HONEYCOMB-10: Add missing context parameter to *details structs
[vpp.git] / vpp / api / vpe.api
1 /* Hey Emacs use -*- mode: C -*- */
2 /*
3  * Copyright (c) 2015 Cisco and/or its affiliates.
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at:
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 /** \file
18
19     This file defines vpe control-plane API messages which are generally
20     called through a shared memory interface. 
21 */
22
23
24 /** \brief Register for interface events
25     @param client_index - opaque cookie to identify the sender
26     @param context - sender context, to match reply w/ request
27     @param enable_disable - 1 => register for events, 0 => cancel registration
28     @param pid - sender's pid
29 */
30 define want_interface_events {
31     u32 client_index;
32     u32 context;
33     u32 enable_disable;
34     u32 pid;
35 };
36
37 /** \brief Reply for interface events registration
38     @param context - returned sender context, to match reply w/ request
39     @param retval - return code
40 */
41 define want_interface_events_reply {
42     u32 context;
43     i32 retval;
44 };
45
46 /** \brief Interface details structure (fix this) 
47     @param sw_if_index - index of the interface
48     @param sup_sw_if_index - index of parent interface if any, else same as sw_if_index  
49     @param l2_address_length - length of the interface's l2 address
50     @param pid - the interface's l2 address
51     @param interface_name - name of the interface
52     @param link_duplex - 1 if half duplex, 2 if full duplex
53     @param link_speed - 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G
54     @param link_MTU - max. transmittion unit 
55     @param sub_if_id - A number 0-N to uniquely identify this subif on super if
56     @param sub_dot1ad -  0 = dot1q, 1=dot1ad
57     @param sub_number_of_tags - Number of tags (0 - 2)
58     @param sub_outer_vlan_id
59     @param sub_inner_vlan_id
60     @param sub_exact_match
61     @param sub_default
62     @param sub_outer_vlan_id_any
63     @param sub_inner_vlan_id_any
64     @param vtr_op - vlan tag rewrite operation
65     @param vtr_push_dot1q
66     @param vtr_tag1
67     @param vtr_tag2
68 */
69 manual_java define sw_interface_details {
70     u32 context;
71     u32 sw_if_index;
72
73     /* index of sup interface (e.g. hw interface).
74        equal to sw_if_index for super hw interface. */
75     u32 sup_sw_if_index;
76
77     /* Layer 2 address, if applicable */
78     u32 l2_address_length;
79     u8 l2_address[8];
80     
81     /* Interface name */
82     u8 interface_name[64];
83
84     /* 1 = up, 0 = down */
85     u8 admin_up_down;
86     u8 link_up_down;
87
88     /* 1 = half duplex, 2 = full duplex */
89     u8 link_duplex;
90
91     /* 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G */
92     u8 link_speed;
93     
94     /* MTU */
95     u16 link_mtu;
96
97     /* Subinterface ID. A number 0-N to uniquely identify this subinterface under the super interface*/
98     u32 sub_id;
99
100     /* 0 = dot1q, 1=dot1ad */
101     u8 sub_dot1ad;
102
103     /* Number of tags 0-2 */
104     u8 sub_number_of_tags;
105     u16 sub_outer_vlan_id;
106     u16 sub_inner_vlan_id;
107     u8 sub_exact_match;
108     u8 sub_default;
109     u8 sub_outer_vlan_id_any;
110     u8 sub_inner_vlan_id_any;
111
112     /* vlan tag rewrite state */
113     u32 vtr_op;
114     u32 vtr_push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad
115     u32 vtr_tag1;       // first pushed tag
116     u32 vtr_tag2;       // second pushed tag
117 };
118
119 /** \brief Set flags on the interface
120     @param client_index - opaque cookie to identify the sender
121     @param context - sender context, to match reply w/ request
122     @param sw_if_index - index of the interface to set flags on
123     @param admin_up_down - set the admin state, 1 = up, 0 = down
124     @param link_up_down - Oper state sent on change event, not used in config.
125     @param deleted - interface was deleted
126 */
127 define sw_interface_set_flags {
128     u32 client_index;
129     u32 context;
130     u32 sw_if_index;
131     /* 1 = up, 0 = down */
132     u8 admin_up_down;
133     u8 link_up_down;
134     u8 deleted;
135 };
136
137 /** \brief Reply to sw_interface_set_flags 
138     @param context - sender context which was passed in the request
139     @param retval - return code of the set flags request
140 */
141 define sw_interface_set_flags_reply {
142     u32 context;
143     i32 retval;
144 };
145
146 /* works */
147 manual_java define sw_interface_dump {
148     u32 client_index;
149     u32 context;
150     u8 name_filter_valid;
151     u8 name_filter[49];
152 };
153
154 /** \brief Set or delete one or all ip addresses on a specified interface
155     @param client_index - opaque cookie to identify the sender
156     @param context - sender context, to match reply w/ request
157     @param sw_if_index - index of the interface to add/del addresses 
158     @param is_add - add address if non-zero, else delete
159     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
160     @param del_all - if non-zero delete all addresses on the interface
161     @param address_length - address length in bytes, 4 for ip4, 16 for ip6
162     @param address - array of address bytes
163 */
164 define sw_interface_add_del_address {
165     u32 client_index;
166     u32 context;
167     u32 sw_if_index;
168     u8 is_add;
169     u8 is_ipv6;
170     u8 del_all;
171     u8 address_length;
172     u8 address[16];
173 };
174
175 /** \brief Reply for interface events registration
176     @param context - returned sender context, to match reply w/ request
177     @param retval - return code
178 */
179 define sw_interface_add_del_address_reply {
180     u32 context;
181     i32 retval;
182 };
183
184 /** \brief Associate the specified interface with a fib table
185     @param client_index - opaque cookie to identify the sender
186     @param context - sender context, to match reply w/ request
187     @param sw_if_index - index of the interface
188     @param is_ipv6 - if non-zero ipv6, else ipv4
189     @param vrf_id - fib table/vrd id to associate the interface with
190 */
191 define sw_interface_set_table {
192     u32 client_index;
193     u32 context;
194     u32 sw_if_index;
195     u8 is_ipv6;
196     u32 vrf_id;
197 };
198
199 /** \brief Reply for interface events registration
200     @param context - returned sender context, to match reply w/ request
201     @param retval - return code
202 */
203 define sw_interface_set_table_reply {
204     u32 context;
205     i32 retval;
206 };
207
208 /** \brief Initialize a new tap interface with the given paramters 
209     @param client_index - opaque cookie to identify the sender
210     @param context - sender context, to match reply w/ request
211     @param use_random_mac - let the system generate a unique mac address
212     @param tap_name - name to associate with the new interface
213     @param mac_address - mac addr to assign to the interface if use_radom not set
214 */
215 define tap_connect {
216     u32 client_index;
217     u32 context;
218     u8 use_random_mac;
219     u8 tap_name [64];
220     u8 mac_address[6];
221     u8 renumber;
222     u32 custom_dev_instance;
223 };
224
225 /** \brief Reply for tap connect request
226     @param context - returned sender context, to match reply w/ request
227     @param retval - return code
228     @param sw_if_index - software index allocated for the new tap interface
229 */
230 define tap_connect_reply {
231     u32 context;
232     i32 retval;
233     u32 sw_if_index;
234 };
235
236 /** \brief Modify a tap interface with the given paramters 
237     @param client_index - opaque cookie to identify the sender
238     @param context - sender context, to match reply w/ request
239     @param sw_if_index - interface index of existing tap interface
240     @param use_random_mac - let the system generate a unique mac address
241     @param tap_name - name to associate with the new interface
242     @param mac_address - mac addr to assign to the interface if use_radom not set
243 */
244 define tap_modify {
245     u32 client_index;
246     u32 context;
247     u32 sw_if_index;
248     u8 use_random_mac;
249     u8 tap_name [64];
250     u8 mac_address[6];
251     u8 renumber;
252     u32 custom_dev_instance;
253 };
254
255 /** \brief Reply for tap modify request
256     @param context - returned sender context, to match reply w/ request
257     @param retval - return code
258     @param sw_if_index - software index if the modified tap interface
259 */
260 define tap_modify_reply {
261     u32 context;
262     i32 retval;
263     u32 sw_if_index;
264 };
265
266 /** \brief Delete tap interface
267     @param client_index - opaque cookie to identify the sender
268     @param context - sender context, to match reply w/ request
269     @param sw_if_index - interface index of existing tap interface
270 */
271 define tap_delete {
272     u32 client_index;
273     u32 context;
274     u32 sw_if_index;
275 };
276
277 /** \brief Reply for tap delete request
278     @param context - returned sender context, to match reply w/ request
279     @param retval - return code
280 */
281 define tap_delete_reply {
282     u32 context;
283     i32 retval;
284 };
285
286 /** \brief Dump tap interfaces request */
287 define sw_interface_tap_dump {
288     u32 client_index;
289     u32 context;
290 };
291
292 /** \brief Reply for tap dump request
293     @param sw_if_index - software index of tap interface
294     @param dev_name - Linux tap device name
295 */
296 manual_java define sw_interface_tap_details {
297     u32 context;
298     u32 sw_if_index;
299     u8 dev_name[64];
300 };
301
302 /** \brief Create a new subinterface with the given vlan id
303     @param client_index - opaque cookie to identify the sender
304     @param context - sender context, to match reply w/ request
305     @param sw_if_index - software index of the new vlan's parent interface
306     @param vlan_id - vlan tag of the new interface
307 */
308 define create_vlan_subif {
309     u32 client_index;
310     u32 context;
311     u32 sw_if_index;
312     u32 vlan_id;
313 };
314
315 /** \brief Reply for the vlan subinterface create request
316     @param context - returned sender context, to match reply w/ request
317     @param retval - return code
318     @param sw_if_index - software index allocated for the new subinterface
319 */
320 define create_vlan_subif_reply {
321     u32 context;
322     i32 retval;
323     u32 sw_if_index;
324 };
325
326 /** \brief Add / del route request
327     @param client_index - opaque cookie to identify the sender
328     @param context - sender context, to match reply w/ request
329     @param sw_if_index - software index of the new vlan's parent interface
330     @param vrf_id - fib table /vrf associated with the route
331     @param lookup_in_vrf - 
332     @param resolve_attempts - 
333     @param classify_table_index - 
334     @param create_vrf_if_needed - 
335     @param resolve_if_needed - 
336     @param is_add - 1 if adding the route, 0 if deleting
337     @param is_drop - 
