2 * Copyright (c) 2015 Cisco and/or its affiliates.
3 * Licensed under the Apache License, Version 2.0 (the "License");
4 * you may not use this file except in compliance with the License.
5 * You may obtain a copy of the License at:
7 * http://www.apache.org/licenses/LICENSE-2.0
9 * Unless required by applicable law or agreed to in writing, software
10 * distributed under the License is distributed on an "AS IS" BASIS,
11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 * See the License for the specific language governing permissions and
13 * limitations under the License.
16 * interface_cli.c: interface CLI
18 * Copyright (c) 2008 Eliot Dresselhaus
20 * Permission is hereby granted, free of charge, to any person obtaining
21 * a copy of this software and associated documentation files (the
22 * "Software"), to deal in the Software without restriction, including
23 * without limitation the rights to use, copy, modify, merge, publish,
24 * distribute, sublicense, and/or sell copies of the Software, and to
25 * permit persons to whom the Software is furnished to do so, subject to
26 * the following conditions:
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
35 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
36 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
37 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
41 * @brief Interface CLI.
43 * Source code for several CLI interface commands.
46 #include <vnet/vnet.h>
47 #include <vnet/ip/ip.h>
48 #include <vppinfra/bitmap.h>
49 #include <vnet/fib/ip4_fib.h>
50 #include <vnet/fib/ip6_fib.h>
51 #include <vnet/l2/l2_output.h>
52 #include <vnet/l2/l2_input.h>
53 #include <vnet/classify/vnet_classify.h>
54 #include <vnet/interface/rx_queue_funcs.h>
55 #include <vnet/interface/tx_queue_funcs.h>
57 compare_interface_names (void *a1, void *a2)
62 return vnet_hw_interface_compare (vnet_get_main (), *hi1, *hi2);
66 show_or_clear_hw_interfaces (vlib_main_t * vm,
67 unformat_input_t * input,
68 vlib_cli_command_t * cmd, int is_show)
70 clib_error_t *error = 0;
71 vnet_main_t *vnm = vnet_get_main ();
72 vnet_interface_main_t *im = &vnm->interface_main;
73 vnet_hw_interface_t *hi;
74 u32 hw_if_index, *hw_if_indices = 0;
75 int i, verbose = -1, show_bond = 0;
77 while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
79 /* See if user wants to show a specific interface. */
81 (input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
82 vec_add1 (hw_if_indices, hw_if_index);
84 /* See if user wants to show an interface with a specific hw_if_index. */
85 else if (unformat (input, "%u", &hw_if_index))
86 vec_add1 (hw_if_indices, hw_if_index);
88 else if (unformat (input, "verbose"))
89 verbose = 1; /* this is also the default */
91 else if (unformat (input, "detail"))
94 else if (unformat (input, "brief"))
97 else if (unformat (input, "bond"))
101 verbose = 0; /* default to brief for link bonding */
106 error = clib_error_return (0, "unknown input `%U'",
107 format_unformat_error, input);
112 /* Gather interfaces. */
113 if (vec_len (hw_if_indices) == 0)
114 pool_foreach (hi, im->hw_interfaces)
115 vec_add1 (hw_if_indices, hi - im->hw_interfaces);
118 verbose = 1; /* default to verbose (except bond) */
123 vec_sort_with_function (hw_if_indices, compare_interface_names);
125 vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm, 0, verbose);
126 for (i = 0; i < vec_len (hw_if_indices); i++)
128 hi = vnet_get_hw_interface (vnm, hw_if_indices[i]);
129 if (show_bond == 0) /* show all interfaces */
130 vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm,
132 else if ((hi->bond_info) &&
133 (hi->bond_info != VNET_HW_INTERFACE_BOND_INFO_SLAVE))
134 { /* show only bonded interface and all its slave interfaces */
136 vnet_hw_interface_t *shi;
137 vlib_cli_output (vm, "%U\n", format_vnet_hw_interface, vnm,
141 clib_bitmap_foreach (hw_idx, hi->bond_info)
143 shi = vnet_get_hw_interface(vnm, hw_idx);
144 vlib_cli_output (vm, "%U\n",
145 format_vnet_hw_interface, vnm, shi, verbose);
153 for (i = 0; i < vec_len (hw_if_indices); i++)
155 vnet_device_class_t *dc;
157 hi = vnet_get_hw_interface (vnm, hw_if_indices[i]);
158 dc = vec_elt_at_index (im->device_classes, hi->dev_class_index);
160 if (dc->clear_counters)
161 dc->clear_counters (hi->dev_instance);
166 vec_free (hw_if_indices);
170 static clib_error_t *
171 show_hw_interfaces (vlib_main_t * vm,
172 unformat_input_t * input, vlib_cli_command_t * cmd)
174 return show_or_clear_hw_interfaces (vm, input, cmd, 1 /* is_show */ );
177 static clib_error_t *
178 clear_hw_interfaces (vlib_main_t * vm,
179 unformat_input_t * input, vlib_cli_command_t * cmd)
181 return show_or_clear_hw_interfaces (vm, input, cmd, 0 /* is_show */ );
186 * Display more detailed information about all or a list of given interfaces.
187 * The verboseness of the output can be controlled by the following optional
189 * - brief: Only show name, index and state (default for bonded interfaces).
190 * - verbose: Also display additional attributes (default for all other interfaces).
191 * - detail: Also display all remaining attributes and extended statistics.
193 * To limit the output of the command to bonded interfaces and their slave
194 * interfaces, use the '<em>bond</em>' optional parameter.
197 * Example of how to display default data for all interfaces:
198 * @cliexstart{show hardware-interfaces}
199 * Name Idx Link Hardware
200 * GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
201 * Ethernet address ec:f4:bb:c0:bc:fc
203 * carrier up full duplex speed 1000 mtu 9216
204 * rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
206 * GigabitEthernet7/0/1 2 up GigabitEthernet7/0/1
207 * Ethernet address ec:f4:bb:c0:bc:fd
209 * carrier up full duplex speed 1000 mtu 9216
210 * rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
212 * VirtualEthernet0/0/0 3 up VirtualEthernet0/0/0
213 * Ethernet address 02:fe:a5:a9:8b:8e
214 * VirtualEthernet0/0/1 4 up VirtualEthernet0/0/1
215 * Ethernet address 02:fe:c0:4e:3b:b0
216 * VirtualEthernet0/0/2 5 up VirtualEthernet0/0/2
217 * Ethernet address 02:fe:1f:73:92:81
218 * VirtualEthernet0/0/3 6 up VirtualEthernet0/0/3
219 * Ethernet address 02:fe:f2:25:c4:68
220 * local0 0 down local0
223 * Example of how to display '<em>verbose</em>' data for an interface by name and
224 * software index (where 2 is the software index):
225 * @cliexstart{show hardware-interfaces GigabitEthernet7/0/0 2 verbose}
226 * Name Idx Link Hardware
227 * GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
228 * Ethernet address ec:f4:bb:c0:bc:fc
230 * carrier up full duplex speed 1000 mtu 9216
231 * rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
233 * GigabitEthernet7/0/1 2 down GigabitEthernet7/0/1
234 * Ethernet address ec:f4:bb:c0:bc:fd
236 * carrier up full duplex speed 1000 mtu 9216
237 * rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
242 VLIB_CLI_COMMAND (show_hw_interfaces_command, static) = {
243 .path = "show hardware-interfaces",
244 .short_help = "show hardware-interfaces [brief|verbose|detail] [bond] "
245 "[<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]]",
246 .function = show_hw_interfaces,
252 * Clear the extended statistics for all or a list of given interfaces
253 * (statistics associated with the '<em>show hardware-interfaces</em>' command).
256 * Example of how to clear the extended statistics for all interfaces:
257 * @cliexcmd{clear hardware-interfaces}
258 * Example of how to clear the extended statistics for an interface by
259 * name and software index (where 2 is the software index):
260 * @cliexcmd{clear hardware-interfaces GigabitEthernet7/0/0 2}
263 VLIB_CLI_COMMAND (clear_hw_interface_counters_command, static) = {
264 .path = "clear hardware-interfaces",
265 .short_help = "clear hardware-interfaces "
266 "[<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]]",
267 .function = clear_hw_interfaces,
272 sw_interface_name_compare (void *a1, void *a2)
274 vnet_sw_interface_t *si1 = a1;
275 vnet_sw_interface_t *si2 = a2;
277 return vnet_sw_interface_compare (vnet_get_main (),
278 si1->sw_if_index, si2->sw_if_index);
281 static clib_error_t *
282 show_sw_interfaces (vlib_main_t * vm,
283 unformat_input_t * input, vlib_cli_command_t * cmd)
285 clib_error_t *error = 0;
286 vnet_main_t *vnm = vnet_get_main ();
287 unformat_input_t _linput, *linput = &_linput;
288 vnet_interface_main_t *im = &vnm->interface_main;
289 vnet_sw_interface_t *si, *sorted_sis = 0;
290 u32 sw_if_index = ~(u32) 0;
291 u8 show_addresses = 0;
292 u8 show_features = 0;
298 * Get a line of input. Won't work if the user typed
299 * "show interface" and nothing more.
