1 /* Hey Emacs use -*- mode: C -*- */
3 * Copyright (c) 2016 Cisco and/or its affiliates.
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at:
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
17 /** \brief Reply to l2_xconnect_dump
18 @param context - sender context which was passed in the request
19 @param rx_sw_if_index - Receive interface index
20 @param tx_sw_if_index - Transmit interface index
22 define l2_xconnect_details
29 /** \brief Dump L2 XConnects
30 @param client_index - opaque cookie to identify the sender
31 @param context - sender context, to match reply w/ request
33 define l2_xconnect_dump
39 /** \brief l2 fib table entry structure
40 @param bd_id - the l2 fib / bridge domain table id
41 @param mac - the entry's mac address
42 @param sw_if_index - index of the interface
43 @param static_mac - the entry is statically configured.
44 @param filter_mac - the entry is a mac filter entry.
45 @param bvi_mac - the mac address is a bridge virtual interface
47 define l2_fib_table_entry
58 /** \brief Dump l2 fib (aka bridge domain) table
59 @param client_index - opaque cookie to identify the sender
60 @param bd_id - the l2 fib / bridge domain table identifier
62 define l2_fib_table_dump
69 /** \brief L2 fib clear table request, clear all mac entries in the l2 fib
70 @param client_index - opaque cookie to identify the sender
71 @param context - sender context, to match reply w/ request
73 autoreply define l2_fib_clear_table
79 /** \brief L2 FIB flush bridge domain entries
80 @param client_index - opaque cookie to identify the sender
81 @param context - sender context, to match reply w/ request
82 @param bd_id - the entry's bridge domain id
84 autoreply define l2fib_flush_bd
91 /** \brief L2 FIB flush interface entries
92 @param client_index - opaque cookie to identify the sender
93 @param context - sender context, to match reply w/ request
94 @param bd_id - the entry's bridge domain id
96 autoreply define l2fib_flush_int
103 /** \brief L2 FIB add entry request
104 @param client_index - opaque cookie to identify the sender
105 @param context - sender context, to match reply w/ request
106 @param mac - the entry's mac address
107 @param bd_id - the entry's bridge domain id
108 @param sw_if_index - the interface
109 @param is_add - If non zero add the entry, else delete it
113 autoreply define l2fib_add_del
126 /** \brief Set L2 flags request !!! TODO - need more info, feature bits in l2_input.h
127 @param client_index - opaque cookie to identify the sender
128 @param context - sender context, to match reply w/ request
129 @param sw_if_index - interface
130 @param is_set - if non-zero, set the bits, else clear them
131 @param feature_bitmap - non-zero bits to set or clear
142 /** \brief Set L2 bits response
143 @param context - sender context, to match reply w/ request
144 @param retval - return code for the set l2 bits request
146 define l2_flags_reply
150 u32 resulting_feature_bitmap;
153 /** \brief L2 bridge domain set mac age
154 @param client_index - opaque cookie to identify the sender
155 @param context - sender context, to match reply w/ request
156 @param bd_id - the bridge domain to create
157 @param mac_age - mac aging time in min, 0 for disabled
159 autoreply define bridge_domain_set_mac_age
167 /** \brief L2 bridge domain add or delete request
168 @param client_index - opaque cookie to identify the sender
169 @param context - sender context, to match reply w/ request
170 @param bd_id - the bridge domain to create
171 @param flood - enable/disable bcast/mcast flooding in the bd
172 @param uu_flood - enable/disable uknown unicast flood in the bd
173 @param forward - enable/disable forwarding on all interfaces in the bd
174 @param learn - enable/disable learning on all interfaces in the bd
175 @param arp_term - enable/disable arp termination in the bd
176 @param mac_age - mac aging time in min, 0 for disabled
177 @param is_add - add or delete flag
179 autoreply define bridge_domain_add_del
193 /** \brief L2 bridge domain request operational state details
194 @param client_index - opaque cookie to identify the sender
195 @param context - sender context, to match reply w/ request
196 @param bd_id - the bridge domain id desired or ~0 to request all bds
198 define bridge_domain_dump
205 /** \brief L2 bridge domain operational state response
206 @param bd_id - the bridge domain id
207 @param flood - bcast/mcast flooding state on all interfaces in the bd
208 @param uu_flood - uknown unicast flooding state on all interfaces in the bd
209 @param forward - forwarding state on all interfaces in the bd
210 @param learn - learning state on all interfaces in the bd
211 @param arp_term - arp termination state on all interfaces in the bd
212 @param mac_age - mac aging time in min, 0 for disabled
213 @param n_sw_ifs - number of sw_if_index's in the domain
215 define bridge_domain_details
229 /** \brief L2 bridge domain sw interface operational state response
230 @param bd_id - the bridge domain id
231 @param sw_if_index - sw_if_index in the domain
232 @param shg - split horizon group for the interface
234 define bridge_domain_sw_if_details
242 /** \brief Set bridge flags (such as L2_LEARN, L2_FWD, L2_FLOOD,
243 L2_UU_FLOOD, or L2_ARP_TERM) request
244 @param client_index - opaque cookie to identify the sender
245 @param context - sender context, to match reply w/ request
246 @param bd_id - the bridge domain to set the flags for
247 @param is_set - if non-zero, set the flags, else clear them
248 @param feature_bitmap - bits that are non-zero to set or clear
259 /** \brief Set bridge flags response
260 @param context - sender context, to match reply w/ request
261 @param retval - return code for the set bridge flags request
262 @param resulting_feature_bitmap - the feature bitmap value after the request is implemented
264 define bridge_flags_reply
268 u32 resulting_feature_bitmap;
271 /** \brief L2 interface vlan tag rewrite configure request
272 @param client_index - opaque cookie to identify the sender
273 @param context - sender context, to match reply w/ request
274 @param sw_if_index - interface the operation is applied to
275 @param vtr_op - Choose from l2_vtr_op_t enum values
276 @param push_dot1q - first pushed flag dot1q id set, else dot1ad
277 @param tag1 - Needed for any push or translate vtr op
278 @param tag2 - Needed for any push 2 or translate x-2 vtr ops
280 autoreply define l2_interface_vlan_tag_rewrite
286 u32 push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad
287 u32 tag1; // first pushed tag
288 u32 tag2; // second pushed tag
291 /** \brief L2 interface pbb tag rewrite configure request
292 @param client_index - opaque cookie to identify the sender
293 @param context - sender context, to match reply w/ request
294 @param sw_if_index - interface the operation is applied to
295 @param vtr_op - Choose from l2_vtr_op_t enum values
296 @param inner_tag - needed for translate_qinq vtr op only
297 @param outer_tag - needed for translate_qinq vtr op only
298 @param b_dmac - B-tag remote mac address, needed for any push or translate_qinq vtr op
299 @param b_smac - B-tag local mac address, needed for any push or translate qinq vtr op
300 @param b_vlanid - B-tag vlanid, needed for any push or translate qinq vtr op
301 @param i_sid - I-tag service id, needed for any push or translate qinq vtr op
303 autoreply define l2_interface_pbb_tag_rewrite
318 * eval: (c-set-style "gnu")