338     @param is_ipv6 - 0 if an ip4 route, else ip6
339     @param is_local - 
340     @param is_classify - 
341     @param is_multipath - Set to 1 if this is a multipath route, else 0
342     @param not_last - Is last or not last msg in group of multiple add/del msgs
343     @param next_hop_weight - 
344     @param dst_address_length - 
345     @param dst_address[16] - 
346     @param next_hop_address[16] - 
347 */
348 define ip_add_del_route {
349     u32 client_index;
350     u32 context;
351     u32 next_hop_sw_if_index;
352     u32 vrf_id;
353     u32 lookup_in_vrf;
354     u32 resolve_attempts;
355     u32 classify_table_index;
356     u8 create_vrf_if_needed;
357     u8 resolve_if_needed;
358     u8 is_add;
359     u8 is_drop;
360     u8 is_ipv6;
361     u8 is_local;
362     u8 is_classify;
363     /* Is last/not-last message in group of multiple add/del messages. */
364     u8 is_multipath;
365     u8 not_last;
366     u8 next_hop_weight;
367     u8 dst_address_length;
368     u8 dst_address[16];
369     u8 next_hop_address[16];
370 };
371
372 /** \brief Reply for add / del route request
373     @param context - returned sender context, to match reply w/ request
374     @param retval - return code
375 */
376 define ip_add_del_route_reply {
377     u32 context;
378     i32 retval;
379 };
380
381 /* works */
382 /** \brief Add / del gre tunnel request
383     @param client_index - opaque cookie to identify the sender
384     @param context - sender context, to match reply w/ request
385     @param sw_if_index - software index of the new vlan's parent interface
386     @param inner_vrf_id -
387     @param outer_vrf_id - 
388     @param is_add - 1 if adding the tunnel, 0 if deleting
389     @param src_address[4] - tunnel source address
390     @param dst_address[4] - tunnel destination address
391     @param intf_address - 
392     @param intf_address_length - 
393 */
394 define mpls_gre_add_del_tunnel {
395     u32 client_index;
396     u32 context;
397     u32 inner_vrf_id;
398     u32 outer_vrf_id;
399     u8 is_add;
400     u8 l2_only;
401     u8 src_address[4];
402     u8 dst_address[4];
403     u8 intfc_address[4];
404     u8 intfc_address_length;
405 };
406
407 /** \brief Reply for add / del tunnel request
408     @param context - returned sender context, to match reply w/ request
409     @param retval - return code
410 */
411 define mpls_gre_add_del_tunnel_reply {
412     u32 context;
413     i32 retval;
414     u32 tunnel_sw_if_index;
415 };
416
417 /** \brief Add / del MPLS encapsulation request
418     @param client_index - opaque cookie to identify the sender
419     @param context - sender context, to match reply w/ request
420     @param vrf_id - vrf id
421     @param dst_address[4] - 
422     @param is_add - 1 if adding the encap, 0 if deleting
423     @param nlabels - number of labels 
424     @param labels - array of labels
425 */
426 define mpls_add_del_encap {
427     u32 client_index;
428     u32 context;
429     u32 vrf_id;
430     u8 dst_address[4];
431     /* 1 = add, 0 = delete */
432     u8 is_add;
433     u8 nlabels;
434     u32 labels[0];
435 }; 
436
437 /** \brief Reply for add / del encapsulation request
438     @param context - returned sender context, to match reply w/ request
439     @param retval - return code
440 */
441 define mpls_add_del_encap_reply {
442     u32 context;
443     i32 retval;
444 };
445
446 /** \brief Add / del MPLS decapsulation request
447     @param client_index - opaque cookie to identify the sender
448     @param context - sender context, to match reply w/ request
449     @param rx_vrf_id - receive vrf
450     @param tx_vrf_id - transmit vrf
451     @param label - 
452     @param next_index - 
453     @param s_bit - 
454     @param is_add - 1 if adding the encap, 0 if deleting
455 */
456 define mpls_add_del_decap {
457     u32 client_index;
458     u32 context;
459     u32 rx_vrf_id;
460     u32 tx_vrf_id;
461     u32 label;
462     u32 next_index;
463     u8 s_bit;
464     u8 is_add;
465 }; 
466
467 /** \brief Reply for MPLS decap add / del request
468     @param context - returned sender context, to match reply w/ request
469     @param retval - return code
470 */
471 define mpls_add_del_decap_reply {
472     u32 context;
473     i32 retval;
474 };
475
476 /** \brief Proxy ARP add / del request
477     @param client_index - opaque cookie to identify the sender
478     @param context - sender context, to match reply w/ request
479     @param vrf_id - VRF / Fib table ID
480     @param is_add - 1 if adding the Proxy ARP range, 0 if deleting
481     @param low_address[4] - Low address of the Proxy ARP range
482     @param hi_address[4] - High address of the Proxy ARP range
483 */
484 define proxy_arp_add_del {
485     u32 client_index;
486     u32 context;
487     u32 vrf_id;
488     u8 is_add;
489     u8 low_address[4];
490     u8 hi_address[4];
491 };
492
493 /** \brief Reply for proxy arp add / del request
494     @param context - returned sender context, to match reply w/ request
495     @param retval - return code
496 */
497 define proxy_arp_add_del_reply {
498     u32 context;
499     i32 retval;
500 };
501
502 /** \brief Proxy ARP add / del request
503     @param client_index - opaque cookie to identify the sender
504     @param context - sender context, to match reply w/ request
505     @param sw_if_index - Which interface to enable / disable Proxy Arp on
506     @param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable
507 */
508 define proxy_arp_intfc_enable_disable {
509     u32 client_index;
510     u32 context;
511     u32 sw_if_index;
512     /* 1 = on, 0 = off */
513     u8 enable_disable;
514 };
515
516 /** \brief Reply for Proxy ARP interface enable / disable request
517     @param context - returned sender context, to match reply w/ request
518     @param retval - return code
519 */
520 define proxy_arp_intfc_enable_disable_reply {
521     u32 context;
522     i32 retval;
523 };
524
525 /** \brief IP neighbor add / del request
526     @param client_index - opaque cookie to identify the sender
527     @param context - sender context, to match reply w/ request
528     @param vrf_id - vrf_id, only for IP4
529     @param sw_if_index - interface used to reach neighbor
530     @param is_add - 1 to add neighbor, 0 to delete
531     @param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4
532     @param is_static - 
533     @param mac_address - l2 address of the neighbor
534     @param dst_address - ip4 or ip6 address of the neighbor
535 */
536 define ip_neighbor_add_del {
537     u32 client_index;
538     u32 context;
539     u32 vrf_id;                 /* only makes sense for ip4 */
540     u32 sw_if_index;
541     /* 1 = add, 0 = delete */
542     u8 is_add;
543     u8 is_ipv6;
544     u8 is_static;
545     u8 mac_address[6];
546     u8 dst_address[16];
547 };
548
549 /** \brief Reply for IP Neighbor add / delete request
550     @param context - returned sender context, to match reply w/ request
551     @param retval - return code
552 */
553 define ip_neighbor_add_del_reply {
554     u32 context;
555     i32 retval;
556 };
557
558 /** \brief Reset VRF (remove all routes etc) request
559     @param client_index - opaque cookie to identify the sender
560     @param context - sender context, to match reply w/ request
561     @param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4
562     @param vrf_id - ID of th FIB table / VRF to reset
563 */
564 define reset_vrf {
565     u32 client_index;
566     u32 context;
567     u8 is_ipv6;
568     u32 vrf_id;
569 }; 
570
571 /** \brief Reply for Reset VRF request
572     @param context - returned sender context, to match reply w/ request
573     @param retval - return code
574 */
575 define reset_vrf_reply {
576     u32 context;
577     i32 retval;
578 };
579
580 /** \brief Is Address Reachable request - DISABLED
581     @param client_index - opaque cookie to identify the sender
582     @param context - sender context, to match reply w/ request
583     @param next_hop_sw_if_index - index of interface used to get to next hop
584     @param is_ipv6 - 1 for IPv6, 0 for IPv4
585     @param is_error - address not found or does not match intf
586     @param address[] - Address in question 
587 */
588 define is_address_reachable {
589     u32 client_index;           /* (api_main_t *) am->my_client_index */
590     u32 context;
591     u32 next_hop_sw_if_index;
592     u8 is_known;                /* on reply, this is the answer */
593     u8 is_ipv6;
594     u8 is_error;                /* address not found or does not match intf */
595     u8 address[16];
596 };
597
598 /** \brief Want Stats, register for stats updates
599     @param client_index - opaque cookie to identify the sender
600     @param context - sender context, to match reply w/ request
601     @param enable_disable - 1 = enable stats, 0 = disable
602     @param pid - pid of process requesting stats updates
603 */
604 define want_stats {
605     u32 client_index;
606     u32 context;
607     u32 enable_disable;
608     u32 pid;
609 };
610
611 /** \brief Reply for Want Stats request
612     @param context - returned sender context, to match reply w/ request
613     @param retval - return code
614 */
615 manual_java define want_stats_reply {
616     u32 context;
617     i32 retval;
618 };
619
620 /** \brief Want stats counters structure 
621     @param vnet_counter_type- such as ip4, ip6, punts, etc
622     @param is_combined - rx & tx total (all types) counts   
623     @param first_sw_if_index - first sw index in block of index, counts
624     @param count - number of interfaces this stats block includes counters for
625     @param data - contiguous block of vlib_counter_t structures 
626 */
627 manual_java define vnet_interface_counters {
628     /* enums - plural - in vnet/interface.h */
629     u8 vnet_counter_type;
630     u8 is_combined;
631     u32 first_sw_if_index;
632     u32 count;
633     u8 data[0];
634 };
635
636 typeonly manual_print manual_endian define ip4_fib_counter {
637     u32 address;
638     u8 address_length;
639     u64 packets;
640     u64 bytes;
641 };
642
643 manual_java manual_print manual_endian define vnet_ip4_fib_counters {
644     u32 vrf_id;
645     u32 count;
646     vl_api_ip4_fib_counter_t c[0];
647 };
648
649 typeonly manual_print manual_endian define ip6_fib_counter {
650     u64 address[2];
651     u8 address_length;
652     u64 packets;
653     u64 bytes;
654 };
655
656 manual_java manual_print manual_endian define vnet_ip6_fib_counters {
657     u32 vrf_id;
658     u32 count;
659     vl_api_ip6_fib_counter_t c[0];
660 };
661
662 /** \brief Request for a single block of summary stats
663     @param client_index - opaque cookie to identify the sender
664     @param context - sender context, to match reply w/ request
665 */
666 define vnet_get_summary_stats {
667     u32 client_index;
668     u32 context;
669 };
670
671 /** \brief Reply for vnet_get_summary_stats request
672     @param context - sender context, to match reply w/ request
673     @param retval - return code for request
674     @param total_pkts -  
675     @param total_bytes -
676     @param vector_rate - 
677 */
678 define vnet_summary_stats_reply {