301 if (unformat_user (input, unformat_line_input, linput))
303 while (unformat_check_input (linput) != UNFORMAT_END_OF_INPUT)
305 /* See if user wants to show specific interface */
307 (linput, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
309 si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
310 vec_add1 (sorted_sis, si[0]);
312 else if (unformat (linput, "address") || unformat (linput, "addr"))
314 else if (unformat (linput, "features") || unformat (linput, "feat"))
316 else if (unformat (linput, "tag"))
318 else if (unformat (linput, "vtr"))
320 else if (unformat (linput, "verbose"))
324 vec_free (sorted_sis);
325 error = clib_error_return (0, "unknown input `%U'",
326 format_unformat_error, linput);
330 unformat_free (linput);
332 if (show_features || show_tag || show_vtr)
334 if (sw_if_index == ~(u32) 0)
336 vec_free (sorted_sis);
337 return clib_error_return (0, "Interface not specified...");
343 vnet_interface_features_show (vm, sw_if_index, verbose);
344 vlib_cli_output (vm, "%U", format_l2_input_features, sw_if_index, 1);
346 l2_output_config_t *l2_output = l2output_intf_config (sw_if_index);
347 vlib_cli_output (vm, "\nl2-output:");
348 if (l2_output->out_vtr_flag)
349 vlib_cli_output (vm, "%10s (%s)", "VTR", "--internal--");
350 vlib_cli_output (vm, "%U", format_l2_output_features,
351 l2_output->feature_bitmap, 1);
352 vec_free (sorted_sis);
358 tag = vnet_get_sw_interface_tag (vnm, sw_if_index);
359 vlib_cli_output (vm, "%U: %s",
360 format_vnet_sw_if_index_name, vnm, sw_if_index,
361 tag ? (char *) tag : "(none)");
362 vec_free (sorted_sis);
367 * Show vlan tag rewrite data for one interface.
371 u32 vtr_op = L2_VTR_DISABLED;
372 u32 push_dot1q = 0, tag1 = 0, tag2 = 0;
374 if (l2vtr_get (vm, vnm, sw_if_index,
375 &vtr_op, &push_dot1q, &tag1, &tag2) != 0)
377 vlib_cli_output (vm, "%U: Problem getting vlan tag-rewrite data",
378 format_vnet_sw_if_index_name, vnm, sw_if_index);
381 vlib_cli_output (vm, "%U: VTR %0U",
382 format_vnet_sw_if_index_name, vnm, sw_if_index,
383 format_vtr, vtr_op, push_dot1q, tag1, tag2);
388 vlib_cli_output (vm, "%U\n", format_vnet_sw_interface, vnm, 0);
390 if (vec_len (sorted_sis) == 0) /* Get all interfaces */
392 /* Gather interfaces. */
394 vec_new (vnet_sw_interface_t, pool_elts (im->sw_interfaces));
395 _vec_len (sorted_sis) = 0;
397 pool_foreach (si, im->sw_interfaces)
399 int visible = vnet_swif_is_api_visible (si);
401 vec_add1 (sorted_sis, si[0]);
405 vec_sort_with_function (sorted_sis, sw_interface_name_compare);
410 vec_foreach (si, sorted_sis)
412 ip4_main_t *im4 = &ip4_main;
413 ip6_main_t *im6 = &ip6_main;
414 ip_lookup_main_t *lm4 = &im4->lookup_main;
415 ip_lookup_main_t *lm6 = &im6->lookup_main;
416 ip_interface_address_t *ia = 0;
417 u32 fib_index4 = 0, fib_index6 = 0;
419 if (vec_len (im4->fib_index_by_sw_if_index) > si->sw_if_index)
420 fib_index4 = vec_elt (im4->fib_index_by_sw_if_index,
423 if (vec_len (im6->fib_index_by_sw_if_index) > si->sw_if_index)
424 fib_index6 = vec_elt (im6->fib_index_by_sw_if_index,
427 ip4_fib_t *fib4 = ip4_fib_get (fib_index4);
428 ip6_fib_t *fib6 = ip6_fib_get (fib_index6);
430 if (si->flags & VNET_SW_INTERFACE_FLAG_UNNUMBERED)
432 (vm, "%U (%s): \n unnumbered, use %U",
433 format_vnet_sw_if_index_name, vnm, si->sw_if_index,
434 (si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ? "up" : "dn",
435 format_vnet_sw_if_index_name, vnm, si->unnumbered_sw_if_index);
439 format_vnet_sw_if_index_name, vnm, si->sw_if_index,
440 (si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ? "up" : "dn");
442 /* Display any L2 info */
443 vlib_cli_output (vm, "%U", format_l2_input, si->sw_if_index);
446 /* Display any IP4 addressing info */
447 foreach_ip_interface_address (lm4, ia, si->sw_if_index,
448 1 /* honor unnumbered */,
450 ip4_address_t *r4 = ip_interface_address_get_address (lm4, ia);
452 vlib_cli_output (vm, " L3 %U/%d ip4 table-id %d fib-idx %d",
453 format_ip4_address, r4, ia->address_length,
455 ip4_fib_index_from_table_id (fib4->table_id));
457 vlib_cli_output (vm, " L3 %U/%d",
458 format_ip4_address, r4, ia->address_length);
463 /* Display any IP6 addressing info */
464 foreach_ip_interface_address (lm6, ia, si->sw_if_index,
465 1 /* honor unnumbered */,
467 ip6_address_t *r6 = ip_interface_address_get_address (lm6, ia);
469 vlib_cli_output (vm, " L3 %U/%d ip6 table-id %d fib-idx %d",
470 format_ip6_address, r6, ia->address_length,
472 ip6_fib_index_from_table_id (fib6->table_id));
474 vlib_cli_output (vm, " L3 %U/%d",
475 format_ip6_address, r6, ia->address_length);
482 vec_foreach (si, sorted_sis)
484 vlib_cli_output (vm, "%U\n", format_vnet_sw_interface, vnm, si);
489 vec_free (sorted_sis);
494 VLIB_CLI_COMMAND (show_sw_interfaces_command, static) = {
495 .path = "show interface",
496 .short_help = "show interface [address|addr|features|feat|vtr] [<interface> [<interface> [..]]] [verbose]",
497 .function = show_sw_interfaces,
502 /* Root of all interface commands. */
504 VLIB_CLI_COMMAND (vnet_cli_interface_command, static) = {
506 .short_help = "Interface commands",
511 VLIB_CLI_COMMAND (vnet_cli_set_interface_command, static) = {
512 .path = "set interface",
513 .short_help = "Interface commands",
517 static clib_error_t *
518 clear_interface_counters (vlib_main_t * vm,
519 unformat_input_t * input, vlib_cli_command_t * cmd)
521 vnet_main_t *vnm = vnet_get_main ();
522 vnet_interface_main_t *im = &vnm->interface_main;
523 vlib_simple_counter_main_t *sm;
524 vlib_combined_counter_main_t *cm;
527 n_counters = vec_len (im->combined_sw_if_counters);
529 for (j = 0; j < n_counters; j++)
531 im = &vnm->interface_main;
532 cm = im->combined_sw_if_counters + j;
533 vlib_clear_combined_counters (cm);
536 n_counters = vec_len (im->sw_if_counters);
538 for (j = 0; j < n_counters; j++)
540 im = &vnm->interface_main;
541 sm = im->sw_if_counters + j;
542 vlib_clear_simple_counters (sm);
549 * Clear the statistics for all interfaces (statistics associated with the
550 * '<em>show interface</em>' command).
553 * Example of how to clear the statistics for all interfaces:
554 * @cliexcmd{clear interfaces}
557 VLIB_CLI_COMMAND (clear_interface_counters_command, static) = {
558 .path = "clear interfaces",
559 .short_help = "clear interfaces",
560 .function = clear_interface_counters,
565 * Parse subinterface names.
567 * The following subinterface syntax is supported. The first two are for
568 * backwards compatability:
571 * - a subinterface with the name <intf-name>.<id>. The subinterface
572 * is a single dot1q vlan with vlan id <id> and exact-match semantics.
574 * <intf-name> <min_id>-<max_id>
575 * - a set of the above subinterfaces, repeating for each id
576 * in the range <min_id> to <max_id>
578 * In the following, exact-match semantics (i.e. the number of vlan tags on the
579 * packet must match the number of tags in the configuration) are used only if
580 * the keyword exact-match is present. Non-exact match is the default.
582 * <intf-name> <id> dot1q <outer_id> [exact-match]
583 * - a subinterface with the name <intf-name>.<id>. The subinterface
584 * is a single dot1q vlan with vlan id <outer_id>.
586 * <intf-name> <id> dot1q any [exact-match]
587 * - a subinterface with the name <intf-name>.<id>. The subinterface
588 * is a single dot1q vlan with any vlan id.
590 * <intf-name> <id> dot1q <outer_id> inner-dot1q <inner_id> [exact-match]
591 * - a subinterface with the name <intf-name>.<id>. The subinterface
592 * is a double dot1q vlan with outer vlan id <outer_id> and inner vlan id
595 * <intf-name> <id> dot1q <outer_id> inner-dot1q any [exact-match]
596 * - a subinterface with the name <intf-name>.<id>. The subinterface
597 * is a double dot1q vlan with outer vlan id <id> and any inner vlan id.
599 * <intf-name> <id> dot1q any inner-dot1q any [exact-match]
601 * - a subinterface with the name <intf-name>.<id>. The subinterface
602 * is a double dot1q vlan with any outer vlan id and any inner vlan id.
604 * For each of the above CLI, there is a duplicate that uses the keyword
605 * "dot1ad" in place of the first "dot1q". These interfaces use ethertype
606 * 0x88ad in place of 0x8100 for the outer ethertype. Note that for double-
607 * tagged packets the inner ethertype is always 0x8100. Also note that
608 * the dot1q and dot1ad naming spaces are independent, so it is legal to
609 * have both "Gig3/0/0.1 dot1q 100" and "Gig3/0/0.2 dot1ad 100". For example:
611 * <intf-name> <id> dot1ad <outer_id> inner-dot1q <inner_id> [exact-match]
612 * - a subinterface with the name <intf-name>.<id>. The subinterface
613 * is a double dot1ad vlan with outer vlan id <outer_id> and inner vlan
616 * <intf-name> <id> untagged
617 * - a subinterface with the name <intf-name>.<id>. The subinterface
618 * has no vlan tags. Only one can be specified per interface.
