_node} | ${dut2_vm_refs}
779 | | Vpp Log Plugin Acl Settings | ${dut1}
780 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
781 | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
783 | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL
784 | | [Documentation] | Common test teardown for mrr tests which use
785 | | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd.
787 | | ... | *Arguments:*
788 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
789 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
790 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
791 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
793 | | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
794 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
796 | | Tear down mrr test with vhost and VM with dpdk-testpmd
797 | | ... | ${dut1_node} | ${dut1_vm_refs}
798 | | ... | ${dut2_node} | ${dut2_vm_refs}
799 | | Vpp Log Plugin Acl Settings | ${dut1}
800 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
801 | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
803 | Tear down performance pdrchk test with vhost and VM with dpdk-testpmd
804 | | [Documentation] | Common test teardown for performance pdrchk tests which \
805 | | ... | use vhost(s) and VM(s) with dpdk-testpmd.
807 | | ... | *Arguments:*
808 | | ... | - rate - Rate for sending packets. Type: string
809 | | ... | - framesize - L2 Frame Size [B]. Type: integer
810 | | ... | - topology_type - Topology type. Type: string
811 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
812 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
813 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
814 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
818 | | ... | \| Tear down performance pdrchk test with vhost and VM with \
819 | | ... | dpdk-testpmd \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \
820 | | ... | \| ${dut_vm_refs} \| ${node['DUT2']} \| ${dut_vm_refs} \|
822 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
823 | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
824 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
826 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
827 | | Show VAT History On All DUTs | ${nodes}
828 | | Show VPP vhost on all DUTs | ${nodes}
829 | | Show statistics on all DUTs | ${nodes}
830 | | Run keyword unless | ${dut1_node}==${None}
831 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
832 | | Run keyword unless | ${dut2_node}==${None}
833 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
835 | Tear down performance mrr test with vhost and VM with dpdk-testpmd
836 | | [Documentation] | Common test teardown for performance mrr tests which \
837 | | ... | use vhost(s) and VM(s) with dpdk-testpmd.
839 | | ... | *Arguments:*
840 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
841 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
842 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
843 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
847 | | ... | \| Tear down performance mrr test with vhost and VM with \
848 | | ... | dpdk-testpmd \| ${node['DUT1']} \| ${dut_vm_refs} \| ${node['DUT2']} \
849 | | ... | \| ${dut_vm_refs} \|
851 | | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
852 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
854 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
855 | | Show VAT History On All DUTs | ${nodes}
856 | | Show VPP vhost on all DUTs | ${nodes}
857 | | Run keyword unless | ${dut1_node}==${None}
858 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
859 | | Run keyword unless | ${dut2_node}==${None}
860 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
862 | Tear down DPDK 2-node performance topology
864 | | ... | Suite teardown phase with traffic generator teardown.
865 | | ... | Cleanup DPDK test environment.
867 | | Teardown traffic generator | ${tg}
868 | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
870 | Tear down DPDK 3-node performance topology
872 | | ... | Suite teardown phase with traffic generator teardown.
873 | | ... | Cleanup DPDK test environment.
875 | | Teardown traffic generator | ${tg}
876 | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
877 | | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
879 | Tear down performance discovery test with NAT
880 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
881 | | ... | tests with NAT feature used.
883 | | ... | *Arguments:*
884 | | ... | - rate - Rate for sending packets. Type: string
885 | | ... | - framesize - L2 Frame Size [B]. Type: integer
886 | | ... | - traffic_profile - Traffic profile. Type: string
890 | | ... | \| Tear down performance discovery test with NAT \| 100000pps \| 64 \
891 | | ... | \| ${traffic_profile} \|
893 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
895 | | Tear down performance discovery test | ${rate} | ${framesize}
896 | | ... | ${traffic_profile}
897 | | Show NAT verbose | ${dut1}
898 | | Show NAT verbose | ${dut2}
900 | Tear down mrr test with NAT
901 | | [Documentation] | Common test teardown for mrr performance \
902 | | ... | tests with NAT feature used.