679     u32 context;
680     i32 retval;
681     u64 total_pkts[2];
682     u64 total_bytes[2];
683     f64 vector_rate; 
684 };
685
686 /** \brief OAM event structure
687     @param dst_address[] - 
688     @param state
689 */
690 manual_java define oam_event {
691     u8 dst_address[4];
692     u8 state;
693 };
694
695 /** \brief Want OAM events request
696     @param client_index - opaque cookie to identify the sender
697     @param context - sender context, to match reply w/ request
698     @param enable_disable- enable if non-zero, else disable
699     @param pid - pid of the requesting process
700 */
701 define want_oam_events {
702     u32 client_index;
703     u32 context;
704     u32 enable_disable;
705     u32 pid;
706 };
707
708 /** \brief Want OAM events response
709     @param context - sender context, to match reply w/ request
710     @param retval - return code for the want oam stats request
711 */
712 define want_oam_events_reply {
713     u32 context;
714     i32 retval;
715 };
716
717 /** \brief OAM add / del target request
718     @param client_index - opaque cookie to identify the sender
719     @param context - sender context, to match reply w/ request
720     @param vrf_id - vrf_id of the target
721     @param src_address[] - source address to use for the updates 
722     @param dst_address[] - destination address of the target
723     @param is_add - add target if non-zero, else delete
724 */
725 define oam_add_del {
726     u32 client_index;
727     u32 context;
728     u32 vrf_id;
729     u8 src_address[4];
730     u8 dst_address[4];
731     u8 is_add;
732 };
733
734 /** \brief OAM add / del target response
735     @param context - sender context, to match reply w/ request
736     @param retval - return code of the request
737 */
738 define oam_add_del_reply {
739     u32 context;
740     i32 retval;
741 };
742
743 /** \brief Reset fib table request
744     @param client_index - opaque cookie to identify the sender
745     @param context - sender context, to match reply w/ request
746     @param vrf_id - vrf/table id of the fib table to reset
747     @param is_ipv6 - an ipv6 fib to reset if non-zero, else ipv4
748 */
749 define reset_fib {
750     u32 client_index;
751     u32 context;
752     u32 vrf_id;
753     u8 is_ipv6;
754 };
755
756 /** \brief Reset fib response
757     @param context - sender context, to match reply w/ request
758     @param retval - return code for the reset bfib request
759 */
760 define reset_fib_reply {
761     u32 context;
762     i32 retval;
763 };
764
765 /** \brief DHCP Proxy config add / del request
766     @param client_index - opaque cookie to identify the sender
767     @param context - sender context, to match reply w/ request
768     @param vrf_id - vrf id
769     @param if_ipv6 - ipv6 if non-zero, else ipv4
770     @param is_add - add the config if non-zero, else delete
771     @param insert_circuit_id - option82 suboption 1 fib number
772     @param dhcp_server[] - server address
773     @param dhcp_src_address[] - <fix this, need details>
774 */
775 define dhcp_proxy_config {
776     u32 client_index;
777     u32 context;
778     u32 vrf_id;
779     u8 is_ipv6;
780     u8 is_add;
781     u8 insert_circuit_id;
782     u8 dhcp_server[16];
783     u8 dhcp_src_address[16];
784 };
785
786 /** \brief DHCP Proxy config response
787     @param context - sender context, to match reply w/ request
788     @param retval - return code for the request
789 */
790 define dhcp_proxy_config_reply {
791     u32 context;
792     i32 retval;
793 };
794
795 /** \brief DHCP Proxy set / unset vss request
796     @param client_index - opaque cookie to identify the sender
797     @param context - sender context, to match reply w/ request
798     @param tbl_id - table id
799     @param oui - first part of vpn id
800     @param fib_id - second part of vpn id
801     @param is_ipv6 - ip6 if non-zero, else ip4
802     @param is_add - set vss if non-zero, else delete
803 */
804 define dhcp_proxy_set_vss {
805     u32 client_index;
806     u32 context;
807     u32 tbl_id;
808     u32 oui;
809     u32 fib_id;
810     u8 is_ipv6;
811     u8 is_add;
812 };
813
814 /** \brief DHCP proxy set / unset vss response
815     @param context - sender context, to match reply w/ request
816     @param retval - return code for the request
817 */
818 define dhcp_proxy_set_vss_reply {
819     u32 context;
820     i32 retval;
821 };
822
823 /** \brief Set the ip flow hash config for a fib request
824     @param client_index - opaque cookie to identify the sender
825     @param context - sender context, to match reply w/ request
826     @param vrf_id - vrf/fib id
827     @param is_ipv6 - if non-zero the fib is ip6, else ip4
828     @param src - if non-zero include src in flow hash
829     @param dst - if non-zero include dst in flow hash
830     @param sport - if non-zero include sport in flow hash
831     @param dport - if non-zero include dport in flow hash
832     @param proto -if non-zero include proto in flow hash
833     @param reverse - if non-zero include reverse in flow hash
834 */
835 define set_ip_flow_hash {
836     u32 client_index;
837     u32 context;
838     u32 vrf_id;
839     u8 is_ipv6;
840     u8 src;
841     u8 dst;
842     u8 sport;
843     u8 dport;
844     u8 proto;
845     u8 reverse;
846 };
847
848 /** \brief Set the ip flow hash config for a fib response
849     @param context - sender context, to match reply w/ request
850     @param retval - return code for the request
851 */
852 define set_ip_flow_hash_reply {
853     u32 context;
854     i32 retval;
855 };
856
857 /** \brief IPv6 router advertisement config request
858     @param client_index - opaque cookie to identify the sender
859     @param context - sender context, to match reply w/ request
860     @param surpress -
861     @param managed -
862     @param other -
863     @param ll_option -
864     @param send_unicast -
865     @param cease -
866     @param is_no -
867     @param default_router -
868     @param max_interval -
869     @param min_interval -
870     @param lifetime -
871     @param initial_count -
872     @param initial_interval -
873 */
874 define sw_interface_ip6nd_ra_config {
875     u32 client_index;
876     u32 context;
877     u32 sw_if_index;
878     u8 surpress;
879     u8  managed;
880     u8 other;
881     u8 ll_option;
882     u8 send_unicast;
883     u8 cease;
884     u8 is_no;
885     u8 default_router;
886     u32 max_interval;
887     u32 min_interval;
888     u32 lifetime;
889     u32 initial_count;
890     u32 initial_interval;
891 };
892
893 /** \brief IPv6 router advertisement config response
894     @param context - sender context, to match reply w/ request
895     @param retval - return code for the request
896 */
897 define sw_interface_ip6nd_ra_config_reply {
898     u32 context;
899     i32 retval;
900 };
901
902 /** \brief IPv6 router advertisement prefix config request
903     @param client_index - opaque cookie to identify the sender
904     @param context - sender context, to match reply w/ request
905     @param sw_if_index - 
906     @param address[] -
907     @param address_length -
908     @param use_default -
909     @param no_advertise -
910     @param off_link -
911     @param no_autoconfig -
912     @param no_onlink -
913     @param is_no -
914     @param val_lifetime -
915     @param pref_lifetime -
916 */
917 define sw_interface_ip6nd_ra_prefix {
918     u32 client_index;
919     u32 context;
920     u32 sw_if_index;
921     u8 address[16];
922     u8 address_length;
923     u8 use_default;
924     u8 no_advertise;
925     u8 off_link;
926     u8 no_autoconfig;
927     u8 no_onlink;
928     u8 is_no;
929     u32 val_lifetime;
930     u32 pref_lifetime;
931 };
932
933 /** \brief IPv6 router advertisement prefix config response
934     @param context - sender context, to match reply w/ request
935     @param retval - return code for the request
936 */
937 define sw_interface_ip6nd_ra_prefix_reply {
938     u32 context;
939     i32 retval;
940 };
941
942 /** \brief IPv6 interface enable / disable request
943     @param client_index - opaque cookie to identify the sender
944     @param context - sender context, to match reply w/ request
945     @param sw_if_index - interface used to reach neighbor
946     @param enable - if non-zero enable ip6 on interface, else disable
947 */
948 define sw_interface_ip6_enable_disable  {
949     u32 client_index;
950     u32 context;
951     u32 sw_if_index;
952     u8 enable;                        /* set to true if enable*/
953 };
954
955 /** \brief IPv6 interface enable / disable response
956     @param context - sender context, to match reply w/ request
957     @param retval - return code for the request
958 */
959 define  sw_interface_ip6_enable_disable_reply {
960     u32 context;
961     i32 retval;
962 };
963
964 /** \brief IPv6 set link local address on interface request
965     @param client_index - opaque cookie to identify the sender
966     @param context - sender context, to match reply w/ request
967     @param sw_if_index - interface to set link local on
968     @param address[] - the new link local address
969     @param address_length - link local address length
970 */
971 define sw_interface_ip6_set_link_local_address  {
972     u32 client_index;
973     u32 context;
974     u32 sw_if_index;
975     u8 address[16];
976     u8 address_length;
977 };
978
979 /** \brief IPv6 set link local address on interface response
980     @param context - sender context, to match reply w/ request
981     @param retval - error code for the request
982 */
983 define  sw_interface_ip6_set_link_local_address_reply {
984     u32 context;
985     i32 retval;
986 };
987
988 /** \brief Set unnumbered interface add / del request
989     @param client_index - opaque cookie to identify the sender
990     @param context - sender context, to match reply w/ request
991     @param sw_if_index - interface with an IP address
992     @param unnumbered_sw_if_index - interface which will use the address
993     @param is_add - if non-zero set the association, else unset it
994 */
995 define sw_interface_set_unnumbered {
996     u32 client_index;
997     u32 context;
998     u32 sw_if_index;            /* use this intfc address */
999     u32 unnumbered_sw_if_index; /* on this interface */
1000     u8 is_add;
1001 };
1002
1003 /** \brief Set unnumbered interface add / del response
1004     @param context - sender context, to match reply w/ request
1005     @param retval - return code for the request
1006 */
1007 define  sw_interface_set_unnumbered_reply {
1008     u32 context;
1009     i32 retval;
1010 };
1011
1012 /** \brief Create loopback interface request
1013     @param client_index - opaque cookie to identify the sender
1014     @param context - sender context, to match reply w/ request
1015     @param mac_address - mac addr to assign to the interface if none-zero
1016 */
1017 define create_loopback {
1018     u32 client_index;
1019     u32 context;
1020     u8  mac_address[6];
1021 };
1022
1023 /** \brief Create loopback interface response
1024     @param context - sender context, to match reply w/ request
