1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
6 # http://www.apache.org/licenses/LICENSE-2.0
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
15 | Library | resources.libraries.python.DUTSetup
16 | Library | resources.tools.wrk.wrk
17 | Resource | resources/libraries/robot/performance/performance_configuration.robot
18 | Resource | resources/libraries/robot/performance/performance_utils.robot
19 | Documentation | Performance suite keywords - Suite and test setups and
24 # Keywords used in setups and teardowns
26 | Set variables in 2-node circular topology
28 | | ... | Compute path for testing on two given nodes in circular
29 | | ... | topology and set corresponding suite variables.
31 | | ... | _NOTE:_ This KW sets following suite variables:
32 | | ... | - tg - TG node
33 | | ... | - tg_if1 - 1st TG interface towards DUT.
34 | | ... | - tg_if2 - 2nd TG interface towards DUT.
35 | | ... | - dut1 - DUT1 node
36 | | ... | - dut1_if1 - 1st DUT interface towards TG.
37 | | ... | - dut1_if2 - 2nd DUT interface towards TG.
39 | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
40 | | Compute Path | always_same_link=${FALSE}
41 | | ${tg_if1} | ${tg}= | First Interface
42 | | ${dut1_if1} | ${dut1}= | First Ingress Interface
43 | | ${dut1_if2} | ${dut1}= | Last Egress Interface
44 | | ${tg_if2} | ${tg}= | Last Interface
45 | | Set Suite Variable | ${tg}
46 | | Set Suite Variable | ${tg_if1}
47 | | Set Suite Variable | ${tg_if2}
48 | | Set Suite Variable | ${dut1}
49 | | Set Suite Variable | ${dut1_if1}
50 | | Set Suite Variable | ${dut1_if2}
52 | Set variables in 3-node circular topology
54 | | ... | Compute path for testing on three given nodes in circular
55 | | ... | topology and set corresponding suite variables.
57 | | ... | _NOTE:_ This KW sets following suite variables:
58 | | ... | - tg - TG node
59 | | ... | - tg_if1 - TG interface towards DUT1.
60 | | ... | - tg_if2 - TG interface towards DUT2.
61 | | ... | - dut1 - DUT1 node
62 | | ... | - dut1_if1 - DUT1 interface towards TG.
63 | | ... | - dut1_if2 - DUT1 interface towards DUT2.
64 | | ... | - dut2 - DUT2 node
65 | | ... | - dut2_if1 - DUT2 interface towards DUT1.
66 | | ... | - dut2_if2 - DUT2 interface towards TG.
68 | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
69 | | ... | ${nodes['TG']}
71 | | ${tg_if1} | ${tg}= | Next Interface
72 | | ${dut1_if1} | ${dut1}= | Next Interface
73 | | ${dut1_if2} | ${dut1}= | Next Interface
74 | | ${dut2_if1} | ${dut2}= | Next Interface
75 | | ${dut2_if2} | ${dut2}= | Next Interface
76 | | ${tg_if2} | ${tg}= | Next Interface
77 | | Set Suite Variable | ${tg}
78 | | Set Suite Variable | ${tg_if1}
79 | | Set Suite Variable | ${tg_if2}
80 | | Set Suite Variable | ${dut1}
81 | | Set Suite Variable | ${dut1_if1}
82 | | Set Suite Variable | ${dut1_if2}
83 | | Set Suite Variable | ${dut2}
84 | | Set Suite Variable | ${dut2_if1}
85 | | Set Suite Variable | ${dut2_if2}
87 | Set variables in 2-node circular topology with DUT interface model
89 | | ... | Compute path for testing on two given nodes in circular topology
90 | | ... | based on interface model provided as an argument and set
91 | | ... | corresponding suite variables.
93 | | ... | *Arguments:*
94 | | ... | - iface_model - Interface model. Type: string
96 | | ... | _NOTE:_ This KW sets following suite variables:
97 | | ... | - tg - TG node
98 | | ... | - tg_if1 - 1st TG interface towards DUT.
99 | | ... | - tg_if2 - 2nd TG interface towards DUT.
