2 * Copyright (c) 2015 Cisco and/or its affiliates.
3 * Licensed under the Apache License, Version 2.0 (the "License");
4 * you may not use this file except in compliance with the License.
5 * You may obtain a copy of the License at:
7 * http://www.apache.org/licenses/LICENSE-2.0
9 * Unless required by applicable law or agreed to in writing, software
10 * distributed under the License is distributed on an "AS IS" BASIS,
11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 * See the License for the specific language governing permissions and
13 * limitations under the License.
16 * ip/ip_lookup.c: ip4/6 adjacency and lookup table management
18 * Copyright (c) 2008 Eliot Dresselhaus
20 * Permission is hereby granted, free of charge, to any person obtaining
21 * a copy of this software and associated documentation files (the
22 * "Software"), to deal in the Software without restriction, including
23 * without limitation the rights to use, copy, modify, merge, publish,
24 * distribute, sublicense, and/or sell copies of the Software, and to
25 * permit persons to whom the Software is furnished to do so, subject to
26 * the following conditions:
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
35 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
36 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
37 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
40 #include <vnet/ip/ip.h>
41 #include <vnet/adj/adj.h>
42 #include <vnet/fib/fib_table.h>
43 #include <vnet/fib/ip4_fib.h>
44 #include <vnet/fib/ip6_fib.h>
45 #include <vnet/mpls/mpls.h>
46 #include <vnet/mfib/mfib_table.h>
47 #include <vnet/dpo/drop_dpo.h>
48 #include <vnet/dpo/classify_dpo.h>
49 #include <vnet/dpo/punt_dpo.h>
50 #include <vnet/dpo/receive_dpo.h>
51 #include <vnet/dpo/ip_null_dpo.h>
55 * @brief IPv4 and IPv6 adjacency and lookup table management.
60 ip_sw_interface_add_del (vnet_main_t * vnm, u32 sw_if_index, u32 is_add)
62 vec_validate_init_empty (ip4_main.
63 lookup_main.if_address_pool_index_by_sw_if_index,
65 vec_validate_init_empty (ip6_main.
66 lookup_main.if_address_pool_index_by_sw_if_index,
72 VNET_SW_INTERFACE_ADD_DEL_FUNCTION (ip_sw_interface_add_del);
75 ip_lookup_init (ip_lookup_main_t * lm, u32 is_ip6)
77 if (!lm->fib_result_n_bytes)
78 lm->fib_result_n_bytes = sizeof (uword);
81 mhash_init (&lm->prefix_to_if_prefix_index, sizeof (uword),
82 sizeof (ip_interface_prefix_key_t));
85 lm->format_address_and_length = format_ip6_address_and_length;
86 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
87 sizeof (ip6_address_fib_t));
91 lm->format_address_and_length = format_ip4_address_and_length;
92 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
93 sizeof (ip4_address_fib_t));
99 /* Setup all IP protocols to be punted and builtin-unknown. */
100 for (i = 0; i < 256; i++)
102 lm->local_next_by_ip_protocol[i] = IP_LOCAL_NEXT_PUNT;
103 lm->builtin_protocol_by_ip_protocol[i] = IP_BUILTIN_PROTOCOL_UNKNOWN;
106 lm->local_next_by_ip_protocol[IP_PROTOCOL_UDP] = IP_LOCAL_NEXT_UDP_LOOKUP;
107 lm->local_next_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
108 IP_PROTOCOL_ICMP] = IP_LOCAL_NEXT_ICMP;
109 lm->builtin_protocol_by_ip_protocol[IP_PROTOCOL_UDP] =
110 IP_BUILTIN_PROTOCOL_UDP;
111 lm->builtin_protocol_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
113 IP_BUILTIN_PROTOCOL_ICMP;
118 format_ip_flow_hash_config (u8 * s, va_list * args)
120 flow_hash_config_t flow_hash_config = va_arg (*args, u32);
123 if (flow_hash_config & v) \
124 s = format (s, "%s ", #n);
125 foreach_flow_hash_bit;
132 unformat_ip_flow_hash_config (unformat_input_t *input, va_list *args)
134 flow_hash_config_t *flow_hash_config = va_arg (*args, flow_hash_config_t *);
135 uword start_index = unformat_check_input (input);
136 int matched_once = 0;
138 if (unformat (input, "default"))
140 *flow_hash_config = IP_FLOW_HASH_DEFAULT;
143 while (!unformat_is_eof (input) &&
144 !is_white_space (unformat_peek_input (input)))
146 if (unformat (input, "%_,"))
149 else if (unformat (input, "%_" #a)) \
151 *flow_hash_config |= c; \
154 foreach_flow_hash_bit
158 /* Roll back to our start */
159 input->index = start_index;
