2 * Copyright (c) 2015 Cisco and/or its affiliates.
3 * Licensed under the Apache License, Version 2.0 (the "License");
4 * you may not use this file except in compliance with the License.
5 * You may obtain a copy of the License at:
7 * http://www.apache.org/licenses/LICENSE-2.0
9 * Unless required by applicable law or agreed to in writing, software
10 * distributed under the License is distributed on an "AS IS" BASIS,
11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 * See the License for the specific language governing permissions and
13 * limitations under the License.
16 * ip/ip_lookup.c: ip4/6 adjacency and lookup table management
18 * Copyright (c) 2008 Eliot Dresselhaus
20 * Permission is hereby granted, free of charge, to any person obtaining
21 * a copy of this software and associated documentation files (the
22 * "Software"), to deal in the Software without restriction, including
23 * without limitation the rights to use, copy, modify, merge, publish,
24 * distribute, sublicense, and/or sell copies of the Software, and to
25 * permit persons to whom the Software is furnished to do so, subject to
26 * the following conditions:
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
35 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
36 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
37 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
40 #include <vnet/ip/ip.h>
41 #include <vnet/adj/adj.h>
42 #include <vnet/fib/fib_table.h>
43 #include <vnet/fib/ip4_fib.h>
44 #include <vnet/fib/ip6_fib.h>
45 #include <vnet/mpls/mpls.h>
46 #include <vnet/mfib/mfib_table.h>
47 #include <vnet/dpo/drop_dpo.h>
48 #include <vnet/dpo/classify_dpo.h>
49 #include <vnet/dpo/punt_dpo.h>
50 #include <vnet/dpo/receive_dpo.h>
51 #include <vnet/dpo/ip_null_dpo.h>
55 * @brief IPv4 and IPv6 adjacency and lookup table management.
60 ip_sw_interface_add_del (vnet_main_t * vnm, u32 sw_if_index, u32 is_add)
62 vec_validate_init_empty (ip4_main.
63 lookup_main.if_address_pool_index_by_sw_if_index,
65 vec_validate_init_empty (ip6_main.
66 lookup_main.if_address_pool_index_by_sw_if_index,
72 VNET_SW_INTERFACE_ADD_DEL_FUNCTION (ip_sw_interface_add_del);
75 ip_lookup_init (ip_lookup_main_t * lm, u32 is_ip6)
77 if (!lm->fib_result_n_bytes)
78 lm->fib_result_n_bytes = sizeof (uword);
81 mhash_init (&lm->prefix_to_if_prefix_index, sizeof (uword),
82 sizeof (ip_interface_prefix_key_t));
85 lm->format_address_and_length = format_ip6_address_and_length;
86 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
87 sizeof (ip6_address_fib_t));
91 lm->format_address_and_length = format_ip4_address_and_length;
92 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
93 sizeof (ip4_address_fib_t));
99 /* Setup all IP protocols to be punted and builtin-unknown. */
100 for (i = 0; i < 256; i++)
102 lm->local_next_by_ip_protocol[i] = IP_LOCAL_NEXT_PUNT;
103 lm->builtin_protocol_by_ip_protocol[i] = IP_BUILTIN_PROTOCOL_UNKNOWN;
106 lm->local_next_by_ip_protocol[IP_PROTOCOL_UDP] = IP_LOCAL_NEXT_UDP_LOOKUP;
107 lm->local_next_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
108 IP_PROTOCOL_ICMP] = IP_LOCAL_NEXT_ICMP;
109 lm->builtin_protocol_by_ip_protocol[IP_PROTOCOL_UDP] =
110 IP_BUILTIN_PROTOCOL_UDP;
111 lm->builtin_protocol_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
113 IP_BUILTIN_PROTOCOL_ICMP;
118 format_ip_flow_hash_config (u8 * s, va_list * args)
120 flow_hash_config_t flow_hash_config = va_arg (*args, u32);
123 if (flow_hash_config & v) \
124 s = format (s, "%s ", #n);
125 foreach_flow_hash_bit;
132 unformat_ip_flow_hash_config (unformat_input_t *input, va_list *args)
134 flow_hash_config_t *flow_hash_config = va_arg (*args, flow_hash_config_t *);
135 uword start_index = unformat_check_input (input);
136 int matched_once = 0;
138 if (unformat (input, "default"))
140 *flow_hash_config = IP_FLOW_HASH_DEFAULT;
143 while (!unformat_is_eof (input) &&
144 !is_white_space (unformat_peek_input (input)))
146 if (unformat (input, "%_,"))
149 else if (unformat (input, "%_" #a)) \