620 * <intf-name> <id> default
621 * - a subinterface with the name <intf-name>.<id>. This is associated
622 * with a packet that did not match any other configured subinterface
623 * on this interface. Only one can be specified per interface.
626 static clib_error_t *
627 parse_vlan_sub_interfaces (unformat_input_t * input,
628 vnet_sw_interface_t * template)
630 clib_error_t *error = 0;
631 u32 inner_vlan, outer_vlan;
633 if (unformat (input, "any inner-dot1q any"))
635 template->sub.eth.flags.two_tags = 1;
636 template->sub.eth.flags.outer_vlan_id_any = 1;
637 template->sub.eth.flags.inner_vlan_id_any = 1;
639 else if (unformat (input, "any"))
641 template->sub.eth.flags.one_tag = 1;
642 template->sub.eth.flags.outer_vlan_id_any = 1;
644 else if (unformat (input, "%d inner-dot1q any", &outer_vlan))
646 template->sub.eth.flags.two_tags = 1;
647 template->sub.eth.flags.inner_vlan_id_any = 1;
648 template->sub.eth.outer_vlan_id = outer_vlan;
650 else if (unformat (input, "%d inner-dot1q %d", &outer_vlan, &inner_vlan))
652 template->sub.eth.flags.two_tags = 1;
653 template->sub.eth.outer_vlan_id = outer_vlan;
654 template->sub.eth.inner_vlan_id = inner_vlan;
656 else if (unformat (input, "%d", &outer_vlan))
658 template->sub.eth.flags.one_tag = 1;
659 template->sub.eth.outer_vlan_id = outer_vlan;
663 error = clib_error_return (0, "expected dot1q config, got `%U'",
664 format_unformat_error, input);
668 if (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
670 if (unformat (input, "exact-match"))
672 template->sub.eth.flags.exact_match = 1;
680 static clib_error_t *
681 create_sub_interfaces (vlib_main_t * vm,
682 unformat_input_t * input, vlib_cli_command_t * cmd)
684 vnet_main_t *vnm = vnet_get_main ();
685 clib_error_t *error = 0;
686 u32 hw_if_index, sw_if_index;
687 vnet_hw_interface_t *hi;
688 u32 id, id_min, id_max;
689 vnet_sw_interface_t template;
692 if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
694 error = clib_error_return (0, "unknown interface `%U'",
695 format_unformat_error, input);
699 clib_memset (&template, 0, sizeof (template));
700 template.sub.eth.raw_flags = 0;
702 if (unformat (input, "%d default", &id_min))
705 template.sub.eth.flags.default_sub = 1;
707 else if (unformat (input, "%d untagged", &id_min))
710 template.sub.eth.flags.no_tags = 1;
711 template.sub.eth.flags.exact_match = 1;
713 else if (unformat (input, "%d dot1q", &id_min))
715 /* parse dot1q config */
717 error = parse_vlan_sub_interfaces (input, &template);
721 else if (unformat (input, "%d dot1ad", &id_min))
723 /* parse dot1ad config */
725 template.sub.eth.flags.dot1ad = 1;
726 error = parse_vlan_sub_interfaces (input, &template);
730 else if (unformat (input, "%d-%d", &id_min, &id_max))
732 template.sub.eth.flags.one_tag = 1;
733 template.sub.eth.flags.exact_match = 1;
737 else if (unformat (input, "%d", &id_min))
740 template.sub.eth.flags.one_tag = 1;
741 template.sub.eth.outer_vlan_id = id_min;
742 template.sub.eth.flags.exact_match = 1;
747 error = clib_error_return (0, "expected ID or ID MIN-MAX, got `%U'",
748 format_unformat_error, input);
752 hi = vnet_get_hw_interface (vnm, hw_if_index);
754 if (hi->bond_info == VNET_HW_INTERFACE_BOND_INFO_SLAVE)
757 clib_error_return (0,
758 "not allowed as %v belong to a BondEthernet interface",
763 for (id = id_min; id <= id_max; id++)
766 vnet_interface_main_t *im = &vnm->interface_main;
767 u64 sup_and_sub_key = ((u64) (hi->sw_if_index) << 32) | (u64) id;
770 p = hash_get_mem (im->sw_if_index_by_sup_and_sub, &sup_and_sub_key);
774 clib_warning ("sup sw_if_index %d, sub id %d already exists\n",
775 hi->sw_if_index, id);
779 template.type = VNET_SW_INTERFACE_TYPE_SUB;
780 template.flood_class = VNET_FLOOD_CLASS_NORMAL;
781 template.sup_sw_if_index = hi->sw_if_index;
782 template.sub.id = id;
784 template.sub.eth.outer_vlan_id = id;
786 error = vnet_create_sw_interface (vnm, &template, &sw_if_index);
790 kp = clib_mem_alloc (sizeof (*kp));
791 *kp = sup_and_sub_key;
793 hash_set (hi->sub_interface_sw_if_index_by_id, id, sw_if_index);
794 hash_set_mem (im->sw_if_index_by_sup_and_sub, kp, sw_if_index);
795 vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name,
796 vnet_get_main (), sw_if_index);
804 * This command is used to add VLAN IDs to interfaces, also known as subinterfaces.
805 * The primary input to this command is the '<em>interface</em>' and '<em>subId</em>'
806 * (subinterface Id) parameters. If no additional VLAN ID is provide, the VLAN ID is
807 * assumed to be the '<em>subId</em>'. The VLAN ID and '<em>subId</em>' can be different,
808 * but this is not recommended.
810 * This command has several variations:
811 * - <b>create sub-interfaces <interface> <subId></b> - Create a subinterface to
812 * process packets with a given 802.1q VLAN ID (same value as the '<em>subId</em>').
814 * - <b>create sub-interfaces <interface> <subId> default</b> - Adding the
815 * '<em>default</em>' parameter indicates that packets with VLAN IDs that do not
816 * match any other subinterfaces should be sent to this subinterface.
818 * - <b>create sub-interfaces <interface> <subId> untagged</b> - Adding the
819 * '<em>untagged</em>' parameter indicates that packets no VLAN IDs should be sent
820 * to this subinterface.
822 * - <b>create sub-interfaces <interface> <subId>-<subId></b> - Create a range of
823 * subinterfaces to handle a range of VLAN IDs.
825 * - <b>create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any [exact-match]</b> -
826 * Use this command to specify the outer VLAN ID, to either be explicit or to make the
827 * VLAN ID different from the '<em>subId</em>'.
829 * - <b>create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any inner-dot1q
830 * <vlanId>|any [exact-match]</b> - Use this command to specify the outer VLAN ID and
833 * When '<em>dot1q</em>' or '<em>dot1ad</em>' is explicitly entered, subinterfaces
834 * can be configured as either exact-match or non-exact match. Non-exact match is the CLI
835 * default. If '<em>exact-match</em>' is specified, packets must have the same number of
836 * VLAN tags as the configuration. For non-exact-match, packets must at least that number
837 * of tags. L3 (routed) interfaces must be configured as exact-match. L2 interfaces are
838 * typically configured as non-exact-match. If '<em>dot1q</em>' or '<em>dot1ad</em>' is NOT
839 * entered, then the default behavior is exact-match.
841 * Use the '<em>show interface</em>' command to display all subinterfaces.
845 * Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
846 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11}
848 * The previous example is shorthand and is equivalent to:
849 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match}
852 * Example of how to create a subinterface number that is different from the VLAN ID:
853 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100}
856 * Examples of how to create q-in-q and q-in-any subinterfaces:
857 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200}
858 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any}
860 * Examples of how to create dot1ad interfaces:
861 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11}
862 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200}
865 * Examples of '<em>exact-match</em>' versus non-exact match. A packet with
866 * outer VLAN 100 and inner VLAN 200 would match this interface, because the default
867 * is non-exact match:
868 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100}
870 * However, the same packet would NOT match this interface because '<em>exact-match</em>'
871 * is specified and only one VLAN is configured, but packet contains two VLANs:
872 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match}
875 * Example of how to created a subinterface to process untagged packets:
876 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 5 untagged}
878 * Example of how to created a subinterface to process any packet with a VLAN ID that
879 * does not match any other subinterface:
880 * @cliexcmd{create sub-interfaces GigabitEthernet2/0/0 7 default}
882 * When subinterfaces are created, they are in the down state. Example of how to
883 * enable a newly created subinterface:
884 * @cliexcmd{set interface GigabitEthernet2/0/0.7 up}
888 VLIB_CLI_COMMAND (create_sub_interfaces_command, static) = {
889 .path = "create sub-interfaces",
890 .short_help = "create sub-interfaces <interface> "
891 "{<subId> [default|untagged]} | "
892 "{<subId>-<subId>} | "
893 "{<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}",
894 .function = create_sub_interfaces,
898 static clib_error_t *
899 set_state (vlib_main_t * vm,
900 unformat_input_t * input, vlib_cli_command_t * cmd)
902 vnet_main_t *vnm = vnet_get_main ();
904 u32 sw_if_index, flags;
907 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
909 error = clib_error_return (0, "unknown interface `%U'",
910 format_unformat_error, input);
914 if (!unformat (input, "%U", unformat_vnet_sw_interface_flags, &flags))
916 error = clib_error_return (0, "unknown flags `%U'",
917 format_unformat_error, input);
921 error = vnet_sw_interface_set_flags (vnm, sw_if_index, flags);
931 * This command is used to change the admin state (up/down) of an interface.