100 | | ... | - dut1 - DUT1 node
101 | | ... | - dut1_if1 - 1st DUT interface towards TG.
102 | | ... | - dut1_if2 - 2nd DUT interface towards TG.
106 | | ... | \| Set variables in 2-node circular topology with DUT interface model\
107 | | ... | \| Intel-X520-DA2 \|
109 | | [Arguments] | ${iface_model}
111 | | ${iface_model_list}= | Create list | ${iface_model}
112 | | Append Node | ${nodes['TG']}
113 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
114 | | Append Node | ${nodes['TG']}
115 | | Compute Path | always_same_link=${FALSE}
116 | | ${tg_if1} | ${tg}= | First Interface
117 | | ${dut1_if1} | ${dut1}= | First Ingress Interface
118 | | ${dut1_if2} | ${dut1}= | Last Egress Interface
119 | | ${tg_if2} | ${tg}= | Last Interface
120 | | Set Suite Variable | ${tg}
121 | | Set Suite Variable | ${tg_if1}
122 | | Set Suite Variable | ${tg_if2}
123 | | Set Suite Variable | ${dut1}
124 | | Set Suite Variable | ${dut1_if1}
125 | | Set Suite Variable | ${dut1_if2}
127 | Set variables in 3-node circular topology with DUT interface model
129 | | ... | Compute path for testing on three given nodes in circular topology
130 | | ... | based on interface model provided as an argument and set
131 | | ... | corresponding suite variables.
133 | | ... | *Arguments:*
134 | | ... | - iface_model - Interface model. Type: string
136 | | ... | _NOTE:_ This KW sets following suite variables:
137 | | ... | - tg - TG node
138 | | ... | - tg_if1 - TG interface towards DUT1.
139 | | ... | - tg_if2 - TG interface towards DUT2.
140 | | ... | - dut1 - DUT1 node
141 | | ... | - dut1_if1 - DUT1 interface towards TG.
142 | | ... | - dut1_if2 - DUT1 interface towards DUT2.
143 | | ... | - dut2 - DUT2 node
144 | | ... | - dut2_if1 - DUT2 interface towards TG.
145 | | ... | - dut2_if2 - DUT2 interface towards DUT1.
149 | | ... | \| Set variables in 3-node circular topology with DUT interface model\
150 | | ... | \| Intel-X520-DA2 \|
152 | | [Arguments] | ${iface_model}
154 | | ${iface_model_list}= | Create list | ${iface_model}
155 | | Append Node | ${nodes['TG']}
156 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
157 | | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
158 | | Append Node | ${nodes['TG']}
160 | | ${tg_if1} | ${tg}= | Next Interface
161 | | ${dut1_if1} | ${dut1}= | Next Interface
162 | | ${dut1_if2} | ${dut1}= | Next Interface
163 | | ${dut2_if1} | ${dut2}= | Next Interface
164 | | ${dut2_if2} | ${dut2}= | Next Interface
165 | | ${tg_if2} | ${tg}= | Next Interface
166 | | Set Suite Variable | ${tg}
167 | | Set Suite Variable | ${tg_if1}
168 | | Set Suite Variable | ${tg_if2}
169 | | Set Suite Variable | ${dut1}
170 | | Set Suite Variable | ${dut1_if1}
171 | | Set Suite Variable | ${dut1_if2}
172 | | Set Suite Variable | ${dut2}
173 | | Set Suite Variable | ${dut2_if1}
174 | | Set Suite Variable | ${dut2_if2}
176 | Tear down guest VM with dpdk-testpmd
178 | | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}.
179 | | ... | Argument is dictionary of all qemu nodes running with its names.
180 | | ... | Dpdk-testpmd is stopped gracefully with printing stats.
