2 * Copyright (c) 2015 Cisco and/or its affiliates.
3 * Licensed under the Apache License, Version 2.0 (the "License");
4 * you may not use this file except in compliance with the License.
5 * You may obtain a copy of the License at:
7 * http://www.apache.org/licenses/LICENSE-2.0
9 * Unless required by applicable law or agreed to in writing, software
10 * distributed under the License is distributed on an "AS IS" BASIS,
11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 * See the License for the specific language governing permissions and
13 * limitations under the License.
16 * ip/ip_lookup.c: ip4/6 adjacency and lookup table management
18 * Copyright (c) 2008 Eliot Dresselhaus
20 * Permission is hereby granted, free of charge, to any person obtaining
21 * a copy of this software and associated documentation files (the
22 * "Software"), to deal in the Software without restriction, including
23 * without limitation the rights to use, copy, modify, merge, publish,
24 * distribute, sublicense, and/or sell copies of the Software, and to
25 * permit persons to whom the Software is furnished to do so, subject to
26 * the following conditions:
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
35 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
36 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
37 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
40 #include <vnet/ip/ip.h>
41 #include <vnet/adj/adj.h>
42 #include <vnet/fib/fib_table.h>
43 #include <vnet/fib/ip4_fib.h>
44 #include <vnet/fib/ip6_fib.h>
45 #include <vnet/mpls/mpls.h>
46 #include <vnet/mfib/mfib_table.h>
47 #include <vnet/dpo/drop_dpo.h>
48 #include <vnet/dpo/classify_dpo.h>
49 #include <vnet/dpo/punt_dpo.h>
50 #include <vnet/dpo/receive_dpo.h>
51 #include <vnet/dpo/ip_null_dpo.h>
55 * @brief IPv4 and IPv6 adjacency and lookup table management.
60 ip_sw_interface_add_del (vnet_main_t * vnm, u32 sw_if_index, u32 is_add)
62 vec_validate_init_empty (ip4_main.
63 lookup_main.if_address_pool_index_by_sw_if_index,
65 vec_validate_init_empty (ip6_main.
66 lookup_main.if_address_pool_index_by_sw_if_index,
72 VNET_SW_INTERFACE_ADD_DEL_FUNCTION (ip_sw_interface_add_del);
75 ip_lookup_init (ip_lookup_main_t * lm, u32 is_ip6)
77 if (!lm->fib_result_n_bytes)
78 lm->fib_result_n_bytes = sizeof (uword);
81 mhash_init (&lm->prefix_to_if_prefix_index, sizeof (uword),
82 sizeof (ip_interface_prefix_key_t));
85 lm->format_address_and_length = format_ip6_address_and_length;
86 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
87 sizeof (ip6_address_fib_t));
91 lm->format_address_and_length = format_ip4_address_and_length;
92 mhash_init (&lm->address_to_if_address_index, sizeof (uword),
93 sizeof (ip4_address_fib_t));
99 /* Setup all IP protocols to be punted and builtin-unknown. */
100 for (i = 0; i < 256; i++)
102 lm->local_next_by_ip_protocol[i] = IP_LOCAL_NEXT_PUNT;
103 lm->builtin_protocol_by_ip_protocol[i] = IP_BUILTIN_PROTOCOL_UNKNOWN;
106 lm->local_next_by_ip_protocol[IP_PROTOCOL_UDP] = IP_LOCAL_NEXT_UDP_LOOKUP;
107 lm->local_next_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
108 IP_PROTOCOL_ICMP] = IP_LOCAL_NEXT_ICMP;
109 lm->builtin_protocol_by_ip_protocol[IP_PROTOCOL_UDP] =
110 IP_BUILTIN_PROTOCOL_UDP;
111 lm->builtin_protocol_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 :
113 IP_BUILTIN_PROTOCOL_ICMP;
118 format_ip_flow_hash_config (u8 * s, va_list * args)
120 flow_hash_config_t flow_hash_config = va_arg (*args, u32);