168 format_ip_adjacency_packet_data (u8 * s, va_list * args)
170 u8 *packet_data = va_arg (*args, u8 *);
171 u32 n_packet_data_bytes = va_arg (*args, u32);
173 s = format (s, "%U", format_hex_bytes, packet_data, n_packet_data_bytes);
179 unformat_dpo (unformat_input_t * input, va_list * args)
181 dpo_id_t *dpo = va_arg (*args, dpo_id_t *);
182 fib_protocol_t fp = va_arg (*args, int);
185 proto = fib_proto_to_dpo (fp);
187 if (unformat (input, "drop"))
188 dpo_copy (dpo, drop_dpo_get (proto));
189 else if (unformat (input, "punt"))
190 dpo_copy (dpo, punt_dpo_get (proto));
191 else if (unformat (input, "local"))
192 receive_dpo_add_or_lock (proto, ~0, NULL, dpo);
193 else if (unformat (input, "null-send-unreach"))
194 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_UNREACH, dpo);
195 else if (unformat (input, "null-send-prohibit"))
196 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_PROHIBIT, dpo);
197 else if (unformat (input, "null"))
198 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_NONE, dpo);
199 else if (unformat (input, "classify"))
201 u32 classify_table_index;
203 if (!unformat (input, "%d", &classify_table_index))
205 clib_warning ("classify adj must specify table index");
209 dpo_set (dpo, DPO_CLASSIFY, proto,
210 classify_dpo_create (proto, classify_table_index));
218 const ip46_address_t zero_addr = {
224 fib_prefix_validate (const fib_prefix_t *prefix)
226 if (FIB_PROTOCOL_IP4 == prefix->fp_proto)
228 if (prefix->fp_len > 32)
234 if (FIB_PROTOCOL_IP6 == prefix->fp_proto)
236 if (prefix->fp_len > 128)
244 static clib_error_t *
245 vnet_ip_route_cmd (vlib_main_t * vm,
246 unformat_input_t * main_input, vlib_cli_command_t * cmd)
248 unformat_input_t _line_input, *line_input = &_line_input;
249 u32 table_id, is_del, fib_index, payload_proto;
250 dpo_id_t dpo = DPO_INVALID, *dpos = NULL;
251 fib_route_path_t *rpaths = NULL, rpath;
252 fib_prefix_t *prefixs = NULL, pfx;
253 clib_error_t *error = NULL;
260 clib_memset (&pfx, 0, sizeof (pfx));
262 /* Get a line of input. */
263 if (!unformat_user (main_input, unformat_line_input, line_input))
266 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
268 clib_memset (&rpath, 0, sizeof (rpath));
270 if (unformat (line_input, "table %d", &table_id))
272 else if (unformat (line_input, "count %f", &count))
275 else if (unformat (line_input, "%U/%d",
276 unformat_ip4_address, &pfx.fp_addr.ip4, &pfx.fp_len))
278 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
279 vec_add1 (prefixs, pfx);
281 else if (unformat (line_input, "%U/%d",
282 unformat_ip6_address, &pfx.fp_addr.ip6, &pfx.fp_len))
284 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
285 vec_add1 (prefixs, pfx);
287 else if (unformat (line_input, "via %U",
288 unformat_fib_route_path, &rpath, &payload_proto))
290 vec_add1 (rpaths, rpath);
292 else if (vec_len (prefixs) > 0 &&
293 unformat (line_input, "via %U",
294 unformat_dpo, &dpo, prefixs[0].fp_proto))
296 vec_add1 (dpos, dpo);
298 else if (unformat (line_input, "del"))
300 else if (unformat (line_input, "add"))
304 error = unformat_parse_error (line_input);
309 if (vec_len (prefixs) == 0)
312 clib_error_return (0, "expected ip4/ip6 destination address/length.");
316 if (!is_del && vec_len (rpaths) + vec_len (dpos) == 0)
318 error = clib_error_return (0, "expected paths.");
325 * if no table_id is passed we will manipulate the default
331 fib_index = fib_table_find (prefixs[0].fp_proto, table_id);
335 error = clib_error_return (0, "Nonexistent table id %d", table_id);
340 for (i = 0; i < vec_len (prefixs); i++)
342 if (is_del && 0 == vec_len (rpaths))
344 fib_table_entry_delete (fib_index, &prefixs[i], FIB_SOURCE_CLI);
346 else if (!is_del && 1 == vec_len (dpos))
348 fib_table_entry_special_dpo_add (fib_index,
351 FIB_ENTRY_FLAG_EXCLUSIVE,
353 dpo_reset (&dpos[0]);
355 else if (vec_len (dpos) > 0)
358 clib_error_return (0,
359 "Load-balancing over multiple special adjacencies is unsupported");
362 else if (0 < vec_len (rpaths))
367 t[0] = vlib_time_now (vm);
369 for (k = 0; k < n; k++)
371 fib_prefix_t rpfx = {
372 .fp_len = prefixs[i].fp_len,
373 .fp_proto = prefixs[i].fp_proto,