182 | | ... | *Arguments:*
183 | | ... | - dut_node - Node where to clean qemu. Type: dictionary
184 | | ... | - dut_vm_refs - VM references on node. Type: dictionary
188 | | ... | \| Tear down guest VM with dpdk-testpmd \| ${node['DUT1']} \
189 | | ... | \| ${dut_vm_refs} \|
191 | | [Arguments] | ${dut_node} | ${dut_vm_refs}
192 | | ${vms_number}= | Get Length | ${dut_vm_refs}
193 | | ${index}= | Set Variable | ${0}
194 | | :FOR | ${vm_name} | IN | @{dut_vm_refs}
195 | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
196 | | | ${index}= | Evaluate | ${index} + 1
197 | | | Dpdk Testpmd Stop | ${vm}
198 | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
199 | | | Run Keyword | ${vm_name}.Qemu Clear Socks
200 | | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All
204 | | ... | Stop all qemu processes running on ${dut_node}.
205 | | ... | Argument is dictionary of all qemu nodes running with its names.
207 | | ... | *Arguments:*
208 | | ... | - dut_node - Node where to clean qemu. Type: dictionary
209 | | ... | - dut_vm_refs - VM references on node. Type: dictionary
213 | | ... | \| Tear down guest VM \| ${node['DUT1']} \
214 | | ... | \| ${dut_vm_refs} \|
216 | | [Arguments] | ${dut_node} | ${dut_vm_refs}
217 | | ${vms_number}= | Get Length | ${dut_vm_refs}
218 | | ${index}= | Set Variable | ${0}
219 | | :FOR | ${vm_name} | IN | @{dut_vm_refs}
220 | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
221 | | | ${index}= | Evaluate | ${index} + 1
222 | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
223 | | | Run Keyword | ${vm_name}.Qemu Clear Socks
224 | | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All
228 | Set up 2-node performance topology with DUT's NIC model
230 | | ... | Suite preparation phase that setup default startup configuration of
231 | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
232 | | ... | variables used in test cases based on interface model provided as an
233 | | ... | argument. Initializes traffic generator.
235 | | ... | *Arguments:*
236 | | ... | - topology_type - Topology type. Type: string
237 | | ... | - nic_model - Interface model. Type: string
241 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
243 | | [Arguments] | ${topology_type} | ${nic_model}
245 | | Set variables in 2-node circular topology with DUT interface model
246 | | ... | ${nic_model}
247 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
248 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
250 | Set up 2-node-switched performance topology with DUT's NIC model
252 | | ... | Suite preparation phase that setup default startup configuration of
253 | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
254 | | ... | variables used in test cases based on interface model provided as an
255 | | ... | argument. Initializes traffic generator.
257 | | ... | *Arguments:*
258 | | ... | - topology_type - Topology type. Type: string
259 | | ... | - nic_model - Interface model. Type: string
260 | | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string
261 | | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string
265 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \
266 | | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \|
268 | | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac}
269 | | ... | ${tg_if2_dest_mac}
271 | | Set variables in 2-node circular topology with DUT interface model
272 | | ... | ${nic_model}
273 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
274 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
275 | | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac}
277 | Set up 3-node performance topology with DUT's NIC model
279 | | ... | Suite preparation phase that setup default startup configuration of
280 | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
281 | | ... | variables used in test cases based on interface model provided as an
282 | | ... | argument. Initializes traffic generator.
284 | | ... | *Arguments:*
285 | | ... | - topology_type - Topology type. Type: string
286 | | ... | - nic_model - Interface model. Type: string
290 | | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \
291 | | ... | \| Intel-X520-DA2 \|
293 | | [Arguments] | ${topology_type} | ${nic_model}
295 | | Set variables in 3-node circular topology with DUT interface model
296 | | ... | ${nic_model}
297 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
298 | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
300 | Set up DPDK 2-node performance topology with DUT's NIC model
302 | | ... | Updates interfaces on all nodes and setup global
303 | | ... | variables used in test cases based on interface model provided as an
304 | | ... | argument. Initializes traffic generator. Initializes DPDK test
305 | | ... | environment.