123 if (flow_hash_config & v) \
124 s = format (s, "%s ", #n);
125 foreach_flow_hash_bit;
132 format_ip_adjacency_packet_data (u8 * s, va_list * args)
134 u8 *packet_data = va_arg (*args, u8 *);
135 u32 n_packet_data_bytes = va_arg (*args, u32);
137 s = format (s, "%U", format_hex_bytes, packet_data, n_packet_data_bytes);
143 unformat_dpo (unformat_input_t * input, va_list * args)
145 dpo_id_t *dpo = va_arg (*args, dpo_id_t *);
146 fib_protocol_t fp = va_arg (*args, int);
149 proto = fib_proto_to_dpo (fp);
151 if (unformat (input, "drop"))
152 dpo_copy (dpo, drop_dpo_get (proto));
153 else if (unformat (input, "punt"))
154 dpo_copy (dpo, punt_dpo_get (proto));
155 else if (unformat (input, "local"))
156 receive_dpo_add_or_lock (proto, ~0, NULL, dpo);
157 else if (unformat (input, "null-send-unreach"))
158 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_UNREACH, dpo);
159 else if (unformat (input, "null-send-prohibit"))
160 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_PROHIBIT, dpo);
161 else if (unformat (input, "null"))
162 ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_NONE, dpo);
163 else if (unformat (input, "classify"))
165 u32 classify_table_index;
167 if (!unformat (input, "%d", &classify_table_index))
169 clib_warning ("classify adj must specify table index");
173 dpo_set (dpo, DPO_CLASSIFY, proto,
174 classify_dpo_create (proto, classify_table_index));
182 const ip46_address_t zero_addr = {
187 static clib_error_t *
188 vnet_ip_route_cmd (vlib_main_t * vm,
189 unformat_input_t * main_input, vlib_cli_command_t * cmd)
191 unformat_input_t _line_input, *line_input = &_line_input;
192 u32 table_id, is_del, fib_index, payload_proto;
193 dpo_id_t dpo = DPO_INVALID, *dpos = NULL;
194 fib_route_path_t *rpaths = NULL, rpath;
195 fib_prefix_t *prefixs = NULL, pfx;
196 clib_error_t *error = NULL;
203 clib_memset (&pfx, 0, sizeof (pfx));
205 /* Get a line of input. */
206 if (!unformat_user (main_input, unformat_line_input, line_input))
209 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
211 clib_memset (&rpath, 0, sizeof (rpath));
213 if (unformat (line_input, "table %d", &table_id))
215 else if (unformat (line_input, "count %f", &count))
218 else if (unformat (line_input, "%U/%d",
219 unformat_ip4_address, &pfx.fp_addr.ip4, &pfx.fp_len))
221 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
222 vec_add1 (prefixs, pfx);
224 else if (unformat (line_input, "%U/%d",
225 unformat_ip6_address, &pfx.fp_addr.ip6, &pfx.fp_len))
227 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
228 vec_add1 (prefixs, pfx);
230 else if (unformat (line_input, "via %U",
231 unformat_fib_route_path, &rpath, &payload_proto))
233 vec_add1 (rpaths, rpath);
235 else if (vec_len (prefixs) > 0 &&
236 unformat (line_input, "via %U",
237 unformat_dpo, &dpo, prefixs[0].fp_proto))
239 vec_add1 (dpos, dpo);
241 else if (unformat (line_input, "del"))
243 else if (unformat (line_input, "add"))
247 error = unformat_parse_error (line_input);
252 if (vec_len (prefixs) == 0)
255 clib_error_return (0, "expected ip4/ip6 destination address/length.");
259 if (!is_del && vec_len (rpaths) + vec_len (dpos) == 0)
261 error = clib_error_return (0, "expected paths.");
268 * if no table_id is passed we will manipulate the default
274 fib_index = fib_table_find (prefixs[0].fp_proto, table_id);
278 error = clib_error_return (0, "Nonexistent table id %d", table_id);