374 .fp_addr = prefixs[i].fp_addr,
377 if (!fib_prefix_validate (&rpfx))
379 vlib_cli_output (vm, "Invalid prefix len: %d", rpfx.fp_len);
384 fib_table_entry_path_remove2 (fib_index,
385 &rpfx, FIB_SOURCE_CLI, rpaths);
387 fib_table_entry_path_add2 (fib_index,
390 FIB_ENTRY_FLAG_NONE, rpaths);
392 fib_prefix_increment (&prefixs[i]);
395 t[1] = vlib_time_now (vm);
397 vlib_cli_output (vm, "%.6e routes/sec", count / (t[1] - t[0]));
401 error = clib_error_return (0, "Don't understand what you want...");
410 unformat_free (line_input);
415 vnet_ip_table_cmd (vlib_main_t * vm,
416 unformat_input_t * main_input,
417 vlib_cli_command_t * cmd, fib_protocol_t fproto)
419 unformat_input_t _line_input, *line_input = &_line_input;
420 clib_error_t *error = NULL;
421 u32 table_id, is_add;
427 /* Get a line of input. */
428 if (!unformat_user (main_input, unformat_line_input, line_input))
431 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
433 if (unformat (line_input, "%d", &table_id))
435 else if (unformat (line_input, "del"))
437 else if (unformat (line_input, "add"))
439 else if (unformat (line_input, "name %s", &name))
443 error = unformat_parse_error (line_input);
450 error = clib_error_return (0, "Can't change the default table");
459 table_id = ip_table_get_unused_id (fproto);
460 vlib_cli_output (vm, "%u\n", table_id);
462 ip_table_create (fproto, table_id, 0, name);
468 error = clib_error_return (0, "No table id");
471 ip_table_delete (fproto, table_id, 0);
477 unformat_free (line_input);
482 vnet_ip4_table_cmd (vlib_main_t * vm,
483 unformat_input_t * main_input, vlib_cli_command_t * cmd)
485 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
489 vnet_ip6_table_cmd (vlib_main_t * vm,
490 unformat_input_t * main_input, vlib_cli_command_t * cmd)
492 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
496 vnet_show_ip_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
497 vlib_cli_command_t *cmd, fib_protocol_t fproto)
499 unformat_input_t _line_input, *line_input = &_line_input;
500 fib_table_t *fib, *fibs;
501 clib_error_t *error = NULL;
502 u32 table_id = ~0, fib_index;
503 /* Get a line of input. */
504 if (unformat_user (main_input, unformat_line_input, line_input))
506 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
508 if (unformat (line_input, "%d", &table_id))
512 error = unformat_parse_error (line_input);
516 unformat_free (line_input);
519 fibs = (fproto == FIB_PROTOCOL_IP4) ? ip4_main.fibs : ip6_main.fibs;
521 if (table_id != (u32) ~0)
523 fib_index = fib_table_find (fproto, table_id);
524 if (fib_index == (u32) ~0)
526 error = clib_error_return (0, "Couldn't find table with table_id %u",
531 fib = fib_table_get (fib_index, fproto);
532 vlib_cli_output (vm, "[%u] table_id:%u %v", fib->ft_index,
533 fib->ft_table_id, fib->ft_desc);
537 pool_foreach (fib, fibs)
538 vlib_cli_output (vm, "[%u] table_id:%u %v", fib->ft_index,
539 fib->ft_table_id, fib->ft_desc);
547 vnet_show_ip4_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
548 vlib_cli_command_t *cmd)
550 return (vnet_show_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
554 vnet_show_ip6_table_cmd (vlib_main_t *vm, unformat_input_t *main_input,
555 vlib_cli_command_t *cmd)
557 return (vnet_show_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
561 VLIB_CLI_COMMAND (vlib_cli_ip_command, static) = {
563 .short_help = "Internet protocol (IP) commands",
568 VLIB_CLI_COMMAND (vlib_cli_ip6_command, static) = {
570 .short_help = "Internet protocol version 6 (IPv6) commands",
575 VLIB_CLI_COMMAND (vlib_cli_show_ip_command, static) = {
577 .short_help = "Internet protocol (IP) show commands",
582 VLIB_CLI_COMMAND (vlib_cli_show_ip6_command, static) = {
584 .short_help = "Internet protocol version 6 (IPv6) show commands",
589 * This command is used to add or delete IPv4 or IPv6 routes. All
590 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
591 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
592 * can be IPv4 or IPv6, but all must be of the same form in a single
593 * command. To display the current set of routes, use the commands
594 * '<em>show ip fib</em>' and '<em>show ip6 fib</em>'.