151 *flow_hash_config |= b; \
154 foreach_flow_hash_bit_v1
158 /* Roll back to our start */
159 input->index = start_index;
168 format_ip_adjacency_packet_data (u8 * s, va_list * args)
170 u8 *packet_data = va_arg (*args, u8 *);
171 u32 n_packet_data_bytes = va_arg (*args, u32);
173 s = format (s, "%U", format_hex_bytes, packet_data, n_packet_data_bytes);
179 unformat_dpo (unformat_input_t * input, va_list * args)
181 dpo_id_t *dpo = va_arg (*args, dpo_id_t *);
182 fib_protocol_t fp = va_arg (*args, int);
185 proto = fib_proto_to_dpo (fp);
187 if (unformat (input, "drop"))
188 dpo_copy (dpo, drop_dpo_get (proto));
189 else if (unformat (input, "punt"))
190 dpo_copy (dpo, punt_dpo_get (proto));
191 else if (unformat (input, "local"))
192 receive_dpo_add_or_lock (proto, ~0, NULL, dpo);
193 else if (unformat (input, "null-send-unreach"))
194 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_UNREACH, dpo);
195 else if (unformat (input, "null-send-prohibit"))
196 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_PROHIBIT, dpo);
197 else if (unformat (input, "null"))
198 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_NONE, dpo);
199 else if (unformat (input, "classify"))
201 u32 classify_table_index;
203 if (!unformat (input, "%d", &classify_table_index))
205 clib_warning ("classify adj must specify table index");
209 dpo_set (dpo, DPO_CLASSIFY, proto,
210 classify_dpo_create (proto, classify_table_index));
218 const ip46_address_t zero_addr = {
223 static clib_error_t *
224 vnet_ip_route_cmd (vlib_main_t * vm,
225 unformat_input_t * main_input, vlib_cli_command_t * cmd)
227 unformat_input_t _line_input, *line_input = &_line_input;
228 u32 table_id, is_del, fib_index, payload_proto;
229 dpo_id_t dpo = DPO_INVALID, *dpos = NULL;
230 fib_route_path_t *rpaths = NULL, rpath;
231 fib_prefix_t *prefixs = NULL, pfx;
232 clib_error_t *error = NULL;
239 clib_memset (&pfx, 0, sizeof (pfx));
241 /* Get a line of input. */
242 if (!unformat_user (main_input, unformat_line_input, line_input))
245 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
247 clib_memset (&rpath, 0, sizeof (rpath));
249 if (unformat (line_input, "table %d", &table_id))
251 else if (unformat (line_input, "count %f", &count))
254 else if (unformat (line_input, "%U/%d",
255 unformat_ip4_address, &pfx.fp_addr.ip4, &pfx.fp_len))
257 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
258 vec_add1 (prefixs, pfx);
260 else if (unformat (line_input, "%U/%d",
261 unformat_ip6_address, &pfx.fp_addr.ip6, &pfx.fp_len))
263 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
264 vec_add1 (prefixs, pfx);
266 else if (unformat (line_input, "via %U",
267 unformat_fib_route_path, &rpath, &payload_proto))
269 vec_add1 (rpaths, rpath);
271 else if (vec_len (prefixs) > 0 &&
272 unformat (line_input, "via %U",
273 unformat_dpo, &dpo, prefixs[0].fp_proto))
275 vec_add1 (dpos, dpo);
277 else if (unformat (line_input, "del"))
279 else if (unformat (line_input, "add"))
283 error = unformat_parse_error (line_input);
288 if (vec_len (prefixs) == 0)
291 clib_error_return (0, "expected ip4/ip6 destination address/length.");
295 if (!is_del && vec_len (rpaths) + vec_len (dpos) == 0)
297 error = clib_error_return (0, "expected paths.");
304 * if no table_id is passed we will manipulate the default
310 fib_index = fib_table_find (prefixs[0].fp_proto, table_id);
314 error = clib_error_return (0, "Nonexistent table id %d", table_id);
319 for (i = 0; i < vec_len (prefixs); i++)
321 if (is_del && 0 == vec_len (rpaths))
323 fib_table_entry_delete (fib_index, &prefixs[i], FIB_SOURCE_CLI);
325 else if (!is_del && 1 == vec_len (dpos))
327 fib_table_entry_special_dpo_add (fib_index,
330 FIB_ENTRY_FLAG_EXCLUSIVE,
332 dpo_reset (&dpos[0]);
334 else if (vec_len (dpos) > 0)
337 clib_error_return (0,
338 "Load-balancing over multiple special adjacencies is unsupported");
341 else if (0 < vec_len (rpaths))
346 t[0] = vlib_time_now (vm);
348 for (k = 0; k < n; k++)
350 fib_prefix_t rpfx = {
351 .fp_len = prefixs[i].fp_len,
352 .fp_proto = prefixs[i].fp_proto,