283 for (i = 0; i < vec_len (prefixs); i++)
285 if (is_del && 0 == vec_len (rpaths))
287 fib_table_entry_delete (fib_index, &prefixs[i], FIB_SOURCE_CLI);
289 else if (!is_del && 1 == vec_len (dpos))
291 fib_table_entry_special_dpo_add (fib_index,
294 FIB_ENTRY_FLAG_EXCLUSIVE,
296 dpo_reset (&dpos[0]);
298 else if (vec_len (dpos) > 0)
301 clib_error_return (0,
302 "Load-balancing over multiple special adjacencies is unsupported");
305 else if (0 < vec_len (rpaths))
308 ip46_address_t dst = prefixs[i].fp_addr;
311 t[0] = vlib_time_now (vm);
312 incr = 1 << ((FIB_PROTOCOL_IP4 == prefixs[0].fp_proto ? 32 : 128) -
315 for (k = 0; k < n; k++)
317 fib_prefix_t rpfx = {
318 .fp_len = prefixs[i].fp_len,
319 .fp_proto = prefixs[i].fp_proto,
324 fib_table_entry_path_remove2 (fib_index,
325 &rpfx, FIB_SOURCE_CLI, rpaths);
327 fib_table_entry_path_add2 (fib_index,
330 FIB_ENTRY_FLAG_NONE, rpaths);
332 if (FIB_PROTOCOL_IP4 == prefixs[0].fp_proto)
335 clib_host_to_net_u32 (incr +
336 clib_net_to_host_u32 (dst.
341 int bucket = (incr < 64 ? 0 : 1);
342 dst.ip6.as_u64[bucket] =
343 clib_host_to_net_u64 (incr +
344 clib_net_to_host_u64 (dst.ip6.as_u64
349 t[1] = vlib_time_now (vm);
351 vlib_cli_output (vm, "%.6e routes/sec", count / (t[1] - t[0]));
355 error = clib_error_return (0, "Don't understand what you want...");
364 unformat_free (line_input);
369 vnet_ip_table_cmd (vlib_main_t * vm,
370 unformat_input_t * main_input,
371 vlib_cli_command_t * cmd, fib_protocol_t fproto)
373 unformat_input_t _line_input, *line_input = &_line_input;
374 clib_error_t *error = NULL;
375 u32 table_id, is_add;
381 /* Get a line of input. */
382 if (!unformat_user (main_input, unformat_line_input, line_input))
385 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
387 if (unformat (line_input, "%d", &table_id))
389 else if (unformat (line_input, "del"))
391 else if (unformat (line_input, "add"))
393 else if (unformat (line_input, "name %s", &name))
397 error = unformat_parse_error (line_input);
404 error = clib_error_return (0, "No table id");
407 else if (0 == table_id)
409 error = clib_error_return (0, "Can't change the default table");
416 ip_table_create (fproto, table_id, 0, name);
420 ip_table_delete (fproto, table_id, 0);
425 unformat_free (line_input);
430 vnet_ip4_table_cmd (vlib_main_t * vm,
431 unformat_input_t * main_input, vlib_cli_command_t * cmd)
433 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4));
437 vnet_ip6_table_cmd (vlib_main_t * vm,
438 unformat_input_t * main_input, vlib_cli_command_t * cmd)
440 return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6));
444 VLIB_CLI_COMMAND (vlib_cli_ip_command, static) = {
446 .short_help = "Internet protocol (IP) commands",
451 VLIB_CLI_COMMAND (vlib_cli_ip6_command, static) = {
453 .short_help = "Internet protocol version 6 (IPv6) commands",
458 VLIB_CLI_COMMAND (vlib_cli_show_ip_command, static) = {
460 .short_help = "Internet protocol (IP) show commands",
465 VLIB_CLI_COMMAND (vlib_cli_show_ip6_command, static) = {
467 .short_help = "Internet protocol version 6 (IPv6) show commands",
472 * This command is used to add or delete IPv4 or IPv6 routes. All
473 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
474 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
475 * can be IPv4 or IPv6, but all must be of the same form in a single
476 * command. To display the current set of routes, use the commands
477 * '<em>show ip fib</em>' and '<em>show ip6 fib</em>'.