307 | | ... | *Arguments:*
308 | | ... | - topology_type - Topology type. Type: string
309 | | ... | - nic_model - Interface model. Type: string
313 | | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \
314 | | ... | \| L2 \| Intel-X520-DA2 \|
316 | | [Arguments] | ${topology_type} | ${nic_model}
318 | | Set variables in 2-node circular topology with DUT interface model
319 | | ... | ${nic_model}
320 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
321 | | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type}
322 | | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
324 | Set up DPDK 3-node performance topology with DUT's NIC model
326 | | ... | Updates interfaces on all nodes and setup global
327 | | ... | variables used in test cases based on interface model provided as an
328 | | ... | argument. Initializes traffic generator. Initializes DPDK test
329 | | ... | environment.
331 | | ... | *Arguments:*
332 | | ... | - topology_type - Topology type. Type: string
333 | | ... | - nic_model - Interface model. Type: string
337 | | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
339 | | [Arguments] | ${topology_type} | ${nic_model}
341 | | Set variables in 3-node circular topology with DUT interface model
342 | | ... | ${nic_model}
343 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
344 | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type}
345 | | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
346 | | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
348 | Set up IPSec performance test suite
350 | | ... | Suite preparation phase that sets default startup configuration of
351 | | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global
352 | | ... | variables used in test cases based on interface model provided as an
353 | | ... | argument. Initializes traffic generator.
354 | | ... | Then it configures crypto device and kernel module on all DUTs.
356 | | ... | *Arguments:*
357 | | ... | - topology_type - Topology type. Type: string
358 | | ... | - nic_model - Interface model. Type: string
359 | | ... | - crypto_type - Crypto device type - HW_cryptodev or SW_cryptodev
360 | | ... | (Optional). Type: string, default value: HW_cryptodev
364 | | ... | \| Set up IPSec performance test suite \| L2 \
365 | | ... | \| Intel-X520-DA2 \|
367 | | [Arguments] | ${topology_type} | ${nic_model} | ${crypto_type}=HW_cryptodev
369 | | Set up 3-node performance topology with DUT's NIC model
370 | | ... | ${topology_type} | ${nic_model}
371 | | ${numvfs}= | Set Variable If
372 | | ... | '${crypto_type}' == 'HW_cryptodev' | ${32}
373 | | ... | '${crypto_type}' == 'SW_cryptodev' | ${0}
374 | | Configure crypto device on all DUTs | force_init=${True} | numvfs=${numvfs}
375 | | Run Keyword If | '${crypto_type}' == 'HW_cryptodev'
376 | | ... | Configure kernel module on all DUTs | igb_uio | force_load=${True}
378 | Set up performance topology with containers
380 | | ... | Suite preparation phase that starts containers
382 | | Set Suite Variable | @{container_groups} | @{EMPTY}
383 | | Construct VNF containers on all DUTs
384 | | Acquire all 'VNF' containers
385 | | Create all 'VNF' containers
386 | | Configure VPP in all 'VNF' containers
387 | | Install VPP in all 'VNF' containers
389 | Set up performance test suite with MEMIF
391 | | ... | Append memif_plugin.so to the list of enabled plugins.
393 | | Set Suite Variable | @{plugins_to_enable}
394 | | Append To List | ${plugins_to_enable} | memif_plugin.so
396 | Set up performance test suite with NAT
398 | | ... | Append nat_plugin.so to the list of enabled plugins.
400 | | Set Suite Variable | @{plugins_to_enable}
401 | | Append To List | ${plugins_to_enable} | nat_plugin.so
403 | Set up performance test suite with ACL
405 | | ... | Append acl_plugin.so to the list of enabled plugins.
407 | | Set Suite Variable | @{plugins_to_enable}
408 | | Append To List | ${plugins_to_enable} | acl_plugin.so
410 | Set up 3-node performance topology with wrk and DUT's NIC model
412 | | ... | Suite preparation phase that setup default startup configuration of
413 | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global
414 | | ... | variables used in test cases based on interface model provided as an
415 | | ... | argument. Installs the traffic generator.