353 .fp_addr = prefixs[i].fp_addr,
357 fib_table_entry_path_remove2 (fib_index,
358 &rpfx, FIB_SOURCE_CLI, rpaths);
360 fib_table_entry_path_add2 (fib_index,
363 FIB_ENTRY_FLAG_NONE, rpaths);
365 fib_prefix_increment (&prefixs[i]);
368 t[1] = vlib_time_now (vm);
370 vlib_cli_output (vm, "%.6e routes/sec", count / (t[1] - t[0]));
374 error = clib_error_return (0, "Don't understand what you want...");
383 unformat_free (line_input);
388 vnet_ip_table_cmd (vlib_main_t * vm,
389 unformat_input_t * main_input,
390 vlib_cli_command_t * cmd, fib_protocol_t fproto)
392 unformat_input_t _line_input, *line_input = &_line_input;
393 clib_error_t *error = NULL;
394 u32 table_id, is_add;
400 /* Get a line of input. */
401 if (!unformat_user (main_input, unformat_line_input, line_input))
404 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
406 if (unformat (line_input, "%d", &table_id))
408 else if (unformat (line_input, "del"))
410 else if (unformat (line_input, "add"))
412 else if (unformat (line_input, "name %s", &name))
416 error = unformat_parse_error (line_input);
423 error = clib_error_return (0, "Can't change the default table");
432 table_id = ip_table_get_unused_id (fproto);
433 vlib_cli_output (vm, "%u\n", table_id);
435 ip_table_create (fproto, table_id, 0, name);
441 error = clib_error_return (0, "No table id");
444 ip_table_delete (fproto, table_id, 0);
450 unformat_free (line_input);
455 vnet_ip4_table_cmd (vlib_main_t * vm,
456 unformat_input_t * main_input, vlib_cli_command_t * cmd)
458 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
462 vnet_ip6_table_cmd (vlib_main_t * vm,
463 unformat_input_t * main_input, vlib_cli_command_t * cmd)
465 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
469 vnet_show_ip_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
470 vlib_cli_command_t *cmd, fib_protocol_t fproto)
472 unformat_input_t _line_input, *line_input = &_line_input;
473 fib_table_t *fib, *fibs;
474 clib_error_t *error = NULL;
475 u32 table_id = ~0, fib_index;
476 /* Get a line of input. */
477 if (unformat_user (main_input, unformat_line_input, line_input))
479 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
481 if (unformat (line_input, "%d", &table_id))
485 error = unformat_parse_error (line_input);
489 unformat_free (line_input);
492 fibs = (fproto == FIB_PROTOCOL_IP4) ? ip4_main.fibs : ip6_main.fibs;
494 if (table_id != (u32) ~0)
496 fib_index = fib_table_find (fproto, table_id);
497 if (fib_index == (u32) ~0)
499 error = clib_error_return (0, "Couldn't find table with table_id %u",
504 fib = fib_table_get (fib_index, fproto);
505 vlib_cli_output (vm, "[%u] table_id:%u %v", fib->ft_index,
506 fib->ft_table_id, fib->ft_desc);
510 pool_foreach (fib, fibs)
511 vlib_cli_output (vm, "[%u] table_id:%u %v", fib->ft_index,
512 fib->ft_table_id, fib->ft_desc);
520 vnet_show_ip4_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
521 vlib_cli_command_t *cmd)
523 return (vnet_show_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
527 vnet_show_ip6_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
528 vlib_cli_command_t *cmd)
530 return (vnet_show_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
534 VLIB_CLI_COMMAND (vlib_cli_ip_command, static) = {
536 .short_help = "Internet protocol (IP) commands",
541 VLIB_CLI_COMMAND (vlib_cli_ip6_command, static) = {
543 .short_help = "Internet protocol version 6 (IPv6) commands",
548 VLIB_CLI_COMMAND (vlib_cli_show_ip_command, static) = {
550 .short_help = "Internet protocol (IP) show commands",
555 VLIB_CLI_COMMAND (vlib_cli_show_ip6_command, static) = {
557 .short_help = "Internet protocol version 6 (IPv6) show commands",
562 * This command is used to add or delete IPv4 or IPv6 routes. All
563 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
564 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
565 * can be IPv4 or IPv6, but all must be of the same form in a single
566 * command. To display the current set of routes, use the commands
567 * '<em>show ip fib</em>' and '<em>show ip6 fib</em>'.