480 * Example of how to add a straight forward static route:
481 * @cliexcmd{ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
482 * Example of how to delete a straight forward static route:
483 * @cliexcmd{ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0}
484 * Mainly for route add/del performance testing, one can add or delete
485 * multiple routes by adding 'count N' to the previous item:
486 * @cliexcmd{ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0}
487 * Add multiple routes for the same destination to create equal-cost multipath:
488 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0}
489 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0}
490 * For unequal-cost multipath, specify the desired weights. This
491 * combination of weights results in 3/4 of the traffic following the
492 * second path, 1/4 following the first path:
493 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1}
494 * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3}
495 * To add a route to a particular FIB table (VRF), use:
496 * @cliexcmd{ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0}
499 VLIB_CLI_COMMAND (ip_route_command, static) = {
501 .short_help = "ip route [add|del] [count <n>] <dst-ip-addr>/<width> [table <table-id>] via [next-hop-address] [next-hop-interface] [next-hop-table <value>] [weight <value>] [preference <value>] [udp-encap-id <value>] [ip4-lookup-in-table <value>] [ip6-lookup-in-table <value>] [mpls-lookup-in-table <value>] [resolve-via-host] [resolve-via-connected] [rx-ip4 <interface>] [out-labels <value value value>]",
502 .function = vnet_ip_route_cmd,
508 * This command is used to add or delete IPv4 Tables. All
509 * Tables must be explicitly added before that can be used. Creating a
510 * table will add both unicast and multicast FIBs
514 VLIB_CLI_COMMAND (ip4_table_command, static) = {
516 .short_help = "ip table [add|del] <table-id>",
517 .function = vnet_ip4_table_cmd,
523 * This command is used to add or delete IPv4 Tables. All
524 * Tables must be explicitly added before that can be used. Creating a
525 * table will add both unicast and multicast FIBs
529 VLIB_CLI_COMMAND (ip6_table_command, static) = {
531 .short_help = "ip6 table [add|del] <table-id>",
532 .function = vnet_ip6_table_cmd,
535 static clib_error_t *
536 ip_table_bind_cmd (vlib_main_t * vm,
537 unformat_input_t * input,
538 vlib_cli_command_t * cmd,
539 fib_protocol_t fproto)
541 vnet_main_t *vnm = vnet_get_main ();
542 clib_error_t *error = 0;
543 u32 sw_if_index, table_id;
548 if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
550 error = clib_error_return (0, "unknown interface `%U'",
551 format_unformat_error, input);
555 if (unformat (input, "%d", &table_id))
559 error = clib_error_return (0, "expected table id `%U'",
560 format_unformat_error, input);
564 rv = ip_table_bind (fproto, sw_if_index, table_id, 0);
566 if (VNET_API_ERROR_ADDRESS_FOUND_FOR_INTERFACE == rv)
568 error = clib_error_return (0, "IP addresses are still present on %U",
569 format_vnet_sw_if_index_name,
573 else if (VNET_API_ERROR_NO_SUCH_FIB == rv)
575 error = clib_error_return (0, "no such table %d", table_id);
579 error = clib_error_return (0, "unknown error");
586 static clib_error_t *
587 ip4_table_bind_cmd (vlib_main_t * vm,
588 unformat_input_t * input,
589 vlib_cli_command_t * cmd)
591 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP4));
594 static clib_error_t *
595 ip6_table_bind_cmd (vlib_main_t * vm,
596 unformat_input_t * input,
597 vlib_cli_command_t * cmd)
599 return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP6));
603 * Place the indicated interface into the supplied IPv4 FIB table (also known
604 * as a VRF). The FIB table must be created using "ip table add" already. To
605 * display the current IPv4 FIB table, use the command '<em>show ip fib</em>'.