1025     @param sw_if_index - sw index of the interface that was created
1026     @param retval - return code for the request
1027 */
1028 define create_loopback_reply {
1029     u32 context;
1030     i32 retval;
1031     u32 sw_if_index;
1032 };
1033
1034 /** \brief Delete loopback interface request
1035     @param client_index - opaque cookie to identify the sender
1036     @param context - sender context, to match reply w/ request
1037     @param sw_if_index - sw index of the interface that was created
1038 */
1039 define delete_loopback {
1040     u32 client_index;
1041     u32 context;
1042     u32 sw_if_index;
1043 };
1044
1045 /** \brief Delete loopback interface response
1046     @param context - sender context, to match reply w/ request
1047     @param retval - return code for the request
1048 */
1049 define delete_loopback_reply {
1050     u32 context;
1051     i32 retval;
1052 };
1053
1054 /** \brief Control ping from client to api server request
1055     @param client_index - opaque cookie to identify the sender
1056     @param context - sender context, to match reply w/ request
1057 */
1058 manual_java define control_ping {
1059     u32 client_index;
1060     u32 context;
1061 };
1062
1063 /** \brief Control ping from the client to the server response
1064     @param client_index - opaque cookie to identify the sender
1065     @param context - sender context, to match reply w/ request
1066     @param retval - return code for the request
1067     @param vpe_pid - the pid of the vpe, returned by the server
1068 */
1069 manual_java define control_ping_reply {
1070     u32 context;
1071     i32 retval;
1072     u32 client_index;
1073     u32 vpe_pid;
1074 };
1075
1076 /** \brief Process a vpe parser cli string request
1077     @param client_index - opaque cookie to identify the sender
1078     @param context - sender context, to match reply w/ request
1079     @param cmd_in_shmem - pointer to cli command string
1080 */
1081 define cli_request {
1082     u32 client_index;
1083     u32 context;
1084     u64 cmd_in_shmem;
1085 };
1086
1087 /** \brief vpe parser cli string response
1088     @param context - sender context, to match reply w/ request
1089     @param retval - return code for request
1090     @param reply_in_shmem - Reply string from cli processing if any
1091 */
1092 define cli_reply {
1093     u32 context;
1094     u32 retval;
1095     u64 reply_in_shmem;
1096 };
1097
1098 /** \brief Set max allowed ARP or ip6 neighbor entries request
1099     @param client_index - opaque cookie to identify the sender
1100     @param context - sender context, to match reply w/ request
1101     @param is_ipv6 - neighbor limit if non-zero, else ARP limit
1102     @param arp_neighbor_limit - the new limit, defaults are ~ 50k
1103 */
1104 define set_arp_neighbor_limit {
1105     u32 client_index;
1106     u32 context;
1107     u8  is_ipv6;
1108     u32 arp_neighbor_limit;
1109 }; 
1110
1111 /** \brief Set max allowed ARP or ip6 neighbor entries response
1112     @param context - sender context, to match reply w/ request
1113     @param retval - return code for request
1114 */
1115 define set_arp_neighbor_limit_reply {
1116     u32 context;
1117     i32 retval;
1118 };
1119
1120 /** \brief L2 interface patch add / del request
1121     @param client_index - opaque cookie to identify the sender
1122     @param context - sender context, to match reply w/ request
1123     @param rx_sw_if_index - receive side interface 
1124     @param tx_sw_if_index - transmit side interface
1125     @param is_add - if non-zero set up the interface patch, else remove it
1126 */
1127 define l2_patch_add_del {
1128     u32 client_index;
1129     u32 context;
1130     u32 rx_sw_if_index;
1131     u32 tx_sw_if_index;
1132     u8 is_add;
1133 };
1134
1135 /** \brief L2 interface patch add / del response
1136     @param context - sender context, to match reply w/ request
1137     @param retval - return code for the request
1138 */
1139 define l2_patch_add_del_reply {
1140     u32 context;
1141     i32 retval;
1142 };
1143
1144 /** \brief IPv6 segment routing tunnel add / del request
1145     @param client_index - opaque cookie to identify the sender
1146     @param context - sender context, to match reply w/ request
1147     @param is_add - add the tunnel if non-zero, else delete it
1148     @param src_address[] -
1149     @param dst_address[] -
1150     @param dst_mask_width -
1151     @param inner_vrf_id -
1152     @param outer_vrf_id -
1153     @param flags_net_byte_order -
1154     @param n_segments -
1155     @param n_tags -
1156     @param segs_and_tags[] -
1157 */
1158 define sr_tunnel_add_del {
1159     u32 client_index;
1160     u32 context;
1161     u8 is_add;
1162     u8 src_address[16];
1163     u8 dst_address[16];
1164     u8 dst_mask_width;
1165     u32 inner_vrf_id;
1166     u32 outer_vrf_id;
1167     u16 flags_net_byte_order;
1168     u8 n_segments;
1169     u8 n_tags;
1170     u8 segs_and_tags[0];
1171 };
1172
1173 /** \brief IPv6 segment routing tunnel add / del response
1174     @param context - sender context, to match reply w/ request
1175     @param retval - return value for request
1176 */
1177 define sr_tunnel_add_del_reply {
1178     u32 context;
1179     i32 retval;
1180 };
1181
1182 /** \brief Interface set vpath request
1183     @param client_index - opaque cookie to identify the sender
1184     @param context - sender context, to match reply w/ request
1185     @param sw_if_index - interface used to reach neighbor
1186     @param enable - if non-zero enable, else disable
1187 */
1188 define sw_interface_set_vpath {
1189     u32 client_index;
1190     u32 context;
1191     u32 sw_if_index;
1192     u8  enable;
1193 };
1194
1195 /** \brief Interface set vpath response
1196     @param context - sender context, to match reply w/ request
1197     @param retval - return code for the request
1198 */
1199 define sw_interface_set_vpath_reply {
1200     u32 context;
1201     i32 retval;
1202 };
1203
1204 /** \brief MPLS Ethernet add / del tunnel request
1205     @param client_index - opaque cookie to identify the sender
1206     @param context - sender context, to match reply w/ request
1207     @param vrf_id - vrf_id, only for IP4
1208     @param sw_if_index - interface used to reach neighbor
1209     @param is_add - add if set, tunnel delete if 0
1210     @param dst_mac_address - 
1211     @param adj_address - 
1212     @param adj_address_length -
1213 */
1214 define mpls_ethernet_add_del_tunnel {
1215     u32 client_index;
1216     u32 context;
1217     u32 vrf_id;
1218     u32 tx_sw_if_index;
1219     u8 is_add;
1220     u8 l2_only;
1221     u8 dst_mac_address[6];
1222     u8 adj_address[4];
1223     u8 adj_address_length;
1224 };
1225
1226 /** \brief Reply for MPLS Ethernet add / delete tunnel request
1227     @param context - sender context, to match reply w/ request
1228     @param retval - return code for the request
1229 */
1230 define mpls_ethernet_add_del_tunnel_reply {
1231     u32 context;
1232     i32 retval;
1233     u32 tunnel_sw_if_index;
1234 };
1235 /** \brief MPLS Ethernet add/ del tunnel 2
1236     @param client_index - opaque cookie to identify the sender
1237     @param context - sender context, to match reply w/ request
1238     @param inner_vrf_id - 
1239     @param outer_vrf_id - 
1240     @param resolve_attempts - 
1241     @param resolve_opaque - 
1242     @param resolve_if_needed -
1243     @param is_add -
1244     @param adj_address -
1245     @param adj_address_length -
1246     @param next_hop_ip4_address_in_outer_vrf -
1247 */
1248 define mpls_ethernet_add_del_tunnel_2 {
1249    u32 client_index;
1250    u32 context;
1251    u32 inner_vrf_id;
1252    u32 outer_vrf_id;
1253    u32 resolve_attempts;
1254    u32 resolve_opaque;          /* no need to set this */
1255    u8 resolve_if_needed;
1256    u8 is_add;
1257    u8 l2_only;
1258    u8 adj_address[4];
1259    u8 adj_address_length;
1260    u8 next_hop_ip4_address_in_outer_vrf [4];
1261 };
1262
1263 /** \brief MPLS Ethernet add/ del tunnel 2
1264     @param context - sender context, to match reply w/ request
1265     @param retval - return code for add /del request
1266 */
1267 define mpls_ethernet_add_del_tunnel_2_reply {
1268     u32 context;
1269     i32 retval;
1270 };
1271
1272 /** \brief Set L2 XConnect between two interfaces request
1273     @param client_index - opaque cookie to identify the sender
1274     @param context - sender context, to match reply w/ request
1275     @param rx_sw_if_index - Receive interface index
1276     @param tx_sw_if_index - Transmit interface index
1277     @param enable - enable xconnect if not 0, else set to L3 mode
1278 */
1279 define sw_interface_set_l2_xconnect {
1280     u32 client_index;
1281     u32 context;
1282     u32 rx_sw_if_index;
1283     u32 tx_sw_if_index;
1284     u8 enable;
1285 };
1286
1287 /** \brief Set L2 XConnect response
1288     @param context - sender context, to match reply w/ request
1289     @param retval - L2 XConnect request return code
1290 */
1291 define sw_interface_set_l2_xconnect_reply {
1292     u32 context;
1293     i32 retval;
1294 };
1295
1296 /** \brief Interface bridge mode request
1297     @param client_index - opaque cookie to identify the sender
1298     @param context - sender context, to match reply w/ request
1299     @param rx_sw_if_index - the interface
1300     @param bd_id - bridge domain id
1301     @param bvi - Setup interface as a bvi, bridge mode only
1302     @param shg - Shared horizon group, for bridge mode only
1303     @param enable - Enable beige mode if not 0, else set to L3 mode
1304 */
1305 define sw_interface_set_l2_bridge {
1306     u32 client_index;
1307     u32 context;
1308     u32 rx_sw_if_index;
1309     u32 bd_id;
1310     u8 shg;
1311     u8 bvi;
1312     u8 enable;
1313 };
1314
1315 /** \brief Interface bridge mode response
1316     @param context - sender context, to match reply w/ request
1317     @param retval - Bridge mode request return code
1318 */
1319 define sw_interface_set_l2_bridge_reply {
1320     u32 context;
1321     i32 retval;
1322 };
1323
1324 /** \brief L2 FIB add entry request
1325     @param client_index - opaque cookie to identify the sender
1326     @param context - sender context, to match reply w/ request
1327     @param mac - the entry's mac address
1328     @param bd_id - the entry's bridge domain id
1329     @param sw_if_index - the interface
1330     @param is_add - If non zero add the entry, else delete it
1331     @param static_mac - 
1332     @param filter_mac -
1333 */
1334 define l2fib_add_del {
1335     u32 client_index;
1336     u32 context;
1337     u64 mac;
1338     u32 bd_id;
1339     u32 sw_if_index;
1340     u8 is_add;
1341     u8 static_mac;
1342     u8 filter_mac;
1343 };
1344
1345 /** \brief L2 FIB add entry response
1346     @param context - sender context, to match reply w/ request
1347     @param retval - return code for the add l2fib entry request
1348 */
1349 define l2fib_add_del_reply {
1350     u32 context;
1351     i32 retval;
1352 };
1353
1354 /** \brief Set L2 flags request !!! TODO - need more info, feature bits in l2_input.h
1355     @param client_index - opaque cookie to identify the sender