570 * Example of how to add a straight forward static route:
571 * @cliexcmd{ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
572 * Example of how to delete a straight forward static route:
573 * @cliexcmd{ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
574 * Mainly for route add/del performance testing, one can add or delete
575 * multiple routes by adding 'count N' to the previous item:
576 * @cliexcmd{ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0}
577 * Add multiple routes for the same destination to create equal-cost multipath:
578 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0}
579 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0}
580 * For unequal-cost multipath, specify the desired weights. This
581 * combination of weights results in 3/4 of the traffic following the
582 * second path, 1/4 following the first path:
583 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1}
584 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3}
585 * To add a route to a particular FIB table (VRF), use:
586 * @cliexcmd{ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0}
589 VLIB_CLI_COMMAND (ip_route_command, static) = {
591 .short_help = "ip route [add|del] [count <n>] <dst-ip-addr>/<width> [table "
592 "<table-id>] via [next-hop-address] [next-hop-interface] "
593 "[next-hop-table <value>] [weight <value>] [preference "
594 "<value>] [udp-encap <value>] [ip4-lookup-in-table <value>] "
595 "[ip6-lookup-in-table <value>] [mpls-lookup-in-table <value>] "
596 "[resolve-via-host] [resolve-via-connected] [rx-ip4 "
597 "<interface>] [out-labels <value value value>]",
598 .function = vnet_ip_route_cmd,
604 * This command is used to add or delete IPv4 Tables. All
605 * Tables must be explicitly added before that can be used. Creating a
606 * table will add both unicast and multicast FIBs
610 VLIB_CLI_COMMAND (ip4_table_command, static) = {
612 .short_help = "ip table [add|del] <table-id>",
613 .function = vnet_ip4_table_cmd,
619 * This command is used to add or delete IPv4 Tables. All
620 * Tables must be explicitly added before that can be used. Creating a
621 * table will add both unicast and multicast FIBs
625 VLIB_CLI_COMMAND (ip6_table_command, static) = {
627 .short_help = "ip6 table [add|del] <table-id>",
628 .function = vnet_ip6_table_cmd,
631 VLIB_CLI_COMMAND (show_ip4_table_command, static) = {
632 .path = "show ip table",
633 .short_help = "show ip table <table-id>",
634 .function = vnet_show_ip4_table_cmd,
637 VLIB_CLI_COMMAND (show_ip6_table_command, static) = {
638 .path = "show ip6 table",
639 .short_help = "show ip6 table <table-id>",
640 .function = vnet_show_ip6_table_cmd,
643 static clib_error_t *
644 ip_table_bind_cmd (vlib_main_t * vm,
645 unformat_input_t * input,
646 vlib_cli_command_t * cmd,
647 fib_protocol_t fproto)
649 vnet_main_t *vnm = vnet_get_main ();
650 clib_error_t *error = 0;
651 u32 sw_if_index, table_id;
656 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
658 error = clib_error_return (0, "unknown interface `%U'",
659 format_unformat_error, input);
663 if (unformat (input, "%d", &table_id))
667 error = clib_error_return (0, "expected table id `%U'",
668 format_unformat_error, input);
672 rv = ip_table_bind (fproto, sw_if_index, table_id);
674 if (VNET_API_ERROR_ADDRESS_FOUND_FOR_INTERFACE == rv)
676 error = clib_error_return (0, "IP addresses are still present on %U",
677 format_vnet_sw_if_index_name,
681 else if (VNET_API_ERROR_NO_SUCH_FIB == rv)
683 error = clib_error_return (0, "no such table %d", table_id);
687 error = clib_error_return (0, "unknown error");
694 static clib_error_t *
695 ip4_table_bind_cmd (vlib_main_t * vm,
696 unformat_input_t * input,
697 vlib_cli_command_t * cmd)
699 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP4));
702 static clib_error_t *
703 ip6_table_bind_cmd (vlib_main_t * vm,
704 unformat_input_t * input,
705 vlib_cli_command_t * cmd)
707 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP6));
711 * Place the indicated interface into the supplied IPv4 FIB table (also known
712 * as a VRF). The FIB table must be created using "ip table add" already. To
713 * display the current IPv4 FIB table, use the command '<em>show ip fib</em>'.