606 * FIB table will only be displayed if a route has been added to the table, or
607 * an IP Address is assigned to an interface in the table (which adds a route
610 * @note IP addresses added after setting the interface IP table are added to
611 * the indicated FIB table. If an IP address is added prior to changing the
612 * table then this is an error. The control plane must remove these addresses
613 * first and then change the table. VPP will not automatically move the
614 * addresses from the old to the new table as it does not know the validity
618 * Example of how to add an interface to an IPv4 FIB table (where 2 is the table-id):
619 * @cliexcmd{set interface ip table GigabitEthernet2/0/0 2}
622 VLIB_CLI_COMMAND (set_interface_ip_table_command, static) =
624 .path = "set interface ip table",
625 .function = ip4_table_bind_cmd,
626 .short_help = "set interface ip table <interface> <table-id>",
631 * Place the indicated interface into the supplied IPv6 FIB table (also known
632 * as a VRF). The FIB table must be created using "ip6 table add" already. To
633 * display the current IPv6 FIB table, use the command '<em>show ip6 fib</em>'.
634 * FIB table will only be displayed if a route has been added to the table, or
635 * an IP Address is assigned to an interface in the table (which adds a route
638 * @note IP addresses added after setting the interface IP table are added to
639 * the indicated FIB table. If an IP address is added prior to changing the
640 * table then this is an error. The control plane must remove these addresses
641 * first and then change the table. VPP will not automatically move the
642 * addresses from the old to the new table as it does not know the validity
646 * Example of how to add an interface to an IPv6 FIB table (where 2 is the table-id):
647 * @cliexcmd{set interface ip6 table GigabitEthernet2/0/0 2}
650 VLIB_CLI_COMMAND (set_interface_ip6_table_command, static) =
652 .path = "set interface ip6 table",
653 .function = ip6_table_bind_cmd,
654 .short_help = "set interface ip6 table <interface> <table-id>"
659 vnet_ip_mroute_cmd (vlib_main_t * vm,
660 unformat_input_t * main_input, vlib_cli_command_t * cmd)
662 unformat_input_t _line_input, *line_input = &_line_input;
663 fib_route_path_t rpath, *rpaths = NULL;
664 clib_error_t *error = NULL;
665 u32 table_id, is_del, payload_proto;
668 mfib_entry_flags_t eflags = 0;
669 u32 gcount, scount, ss, gg, incr;
671 u32 rpf_id = MFIB_RPF_ID_NONE;
676 clib_memset (&pfx, 0, sizeof (pfx));
677 clib_memset (&rpath, 0, sizeof (rpath));
678 rpath.frp_sw_if_index = ~0;
680 /* Get a line of input. */
681 if (!unformat_user (main_input, unformat_line_input, line_input))
684 while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
686 if (unformat (line_input, "table %d", &table_id))
688 else if (unformat (line_input, "del"))
690 else if (unformat (line_input, "add"))
692 else if (unformat (line_input, "rpf-id %d", &rpf_id))
694 else if (unformat (line_input, "scount %d", &scount))
696 else if (unformat (line_input, "gcount %d", &gcount))
698 else if (unformat (line_input, "%U %U",
699 unformat_ip4_address,
700 &pfx.fp_src_addr.ip4,
701 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
703 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
706 else if (unformat (line_input, "%U %U",
707 unformat_ip6_address,
708 &pfx.fp_src_addr.ip6,
709 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
711 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
714 else if (unformat (line_input, "%U/%d",
715 unformat_ip4_address,
716 &pfx.fp_grp_addr.ip4, &pfx.fp_len))
718 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
719 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
721 else if (unformat (line_input, "%U/%d",
722 unformat_ip6_address,
723 &pfx.fp_grp_addr.ip6, &pfx.fp_len))
725 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
726 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
728 else if (unformat (line_input, "%U",
729 unformat_ip4_address, &pfx.fp_grp_addr.ip4))