417 | | ... | *Arguments:*
418 | | ... | - iface_model - Interface model. Type: string
422 | | ... | \| Set up 3-node performance topology with wrk and DUT's NIC model\
423 | | ... | \| Intel-X520-DA2 \|
425 | | [Arguments] | ${iface_model}
427 | | Set variables in 3-node circular topology with DUT interface model
428 | | ... | ${iface_model}
429 | | Iface update numa node | ${tg}
430 # Make sure TRex is stopped
431 | | ${running}= | Is TRex running | ${tg}
432 | | Run keyword if | ${running}==${True} | Teardown traffic generator | ${tg}
433 | | ${curr_driver}= | Get PCI dev driver | ${tg}
434 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
435 | | Run keyword if | '${curr_driver}'!='${None}'
436 | | ... | PCI Driver Unbind | ${tg} |
437 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
438 # Bind tg_if1 to driver specified in the topology
439 | | ${driver}= | Get Variable Value | ${tg['interfaces']['${tg_if1}']['driver']}
440 | | PCI Driver Bind | ${tg}
441 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} | ${driver}
443 | | ${intf_name}= | Get Linux interface name | ${tg}
444 | | ... | ${tg['interfaces']['${tg_if1}']['pci_address']}
445 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.10.1 | 24
446 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.20.1 | 24
447 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.30.1 | 24
448 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.40.1 | 24
449 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.50.1 | 24
450 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.60.1 | 24
451 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.70.1 | 24
452 | | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.80.1 | 24
453 | | Set Linux interface up | ${tg} | ${intf_name}
454 | | Install wrk | ${tg}
458 | Tear down 3-node performance topology
460 | | ... | Suite teardown phase with traffic generator teardown.
462 | | Teardown traffic generator | ${tg}
464 | Tear down 3-node performance topology with container
466 | | ... | Suite teardown phase with traffic generator teardown and container
469 | | Teardown traffic generator | ${tg}
470 | | :FOR | ${group} | IN | @{container_groups}
471 | | | Destroy all '${group}' containers
473 | Tear down 2-node performance topology
475 | | ... | Suite teardown phase with traffic generator teardown.
477 | | Teardown traffic generator | ${tg}
479 | Tear down 2-node performance topology with container
481 | | ... | Suite teardown phase with traffic generator teardown and container
484 | | Teardown traffic generator | ${tg}
485 | | :FOR | ${group} | IN | @{container_groups}
486 | | | Destroy all '${group}' containers
490 | Set up performance test
491 | | [Documentation] | Common test setup for performance tests.
493 | | Reset VAT History On All DUTs | ${nodes}
494 | | Create base startup configuration of VPP on all DUTs
496 | Set up performance test with Ligato Kubernetes
497 | | [Documentation] | Common test setup for performance tests with Ligato \
498 | | ... | Kubernetes.
500 | | Apply Kubernetes resource on all duts | ${nodes} | namespaces/csit.yaml
501 | | Apply Kubernetes resource on all duts | ${nodes} | pods/kafka.yaml
502 | | Apply Kubernetes resource on all duts | ${nodes} | pods/etcdv3.yaml
503 | | Apply Kubernetes resource on all duts | ${nodes}
504 | | ... | configmaps/vswitch-agent-cfg.yaml
505 | | Apply Kubernetes resource on all duts | ${nodes}
506 | | ... | configmaps/vnf-agent-cfg.yaml
507 | | Apply Kubernetes resource on all duts | ${nodes}
508 | | ... | pods/contiv-sfc-controller.yaml
509 | | Apply Kubernetes resource on all duts | ${nodes}
510 | | ... | pods/contiv-vswitch.yaml
514 | Tear down performance discovery test
515 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
518 | | ... | *Arguments:*
519 | | ... | - rate - Rate for sending packets. Type: string
520 | | ... | - framesize - L2 Frame Size [B]. Type: integer
521 | | ... | - topology_type - Topology type. Type: string
525 | | ... | \| Tear down performance discovery test \| 4.0mpps \| 64 \
526 | | ... | \| 3-node-IPv4 \|
528 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
530 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
531 | | Show VAT History On All DUTs | ${nodes}
532 | | Run Keyword If Test Failed
533 | | ... | Set Test Variable | ${pkt_trace} | ${True}
534 | | Run Keyword If Test Failed
535 | | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
536 | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
538 | Tear down performance ndrchk test
539 | | [Documentation] | Common test teardown for ndrchk performance tests.