933 * If an interface is down, the optional '<em>punt</em>' flag can also be set.
934 * The '<em>punt</em>' flag implies the interface is disabled for forwarding
935 * but punt all traffic to slow-path. Use the '<em>enable</em>' flag to clear
936 * '<em>punt</em>' flag (interface is still down).
939 * Example of how to configure the admin state of an interface to '<em>up</em?':
940 * @cliexcmd{set interface state GigabitEthernet2/0/0 up}
941 * Example of how to configure the admin state of an interface to '<em>down</em?':
942 * @cliexcmd{set interface state GigabitEthernet2/0/0 down}
945 VLIB_CLI_COMMAND (set_state_command, static) = {
946 .path = "set interface state",
947 .short_help = "set interface state <interface> [up|down|punt|enable]",
948 .function = set_state,
952 static clib_error_t *
953 set_unnumbered (vlib_main_t * vm,
954 unformat_input_t * input, vlib_cli_command_t * cmd)
956 vnet_main_t *vnm = vnet_get_main ();
957 u32 unnumbered_sw_if_index = ~0;
958 u32 inherit_from_sw_if_index = ~0;
961 if (unformat (input, "%U use %U",
962 unformat_vnet_sw_interface, vnm, &unnumbered_sw_if_index,
963 unformat_vnet_sw_interface, vnm, &inherit_from_sw_if_index))
965 else if (unformat (input, "del %U",
966 unformat_vnet_sw_interface, vnm,
967 &unnumbered_sw_if_index))
970 return clib_error_return (0, "parse error '%U'",
971 format_unformat_error, input);
973 if (~0 == unnumbered_sw_if_index)
974 return clib_error_return (0, "Specify the unnumbered interface");
975 if (enable && ~0 == inherit_from_sw_if_index)
976 return clib_error_return (0, "When enabling unnumbered specify the"
977 " IP enabled interface that it uses");
979 int rv = vnet_sw_interface_update_unnumbered (
980 unnumbered_sw_if_index, inherit_from_sw_if_index, enable);
987 case VNET_API_ERROR_UNEXPECTED_INTF_STATE:
988 return clib_error_return (
990 "When enabling unnumbered both interfaces must be in the same tables");
993 return clib_error_return (
994 0, "vnet_sw_interface_update_unnumbered returned %d", rv);
1001 VLIB_CLI_COMMAND (set_unnumbered_command, static) = {
1002 .path = "set interface unnumbered",
1003 .short_help = "set interface unnumbered [<interface> use <interface> | del <interface>]",
1004 .function = set_unnumbered,
1010 static clib_error_t *
1011 set_hw_class (vlib_main_t * vm,
1012 unformat_input_t * input, vlib_cli_command_t * cmd)
1014 vnet_main_t *vnm = vnet_get_main ();
1015 vnet_interface_main_t *im = &vnm->interface_main;
1016 clib_error_t *error;
1017 u32 hw_if_index, hw_class_index;
1020 if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
1022 error = clib_error_return (0, "unknown hardware interface `%U'",
1023 format_unformat_error, input);
1027 if (!unformat_user (input, unformat_hash_string,
1028 im->hw_interface_class_by_name, &hw_class_index))
1030 error = clib_error_return (0, "unknown hardware class `%U'",
1031 format_unformat_error, input);
1035 error = vnet_hw_interface_set_class (vnm, hw_if_index, hw_class_index);
1044 VLIB_CLI_COMMAND (set_hw_class_command, static) = {
1045 .path = "set interface hw-class",
1046 .short_help = "Set interface hardware class",
1047 .function = set_hw_class,
1051 static clib_error_t *
1052 vnet_interface_cli_init (vlib_main_t * vm)
1057 VLIB_INIT_FUNCTION (vnet_interface_cli_init);
1059 static clib_error_t *
1060 renumber_interface_command_fn (vlib_main_t * vm,
1061 unformat_input_t * input,
1062 vlib_cli_command_t * cmd)
1065 u32 new_dev_instance;
1066 vnet_main_t *vnm = vnet_get_main ();
1069 if (!unformat_user (input, unformat_vnet_hw_interface, vnm, &hw_if_index))
1070 return clib_error_return (0, "unknown hardware interface `%U'",
1071 format_unformat_error, input);
1073 if (!unformat (input, "%d", &new_dev_instance))
1074 return clib_error_return (0, "new dev instance missing");
1076 rv = vnet_interface_name_renumber (hw_if_index, new_dev_instance);
1084 return clib_error_return (0, "vnet_interface_name_renumber returned %d",
1094 VLIB_CLI_COMMAND (renumber_interface_command, static) = {
1095 .path = "renumber interface",
1096 .short_help = "renumber interface <interface> <new-dev-instance>",
1097 .function = renumber_interface_command_fn,
1101 static clib_error_t *
1102 promiscuous_cmd (vlib_main_t * vm,
1103 unformat_input_t * input, vlib_cli_command_t * cmd)
1105 vnet_main_t *vnm = vnet_get_main ();
1107 u32 flags = ETHERNET_INTERFACE_FLAG_ACCEPT_ALL;
1108 ethernet_main_t *em = ðernet_main;
1109 ethernet_interface_t *eif;
1111 if (unformat (input, "on %U",
1112 unformat_vnet_hw_interface, vnm, &hw_if_index))
1114 else if (unformat (input, "off %U",
1115 unformat_ethernet_interface, vnm, &hw_if_index))
1118 return clib_error_return (0, "unknown input `%U'",
1119 format_unformat_error, input);
1121 eif = ethernet_get_interface (em, hw_if_index);
1123 return clib_error_return (0, "not supported");
1125 ethernet_set_flags (vnm, hw_if_index, flags);
1130 VLIB_CLI_COMMAND (set_interface_promiscuous_cmd, static) = {
1131 .path = "set interface promiscuous",
1132 .short_help = "set interface promiscuous [on|off] <interface>",
1133 .function = promiscuous_cmd,
1137 static clib_error_t *
1138 mtu_cmd (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
1140 vnet_main_t *vnm = vnet_get_main ();
1141 u32 hw_if_index, sw_if_index, mtu;
1142 ethernet_main_t *em = ðernet_main;
1143 u32 mtus[VNET_N_MTU] = { 0, 0, 0, 0 };
1145 if (unformat (input, "%d %U", &mtu,
1146 unformat_vnet_hw_interface, vnm, &hw_if_index))
1149 * Change physical MTU on interface. Only supported for Ethernet
1152 vnet_hw_interface_t *hi = vnet_get_hw_interface (vnm, hw_if_index);
1153 ethernet_interface_t *eif = ethernet_get_interface (em, hw_if_index);
1156 return clib_error_return (0, "not supported");
1158 if (mtu < hi->min_supported_packet_bytes)
1159 return clib_error_return (0, "Invalid mtu (%d): "
1160 "must be >= min pkt bytes (%d)", mtu,
1161 hi->min_supported_packet_bytes);
1163 if (mtu > hi->max_supported_packet_bytes)
1164 return clib_error_return (0, "Invalid mtu (%d): must be <= (%d)", mtu,
1165 hi->max_supported_packet_bytes);
1167 vnet_hw_interface_set_mtu (vnm, hw_if_index, mtu);
1170 else if (unformat (input, "packet %d %U", &mtu,
1171 unformat_vnet_sw_interface, vnm, &sw_if_index))
1172 /* Set default packet MTU (including L3 header */
1173 mtus[VNET_MTU_L3] = mtu;
1174 else if (unformat (input, "ip4 %d %U", &mtu,
1175 unformat_vnet_sw_interface, vnm, &sw_if_index))
1176 mtus[VNET_MTU_IP4] = mtu;
1177 else if (unformat (input, "ip6 %d %U", &mtu,
1178 unformat_vnet_sw_interface, vnm, &sw_if_index))
1179 mtus[VNET_MTU_IP6] = mtu;
1180 else if (unformat (input, "mpls %d %U", &mtu,
1181 unformat_vnet_sw_interface, vnm, &sw_if_index))
1182 mtus[VNET_MTU_MPLS] = mtu;
1184 return clib_error_return (0, "unknown input `%U'",
1185 format_unformat_error, input);
1187 vnet_sw_interface_set_protocol_mtu (vnm, sw_if_index, mtus);
1194 VLIB_CLI_COMMAND (set_interface_mtu_cmd, static) = {
1195 .path = "set interface mtu",
1196 .short_help = "set interface mtu [packet|ip4|ip6|mpls] <value> <interface>",
1197 .function = mtu_cmd,
1201 static clib_error_t *
1202 show_interface_sec_mac_addr_fn (vlib_main_t * vm, unformat_input_t * input,
1203 vlib_cli_command_t * cmd)
1205 vnet_main_t *vnm = vnet_get_main ();
1206 vnet_interface_main_t *im = &vnm->interface_main;
1207 ethernet_main_t *em = ðernet_main;
1208 u32 sw_if_index = ~0;
1209 vnet_sw_interface_t *si, *sorted_sis = 0;
1211 if (unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
1213 si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
1214 vec_add1 (sorted_sis, si[0]);
1217 /* if an interface name was not passed, get all interfaces */
1218 if (vec_len (sorted_sis) == 0)
1221 vec_new (vnet_sw_interface_t, pool_elts (im->sw_interfaces));
1222 _vec_len (sorted_sis) = 0;
1224 pool_foreach (si, im->sw_interfaces)
1226 int visible = vnet_swif_is_api_visible (si);
1228 vec_add1 (sorted_sis, si[0]);
1232 vec_sort_with_function (sorted_sis, sw_interface_name_compare);
1235 vec_foreach (si, sorted_sis)
1237 vnet_sw_interface_t *sup_si;
1238 ethernet_interface_t *ei;
1240 sup_si = vnet_get_sup_sw_interface (vnm, si->sw_if_index);
1241 ei = ethernet_get_interface (em, sup_si->hw_if_index);
1243 vlib_cli_output (vm, "%U (%s):",
1244 format_vnet_sw_if_index_name, vnm, si->sw_if_index,
1245 (si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ?