731 clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4));
732 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4;
735 else if (unformat (line_input, "%U",
736 unformat_ip6_address, &pfx.fp_grp_addr.ip6))
738 clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6));
739 payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6;
742 else if (unformat (line_input, "via local Forward"))
744 clib_memset (&rpath.frp_addr, 0, sizeof (rpath.frp_addr));
745 rpath.frp_sw_if_index = ~0;
746 rpath.frp_weight = 1;
747 rpath.frp_flags |= FIB_ROUTE_PATH_LOCAL;
749 * set the path proto appropriately for the prefix
751 rpath.frp_proto = fib_proto_to_dpo (pfx.fp_proto);
752 rpath.frp_mitf_flags = MFIB_ITF_FLAG_FORWARD;
754 vec_add1 (rpaths, rpath);
756 else if (unformat (line_input, "via %U",
757 unformat_fib_route_path, &rpath, &payload_proto))
759 vec_add1 (rpaths, rpath);
761 else if (unformat (line_input, "%U",
762 unformat_mfib_entry_flags, &eflags))
766 error = unformat_parse_error (line_input);
774 * if no table_id is passed we will manipulate the default
780 fib_index = mfib_table_find (pfx.fp_proto, table_id);
784 error = clib_error_return (0, "Nonexistent table id %d", table_id);
789 timet[0] = vlib_time_now (vm);
791 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
793 incr = 1 << (32 - (pfx.fp_len % 32));
797 incr = 1 << (128 - (pfx.fp_len % 128));
800 for (ss = 0; ss < scount; ss++)
802 for (gg = 0; gg < gcount; gg++)
804 if (is_del && 0 == vec_len (rpaths))
806 /* no path provided => route delete */
807 mfib_table_entry_delete (fib_index, &pfx, MFIB_SOURCE_CLI);
809 else if (eflags || (MFIB_RPF_ID_NONE != rpf_id))
811 mfib_table_entry_update (fib_index, &pfx, MFIB_SOURCE_CLI,
817 mfib_table_entry_path_remove (fib_index,
818 &pfx, MFIB_SOURCE_CLI, rpaths);
820 mfib_table_entry_path_update (fib_index,
821 &pfx, MFIB_SOURCE_CLI, rpaths);
824 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
826 pfx.fp_grp_addr.ip4.as_u32 =
827 clib_host_to_net_u32 (incr +
828 clib_net_to_host_u32 (pfx.
834 int bucket = (incr < 64 ? 0 : 1);
835 pfx.fp_grp_addr.ip6.as_u64[bucket] =
836 clib_host_to_net_u64 (incr +
837 clib_net_to_host_u64 (pfx.
838 fp_grp_addr.ip6.as_u64
843 if (FIB_PROTOCOL_IP4 == pfx.fp_proto)
845 pfx.fp_src_addr.ip4.as_u32 =
846 clib_host_to_net_u32 (1 +
847 clib_net_to_host_u32 (pfx.fp_src_addr.
852 pfx.fp_src_addr.ip6.as_u64[1] =
853 clib_host_to_net_u64 (1 +
854 clib_net_to_host_u64 (pfx.fp_src_addr.
859 timet[1] = vlib_time_now (vm);
861 if (scount > 1 || gcount > 1)
862 vlib_cli_output (vm, "%.6e routes/sec",
863 (scount * gcount) / (timet[1] - timet[0]));
867 unformat_free (line_input);
873 * This command is used to add or delete IPv4 or IPv6 multicast routes. All
874 * IP Addresses ('<em><dst-ip-addr>/<width></em>',
875 * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>')
876 * can be IPv4 or IPv6, but all must be of the same form in a single
877 * command. To display the current set of routes, use the commands
878 * '<em>show ip mfib</em>' and '<em>show ip6 mfib</em>'.
879 * The full set of support flags for interfaces and route is shown via;
880 * '<em>show mfib route flags</em>' and '<em>show mfib itf flags</em>'
883 * Example of how to add a forwarding interface to a route (and create the
884 * route if it does not exist)
885 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/0 Forward}
886 * Example of how to add an accepting interface to a route (and create the
887 * route if it does not exist)
888 * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/1 Accept}
889 * Example of changing the route's flags to send signals via the API
890 * @cliexcmd{ip mroute add 232.1.1.1 Signal}
894 VLIB_CLI_COMMAND (ip_mroute_command, static) =
897 .short_help = "ip mroute [add|del] <dst-ip-addr>/<width> [table <table-id>] [rpf-id <ID>] [via <next-hop-ip-addr> [<interface>],",
898 .function = vnet_ip_mroute_cmd,
904 * fd.io coding-style-patch-verification: ON
907 * eval: (c-set-style "gnu")