597 * Example of how to add a straight forward static route:
598 * @cliexcmd{ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
599 * Example of how to delete a straight forward static route:
600 * @cliexcmd{ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
601 * Mainly for route add/del performance testing, one can add or delete
602 * multiple routes by adding 'count N' to the previous item:
603 * @cliexcmd{ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0}
604 * Add multiple routes for the same destination to create equal-cost multipath:
605 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0}
606 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0}
607 * For unequal-cost multipath, specify the desired weights. This
608 * combination of weights results in 3/4 of the traffic following the
609 * second path, 1/4 following the first path:
610 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1}
611 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3}
612 * To add a route to a particular FIB table (VRF), use:
613 * @cliexcmd{ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0}
616 VLIB_CLI_COMMAND (ip_route_command, static) = {
618 .short_help = "ip route [add|del] [count <n>] <dst-ip-addr>/<width> [table "
619 "<table-id>] via [next-hop-address] [next-hop-interface] "
620 "[next-hop-table <value>] [weight <value>] [preference "
621 "<value>] [udp-encap <value>] [ip4-lookup-in-table <value>] "
622 "[ip6-lookup-in-table <value>] [mpls-lookup-in-table <value>] "
623 "[resolve-via-host] [resolve-via-connected] [rx-ip4 "
624 "<interface>] [out-labels <value value value>]",
625 .function = vnet_ip_route_cmd,
631 * This command is used to add or delete IPv4 Tables. All
632 * Tables must be explicitly added before that can be used. Creating a
633 * table will add both unicast and multicast FIBs
637 VLIB_CLI_COMMAND (ip4_table_command, static) = {
639 .short_help = "ip table [add|del] <table-id>",
640 .function = vnet_ip4_table_cmd,
646 * This command is used to add or delete IPv4 Tables. All
647 * Tables must be explicitly added before that can be used. Creating a
648 * table will add both unicast and multicast FIBs
652 VLIB_CLI_COMMAND (ip6_table_command, static) = {
654 .short_help = "ip6 table [add|del] <table-id>",
655 .function = vnet_ip6_table_cmd,
658 VLIB_CLI_COMMAND (show_ip4_table_command, static) = {
659 .path = "show ip table",
660 .short_help = "show ip table <table-id>",
661 .function = vnet_show_ip4_table_cmd,
664 VLIB_CLI_COMMAND (show_ip6_table_command, static) = {
665 .path = "show ip6 table",
666 .short_help = "show ip6 table <table-id>",
667 .function = vnet_show_ip6_table_cmd,
670 static clib_error_t *
671 ip_table_bind_cmd (vlib_main_t * vm,
672 unformat_input_t * input,
673 vlib_cli_command_t * cmd,
674 fib_protocol_t fproto)
676 vnet_main_t *vnm = vnet_get_main ();
677 clib_error_t *error = 0;
678 u32 sw_if_index, table_id;
683 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
685 error = clib_error_return (0, "unknown interface `%U'",
686 format_unformat_error, input);
690 if (unformat (input, "%d", &table_id))
694 error = clib_error_return (0, "expected table id `%U'",
695 format_unformat_error, input);
699 rv = ip_table_bind (fproto, sw_if_index, table_id);
701 if (VNET_API_ERROR_ADDRESS_FOUND_FOR_INTERFACE == rv)
703 error = clib_error_return (0, "IP addresses are still present on %U",
704 format_vnet_sw_if_index_name,
708 else if (VNET_API_ERROR_NO_SUCH_FIB == rv)
710 error = clib_error_return (0, "no such table %d", table_id);
714 error = clib_error_return (0, "unknown error");
721 static clib_error_t *
722 ip4_table_bind_cmd (vlib_main_t * vm,
723 unformat_input_t * input,
724 vlib_cli_command_t * cmd)
726 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP4));
729 static clib_error_t *
730 ip6_table_bind_cmd (vlib_main_t * vm,
731 unformat_input_t * input,
732 vlib_cli_command_t * cmd)
734 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP6));
738 * Place the indicated interface into the supplied IPv4 FIB table (also known
739 * as a VRF). The FIB table must be created using "ip table add" already. To
740 * display the current IPv4 FIB table, use the command '<em>show ip fib</em>'.