1248 if (ei && ei->secondary_addrs)
1250 ethernet_interface_address_t *sec_addr;
1252 vec_foreach (sec_addr, ei->secondary_addrs)
1254 vlib_cli_output (vm, " %U", format_mac_address_t, &sec_addr->mac);
1259 vec_free (sorted_sis);
1264 * This command is used to display interface secondary mac addresses.
1267 * Example of how to display interface secondary mac addresses:
1268 * @cliexstart{show interface secondary-mac-address}
1272 VLIB_CLI_COMMAND (show_interface_sec_mac_addr, static) = {
1273 .path = "show interface secondary-mac-address",
1274 .short_help = "show interface secondary-mac-address [<interface>]",
1275 .function = show_interface_sec_mac_addr_fn,
1279 static clib_error_t *
1280 interface_add_del_mac_address (vlib_main_t * vm, unformat_input_t * input,
1281 vlib_cli_command_t * cmd)
1283 vnet_main_t *vnm = vnet_get_main ();
1284 vnet_sw_interface_t *si = NULL;
1285 clib_error_t *error = 0;
1286 u32 sw_if_index = ~0;
1290 is_add = is_del = 0;
1292 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
1294 error = clib_error_return (0, "unknown interface `%U'",
1295 format_unformat_error, input);
1298 if (!unformat_user (input, unformat_ethernet_address, mac))
1300 error = clib_error_return (0, "expected mac address `%U'",
1301 format_unformat_error, input);
1305 while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
1307 if (unformat (input, "add"))
1309 else if (unformat (input, "del"))
1315 if (is_add == is_del)
1317 error = clib_error_return (0, "must choose one of add or del");
1321 si = vnet_get_sw_interface (vnm, sw_if_index);
1323 vnet_hw_interface_add_del_mac_address (vnm, si->hw_if_index, mac, is_add);
1330 * The '<em>set interface secondary-mac-address </em>' command allows adding
1331 * or deleting extra MAC addresses on a given interface without changing the
1332 * default MAC address. This could allow packets sent to these MAC addresses
1333 * to be received without setting the interface to promiscuous mode.
1334 * Not all interfaces support this operation. The ones that do are mostly
1335 * hardware NICs, though virtio does also.
1339 * Example of how to add a secondary MAC Address on an interface:
1340 * @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 add}
1341 * Example of how to delete a secondary MAC address from an interface:
1342 * @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 del}
1346 VLIB_CLI_COMMAND (interface_add_del_mac_address_cmd, static) = {
1347 .path = "set interface secondary-mac-address",
1348 .short_help = "set interface secondary-mac-address <interface> <mac-address> [(add|del)]",
1349 .function = interface_add_del_mac_address,
1353 static clib_error_t *
1354 set_interface_mac_address (vlib_main_t * vm, unformat_input_t * input,
1355 vlib_cli_command_t * cmd)
1357 vnet_main_t *vnm = vnet_get_main ();
1358 vnet_sw_interface_t *si = NULL;
1359 clib_error_t *error = 0;
1360 u32 sw_if_index = ~0;
1363 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
1365 error = clib_error_return (0, "unknown interface `%U'",
1366 format_unformat_error, input);
1369 if (!unformat_user (input, unformat_ethernet_address, mac))
1371 error = clib_error_return (0, "expected mac address `%U'",
1372 format_unformat_error, input);
1375 si = vnet_get_sw_interface (vnm, sw_if_index);
1376 error = vnet_hw_interface_change_mac_address (vnm, si->hw_if_index, mac);
1382 * The '<em>set interface mac address </em>' command allows to set MAC address of given interface.
1383 * In case of NIC interfaces the one has to support MAC address change. A side effect of MAC address
1384 * change are changes of MAC addresses in FIB tables (ipv4 and ipv6).
1388 * Example of how to change MAC Address of interface:
1389 * @cliexcmd{set interface mac address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01}
1390 * @cliexcmd{set interface mac address host-vpp0 aa:bb:cc:dd:ee:02}
1391 * @cliexcmd{set interface mac address tap-0 aa:bb:cc:dd:ee:03}
1392 * @cliexcmd{set interface mac address pg0 aa:bb:cc:dd:ee:04}
1396 VLIB_CLI_COMMAND (set_interface_mac_address_cmd, static) = {
1397 .path = "set interface mac address",
1398 .short_help = "set interface mac address <interface> <mac-address>",
1399 .function = set_interface_mac_address,
1403 static clib_error_t *
1404 set_tag (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
1406 vnet_main_t *vnm = vnet_get_main ();
1407 u32 sw_if_index = ~0;
1410 if (!unformat (input, "%U %s", unformat_vnet_sw_interface,
1411 vnm, &sw_if_index, &tag))
1412 return clib_error_return (0, "unknown input `%U'",
1413 format_unformat_error, input);
1415 vnet_set_sw_interface_tag (vnm, tag, sw_if_index);
1421 VLIB_CLI_COMMAND (set_tag_command, static) = {
1422 .path = "set interface tag",
1423 .short_help = "set interface tag <interface> <tag>",
1424 .function = set_tag,
1428 static clib_error_t *
1429 clear_tag (vlib_main_t * vm, unformat_input_t * input,
1430 vlib_cli_command_t * cmd)
1432 vnet_main_t *vnm = vnet_get_main ();
1433 u32 sw_if_index = ~0;
1435 if (!unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
1436 return clib_error_return (0, "unknown input `%U'",
1437 format_unformat_error, input);
1439 vnet_clear_sw_interface_tag (vnm, sw_if_index);
1445 VLIB_CLI_COMMAND (clear_tag_command, static) = {
1446 .path = "clear interface tag",
1447 .short_help = "clear interface tag <interface>",
1448 .function = clear_tag,
1452 static clib_error_t *
1453 set_ip_directed_broadcast (vlib_main_t * vm,
1454 unformat_input_t * input, vlib_cli_command_t * cmd)
1456 vnet_main_t *vnm = vnet_get_main ();
1457 u32 sw_if_index = ~0;
1460 if (!unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index));
1461 else if (unformat (input, "enable"))
1463 else if (unformat (input, "disable"))
1466 return clib_error_return (0, "unknown input: `%U'",
1467 format_unformat_error, input);
1469 if (~0 == sw_if_index)
1470 return clib_error_return (0, "specify an interface: `%U'",
1471 format_unformat_error, input);
1473 vnet_sw_interface_ip_directed_broadcast (vnm, sw_if_index, enable);
1479 * This command is used to enable/disable IP directed broadcast
1480 * If directed broadcast is enabled a packet sent to the interface's
1481 * subnet broadcast address will be sent L2 broadcast on the interface,
1482 * otherwise it is dropped.
1485 VLIB_CLI_COMMAND (set_ip_directed_broadcast_command, static) = {
1486 .path = "set interface ip directed-broadcast",
1487 .short_help = "set interface enable <interface> <enable|disable>",
1488 .function = set_ip_directed_broadcast,
1493 set_hw_interface_change_rx_mode (vnet_main_t * vnm, u32 hw_if_index,
1494 u8 queue_id_valid, u32 queue_id,
1495 vnet_hw_if_rx_mode mode)
1497 clib_error_t *error = 0;
1498 vnet_hw_interface_t *hw;
1499 u32 *queue_indices = 0;
1501 hw = vnet_get_hw_interface (vnm, hw_if_index);
1507 vnet_hw_if_get_rx_queue_index_by_id (vnm, hw_if_index, queue_id);
1508 if (queue_index == ~0)
1509 return clib_error_return (0, "unknown queue %u on interface %s",
1510 queue_id, hw->name);
1511 vec_add1 (queue_indices, queue_index);
1514 queue_indices = hw->rx_queue_indices;
1516 for (int i = 0; i < vec_len (queue_indices); i++)
1518 int rv = vnet_hw_if_set_rx_queue_mode (vnm, queue_indices[i], mode);
1524 if (queue_indices != hw->rx_queue_indices)
1525 vec_free (queue_indices);
1526 vnet_hw_if_update_runtime_data (vnm, hw_if_index);
1530 static clib_error_t *
1531 set_interface_rx_mode (vlib_main_t * vm, unformat_input_t * input,
1532 vlib_cli_command_t * cmd)
1534 clib_error_t *error = 0;
1535 unformat_input_t _line_input, *line_input = &_line_input;
1536 vnet_main_t *vnm = vnet_get_main ();
1537 u32 hw_if_index = (u32) ~ 0;
1538 u32 queue_id = (u32) ~ 0;
1539 vnet_hw_if_rx_mode mode = VNET_HW_IF_RX_MODE_UNKNOWN;
1540 u8 queue_id_valid = 0;
1542 if (!unformat_user (input, unformat_line_input, line_input))
1545 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
1548 (line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
1550 else if (unformat (line_input, "queue %d", &queue_id))
1552 else if (unformat (line_input, "polling"))
1553 mode = VNET_HW_IF_RX_MODE_POLLING;
1554 else if (unformat (line_input, "interrupt"))
1555 mode = VNET_HW_IF_RX_MODE_INTERRUPT;
1556 else if (unformat (line_input, "adaptive"))
1557 mode = VNET_HW_IF_RX_MODE_ADAPTIVE;
1560 error = clib_error_return (0, "parse error: '%U'",
1561 format_unformat_error, line_input);
1562 unformat_free (line_input);
1567 unformat_free (line_input);
1569 if (hw_if_index == (u32) ~ 0)
1570 return clib_error_return (0, "please specify valid interface name");
1572 if (mode == VNET_HW_IF_RX_MODE_UNKNOWN)
1573 return clib_error_return (0, "please specify valid rx-mode");
1575 error = set_hw_interface_change_rx_mode (vnm, hw_if_index, queue_id_valid,
1582 * This command is used to assign the RX packet processing mode (polling,
1583 * interrupt, adaptive) of the a given interface, and optionally a
1584 * given queue. If the '<em>queue</em>' is not provided, the '<em>mode</em>'
1585 * is applied to all queues of the interface. Not all interfaces support
1586 * all modes. To display the current rx-mode use the command
1587 * '<em>show interface rx-placement</em>'.