1356     @param context - sender context, to match reply w/ request
1357     @param sw_if_index - interface 
1358     @param is_set - if non-zero, set the bits, else clear them
1359     @param feature_bitmap - non-zero bits to set or clear
1360 */
1361 define l2_flags {
1362     u32 client_index;
1363     u32 context;
1364     u32 sw_if_index;
1365     u8 is_set;
1366     u32 feature_bitmap;
1367 };
1368
1369 /** \brief Set L2 bits response
1370     @param context - sender context, to match reply w/ request
1371     @param retval - return code for the set l2 bits request
1372 */
1373 define l2_flags_reply {
1374     u32 context;
1375     u32 retval;
1376     u32 resulting_feature_bitmap;
1377 };
1378
1379 /** \brief Set bridge flags (such as L2_LEARN, L2_FWD, L2_FLOOD, 
1380     L2_UU_FLOOD, or L2_ARP_TERM) request
1381     @param client_index - opaque cookie to identify the sender
1382     @param context - sender context, to match reply w/ request
1383     @param bd_id - the bridge domain to set the flags for
1384     @param is_set - if non-zero, set the flags, else clear them
1385     @param feature_bitmap - bits that are non-zero to set or clear
1386 */
1387 define bridge_flags {
1388     u32 client_index;
1389     u32 context;
1390     u32 bd_id;
1391     u8 is_set;
1392     u32 feature_bitmap;
1393 };
1394
1395 /** \brief Set bridge flags response
1396     @param context - sender context, to match reply w/ request
1397     @param retval - return code for the set bridge flags request
1398     @param resulting_feature_bitmap - the feature bitmap value after the request is implemented
1399 */
1400 define bridge_flags_reply {
1401     u32 context;
1402     u32 retval;
1403     u32 resulting_feature_bitmap;
1404 };
1405
1406 /** \brief Set bridge domain ip to mac entry request
1407     @param client_index - opaque cookie to identify the sender
1408     @param context - sender context, to match reply w/ request
1409     @param bd_id - the bridge domain to set the flags for
1410     @param is_add - if non-zero, add the entry, else clear it
1411     @param is_ipv6 - if non-zero, ipv6 address, else ipv4 address
1412     @param mac_address - MAC address
1413     @param 
1414 */
1415 define bd_ip_mac_add_del {
1416     u32 client_index;
1417     u32 context;
1418     u32 bd_id;
1419     u8 is_add;
1420     u8 is_ipv6;
1421     u8 ip_address[16];
1422     u8 mac_address[6];
1423 };
1424
1425 /** \brief Set bridge domain ip to mac entry response
1426     @param context - sender context, to match reply w/ request
1427     @param retval - return code for the set bridge flags request
1428 */
1429 define bd_ip_mac_add_del_reply {
1430     u32 context;
1431     u32 retval;
1432 };
1433
1434 /** \brief Add/Delete classification table request
1435     @param client_index - opaque cookie to identify the sender
1436     @param context - sender context, to match reply w/ request
1437     @param is_add- if non-zero add the table, else delete it
1438     @param table_index - if add, reuturns index of the created table, else specifies the table to delete  
1439     @param nbuckets - number of buckets when adding a table
1440     @param memory_size - memory size when adding a table
1441     @param match_n_vectors - number of match vectors
1442     @param next_table_index - index of next table
1443     @param miss_next_index - index of miss table
1444     @param mask[] - match mask
1445 */
1446 define classify_add_del_table {
1447     u32 client_index;
1448     u32 context;
1449     u8  is_add;
1450     u32 table_index;
1451     u32 nbuckets;
1452     u32 memory_size;
1453     u32 skip_n_vectors;
1454     u32 match_n_vectors;
1455     u32 next_table_index;
1456     u32 miss_next_index;
1457     u8 mask[0];
1458 };
1459
1460 /** \brief Add/Delete classification table response
1461     @param context - sender context, to match reply w/ request
1462     @param retval - return code for the table add/del requst
1463     @param new_table_index - for add, returned index of the new table
1464     @param skip_n_vectors - for add, returned value of skip_n_vectors in table
1465     @param match_n_vectors -for add, returned value of match_n_vectors in table
1466 */
1467 define classify_add_del_table_reply {
1468     u32 context;
1469     i32 retval;
1470     u32 new_table_index;
1471     u32 skip_n_vectors;
1472     u32 match_n_vectors;
1473 };
1474
1475 /** \brief Classify add / del session request
1476     @param client_index - opaque cookie to identify the sender
1477     @param context - sender context, to match reply w/ request
1478     @param is_add - add session if non-zero, else delete
1479     @param table_index - index of the table to add/del the session, required
1480     @param hit_next_index - for add, hit_next_index of new session, required
1481     @param opaque_index - for add, opaque_index of new session
1482     @param advance -for add, advance value for session
1483     @param match[] - for add, match value for session, required
1484 */
1485 define classify_add_del_session {
1486     u32 client_index;
1487     u32 context;
1488     u8  is_add;
1489     u32 table_index;
1490     u32 hit_next_index;
1491     u32 opaque_index;
1492     i32 advance;
1493     u8 match[0];
1494 };
1495
1496 /** \brief Classify add / del session response
1497     @param context - sender context, to match reply w/ request
1498     @param retval - return code for the add/del session request
1499 */
1500 define classify_add_del_session_reply {
1501     u32 context;
1502     i32 retval;
1503 };
1504
1505 /** \brief Set/unset the classification table for an interface request 
1506     @param client_index - opaque cookie to identify the sender
1507     @param context - sender context, to match reply w/ request
1508     @param is_ipv6 - ipv6 if non-zero, else ipv4
1509     @param sw_if_index - interface to associate with the table
1510     @param table_index - index of the table, if ~0 unset the table
1511 */
1512 define classify_set_interface_ip_table {
1513     u32 client_index;
1514     u32 context;
1515     u8 is_ipv6;
1516     u32 sw_if_index;
1517     u32 table_index;            /* ~0 => off */
1518 };
1519
1520 /** \brief Set/unset interface classification table response 
1521     @param context - sender context, to match reply w/ request
1522     @param retval - return code
1523 */
1524 define classify_set_interface_ip_table_reply {
1525     u32 context;
1526     i32 retval;
1527 };
1528
1529 /** \brief Set/unset l2 classification tables for an interface request
1530     @param client_index - opaque cookie to identify the sender
1531     @param context - sender context, to match reply w/ request
1532     @param sw_if_index - interface to set/unset tables for
1533     @param ip4_table_index - ip4 index, use ~0 for all 3 indexes to unset
1534     @param ip6_table_index - ip6 index
1535     @param other_table_index - other index
1536 */
1537 define classify_set_interface_l2_tables {
1538     u32 client_index;
1539     u32 context;
1540     u32 sw_if_index;
1541     /* 3 x ~0 => off */
1542     u32 ip4_table_index;
1543     u32 ip6_table_index;
1544     u32 other_table_index;
1545 };
1546
1547 /** \brief Set/unset l2 classification tables for an interface response
1548     @param context - sender context, to match reply w/ request
1549     @param retval - return code for the request
1550 */
1551 define classify_set_interface_l2_tables_reply {
1552     u32 context;
1553     i32 retval;
1554 };
1555
1556 /** \brief Get node index using name request
1557     @param client_index - opaque cookie to identify the sender
1558     @param context - sender context, to match reply w/ request
1559     @param node_name[] - name of the node
1560 */
1561 define get_node_index {
1562     u32 client_index;
1563     u32 context;
1564     u8 node_name[64];
1565 };
1566
1567 /** \brief Get node index using name request
1568     @param context - sender context, to match reply w/ request
1569     @param retval - return code for the request
1570     @param node_index - index of the desired node if found, else ~0
1571 */
1572 define get_node_index_reply {
1573     u32 context;
1574     i32 retval;
1575     u32 node_index;
1576 };
1577
1578 /** \brief Set the next node for a given node request
1579     @param client_index - opaque cookie to identify the sender
1580     @param context - sender context, to match reply w/ request
1581     @param node_name[] - node to add the next node to
1582     @param next_name[] - node to add as the next node
1583 */
1584 define add_node_next {
1585     u32 client_index;
1586     u32 context;
1587     u8 node_name[64];
1588     u8 next_name[64];
1589 };
1590
1591 /** \brief IP Set the next node for a given node response
1592     @param context - sender context, to match reply w/ request
1593     @param retval - return code for the add next node request
1594     @param next_index - the index of the next node if success, else ~0
1595 */
1596 define add_node_next_reply {
1597     u32 context;
1598     i32 retval;
1599     u32 next_index;
1600 };
1601
1602 /** \brief DHCP Proxy config 2 add / del request
1603     @param client_index - opaque cookie to identify the sender
1604     @param context - sender context, to match reply w/ request
1605     @param rx_vrf_id - receive vrf id
1606     @param server_vrf_id - server vrf id
1607     @param if_ipv6 - ipv6 if non-zero, else ipv4
1608     @param is_add - add the config if non-zero, else delete
1609     @param insert_circuit_id - option82 suboption 1 fib number
1610     @param dhcp_server[] - server address
1611     @param dhcp_src_address[] - <fix this, need details>
1612 */
1613 define dhcp_proxy_config_2 {
1614     u32 client_index;
1615     u32 context;
1616     u32 rx_vrf_id;
1617     u32 server_vrf_id;
1618     u8 is_ipv6;
1619     u8 is_add;
1620     u8 insert_circuit_id;
1621     u8 dhcp_server[16];
1622     u8 dhcp_src_address[16];
1623 };
1624
1625 /** \brief DHCP Proxy config 2 add / del response
1626     @param context - sender context, to match reply w/ request
1627     @param retval - return code for request
1628 */
1629 define dhcp_proxy_config_2_reply {
1630     u32 context;
1631     i32 retval;
1632 };
1633
1634 /** \brief l2tpv3 tunnel interface create request
1635     @param client_index - opaque cookie to identify the sender
1636     @param context - sender context, to match reply w/ request
1637     @param client_address - remote client tunnel ip address
1638     @param client_address - local tunnel ip address
1639     @param is_ipv6 - ipv6 if non-zero, else ipv4
1640     @param local_session_id - local tunnel session id
1641     @param remote_session_id - remote tunnel session id
1642     @param local_cookie - local tunnel cookie
1643     @param l2_sublayer_present - l2 sublayer is present in packets if non-zero
1644 */
1645 define l2tpv3_create_tunnel {
1646     u32 client_index;
1647     u32 context;
1648     u8 client_address [16];
1649     u8 our_address [16];
1650     u8 is_ipv6;
1651     u32 local_session_id;
1652     u32 remote_session_id;
1653     u64 local_cookie;
1654     u64 remote_cookie;
1655     u8 l2_sublayer_present;
1656 };
1657
1658 /** \brief l2tpv3 tunnel interface create response