741 * FIB table will only be displayed if a route has been added to the table, or
742 * an IP Address is assigned to an interface in the table (which adds a route
745 * @note IP addresses added after setting the interface IP table are added to
746 * the indicated FIB table. If an IP address is added prior to changing the
747 * table then this is an error. The control plane must remove these addresses
748 * first and then change the table. VPP will not automatically move the
749 * addresses from the old to the new table as it does not know the validity
753 * Example of how to add an interface to an IPv4 FIB table (where 2 is the table-id):
754 * @cliexcmd{set interface ip table GigabitEthernet2/0/0 2}
757 VLIB_CLI_COMMAND (set_interface_ip_table_command, static) =
759 .path = "set interface ip table",
760 .function = ip4_table_bind_cmd,
761 .short_help = "set interface ip table <interface> <table-id>",
766 * Place the indicated interface into the supplied IPv6 FIB table (also known
767 * as a VRF). The FIB table must be created using "ip6 table add" already. To
768 * display the current IPv6 FIB table, use the command '<em>show ip6 fib</em>'.
769 * FIB table will only be displayed if a route has been added to the table, or
770 * an IP Address is assigned to an interface in the table (which adds a route
773 * @note IP addresses added after setting the interface IP table are added to
774 * the indicated FIB table. If an IP address is added prior to changing the
775 * table then this is an error. The control plane must remove these addresses
776 * first and then change the table. VPP will not automatically move the
777 * addresses from the old to the new table as it does not know the validity
781 * Example of how to add an interface to an IPv6 FIB table (where 2 is the table-id):
782 * @cliexcmd{set interface ip6 table GigabitEthernet2/0/0 2}
785 VLIB_CLI_COMMAND (set_interface_ip6_table_command, static) =
787 .path = "set interface ip6 table",
788 .function = ip6_table_bind_cmd,
789 .short_help = "set interface ip6 table <interface> <table-id>"
794 vnet_ip_mroute_cmd (vlib_main_t * vm,
795 unformat_input_t * main_input, vlib_cli_command_t * cmd)
797 unformat_input_t _line_input, *line_input = &_line_input;
798 fib_route_path_t rpath, *rpaths = NULL;
799 clib_error_t *error = NULL;
800 u32 table_id, is_del, payload_proto;
803 mfib_entry_flags_t eflags = 0;
804 u32 gcount, scount, ss, gg, incr;
806 u32 rpf_id = MFIB_RPF_ID_NONE;
811 clib_memset (&pfx, 0, sizeof (pfx));
812 clib_memset (&rpath, 0, sizeof (rpath));
813 rpath.frp_sw_if_index = ~0;
815 /* Get a line of input. */
816 if (!unformat_user (main_input, unformat_line_input, line_input))
819 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
821 if (unformat (line_input, "table %d", &table_id))
823 else if (unformat (line_input, "del"))
825 else if (unformat (line_input, "add"))
827 else if (unformat (line_input, "rpf-id %d", &rpf_id))
829 else if (unformat (line_input, "scount %d", &scount))
831 else if (unformat (line_input, "gcount %d", &gcount))
833 else if (unformat (line_input, "%U %U",
834 unformat_ip4_address,
835 &pfx.fp_src_addr.ip4,
836 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
838 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
841 else if (unformat (line_input, "%U %U",
842 unformat_ip6_address,
843 &pfx.fp_src_addr.ip6,
844 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
846 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
849 else if (unformat (line_input, "%U/%d",
850 unformat_ip4_address,
851 &pfx.fp_grp_addr.ip4, &pfx.fp_len))
853 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
854 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
856 else if (unformat (line_input, "%U/%d",
857 unformat_ip6_address,
858 &pfx.fp_grp_addr.ip6, &pfx.fp_len))
860 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
861 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
863 else if (unformat (line_input, "%U",
864 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