1590 * Example of how to assign rx-mode to all queues on an interface:
1591 * @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 polling}
1592 * Example of how to assign rx-mode to one queue of an interface:
1593 * @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 queue 0 interrupt}
1594 * Example of how to display the rx-mode of all interfaces:
1595 * @cliexstart{show interface rx-placement}
1596 * Thread 1 (vpp_wk_0):
1598 * GigabitEthernet7/0/0 queue 0 (polling)
1599 * node vhost-user-input:
1600 * VirtualEthernet0/0/12 queue 0 (interrupt)
1601 * VirtualEthernet0/0/12 queue 2 (polling)
1602 * VirtualEthernet0/0/13 queue 0 (polling)
1603 * VirtualEthernet0/0/13 queue 2 (polling)
1604 * Thread 2 (vpp_wk_1):
1606 * GigabitEthernet7/0/1 queue 0 (polling)
1607 * node vhost-user-input:
1608 * VirtualEthernet0/0/12 queue 1 (polling)
1609 * VirtualEthernet0/0/12 queue 3 (polling)
1610 * VirtualEthernet0/0/13 queue 1 (polling)
1611 * VirtualEthernet0/0/13 queue 3 (polling)
1615 VLIB_CLI_COMMAND (cmd_set_if_rx_mode,static) = {
1616 .path = "set interface rx-mode",
1617 .short_help = "set interface rx-mode <interface> [queue <n>] [polling | interrupt | adaptive]",
1618 .function = set_interface_rx_mode,
1622 static clib_error_t *
1623 show_interface_rx_placement_fn (vlib_main_t * vm, unformat_input_t * input,
1624 vlib_cli_command_t * cmd)
1627 vnet_main_t *vnm = vnet_get_main ();
1628 vnet_hw_if_rx_queue_t **all_queues = 0;
1629 vnet_hw_if_rx_queue_t **qptr;
1630 vnet_hw_if_rx_queue_t *q;
1631 pool_foreach (q, vnm->interface_main.hw_if_rx_queues)
1632 vec_add1 (all_queues, q);
1633 vec_sort_with_function (all_queues, vnet_hw_if_rxq_cmp_cli_api);
1636 vec_foreach (qptr, all_queues)
1638 u32 current_thread = qptr[0]->thread_index;
1639 u32 hw_if_index = qptr[0]->hw_if_index;
1640 vnet_hw_interface_t *hw_if = vnet_get_hw_interface (vnm, hw_if_index);
1641 u32 current_node = hw_if->input_node_index;
1642 if (current_node != prev_node)
1643 s = format (s, " node %U:\n", format_vlib_node_name, vm, current_node);
1644 s = format (s, " %U queue %u (%U)\n", format_vnet_sw_if_index_name,
1645 vnm, hw_if->sw_if_index, qptr[0]->queue_id,
1646 format_vnet_hw_if_rx_mode, qptr[0]->mode);
1647 if (qptr == all_queues + vec_len (all_queues) - 1 ||
1648 current_thread != qptr[1]->thread_index)
1650 vlib_cli_output (vm, "Thread %u (%s):\n%v", current_thread,
1651 vlib_worker_threads[current_thread].name, s);
1652 vec_reset_length (s);
1654 prev_node = current_node;
1657 vec_free (all_queues);
1662 * This command is used to display the interface and queue worker
1666 * Example of how to display the interface placement:
1667 * @cliexstart{show interface rx-placement}
1668 * Thread 1 (vpp_wk_0):
1670 * GigabitEthernet7/0/0 queue 0 (polling)
1671 * node vhost-user-input:
1672 * VirtualEthernet0/0/12 queue 0 (polling)
1673 * VirtualEthernet0/0/12 queue 2 (polling)
1674 * VirtualEthernet0/0/13 queue 0 (polling)
1675 * VirtualEthernet0/0/13 queue 2 (polling)
1676 * Thread 2 (vpp_wk_1):
1678 * GigabitEthernet7/0/1 queue 0 (polling)
1679 * node vhost-user-input:
1680 * VirtualEthernet0/0/12 queue 1 (polling)
1681 * VirtualEthernet0/0/12 queue 3 (polling)
1682 * VirtualEthernet0/0/13 queue 1 (polling)
1683 * VirtualEthernet0/0/13 queue 3 (polling)
1687 VLIB_CLI_COMMAND (show_interface_rx_placement, static) = {
1688 .path = "show interface rx-placement",
1689 .short_help = "show interface rx-placement",
1690 .function = show_interface_rx_placement_fn,
1694 set_hw_interface_rx_placement (u32 hw_if_index, u32 queue_id,
1695 u32 thread_index, u8 is_main)
1697 vnet_main_t *vnm = vnet_get_main ();
1698 vnet_device_main_t *vdm = &vnet_device_main;
1699 vnet_hw_interface_t *hw;
1705 thread_index += vdm->first_worker_thread_index;
1707 if (thread_index > vdm->last_worker_thread_index)
1708 return clib_error_return (0,
1709 "please specify valid worker thread or main");
1711 hw = vnet_get_hw_interface (vnm, hw_if_index);
1714 vnet_hw_if_get_rx_queue_index_by_id (vnm, hw_if_index, queue_id);
1715 if (queue_index == ~0)
1716 return clib_error_return (0, "unknown queue %u on interface %s", queue_id,
1718 vnet_hw_if_set_rx_queue_thread_index (vnm, queue_index, thread_index);
1719 vnet_hw_if_update_runtime_data (vnm, hw_if_index);
1723 static clib_error_t *
1724 set_interface_rx_placement (vlib_main_t *vm, unformat_input_t *input,
1725 vlib_cli_command_t *cmd)
1727 clib_error_t *error = 0;
1728 unformat_input_t _line_input, *line_input = &_line_input;
1729 vnet_main_t *vnm = vnet_get_main ();
1730 u32 hw_if_index = (u32) ~ 0;
1731 u32 queue_id = (u32) 0;
1732 u32 thread_index = (u32) ~ 0;
1735 if (!unformat_user (input, unformat_line_input, line_input))
1738 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
1741 (line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
1743 else if (unformat (line_input, "queue %d", &queue_id))
1745 else if (unformat (line_input, "main", &thread_index))
1747 else if (unformat (line_input, "worker %d", &thread_index))
1751 error = clib_error_return (0, "parse error: '%U'",
1752 format_unformat_error, line_input);
1753 unformat_free (line_input);
1758 unformat_free (line_input);
1760 if (hw_if_index == (u32) ~ 0)
1761 return clib_error_return (0, "please specify valid interface name");
1763 error = set_hw_interface_rx_placement (hw_if_index, queue_id, thread_index,
1770 * This command is used to assign a given interface, and optionally a
1771 * given queue, to a different thread. If the '<em>queue</em>' is not provided,
1772 * it defaults to 0. The '<em>worker</em>' parameter is zero based and the index
1773 * in the thread name, for example, 0 in the thread name '<em>vpp_wk_0</em>'.