904 | | ... | \| Tear down mrr test with NAT \|
906 | | Tear down performance mrr test
907 | | Show NAT verbose | ${dut1}
908 | | Show NAT verbose | ${dut2}
910 | Tear down performance test with ACL
911 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
912 | | ... | tests with ACL feature used.
914 | | ... | *Arguments:*
915 | | ... | - rate - Rate for sending packets. Type: string
916 | | ... | - framesize - L2 Frame Size [B]. Type: integer
917 | | ... | - traffic_profile - Traffic profile. Type: string
921 | | ... | \| Tear down performance test with ACL \| 100000pps \| 64 \
922 | | ... | \| ${traffic_profile} \|
924 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
926 | | Tear down performance discovery test | ${rate} | ${framesize}
927 | | ... | ${traffic_profile}
928 | | Vpp Log Plugin Acl Settings | ${dut1}
929 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
930 | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
932 | Tear down mrr test with ACL
933 | | [Documentation] | Common test teardown for mrr performance \
934 | | ... | tests with ACL feature used.
938 | | ... | \| Tear down mrr test with ACL \|
940 | | Tear down performance mrr test
941 | | Vpp Log Plugin Acl Settings | ${dut1}
942 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
943 | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
945 | Tear down performance test with MACIP ACL
946 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
947 | | ... | tests with MACIP ACL feature used.
949 | | ... | *Arguments:*
950 | | ... | - rate - Rate for sending packets. Type: string
951 | | ... | - framesize - L2 Frame Size [B]. Type: integer
952 | | ... | - traffic_profile - Traffic profile. Type: string
956 | | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \
957 | | ... | \| ${traffic_profile} \|
959 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
961 | | Tear down performance discovery test | ${rate} | ${framesize}
962 | | ... | ${traffic_profile}
963 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
964 | | ... | Vpp Log Macip Acl Settings | ${dut1}
965 | | Run Keyword And Ignore Error
966 | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
968 | Tear down mrr test with MACIP ACL
969 | | [Documentation] | Common test teardown for mrr performance \
970 | | ... | tests with MACIP ACL feature used.
974 | | ... | \| Tear down mrr test with MACIP ACL \|
976 | | Tear down performance mrr test
977 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
978 | | ... | Vpp Log Macip Acl Settings | ${dut1}
979 | | Run Keyword And Ignore Error
980 | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
982 | Tear down performance test with Ligato Kubernetes
983 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
984 | | ... | tests with Ligato Kubernetes.
986 | | Run Keyword If Test Failed
987 | | ... | Get Kubernetes logs on all DUTs | ${nodes} | csit
988 | | Run Keyword If Test Failed
989 | | ... | Describe Kubernetes resource on all DUTs | ${nodes} | csit
990 | | Delete Kubernetes resource on all DUTs | ${nodes} | csit
992 | Tear down performance test with SRv6 with encapsulation
993 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
994 | | ... | tests with SRv6 with encapsulation feature used.
996 | | ... | *Arguments:*
997 | | ... | - rate - Rate for sending packets. Type: string
998 | | ... | - framesize - L2 Frame Size [B]. Type: integer/string
999 | | ... | - traffic_profile - Traffic profile. Type: string
1001 | | ... | *Example:*
1003 | | ... | \| Tear down performance test with SRv6 with encapsulation \
1004 | | ... | \| 100000pps \| 64 \| ${traffic_profile} \|
1006 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
1008 | | Tear down performance discovery test | ${rate} | ${framesize}
1009 | | ... | ${traffic_profile}
1010 | | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes}
1011 | | Run Keyword If Test Failed
1012 | | ... | Show SR Steering Policies on all DUTs | ${nodes}
1013 | | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}
1015 | Tear down mrr test with SRv6 with encapsulation
1016 | | [Documentation] | Common test teardown for mrr tests with SRv6 with \
1017 | | ... | encapsulation feature used.
1019 | | ... | *Example:*
1021 | | ... | \| Tear down mrr test with SRv6 with encapsulation \|
1023 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
1024 | | Show VAT History On All DUTs | ${nodes}
1025 | | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes}
1026 | | Run Keyword If Test Failed
1027 | | ... | Show SR Steering Policies on all DUTs | ${nodes}
1028 | | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}