714 * FIB table will only be displayed if a route has been added to the table, or
715 * an IP Address is assigned to an interface in the table (which adds a route
718 * @note IP addresses added after setting the interface IP table are added to
719 * the indicated FIB table. If an IP address is added prior to changing the
720 * table then this is an error. The control plane must remove these addresses
721 * first and then change the table. VPP will not automatically move the
722 * addresses from the old to the new table as it does not know the validity
726 * Example of how to add an interface to an IPv4 FIB table (where 2 is the table-id):
727 * @cliexcmd{set interface ip table GigabitEthernet2/0/0 2}
730 VLIB_CLI_COMMAND (set_interface_ip_table_command, static) =
732 .path = "set interface ip table",
733 .function = ip4_table_bind_cmd,
734 .short_help = "set interface ip table <interface> <table-id>",
739 * Place the indicated interface into the supplied IPv6 FIB table (also known
740 * as a VRF). The FIB table must be created using "ip6 table add" already. To
741 * display the current IPv6 FIB table, use the command '<em>show ip6 fib</em>'.
742 * FIB table will only be displayed if a route has been added to the table, or
743 * an IP Address is assigned to an interface in the table (which adds a route
746 * @note IP addresses added after setting the interface IP table are added to
747 * the indicated FIB table. If an IP address is added prior to changing the
748 * table then this is an error. The control plane must remove these addresses
749 * first and then change the table. VPP will not automatically move the
750 * addresses from the old to the new table as it does not know the validity
754 * Example of how to add an interface to an IPv6 FIB table (where 2 is the table-id):
755 * @cliexcmd{set interface ip6 table GigabitEthernet2/0/0 2}
758 VLIB_CLI_COMMAND (set_interface_ip6_table_command, static) =
760 .path = "set interface ip6 table",
761 .function = ip6_table_bind_cmd,
762 .short_help = "set interface ip6 table <interface> <table-id>"
767 vnet_ip_mroute_cmd (vlib_main_t * vm,
768 unformat_input_t * main_input, vlib_cli_command_t * cmd)
770 unformat_input_t _line_input, *line_input = &_line_input;
771 fib_route_path_t rpath, *rpaths = NULL;
772 clib_error_t *error = NULL;
773 u32 table_id, is_del, payload_proto;
776 mfib_entry_flags_t eflags = 0;
777 u32 gcount, scount, ss, gg, incr;
779 u32 rpf_id = MFIB_RPF_ID_NONE;
784 clib_memset (&pfx, 0, sizeof (pfx));
785 clib_memset (&rpath, 0, sizeof (rpath));
786 rpath.frp_sw_if_index = ~0;
788 /* Get a line of input. */
789 if (!unformat_user (main_input, unformat_line_input, line_input))
792 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
794 if (unformat (line_input, "table %d", &table_id))
796 else if (unformat (line_input, "del"))
798 else if (unformat (line_input, "add"))
800 else if (unformat (line_input, "rpf-id %d", &rpf_id))
802 else if (unformat (line_input, "scount %d", &scount))
804 else if (unformat (line_input, "gcount %d", &gcount))
806 else if (unformat (line_input, "%U %U",
807 unformat_ip4_address,
808 &pfx.fp_src_addr.ip4,
809 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
811 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
814 else if (unformat (line_input, "%U %U",
815 unformat_ip6_address,
816 &pfx.fp_src_addr.ip6,
817 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
819 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
822 else if (unformat (line_input, "%U/%d",
823 unformat_ip4_address,
824 &pfx.fp_grp_addr.ip4, &pfx.fp_len))
826 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
827 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
829 else if (unformat (line_input, "%U/%d",
830 unformat_ip6_address,
831 &pfx.fp_grp_addr.ip6, &pfx.fp_len))
833 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
834 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
836 else if (unformat (line_input, "%U",
837 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