1776 * Example of how to display the interface placement:
1777 * @cliexstart{show interface rx-placement}
1778 * Thread 1 (vpp_wk_0):
1780 * GigabitEthernet7/0/0 queue 0 (polling)
1781 * node vhost-user-input:
1782 * VirtualEthernet0/0/12 queue 0 (polling)
1783 * VirtualEthernet0/0/12 queue 2 (polling)
1784 * VirtualEthernet0/0/13 queue 0 (polling)
1785 * VirtualEthernet0/0/13 queue 2 (polling)
1786 * Thread 2 (vpp_wk_1):
1788 * GigabitEthernet7/0/1 queue 0 (polling)
1789 * node vhost-user-input:
1790 * VirtualEthernet0/0/12 queue 1 (polling)
1791 * VirtualEthernet0/0/12 queue 3 (polling)
1792 * VirtualEthernet0/0/13 queue 1 (polling)
1793 * VirtualEthernet0/0/13 queue 3 (polling)
1795 * Example of how to assign a interface and queue to a worker thread:
1796 * @cliexcmd{set interface rx-placement VirtualEthernet0/0/12 queue 1 worker 0}
1797 * Example of how to display the interface placement:
1798 * @cliexstart{show interface rx-placement}
1799 * Thread 1 (vpp_wk_0):
1801 * GigabitEthernet7/0/0 queue 0 (polling)
1802 * node vhost-user-input:
1803 * VirtualEthernet0/0/12 queue 0 (polling)
1804 * VirtualEthernet0/0/12 queue 1 (polling)
1805 * VirtualEthernet0/0/12 queue 2 (polling)
1806 * VirtualEthernet0/0/13 queue 0 (polling)
1807 * VirtualEthernet0/0/13 queue 2 (polling)
1808 * Thread 2 (vpp_wk_1):
1810 * GigabitEthernet7/0/1 queue 0 (polling)
1811 * node vhost-user-input:
1812 * VirtualEthernet0/0/12 queue 3 (polling)
1813 * VirtualEthernet0/0/13 queue 1 (polling)
1814 * VirtualEthernet0/0/13 queue 3 (polling)
1818 VLIB_CLI_COMMAND (cmd_set_if_rx_placement,static) = {
1819 .path = "set interface rx-placement",
1820 .short_help = "set interface rx-placement <interface> [queue <n>] "
1821 "[worker <n> | main]",
1822 .function = set_interface_rx_placement,
1828 set_hw_interface_tx_queue (u32 hw_if_index, u32 queue_id, uword *bitmap)
1830 vnet_main_t *vnm = vnet_get_main ();
1831 vnet_device_main_t *vdm = &vnet_device_main;
1832 vnet_hw_interface_t *hw;
1833 vnet_hw_if_tx_queue_t *txq;
1837 hw = vnet_get_hw_interface (vnm, hw_if_index);
1839 /* highest set bit in bitmap should not exceed last worker thread index */
1840 thread_index = clib_bitmap_last_set (bitmap);
1841 if ((thread_index != ~0) && (thread_index > vdm->last_worker_thread_index))
1842 return clib_error_return (0, "please specify valid thread(s)");
1845 vnet_hw_if_get_tx_queue_index_by_id (vnm, hw_if_index, queue_id);
1846 if (queue_index == ~0)
1847 return clib_error_return (0, "unknown queue %u on interface %s", queue_id,
1850 txq = vnet_hw_if_get_tx_queue (vnm, queue_index);
1852 // free the existing bitmap
1853 if (clib_bitmap_count_set_bits (txq->threads))
1855 txq->shared_queue = 0;
1856 clib_bitmap_free (txq->threads);
1859 clib_bitmap_foreach (thread_index, bitmap)
1860 vnet_hw_if_tx_queue_assign_thread (vnm, queue_index, thread_index);
1862 vnet_hw_if_update_runtime_data (vnm, hw_if_index);
1866 static clib_error_t *
1867 set_interface_tx_queue (vlib_main_t *vm, unformat_input_t *input,
1868 vlib_cli_command_t *cmd)
1870 clib_error_t *error = 0;
1871 unformat_input_t _line_input, *line_input = &_line_input;
1872 vnet_main_t *vnm = vnet_get_main ();
1873 u32 hw_if_index = (u32) ~0;
1874 u32 queue_id = (u32) 0;
1877 if (!unformat_user (input, unformat_line_input, line_input))
1880 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
1882 if (unformat (line_input, "%U", unformat_vnet_hw_interface, vnm,
1885 else if (unformat (line_input, "queue %d", &queue_id))
1887 else if (unformat (line_input, "threads %U", unformat_bitmap_list,
1892 error = clib_error_return (0, "parse error: '%U'",
1893 format_unformat_error, line_input);
1894 unformat_free (line_input);
1899 unformat_free (line_input);
1901 if (hw_if_index == (u32) ~0)
1903 error = clib_error_return (0, "please specify valid interface name");
1907 error = set_hw_interface_tx_queue (hw_if_index, queue_id, bitmap);
1910 clib_bitmap_free (bitmap);
1914 VLIB_CLI_COMMAND (cmd_set_if_tx_queue, static) = {
1915 .path = "set interface tx-queue",
1916 .short_help = "set interface tx-queue <interface> queue <n> "
1918 .function = set_interface_tx_queue,
1923 set_interface_rss_queues (vlib_main_t * vm, u32 hw_if_index,
1924 clib_bitmap_t * bitmap)
1926 vnet_main_t *vnm = vnet_get_main ();
1927 vnet_hw_interface_t *hi = vnet_get_hw_interface (vnm, hw_if_index);
1929 return vnet_hw_interface_set_rss_queues (vnm, hi, bitmap);
1932 static clib_error_t *
1933 set_interface_rss_queues_fn (vlib_main_t * vm,
1934 unformat_input_t * input,
1935 vlib_cli_command_t * cmd)
1937 clib_error_t *error = 0;
1938 unformat_input_t _line_input, *line_input = &_line_input;
1939 vnet_main_t *vnm = vnet_get_main ();
1940 u32 hw_if_index = (u32) ~ 0;
1941 clib_bitmap_t *bitmap = NULL;
1943 if (!unformat_user (input, unformat_line_input, line_input))
1946 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
1949 (line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
1952 if (unformat (line_input, "list %U", unformat_bitmap_list, &bitmap))
1956 error = clib_error_return (0, "parse error: '%U'",
1957 format_unformat_error, line_input);
1958 unformat_free (line_input);
1963 unformat_free (line_input);
1965 if (hw_if_index == (u32) ~ 0)
1967 error = clib_error_return (0, "please specify valid interface name");
1973 error = clib_error_return (0, "please specify the valid rss queues");
1977 error = set_interface_rss_queues (vm, hw_if_index, bitmap);
1981 clib_bitmap_free (bitmap);
1987 * This command is used to set the rss queues of a given interface
1988 * Not all the interfaces support this operation.
1989 * To display the current rss queues, use the command
1990 * '<em>show hardware-interfaces</em>'.
1993 * Example of how to set the rss queues to 0,2-5,7 of an interface:
1994 * @cliexstart{set interface rss queues VirtualFunctionEthernet18/1/0 list 0,2-5,7}
1998 VLIB_CLI_COMMAND (cmd_set_interface_rss_queues,static) = {
1999 .path = "set interface rss queues",
2000 .short_help = "set interface rss queues <interface> <list <queue-list>>",
2001 .function = set_interface_rss_queues_fn,
2006 format_vnet_pcap (u8 * s, va_list * args)
2008 vnet_pcap_t *pp = va_arg (*args, vnet_pcap_t *);
2009 int type = va_arg (*args, int);
2014 if (pp->pcap_rx_enable)
2016 s = format (s, "rx");
2019 if (pp->pcap_tx_enable)
2022 s = format (s, " and ");
2023 s = format (s, "tx");
2026 if (pp->pcap_drop_enable)
2029 s = format (s, " and ");
2030 s = format (s, "drop");
2035 s = format (s, "unknown type %d!", type);
2041 vnet_pcap_dispatch_trace_configure (vnet_pcap_dispatch_trace_args_t * a)
2043 vlib_main_t *vm = vlib_get_main ();
2044 vnet_main_t *vnm = vnet_get_main ();
2045 vnet_pcap_t *pp = &vnm->pcap;
2046 pcap_main_t *pm = &pp->pcap_main;
2047 vnet_classify_main_t *cm = &vnet_classify_main;
2051 if (pp->pcap_rx_enable || pp->pcap_tx_enable || pp->pcap_drop_enable)
2054 (vm, "pcap %U dispatch capture enabled: %d of %d pkts...",
2055 format_vnet_pcap, pp, 0 /* print type */ ,
2056 pm->n_packets_captured, pm->n_packets_to_capture);
2057 vlib_cli_output (vm, "capture to file %s", pm->file_name);
2060 vlib_cli_output (vm, "pcap dispatch capture disabled");
2065 /* Consistency checks */
2067 /* Enable w/ capture already enabled not allowed */
2068 if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
2069 && (a->rx_enable + a->tx_enable + a->drop_enable))
2070 return VNET_API_ERROR_INVALID_VALUE;
2072 /* Disable capture with capture already disabled, not interesting */
2073 if (((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable) ==
2075 ((a->rx_enable + a->tx_enable + a->drop_enable == 0)))
2076 return VNET_API_ERROR_VALUE_EXIST;
2078 /* Change number of packets to capture while capturing */
2079 if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
2080 && (a->rx_enable + a->tx_enable + a->drop_enable)
2081 && (pm->n_packets_to_capture != a->packets_to_capture))
2082 return VNET_API_ERROR_INVALID_VALUE_2;
2084 /* Classify filter specified, but no classify filter configured */
2085 if ((a->rx_enable + a->tx_enable + a->drop_enable) && a->filter &&
2086 (!cm->classify_table_index_by_sw_if_index ||
2087 cm->classify_table_index_by_sw_if_index[0] == ~0))
2088 return VNET_API_ERROR_NO_SUCH_LABEL;
2090 if (a->rx_enable + a->tx_enable + a->drop_enable)
2092 void *save_pcap_data;
2094 /* Sanity check max bytes per pkt */
2095 if (a->max_bytes_per_pkt < 32 || a->max_bytes_per_pkt > 9000)
2096 return VNET_API_ERROR_INVALID_MEMORY_SIZE;
2098 /* Clean up from previous run, if any */
2099 vec_reset_length (pm->pcap_data);
2101 /* Throw away the data buffer? */
2103 vec_free (pm->pcap_data);
2105 save_pcap_data = pm->pcap_data;
2107 memset (pm, 0, sizeof (*pm));
2109 pm->pcap_data = save_pcap_data;
2111 vec_validate_aligned (vnet_trace_placeholder, 2048,
2112 CLIB_CACHE_LINE_BYTES);