1659     @param context - sender context, to match reply w/ request
1660     @param retval - return code for the request
1661     @param sw_if_index - index of the new tunnel interface
1662 */
1663 define l2tpv3_create_tunnel_reply {
1664     u32 context;
1665     i32 retval;
1666     u32 sw_if_index;
1667 };
1668
1669 define l2tpv3_set_tunnel_cookies {
1670     u32 client_index;
1671     u32 context;
1672     u32 sw_if_index;
1673     u64 new_local_cookie;
1674     u64 new_remote_cookie;
1675 };
1676
1677 /** \brief L2TP tunnel set cookies response
1678     @param context - sender context, to match reply w/ request
1679     @param retval - return code for the request
1680 */
1681 define l2tpv3_set_tunnel_cookies_reply {
1682     u32 context;
1683     i32 retval;
1684 };
1685
1686 manual_java define sw_if_l2tpv3_tunnel_details {
1687     u32 context;
1688     u32 sw_if_index;
1689     u8 interface_name[64];
1690     u8 client_address [16];
1691     u8 our_address [16];
1692     u32 local_session_id;
1693     u32 remote_session_id;
1694     u64 local_cookie[2];
1695     u64 remote_cookie;
1696     u8 l2_sublayer_present;
1697 };
1698
1699 define sw_if_l2tpv3_tunnel_dump {
1700     u32 client_index;
1701     u32 context;
1702 };
1703
1704 /** \brief L2 fib clear table request, clear all mac entries in the l2 fib
1705     @param client_index - opaque cookie to identify the sender
1706     @param context - sender context, to match reply w/ request
1707 */
1708 define l2_fib_clear_table {
1709     u32 client_index;
1710     u32 context;
1711 };
1712
1713 /** \brief L2 fib clear table response
1714     @param context - sender context, to match reply w/ request
1715     @param retval - return code for the request
1716 */
1717 define l2_fib_clear_table_reply {
1718     u32 context;
1719     i32 retval;
1720 };
1721
1722 /** \brief L2 interface ethernet flow point filtering enable/disable request
1723     @param client_index - opaque cookie to identify the sender
1724     @param context - sender context, to match reply w/ request
1725     @param sw_if_index - interface to enable/disable filtering on
1726     @param enable_disable - if non-zero enable filtering, else disable
1727 */
1728 define l2_interface_efp_filter {
1729     u32 client_index;
1730     u32 context;
1731     u32 sw_if_index;
1732     u32 enable_disable;
1733 };
1734
1735 /** \brief L2 interface ethernet flow point filtering response
1736     @param context - sender context, to match reply w/ request
1737     @param retval - return code for the request
1738 */
1739 define l2_interface_efp_filter_reply {
1740     u32 context;
1741     i32 retval;
1742 };
1743
1744 define l2tpv3_interface_enable_disable {
1745     u32 client_index;
1746     u32 context;
1747     u8 enable_disable;
1748     u32 sw_if_index;
1749 }; 
1750
1751 define l2tpv3_interface_enable_disable_reply {
1752     u32 context;
1753     i32 retval;
1754 };
1755
1756 define l2tpv3_set_lookup_key {
1757     u32 client_index;
1758     u32 context;
1759     /* 0 = ip6 src_address, 1 = ip6 dst_address, 2 = session_id */
1760     u8 key;
1761 }; 
1762
1763 define l2tpv3_set_lookup_key_reply {
1764     u32 context;
1765     i32 retval;
1766 };
1767
1768 define vxlan_add_del_tunnel {
1769     u32 client_index;
1770     u32 context;
1771     u8 is_add;
1772     u32 src_address;
1773     u32 dst_address;
1774     u32 encap_vrf_id;
1775     u32 decap_next_index;
1776     u32 vni;
1777 };
1778
1779 define vxlan_add_del_tunnel_reply {
1780     u32 context;
1781     i32 retval;
1782     u32 sw_if_index;
1783 };
1784
1785 manual_java define vxlan_tunnel_dump {
1786     u32 client_index;
1787     u32 context;
1788     u32 sw_if_index;
1789 };
1790
1791 manual_java define vxlan_tunnel_details {
1792     u32 context;
1793     u32 sw_if_index;
1794     u32 src_address;
1795     u32 dst_address;
1796     u32 encap_vrf_id;
1797     u32 decap_next_index;
1798     u32 vni;
1799 };
1800   
1801 /** \brief L2 interface vlan tag rewrite configure request
1802     @param client_index - opaque cookie to identify the sender
1803     @param context - sender context, to match reply w/ request
1804     @param sw_if_index - interface the operation is applied to
1805     @param vtr_op - Choose from l2_vtr_op_t enum values
1806     @param push_dot1q - first pushed flag dot1q id set, else dot1ad
1807     @param tag1 - Needed for any push or translate vtr op
1808     @param tag2 - Needed for any push 2 or translate x-2 vtr ops
1809 */
1810 define l2_interface_vlan_tag_rewrite {
1811     u32 client_index;
1812     u32 context;
1813     u32 sw_if_index;
1814     u32 vtr_op;
1815     u32 push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad
1816     u32 tag1;  // first pushed tag
1817     u32 tag2;  // second pushed tag
1818 };
1819
1820 /** \brief L2 interface vlan tag rewrite response
1821     @param context - sender context, to match reply w/ request
1822     @param retval - return code for the request
1823 */
1824 define l2_interface_vlan_tag_rewrite_reply {
1825     u32 context;
1826     i32 retval;
1827 };
1828
1829 /** \brief vhost-user interface create request
1830     @param client_index - opaque cookie to identify the sender
1831     @param is_server - our side is socket server
1832     @param sock_filename - unix socket filename, used to speak with frontend
1833     @param use_custom_mac - enable or disable the use of the provided hardware address
1834     @param mac_address - hardware address to use if 'use_custom_mac' is set
1835 */
1836 define create_vhost_user_if {
1837    u32 client_index;
1838    u32 context;
1839    u8 is_server;
1840    u8 sock_filename[256];
1841    u8 renumber;
1842    u32 custom_dev_instance;
1843    u8 use_custom_mac;
1844    u8 mac_address[6];
1845 };
1846
1847 /** \brief vhost-user interface create response
1848     @param context - sender context, to match reply w/ request
1849     @param retval - return code for the request
1850     @param sw_if_index - interface the operation is applied to
1851 */
1852 define create_vhost_user_if_reply {
1853    u32 context;
1854    i32 retval;
1855    u32 sw_if_index;
1856 };
1857
1858 /** \brief vhost-user interface modify request
1859     @param client_index - opaque cookie to identify the sender
1860     @param is_server - our side is socket server
1861     @param sock_filename - unix socket filename, used to speak with frontend
1862 */
1863 define modify_vhost_user_if {
1864    u32 client_index;
1865    u32 context;
1866    u32 sw_if_index;
1867    u8 is_server;
1868    u8 sock_filename[256];
1869    u8 renumber;
1870    u32 custom_dev_instance;
1871 };
1872
1873 /** \brief vhost-user interface modify response
1874     @param context - sender context, to match reply w/ request
1875     @param retval - return code for the request
1876 */
1877 define modify_vhost_user_if_reply {
1878    u32 context;
1879    i32 retval;
1880 };
1881
1882 /** \brief vhost-user interface delete request
1883     @param client_index - opaque cookie to identify the sender
1884 */
1885 define delete_vhost_user_if {
1886    u32 client_index;
1887    u32 context;
1888    u32 sw_if_index;
1889 };
1890
1891 /** \brief vhost-user interface delete response
1892     @param context - sender context, to match reply w/ request
1893     @param retval - return code for the request
1894 */
1895 define delete_vhost_user_if_reply {
1896    u32 context;
1897    i32 retval;
1898 };
1899
1900 define create_subif {
1901     u32 client_index;
1902     u32 context;
1903     u32 sw_if_index;
1904     u32 sub_id;
1905
1906     /* These fields map directly onto the subif template */
1907     u8 no_tags;
1908     u8 one_tag;
1909     u8 two_tags;
1910     u8 dot1ad;   // 0 = dot1q, 1=dot1ad
1911     u8 exact_match;
1912     u8 default_sub;
1913     u8 outer_vlan_id_any;
1914     u8 inner_vlan_id_any;
1915     u16 outer_vlan_id;
1916     u16 inner_vlan_id;
1917 };
1918
1919 define create_subif_reply {
1920     u32 context;
1921     i32 retval;
1922     u32 sw_if_index;
1923 };
1924
1925 /** \brief show version
1926     @param client_index - opaque cookie to identify the sender
1927     @param context - sender context, to match reply w/ request
1928 */
1929 define show_version {
1930    u32 client_index;
1931    u32 context;
1932 };
1933
1934 /** \brief show version response
1935     @param context - sender context, to match reply w/ request
1936     @param retval - return code for the request
1937     @param program - name of the program (vpe)
1938     @param version  - version of the program
1939     @param build_directory - root of the workspace where the program was built
1940 */
1941 manual_java define show_version_reply {
1942    u32 context;
1943    i32 retval;
1944    u8 program[32];
1945    u8 version[32];
1946    u8 build_date[32];
1947    u8 build_directory[256];
1948 };
1949
1950 define nsh_gre_add_del_tunnel {
1951     u32 client_index;
1952     u32 context;
1953     u32 src;
1954     u32 dst;
1955     u32 encap_vrf_id;
1956     u32 decap_vrf_id;
1957     u32 decap_next_index;
1958     u8 tlv_len_in_words;
1959     u8 is_add;
1960     u8 ver_o_c;
1961     u8 length;
1962     u8 md_type;
1963     u8 next_protocol;
1964     /* in network byte order */
1965     u32 spi_si;
1966     u32 c1;
1967     u32 c2;
1968     u32 c3;
1969     u32 c4;
1970     u32 tlvs[0];
1971 };
1972
1973 define nsh_gre_add_del_tunnel_reply {
1974     u32 context;
1975     i32 retval;
1976     u32 sw_if_index;
1977 };
1978
1979 /** \brief Vhost-user interface details structure (fix this)
1980     @param sw_if_index - index of the interface
1981     @param interface_name - name of interface
1982     @param virtio_net_hdr_sz - net header size
1983     @param features - interface features
1984     @param is_server - vhost-user server socket
1985     @param sock_filename - socket filename
1986     @param num_regions - number of used memory regions
1987 */
1988 manual_java define sw_interface_vhost_user_details {
1989     u32 context;
1990     u32 sw_if_index;
1991     u8 interface_name[64];
1992     u32 virtio_net_hdr_sz;
1993     u64 features;
1994     u8 is_server;
1995     u8 sock_filename[256];
1996     u32 num_regions;
1997     i32 sock_errno;
1998 };
1999
2000 /* works */
2001 define sw_interface_vhost_user_dump {
2002     u32 client_index;
2003     u32 context;
2004 };
2005
2006 manual_java define ip_address_details {
2007     u32 client_index;
2008     u32 context;
2009     u8 ip[16];
2010     u8 prefix_length;
2011 };
2012
2013 manual_java define ip_address_dump {
2014     u32 client_index;
2015     u32 context;
2016     u32 sw_if_index;
2017     u8 is_ipv6;
2018 };
2019
2020 manual_java define ip_details {
2021     u32 sw_if_index;
2022     u32 context;
2023 };
2024
2025 define ip_dump {
2026     u32 client_index;
2027     u32 context;
2028     u8 is_ipv6;
2029 };
2030
2031 /** \brief l2 fib table entry structure
2032     @param bd_id - the l2 fib / bridge domain table id
2033     @param mac - the entry's mac address
2034     @param sw_if_index - index of the interface
2035     @param static_mac - the entry is statically configured.
2036     @param filter_mac - the entry is a mac filter entry.