541 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
542 | | Show VAT History On All DUTs | ${nodes}
544 | Tear down performance pdrchk test
545 | | [Documentation] | Common test teardown for pdrchk performance tests.
547 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
548 | | Show VAT History On All DUTs | ${nodes}
550 | Tear down performance mrr test
551 | | [Documentation] | Common test teardown for max-received-rate performance
554 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
555 | | Show VAT History On All DUTs | ${nodes}
557 | Tear down performance test with wrk
558 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
563 | | ... | \| Tear down performance test with wrk \|
565 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
566 | | Show VAT History On All DUTs | ${nodes}
567 | | Show statistics on all DUTs | ${nodes}
569 | Tear down performance test with vhost and VM with dpdk-testpmd
570 | | [Documentation] | Common test teardown for performance tests which use
571 | | ... | vhost(s) and VM(s) with dpdk-testpmd.
573 | | ... | *Arguments:*
574 | | ... | - rate - Rate for sending packets. Type: string
575 | | ... | - framesize - L2 Frame Size [B]. Type: integer
576 | | ... | - topology_type - Topology type. Type: string
577 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
578 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
579 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
580 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
584 | | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \
585 | | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \
586 | | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \|
588 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
589 | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
590 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
592 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
593 | | Show VAT History On All DUTs | ${nodes}
594 | | Show VPP vhost on all DUTs | ${nodes}
595 | | Show statistics on all DUTs | ${nodes}
596 | | Run Keyword If Test Failed
597 | | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
598 | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
599 | | Run keyword unless | ${dut1_node}==${None}
600 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
601 | | Run keyword unless | ${dut2_node}==${None}
602 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
604 | Tear down performance pdrchk test with vhost and VM with dpdk-testpmd
605 | | [Documentation] | Common test teardown for performance pdrchk tests which \
606 | | ... | use vhost(s) and VM(s) with dpdk-testpmd.
608 | | ... | *Arguments:*
609 | | ... | - rate - Rate for sending packets. Type: string
610 | | ... | - framesize - L2 Frame Size [B]. Type: integer
611 | | ... | - topology_type - Topology type. Type: string
612 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
613 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
614 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
615 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
619 | | ... | \| Tear down performance pdrchk test with vhost and VM with \
620 | | ... | dpdk-testpmd \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \
621 | | ... | \| ${dut_vm_refs} \| ${node['DUT2']} \| ${dut_vm_refs} \|
623 | | [Arguments] | ${rate} | ${framesize} | ${topology_type}
624 | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
625 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
627 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
628 | | Show VAT History On All DUTs | ${nodes}
629 | | Show VPP vhost on all DUTs | ${nodes}
630 | | Show statistics on all DUTs | ${nodes}
631 | | Run keyword unless | ${dut1_node}==${None}
632 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
633 | | Run keyword unless | ${dut2_node}==${None}
634 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
636 | Tear down performance mrr test with vhost and VM with dpdk-testpmd
637 | | [Documentation] | Common test teardown for performance mrr tests which \
638 | | ... | use vhost(s) and VM(s) with dpdk-testpmd.
640 | | ... | *Arguments:*
641 | | ... | - dut1_node - Node where to clean qemu. Type: dictionary
642 | | ... | - dut1_vm_refs - VM references on node. Type: dictionary
643 | | ... | - dut2_node - Node where to clean qemu. Type: dictionary
644 | | ... | - dut2_vm_refs - VM references on node. Type: dictionary
648 | | ... | \| Tear down performance mrr test with vhost and VM with \
649 | | ... | dpdk-testpmd \| ${node['DUT1']} \| ${dut_vm_refs} \| ${node['DUT2']} \
650 | | ... | \| ${dut_vm_refs} \|
652 | | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
653 | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
655 | | Remove All Added Ports On All DUTs From Topology | ${nodes}
656 | | Show VAT History On All DUTs | ${nodes}
657 | | Show VPP vhost on all DUTs | ${nodes}
658 | | Run keyword unless | ${dut1_node}==${None}
659 | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs}
660 | | Run keyword unless | ${dut2_node}==${None}
661 | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs}
663 | Tear down DPDK 3-node performance topology
665 | | ... | Suite teardown phase with traffic generator teardown.