2114 clib_spinlock_init (&(pm->lock));
2116 if (a->filename == 0)
2121 stem = format (stem, "rx");
2123 stem = format (stem, "tx");
2125 stem = format (stem, "drop");
2126 a->filename = format (0, "/tmp/%v.pcap%c", stem, 0);
2130 pm->file_name = (char *) a->filename;
2131 pm->n_packets_captured = 0;
2132 pm->packet_type = PCAP_PACKET_TYPE_ethernet;
2133 /* Preallocate the data vector? */
2134 if (a->preallocate_data)
2137 (pm->pcap_data, a->packets_to_capture
2138 * ((sizeof (pcap_packet_header_t) + a->max_bytes_per_pkt)));
2139 vec_reset_length (pm->pcap_data);
2141 pm->n_packets_to_capture = a->packets_to_capture;
2142 pp->pcap_sw_if_index = a->sw_if_index;
2144 pp->filter_classify_table_index =
2145 cm->classify_table_index_by_sw_if_index[0];
2147 pp->filter_classify_table_index = ~0;
2148 pp->pcap_error_index = a->drop_err;
2149 pp->pcap_rx_enable = a->rx_enable;
2150 pp->pcap_tx_enable = a->tx_enable;
2151 pp->pcap_drop_enable = a->drop_enable;
2152 pp->max_bytes_per_pkt = a->max_bytes_per_pkt;
2156 pp->pcap_rx_enable = 0;
2157 pp->pcap_tx_enable = 0;
2158 pp->pcap_drop_enable = 0;
2159 pp->filter_classify_table_index = ~0;
2160 pp->pcap_error_index = ~0;
2161 if (pm->n_packets_captured)
2163 clib_error_t *error;
2164 pm->n_packets_to_capture = pm->n_packets_captured;
2165 vlib_cli_output (vm, "Write %d packets to %s, and stop capture...",
2166 pm->n_packets_captured, pm->file_name);
2167 error = pcap_write (pm);
2168 if (pm->flags & PCAP_MAIN_INIT_DONE)
2170 /* Report I/O errors... */
2173 clib_error_report (error);
2174 return VNET_API_ERROR_SYSCALL_ERROR_1;
2176 vec_free (pm->file_name);
2178 vec_free (pm->pcap_data);
2182 return VNET_API_ERROR_NO_SUCH_ENTRY;
2188 static clib_error_t *
2189 pcap_trace_command_fn (vlib_main_t * vm,
2190 unformat_input_t * input, vlib_cli_command_t * cmd)
2192 unformat_input_t _line_input, *line_input = &_line_input;
2193 vnet_pcap_dispatch_trace_args_t _a, *a = &_a;
2194 vnet_main_t *vnm = vnet_get_main ();
2197 u32 max_bytes_per_pkt = 512;
2201 int preallocate_data = 0;
2202 int drop_enable = 0;
2206 u32 sw_if_index = 0; /* default: any interface */
2207 vlib_error_t drop_err = ~0; /* default: any error */
2209 /* Get a line of input. */
2210 if (!unformat_user (input, unformat_line_input, line_input))
2213 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
2215 if (unformat (line_input, "rx"))
2217 else if (unformat (line_input, "tx"))
2219 else if (unformat (line_input, "drop"))
2221 else if (unformat (line_input, "off"))
2222 rx_enable = tx_enable = drop_enable = 0;
2223 else if (unformat (line_input, "max-bytes-per-pkt %u",
2224 &max_bytes_per_pkt))
2226 else if (unformat (line_input, "max %d", &max))
2228 else if (unformat (line_input, "packets-to-capture %d", &max))
2230 else if (unformat (line_input, "file %U", unformat_vlib_tmpfile,
2233 else if (unformat (line_input, "status %=", &status, 1))
2235 else if (unformat (line_input, "intfc %U",
2236 unformat_vnet_sw_interface, vnm, &sw_if_index))
2238 else if (unformat (line_input, "interface %U",
2239 unformat_vnet_sw_interface, vnm, &sw_if_index))
2241 else if (unformat (line_input, "error %U", unformat_vlib_error, vm,
2244 else if (unformat (line_input, "preallocate-data %=",
2245 &preallocate_data, 1))
2247 else if (unformat (line_input, "free-data %=", &free_data, 1))
2249 else if (unformat (line_input, "intfc any")
2250 || unformat (line_input, "interface any"))
2252 else if (unformat (line_input, "filter"))
2256 return clib_error_return (0, "unknown input `%U'",
2257 format_unformat_error, line_input);
2261 unformat_free (line_input);
2263 /* no need for memset (a, 0, sizeof (*a)), set all fields here. */
2264 a->filename = filename;
2265 a->rx_enable = rx_enable;
2266 a->tx_enable = tx_enable;
2267 a->preallocate_data = preallocate_data;
2268 a->free_data = free_data;
2269 a->drop_enable = drop_enable;
2271 a->packets_to_capture = max;
2272 a->sw_if_index = sw_if_index;
2274 a->max_bytes_per_pkt = max_bytes_per_pkt;
2275 a->drop_err = drop_err;
2277 rv = vnet_pcap_dispatch_trace_configure (a);
2284 case VNET_API_ERROR_INVALID_VALUE:
2285 return clib_error_return (0, "dispatch trace already enabled...");
2287 case VNET_API_ERROR_VALUE_EXIST:
2288 return clib_error_return (0, "dispatch trace already disabled...");
2290 case VNET_API_ERROR_INVALID_VALUE_2:
2291 return clib_error_return
2292 (0, "can't change number of records to capture while tracing...");
2294 case VNET_API_ERROR_SYSCALL_ERROR_1:
2295 return clib_error_return (0, "I/O writing trace capture...");
2297 case VNET_API_ERROR_NO_SUCH_ENTRY:
2298 return clib_error_return (0, "No packets captured...");
2300 case VNET_API_ERROR_INVALID_MEMORY_SIZE:
2301 return clib_error_return (0,
2302 "Max bytes per pkt must be > 32, < 9000...");
2304 case VNET_API_ERROR_NO_SUCH_LABEL:
2305 return clib_error_return
2306 (0, "No classify filter configured, see 'classify filter...'");
2309 vlib_cli_output (vm, "WARNING: trace configure returned %d", rv);
2316 * This command is used to start or stop a packet capture, or show
2317 * the status of packet capture.
2319 * This command has the following optional parameters:
2322 * - <b>rx</b> - Capture received packets
2324 * - <b>tx</b> - Capture transmitted packets
2326 * - <b>drop</b> - Capture dropped packets
2328 * - <b>off</b> - Stop capturing packets, write results to the specified file
2330 * - <b>max <nn></b> - Depth of local buffer. Once '<em>nn</em>' number
2331 * of packets have been received, buffer is flushed to file. Once another
2332 * '<em>nn</em>' number of packets have been received, buffer is flushed
2333 * to file, overwriting previous write. If not entered, value defaults
2334 * to 100. Can only be updated if packet capture is off.
2336 * - <b>max-bytes-per-pkt <nnnn></b> - Maximum number of bytes to capture
2337 * for each packet. Must be >= 32, <= 9000.
2339 * - <b>preallocate-data</b> - Preallocate the data buffer, to avoid
2340 * vector expansion delays during pcap capture
2342 * - <b>free-data</b> - Free the data buffer. Ordinarily it's a feature
2343 * to retain the data buffer so this option is seldom used.
2345 * - <b>intfc <interface-name>|any</b> - Used to specify a given interface,
2346 * or use '<em>any</em>' to run packet capture on all interfaces.
2347 * '<em>any</em>' is the default if not provided. Settings from a previous
2348 * packet capture are preserved, so '<em>any</em>' can be used to reset
2349 * the interface setting.
2351 * - <b>filter</b> - Use the pcap rx / tx / drop trace filter, which
2352 * must be configured. Use <b>classify filter pcap...</b> to configure the
2353 * filter. The filter will only be executed if the per-interface or
2354 * any-interface tests fail.
2356 * - <b>error <node>.<error></b> - filter packets based on a specific error.
2357 * For example: error {ip4-udp-lookup}.{No listener for dst port}
2359 * - <b>file <name></b> - Used to specify the output filename. The file will
2360 * be placed in the '<em>/tmp</em>' directory, so only the filename is
2361 * supported. Directory should not be entered. If file already exists, file
2362 * will be overwritten. If no filename is provided, the file will be
2363 * named "/tmp/rx.pcap", "/tmp/tx.pcap", "/tmp/rxandtx.pcap", etc.
2364 * Can only be updated if packet capture is off.
2366 * - <b>status</b> - Displays the current status and configured attributes
2367 * associated with a packet capture. If packet capture is in progress,
2368 * '<em>status</em>' also will return the number of packets currently in
2369 * the local buffer. All additional attributes entered on command line
2370 * with '<em>status</em>' will be ignored and not applied.
2373 * Example of how to display the status of a tx packet capture when off:
2374 * @cliexstart{pcap trace status}
2375 * max is 100, for any interface to file /tmp/vpe.pcap
2376 * pcap tx capture is off...
2378 * Example of how to start a tx packet capture:
2379 * @cliexstart{pcap trace tx max 35 intfc GigabitEthernet0/8/0 file
2382 * Example of how to display the status of a tx packet capture in progress:
2383 * @cliexstart{pcap trace status}
2384 * max is 35, for interface GigabitEthernet0/8/0 to file /tmp/vppTest.pcap
2385 * pcap tx capture is on: 20 of 35 pkts...
2387 * Example of how to stop a tx packet capture:
2388 * @cliexstart{pcap trace off}
2389 * captured 21 pkts...
2390 * saved to /tmp/vppTest.pcap...
2395 VLIB_CLI_COMMAND (pcap_tx_trace_command, static) = {
2396 .path = "pcap trace",
2398 "pcap trace [rx] [tx] [drop] [off] [max <nn>] [intfc <interface>|any]\n"
2399 " [file <name>] [status] [max-bytes-per-pkt <nnnn>][filter]\n"
2400 " [preallocate-data][free-data]",
2401 .function = pcap_trace_command_fn,
2406 * fd.io coding-style-patch-verification: ON
2409 * eval: (c-set-style "gnu")