2037     @param bvi_mac - the mac address is a bridge virtual interface
2038 */
2039 manual_java define l2_fib_table_entry {
2040     u32 context;
2041     u32 bd_id;
2042     u64 mac;
2043     u32 sw_if_index;
2044     u8 static_mac;
2045     u8 filter_mac;
2046     u8 bvi_mac;
2047 };
2048
2049 /** \brief Dump l2 fib (aka bridge domain) table
2050     @param client_index - opaque cookie to identify the sender
2051     @param bd_id - the l2 fib / bridge domain table identifier
2052 */
2053 manual_java define l2_fib_table_dump {
2054     u32 client_index;
2055     u32 context;
2056     u32 bd_id;
2057 };
2058
2059 define nsh_vxlan_gpe_add_del_tunnel {
2060     u32 client_index;
2061     u32 context;
2062     u32 src;
2063     u32 dst;
2064     u32 encap_vrf_id;
2065     u32 decap_vrf_id;
2066     u32 decap_next_index;
2067     u32 vni;
2068     u8 tlv_len_in_words;
2069     u8 is_add;
2070     u8 ver_o_c;
2071     u8 length;
2072     u8 md_type;
2073     u8 next_protocol;
2074     /* in network byte order */
2075     u32 spi_si;
2076     u32 c1;
2077     u32 c2;
2078     u32 c3;
2079     u32 c4;
2080     u32 tlvs[0];
2081 };
2082
2083 define nsh_vxlan_gpe_add_del_tunnel_reply {
2084     u32 context;
2085     i32 retval;
2086     u32 sw_if_index;
2087 };
2088
2089 define lisp_gpe_add_del_tunnel {
2090     u32 client_index;
2091     u32 context;
2092     u32 src;
2093     u32 dst;
2094     u32 encap_vrf_id;
2095     u32 decap_vrf_id;
2096     u32 decap_next_index;
2097     u8 is_add;
2098     u8 flags;
2099     u8 ver_res;
2100     u8 res;
2101     u8 next_protocol;
2102     /* in network byte order */
2103     u32 iid;
2104 };
2105
2106 define lisp_gpe_add_del_tunnel_reply {
2107     u32 context;
2108     i32 retval;
2109     u32 sw_if_index;
2110 };
2111
2112 /** \brief add or delete locator_set
2113     @param client_index - opaque cookie to identify the sender
2114     @param context - sender context, to match reply w/ request
2115     @param is_add - add address if non-zero, else delete
2116     @param locator_set_name - locator name
2117 */
2118 define lisp_add_del_locator_set {
2119     u32 client_index;
2120     u32 context;
2121     u8  is_add;
2122     u8  locator_set_name[64];
2123 };
2124
2125 /** \brief Reply for locator_set add/del
2126     @param context - returned sender context, to match reply w/ request
2127     @param retval - return code
2128 */
2129 define lisp_add_del_locator_set_reply {
2130     u32 context;
2131     i32 retval;
2132 };
2133
2134 /** \brief add or delete locator for locator_set
2135     @param client_index - opaque cookie to identify the sender
2136     @param context - sender context, to match reply w/ request
2137     @param is_add - add address if non-zero, else delete
2138     @param locator_set_name - name of locator_set to add/del locator
2139     @param sw_if_index - index of the interface
2140     @param priority - priority of the lisp locator
2141     @param weight - weight of the lisp locator
2142 */
2143 define lisp_add_del_locator {
2144     u32 client_index;
2145     u32 context;
2146     u8  is_add;
2147     u8  locator_set_name[64];
2148     u32 sw_if_index;
2149     u8  priority;
2150     u8  weight;
2151 };
2152
2153 /** \brief Reply for locator add/del
2154     @param context - returned sender context, to match reply w/ request
2155     @param retval - return code
2156 */
2157 define lisp_add_del_locator_reply {
2158     u32 context;
2159     i32 retval;
2160 };
2161
2162 /** \brief add or delete lisp eid-table
2163     @param client_index - opaque cookie to identify the sender
2164     @param context - sender context, to match reply w/ request
2165     @param is_add - add address if non-zero, else delete
2166     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
2167     @param ip_address - array of address bytes
2168     @param prefix_len - prefix len
2169     @param locator_set_name - name of locator_set to add/del eid-table
2170 */
2171 define lisp_add_del_local_eid {
2172     u32 client_index;
2173     u32 context;
2174     u8  is_add;
2175     u8  is_ipv6;
2176     u8  ip_address[16];
2177     u8  prefix_len;
2178     u8  locator_set_name[64];
2179 };
2180
2181 /** \brief Reply for local_eid add/del
2182     @param context - returned sender context, to match reply w/ request
2183     @param retval - return code
2184 */
2185 define lisp_add_del_local_eid_reply {
2186     u32 context;
2187     i32 retval;
2188 };
2189
2190 /** \brief add or delete lisp gpe maptunel
2191     @param client_index - opaque cookie to identify the sender
2192     @param context - sender context, to match reply w/ request
2193     @param is_add - add address if non-zero, else delete
2194     @param eid_is_ipv6 - if non-zero the address is ipv6, else ipv4
2195     @param eid_ip_address - array of address bytes
2196     @param eid_prefix_len - prefix len
2197     @param address_is_ipv6 - if non-zero the address is ipv6, else ipv4
2198     @param source_ip_address - array of address bytes
2199     @param destination_ip_address - array of address bytes
2200 */
2201 define lisp_gpe_add_del_fwd_entry {
2202     u32 client_index;
2203     u32 context;
2204     u8  is_add;
2205     u8  eid_is_ipv6;
2206     u8  eid_ip_address[16];
2207     u8  eid_prefix_len;
2208     u8  address_is_ipv6;
2209     u8  source_ip_address[16];
2210     u8  destination_ip_address[16];
2211 };
2212
2213 /** \brief Reply for gpe_fwd_entry add/del
2214     @param context - returned sender context, to match reply w/ request
2215     @param retval - return code
2216 */
2217 define lisp_gpe_add_del_fwd_entry_reply {
2218     u32 context;
2219     i32 retval;
2220 };
2221
2222 /** \brief add or delete map-resolver
2223     @param client_index - opaque cookie to identify the sender
2224     @param context - sender context, to match reply w/ request
2225     @param is_add - add address if non-zero, else delete
2226     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
2227     @param ip_address - array of address bytes
2228 */
2229 define lisp_add_del_map_resolver {
2230     u32 client_index;
2231     u32 context;
2232     u8  is_add;
2233     u8  is_ipv6;
2234     u8  ip_address[16];
2235 };
2236
2237 /** \brief Reply for map_resolver add/del
2238     @param context - returned sender context, to match reply w/ request
2239     @param retval - return code
2240 */
2241 define lisp_add_del_map_resolver_reply {
2242     u32 context;
2243     i32 retval;
2244 };
2245
2246 /** \brief enable or disable lisp-gpe protocol
2247     @param client_index - opaque cookie to identify the sender
2248     @param context - sender context, to match reply w/ request
2249     @param is_en - enable protocol if non-zero, else disable
2250 */
2251 define lisp_gpe_enable_disable {
2252     u32 client_index;
2253     u32 context;
2254     u8  is_en;
2255 };
2256
2257 /** \brief Reply for gpe enable/disable
2258     @param context - returned sender context, to match reply w/ request
2259     @param retval - return code
2260 */
2261 define lisp_gpe_enable_disable_reply {
2262     u32 context;
2263     i32 retval;
2264 };
2265
2266 /** \brief add or delete gpe_iface
2267     @param client_index - opaque cookie to identify the sender
2268     @param context - sender context, to match reply w/ request
2269     @param is_add - add address if non-zero, else delete
2270 */
2271 define lisp_gpe_add_del_iface {
2272     u32 client_index;
2273     u32 context;
2274     u8  is_add;
2275     u32 table_id;
2276     u32 vni;
2277 };
2278
2279 /** \brief Reply for gpe_iface add/del
2280     @param context - returned sender context, to match reply w/ request
2281     @param retval - return code
2282 */
2283 define lisp_gpe_add_del_iface_reply {
2284     u32 context;
2285     i32 retval;
2286 };
2287
2288 /** \brief LISP locator_set status
2289     @param locator_set_name - name of the locator_set
2290     @param sw_if_index - sw_if_index of the locator
2291     @param priority - locator priority
2292     @param weight - locator weight
2293  */
2294 manual_java define lisp_locator_set_details {
2295     u32 context;
2296     u8  locator_set_name[64];
2297     u32 sw_if_index;
2298     u8  priority;
2299     u8  weight;
2300 };
2301
2302 /** \brief Request for locator_set summary status
2303     @param client_index - opaque cookie to identify the sender
2304     @param context - sender context, to match reply w/ request
2305  */
2306 define lisp_locator_set_dump {
2307     u32 client_index;
2308     u32 context;
2309 };
2310
2311 /** \brief LISP local eid table status
2312     @param locator_set_name - name of the locator_set
2313     @param eid_is_ipv6 - if non-zero the address is ipv6, else ipv4
2314     @param eid_ip_address - array of address bytes
2315     @param eid_prefix_len - prefix len
2316  */
2317 manual_java define lisp_local_eid_table_details {
2318     u32 context;
2319     u8  locator_set_name[64];
2320     u8  eid_is_ipv6;
2321     u8  eid_ip_address[16];
2322     u8  eid_prefix_len;
2323 };
2324
2325 /** \brief Request for local eid table summary status
2326     @param client_index - opaque cookie to identify the sender
2327     @param context - sender context, to match reply w/ request
2328  */
2329 define lisp_local_eid_table_dump {
2330     u32 client_index;
2331     u32 context;
2332 };
2333
2334 manual_java define lisp_gpe_tunnel_details {
2335     u32 context;
2336     u32 tunnels;
2337     u8  is_ipv6;
2338     u8  source_ip[16];
2339     u8  destination_ip[16];
2340     u32 encap_fib_id;
2341     u32 decap_fib_id;
2342     u32 dcap_next;
2343     u8  lisp_ver;
2344     u8  next_protocol;
2345     u8  flags;
2346     u8  ver_res;
2347     u8  res;
2348     u32 iid;
2349 };
2350
2351 /** \brief Request for gpe tunnel summary status
2352     @param client_index - opaque cookie to identify the sender
2353     @param context - sender context, to match reply w/ request
2354  */
2355 define lisp_gpe_tunnel_dump {
2356     u32 client_index;
2357     u32 context;
2358 };
2359
2360 /** \brief LISP map resolver status
2361     @param locator_set_name - name of the locator_set
2362     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
2363     @param ip_address - array of address bytes
2364  */
2365 manual_java define lisp_map_resolver_details {
2366     u32 context;
2367     u8  is_ipv6;
2368     u8  ip_address[16];
2369 };
2370
2371 /** \brief Request for map resolver summary status
2372     @param client_index - opaque cookie to identify the sender
2373     @param context - sender context, to match reply w/ request
2374  */
2375 define lisp_map_resolver_dump {
2376     u32 client_index;
2377     u32 context;
2378 };
2379
2380 /* Gross kludge, DGMS */
2381 define interface_name_renumber {
2382     u32 client_index;
2383     u32 context;
2384     u32 sw_if_index;
2385     u32 new_show_dev_instance;
2386 };
2387
2388 define interface_name_renumber_reply {
2389     u32 context;
2390     i32 retval;
2391 };
2392
2393 /** \brief Register for ip4 arp resolution events
2394     @param client_index - opaque cookie to identify the sender
2395     @param context - sender context, to match reply w/ request
2396     @param enable_disable - 1 => register for events, 0 => cancel registration
2397     @param pid - sender's pid
2398     @param address - the exact ip4 address of interest
2399 */
2400 define want_ip4_arp_events {
2401     u32 client_index;
2402     u32 context;
2403     u8 enable_disable;
2404     u32 pid;
2405     u32 address;
2406 };
2407
2408 /** \brief Reply for interface events registration
2409     @param context - returned sender context, to match reply w/ request
2410     @param retval - return code
2411 */
2412 define want_ip4_arp_events_reply {
2413     u32 context;
2414     i32 retval;
2415 };
2416
2417 /** \brief Tell client about an ip4 arp resolution event