666 | | ... | Cleanup DPDK test environment.
668 | | Teardown traffic generator | ${tg}
669 | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
670 | | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
672 | Tear down DPDK 2-node performance topology
674 | | ... | Suite teardown phase with traffic generator teardown.
675 | | ... | Cleanup DPDK test environment.
677 | | Teardown traffic generator | ${tg}
678 | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
680 | Tear down performance discovery test with NAT
681 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
682 | | ... | tests with NAT feature used.
684 | | ... | *Arguments:*
685 | | ... | - rate - Rate for sending packets. Type: string
686 | | ... | - framesize - L2 Frame Size [B]. Type: integer
687 | | ... | - traffic_profile - Traffic profile. Type: string
691 | | ... | \| Tear down performance discovery test with NAT \| 100000pps \| 64 \
692 | | ... | \| ${traffic_profile} \|
694 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
696 | | Tear down performance discovery test | ${rate} | ${framesize}
697 | | ... | ${traffic_profile}
698 | | Show NAT verbose | ${dut1}
699 | | Show NAT verbose | ${dut2}
701 | Tear down performance test with ACL
702 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
703 | | ... | tests with ACL feature used.
705 | | ... | *Arguments:*
706 | | ... | - rate - Rate for sending packets. Type: string
707 | | ... | - framesize - L2 Frame Size [B]. Type: integer
708 | | ... | - traffic_profile - Traffic profile. Type: string
712 | | ... | \| Tear down performance test with ACL \| 100000pps \| 64 \
713 | | ... | \| ${traffic_profile} \|
715 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
717 | | Tear down performance discovery test | ${rate} | ${framesize}
718 | | ... | ${traffic_profile}
719 | | Vpp Log Plugin Acl Settings | ${dut1}
720 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
721 | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
723 | Tear down performance test with MACIP ACL
724 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
725 | | ... | tests with MACIP ACL feature used.
727 | | ... | *Arguments:*
728 | | ... | - rate - Rate for sending packets. Type: string
729 | | ... | - framesize - L2 Frame Size [B]. Type: integer
730 | | ... | - traffic_profile - Traffic profile. Type: string
734 | | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \
735 | | ... | \| ${traffic_profile} \|
737 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
739 | | Tear down performance discovery test | ${rate} | ${framesize}
740 | | ... | ${traffic_profile}
741 | | Run Keyword If Test Failed | Run Keyword And Ignore Error
742 | | ... | Vpp Log Macip Acl Settings | ${dut1}
743 | | Run Keyword And Ignore Error
744 | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
746 | Tear down performance test with Ligato Kubernetes
747 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
748 | | ... | tests with Ligato Kubernetes.
750 | | Run Keyword If Test Failed
751 | | ... | Get Kubernetes logs on all DUTs | ${nodes} | csit
752 | | Run Keyword If Test Failed
753 | | ... | Describe Kubernetes resource on all DUTs | ${nodes} | csit
754 | | Delete Kubernetes resource on all DUTs | ${nodes} | csit
756 | Tear down performance test with SRv6 with encapsulation
757 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
758 | | ... | tests with SRv6 with encapsulation feature used.
760 | | ... | *Arguments:*
761 | | ... | - rate - Rate for sending packets. Type: string
762 | | ... | - framesize - L2 Frame Size [B]. Type: integer
763 | | ... | - traffic_profile - Traffic profile. Type: string
767 | | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \
768 | | ... | \| ${traffic_profile} \|
770 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
772 | | Tear down performance discovery test | ${rate} | ${framesize}
773 | | ... | ${traffic_profile}
774 | | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes}
775 | | Run Keyword If Test Failed
776 | | ... | Show SR Steering Policies on all DUTs | ${nodes}
777 | | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}