839 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
840 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
843 else if (unformat (line_input, "%U",
844 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
846 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
847 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
850 else if (unformat (line_input, "via local Forward"))
852 clib_memset (&rpath.frp_addr, 0, sizeof (rpath.frp_addr));
853 rpath.frp_sw_if_index = ~0;
854 rpath.frp_weight = 1;
855 rpath.frp_flags |= FIB_ROUTE_PATH_LOCAL;
857 * set the path proto appropriately for the prefix
859 rpath.frp_proto = fib_proto_to_dpo (pfx.fp_proto);
860 rpath.frp_mitf_flags = MFIB_ITF_FLAG_FORWARD;
862 vec_add1 (rpaths, rpath);
864 else if (unformat (line_input, "via %U",
865 unformat_fib_route_path, &rpath, &payload_proto))
867 vec_add1 (rpaths, rpath);
869 else if (unformat (line_input, "%U",
870 unformat_mfib_entry_flags, &eflags))
874 error = unformat_parse_error (line_input);
882 * if no table_id is passed we will manipulate the default
888 fib_index = mfib_table_find (pfx.fp_proto, table_id);
892 error = clib_error_return (0, "Nonexistent table id %d", table_id);
897 timet[0] = vlib_time_now (vm);
899 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
901 incr = 1 << (32 - (pfx.fp_len % 32));
905 incr = 1 << (128 - (pfx.fp_len % 128));
908 for (ss = 0; ss < scount; ss++)
910 for (gg = 0; gg < gcount; gg++)
912 if (is_del && 0 == vec_len (rpaths))
914 /* no path provided => route delete */
915 mfib_table_entry_delete (fib_index, &pfx, MFIB_SOURCE_CLI);
917 else if (eflags || (MFIB_RPF_ID_NONE != rpf_id))
919 mfib_table_entry_update (fib_index, &pfx, MFIB_SOURCE_CLI,
925 mfib_table_entry_path_remove (fib_index,
926 &pfx, MFIB_SOURCE_CLI, rpaths);
928 mfib_table_entry_path_update (fib_index, &pfx, MFIB_SOURCE_CLI,
929 MFIB_ENTRY_FLAG_NONE, rpaths);
932 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
934 pfx.fp_grp_addr.ip4.as_u32 =
935 clib_host_to_net_u32 (incr +
936 clib_net_to_host_u32 (pfx.
942 int bucket = (incr < 64 ? 0 : 1);
943 pfx.fp_grp_addr.ip6.as_u64[bucket] =
944 clib_host_to_net_u64 (incr +
945 clib_net_to_host_u64 (pfx.
946 fp_grp_addr.ip6.as_u64
951 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
953 pfx.fp_src_addr.ip4.as_u32 =
954 clib_host_to_net_u32 (1 +
955 clib_net_to_host_u32 (pfx.fp_src_addr.
960 pfx.fp_src_addr.ip6.as_u64[1] =
961 clib_host_to_net_u64 (1 +
962 clib_net_to_host_u64 (pfx.fp_src_addr.
967 timet[1] = vlib_time_now (vm);
969 if (scount > 1 || gcount > 1)
970 vlib_cli_output (vm, "%.6e routes/sec",
971 (scount * gcount) / (timet[1] - timet[0]));
975 unformat_free (line_input);
981 * This command is used to add or delete IPv4 or IPv6 multicast routes. All
982 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
983 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
984 * can be IPv4 or IPv6, but all must be of the same form in a single
985 * command. To display the current set of routes, use the commands
986 * '<em>show ip mfib</em>' and '<em>show ip6 mfib</em>'.
987 * The full set of support flags for interfaces and route is shown via;
988 * '<em>show mfib route flags</em>' and '<em>show mfib itf flags</em>'
991 * Example of how to add a forwarding interface to a route (and create the
992 * route if it does not exist)
993 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/0 Forward}
994 * Example of how to add an accepting interface to a route (and create the
995 * route if it does not exist)
996 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/1 Accept}
997 * Example of changing the route's flags to send signals via the API
998 * @cliexcmd{ip mroute add 232.1.1.1 Signal}
1002 VLIB_CLI_COMMAND (ip_mroute_command, static) =
1004 .path = "ip mroute",
1005 .short_help = "ip mroute [add|del] <dst-ip-addr>/<width> [table <table-id>] [rpf-id <ID>] [via <next-hop-ip-addr> [<interface>],",
1006 .function = vnet_ip_mroute_cmd,
1012 * fd.io coding-style-patch-verification: ON
1015 * eval: (c-set-style "gnu")