866 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
867 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
870 else if (unformat (line_input, "%U",
871 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
873 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
874 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
877 else if (unformat (line_input, "via local Forward"))
879 clib_memset (&rpath.frp_addr, 0, sizeof (rpath.frp_addr));
880 rpath.frp_sw_if_index = ~0;
881 rpath.frp_weight = 1;
882 rpath.frp_flags |= FIB_ROUTE_PATH_LOCAL;
884 * set the path proto appropriately for the prefix
886 rpath.frp_proto = fib_proto_to_dpo (pfx.fp_proto);
887 rpath.frp_mitf_flags = MFIB_ITF_FLAG_FORWARD;
889 vec_add1 (rpaths, rpath);
891 else if (unformat (line_input, "via %U",
892 unformat_fib_route_path, &rpath, &payload_proto))
894 vec_add1 (rpaths, rpath);
896 else if (unformat (line_input, "%U",
897 unformat_mfib_entry_flags, &eflags))
901 error = unformat_parse_error (line_input);
909 * if no table_id is passed we will manipulate the default
915 fib_index = mfib_table_find (pfx.fp_proto, table_id);
919 error = clib_error_return (0, "Nonexistent table id %d", table_id);
924 timet[0] = vlib_time_now (vm);
926 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
928 incr = 1 << (32 - (pfx.fp_len % 32));
932 incr = 1 << (128 - (pfx.fp_len % 128));
935 for (ss = 0; ss < scount; ss++)
937 for (gg = 0; gg < gcount; gg++)
939 if (is_del && 0 == vec_len (rpaths))
941 /* no path provided => route delete */
942 mfib_table_entry_delete (fib_index, &pfx, MFIB_SOURCE_CLI);
944 else if (eflags || (MFIB_RPF_ID_NONE != rpf_id))
946 mfib_table_entry_update (fib_index, &pfx, MFIB_SOURCE_CLI,
952 mfib_table_entry_path_remove (fib_index,
953 &pfx, MFIB_SOURCE_CLI, rpaths);
955 mfib_table_entry_path_update (fib_index, &pfx, MFIB_SOURCE_CLI,
956 MFIB_ENTRY_FLAG_NONE, rpaths);
959 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
961 pfx.fp_grp_addr.ip4.as_u32 =
962 clib_host_to_net_u32 (incr +
963 clib_net_to_host_u32 (pfx.
969 int bucket = (incr < 64 ? 0 : 1);
970 pfx.fp_grp_addr.ip6.as_u64[bucket] =
971 clib_host_to_net_u64 (incr +
972 clib_net_to_host_u64 (pfx.
973 fp_grp_addr.ip6.as_u64
978 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
980 pfx.fp_src_addr.ip4.as_u32 =
981 clib_host_to_net_u32 (1 +
982 clib_net_to_host_u32 (pfx.fp_src_addr.
987 pfx.fp_src_addr.ip6.as_u64[1] =
988 clib_host_to_net_u64 (1 +
989 clib_net_to_host_u64 (pfx.fp_src_addr.
994 timet[1] = vlib_time_now (vm);
996 if (scount > 1 || gcount > 1)
997 vlib_cli_output (vm, "%.6e routes/sec",
998 (scount * gcount) / (timet[1] - timet[0]));
1002 unformat_free (line_input);
1008 * This command is used to add or delete IPv4 or IPv6 multicast routes. All
1009 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
1010 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
1011 * can be IPv4 or IPv6, but all must be of the same form in a single
1012 * command. To display the current set of routes, use the commands
1013 * '<em>show ip mfib</em>' and '<em>show ip6 mfib</em>'.
1014 * The full set of support flags for interfaces and route is shown via;
1015 * '<em>show mfib route flags</em>' and '<em>show mfib itf flags</em>'
1018 * Example of how to add a forwarding interface to a route (and create the
1019 * route if it does not exist)
1020 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/0 Forward}
1021 * Example of how to add an accepting interface to a route (and create the
1022 * route if it does not exist)
1023 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/1 Accept}
1024 * Example of changing the route's flags to send signals via the API
1025 * @cliexcmd{ip mroute add 232.1.1.1 Signal}
1029 VLIB_CLI_COMMAND (ip_mroute_command, static) =
1031 .path = "ip mroute",
1032 .short_help = "ip mroute [add|del] <dst-ip-addr>/<width> [table <table-id>] [rpf-id <ID>] [via <next-hop-ip-addr> [<interface>],",
1033 .function = vnet_ip_mroute_cmd,
1039 * fd.io coding-style-patch-verification: ON
1042 * eval: (c-set-style "gnu")