2418     @param client_index - opaque cookie to identify the sender
2419     @param context - sender context, to match reply w/ request
2420     @param address - the exact ip4 address of interest
2421     @param pid - client pid registered to receive notification
2422     @param sw_if_index - interface which received ARP packet
2423     @param new_mac - the new mac address 
2424 */
2425 define ip4_arp_event {
2426     u32 client_index;
2427     u32 context;
2428     u32 address;
2429     u32 pid;
2430     u32 sw_if_index;
2431     u8 new_mac[6];
2432 };
2433     
2434 /** \brief L2 bridge domain add or delete request
2435     @param client_index - opaque cookie to identify the sender
2436     @param context - sender context, to match reply w/ request
2437     @param bd_id - the bridge domain to create
2438     @param flood - enable/disable bcast/mcast flooding in the bd
2439     @param uu_flood - enable/disable uknown unicast flood in the bd
2440     @param forward - enable/disable forwarding on all interfaces in the bd
2441     @param learn - enable/disable learning on all interfaces in the bd
2442     @param arp_term - enable/disable arp termination in the bd
2443     @param is_add - add or delete flag
2444 */
2445 define bridge_domain_add_del {
2446     u32 client_index;
2447     u32 context;
2448     u32 bd_id;
2449     u8 flood;
2450     u8 uu_flood;
2451     u8 forward;
2452     u8 learn;
2453     u8 arp_term;
2454     u8 is_add;
2455 };
2456
2457 /** \brief L2 bridge domain add or delete response
2458     @param context - sender context, to match reply w/ request
2459     @param retval - return code for the set bridge flags request
2460 */
2461 define bridge_domain_add_del_reply {
2462     u32 context;
2463     u32 retval;
2464 };
2465
2466 /** \brief L2 bridge domain request operational state details
2467     @param client_index - opaque cookie to identify the sender
2468     @param context - sender context, to match reply w/ request
2469     @param bd_id - the bridge domain id desired or ~0 to request all bds
2470 */
2471 manual_java define bridge_domain_dump {
2472     u32 client_index;
2473     u32 context;
2474     u32 bd_id;
2475 };
2476
2477 /** \brief L2 bridge domain operational state response
2478     @param bd_id - the bridge domain id
2479     @param flood - bcast/mcast flooding state on all interfaces in the bd
2480     @param uu_flood - uknown unicast flooding state on all interfaces in the bd
2481     @param forward - forwarding state on all interfaces in the bd
2482     @param learn - learning state on all interfaces in the bd
2483     @param arp_term - arp termination state on all interfaces in the bd
2484     @param n_sw_ifs - number of sw_if_index's in the domain
2485 */
2486 manual_java define bridge_domain_details {
2487     u32 context;
2488     u32 bd_id;
2489     u8 flood;
2490     u8 uu_flood;
2491     u8 forward;
2492     u8 learn;
2493     u8 arp_term;
2494     u32 bvi_sw_if_index;
2495     u32 n_sw_ifs;
2496 };
2497
2498 /** \brief L2 bridge domain sw interface operational state response
2499     @param bd_id - the bridge domain id
2500     @param sw_if_index - sw_if_index in the domain
2501     @param shg - split horizon group for the interface
2502 */
2503 manual_java define bridge_domain_sw_if_details {
2504     u32 context;
2505     u32 bd_id;
2506     u32 sw_if_index;
2507     u8 shg;
2508 };
2509
2510 /** \brief DHCP Client config add / del request
2511     @param client_index - opaque cookie to identify the sender
2512     @param context - sender context, to match reply w/ request
2513     @param sw_if_index - index of the interface for DHCP client
2514     @param hostname - hostname
2515     @param is_add - add the config if non-zero, else delete
2516     @param want_dhcp_event - DHCP event sent to the sender
2517            via dhcp_compl_event API message if non-zero
2518     @param pid - sender's pid
2519 */
2520 define dhcp_client_config {
2521     u32 client_index;
2522     u32 context;
2523     u32 sw_if_index;
2524     u8 hostname[64];
2525     u8 is_add;
2526     u8 want_dhcp_event;
2527     u32 pid;
2528 };
2529
2530 /** \brief DHCP Client config response
2531     @param context - sender context, to match reply w/ request
2532     @param retval - return code for the request
2533 */
2534 define dhcp_client_config_reply {
2535     u32 context;
2536     i32 retval;
2537 };
2538
2539 /** \brief Set/unset input ACL interface
2540     @param client_index - opaque cookie to identify the sender
2541     @param context - sender context, to match reply w/ request
2542     @param sw_if_index - interface to set/unset input ACL
2543     @param ip4_table_index - ip4 classify table index (~0 for skip)
2544     @param ip6_table_index - ip6 classify table index (~0 for skip)
2545     @param l2_table_index  -  l2 classify table index (~0 for skip)
2546     @param is_add - Set input ACL if non-zero, else unset
2547     Note: User is recommeneded to use just one valid table_index per call.
2548           (ip4_table_index, ip6_table_index, or l2_table_index)
2549 */
2550 define input_acl_set_interface {
2551     u32 client_index;
2552     u32 context;
2553     u32 sw_if_index;
2554     u32 ip4_table_index;
2555     u32 ip6_table_index;
2556     u32 l2_table_index;
2557     u8  is_add;
2558 };
2559
2560 /** \brief Set/unset input ACL interface response
2561     @param context - sender context, to match reply w/ request
2562     @param retval - return code for the request
2563 */
2564 define input_acl_set_interface_reply {
2565     u32 context;
2566     i32 retval;
2567 };
2568
2569 /** \brief IPsec: Add/delete Security Policy Database
2570     @param client_index - opaque cookie to identify the sender
2571     @param context - sender context, to match reply w/ request
2572     @param is_add - add SPD if non-zero, else delete
2573     @param spd_id - SPD instance id (control plane allocated)
2574 */
2575
2576 define ipsec_spd_add_del {
2577     u32 client_index;
2578     u32 context;
2579     u8 is_add;
2580     u32 spd_id;
2581 };
2582
2583 /** \brief Reply for IPsec: Add/delete Security Policy Database entry
2584     @param context - returned sender context, to match reply w/ request
2585     @param retval - return code
2586 */
2587
2588 define ipsec_spd_add_del_reply {
2589     u32 context;
2590     i32 retval;
2591 };
2592
2593 /** \brief IPsec: Add/delete SPD from interface
2594
2595     @param client_index - opaque cookie to identify the sender
2596     @param context - sender context, to match reply w/ request
2597     @param is_add - add security mode if non-zero, else delete
2598     @param sw_if_index - index of the interface
2599     @param spd_id - SPD instance id to use for lookups
2600 */
2601
2602
2603 define ipsec_interface_add_del_spd {
2604     u32 client_index;
2605     u32 context;
2606
2607     u8 is_add;
2608     u32 sw_if_index;
2609     u32 spd_id;
2610 };
2611
2612 /** \brief Reply for IPsec: Add/delete SPD from interface
2613     @param context - returned sender context, to match reply w/ request
2614     @param retval - return code
2615 */
2616
2617 define ipsec_interface_add_del_spd_reply {
2618     u32 context;
2619     i32 retval;
2620 };
2621
2622 /** \brief IPsec: Add/delete Security Policy Database entry
2623
2624     See RFC 4301, 4.4.1.1 on how to match packet to selectors
2625
2626     @param client_index - opaque cookie to identify the sender
2627     @param context - sender context, to match reply w/ request
2628     @param is_add - add SPD if non-zero, else delete
2629     @param spd_id - SPD instance id (control plane allocated)
2630     @param priority - priority of SPD entry (non-unique value).  Used to order SPD matching - higher priorities match before lower
2631     @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic
2632     @param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4
2633     @param remote_address_start - start of remote address range to match
2634     @param remote_address_stop - end of remote address range to match
2635     @param local_address_start - start of local address range to match
2636     @param local_address_stop - end of local address range to match
2637     @param protocol - protocol type to match [0 means any]
2638     @param remote_port_start - start of remote port range to match ...
2639     @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
2640     @param local_port_start - start of local port range to match ...
2641     @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
2642     @param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters)
2643     @param sa_id - SAD instance id (control plane allocated)
2644
2645 */
2646
2647 define ipsec_spd_add_del_entry {
2648     u32 client_index;
2649     u32 context;
2650     u8 is_add;
2651
2652     u32 spd_id;
2653     i32 priority;
2654     u8 is_outbound;
2655
2656     // Selector
2657     u8 is_ipv6;
2658     u8 is_ip_any;
2659     u8 remote_address_start[16];
2660     u8 remote_address_stop[16];
2661     u8 local_address_start[16];
2662     u8 local_address_stop[16];
2663
2664     u8 protocol;
2665
2666     u16 remote_port_start;
2667     u16 remote_port_stop;
2668     u16 local_port_start;
2669     u16 local_port_stop;
2670
2671     // Policy
2672     u8 policy;
2673     u32 sa_id;
2674 };
2675
2676 /** \brief Reply for IPsec: Add/delete Security Policy Database entry
2677     @param context - returned sender context, to match reply w/ request
2678     @param retval - return code
2679 */
2680
2681 define ipsec_spd_add_del_entry_reply {
2682     u32 context;
2683     i32 retval;
2684 };
2685
2686 /** \brief IPsec: Add/delete Security Association Database entry
2687     @param client_index - opaque cookie to identify the sender
2688     @param context - sender context, to match reply w/ request
2689     @param is_add - add SAD entry if non-zero, else delete
2690
2691     @param sad_id - sad id
2692
2693     @param spi - security parameter index
2694
2695     @param protocol - 0 = AH, 1 = ESP
2696
2697     @param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC
2698     @param crypto_key_length - length of crypto_key in bytes
2699     @param crypto_key - crypto keying material
2700
2701     @param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512
2702     @param integrity_key_length - length of integrity_key in bytes
2703     @param integrity_key - integrity keying material
2704
2705     @param use_extended_sequence_number - use ESN when non-zero
2706
2707     @param is_tunnel - IPsec tunnel mode if non-zero, else transport mode
2708     @param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero
2709     @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
2710     @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
2711
2712     To be added:
2713      Anti-replay
2714      IPsec tunnel address copy mode (to support GDOI)
2715  */
2716
2717 define ipsec_sad_add_del_entry {
2718     u32 client_index;
2719     u32 context;
2720     u8 is_add;
2721
2722     u32 sad_id;
2723
2724     u32 spi;
2725
2726     u8 protocol;
2727
2728     u8 crypto_algorithm;
2729     u8 crypto_key_length;
2730     u8 crypto_key[128];
2731
2732     u8 integrity_algorithm;
2733     u8 integrity_key_length;
2734     u8 integrity_key[128];
2735
2736     u8 use_extended_sequence_number;
2737
2738     u8 is_tunnel;
2739     u8 is_tunnel_ipv6;
2740     u8 tunnel_src_address[16];
2741     u8 tunnel_dst_address[16];
2742 };
2743
2744 /** \brief Reply for IPsec: Add/delete Security Association Database entry
2745     @param context - returned sender context, to match reply w/ request
2746     @param retval - return code
2747 */
2748
2749 define ipsec_sad_add_del_entry_reply {
2750     u32 context;
2751     i32 retval;
2752 };
2753
2754 /** \brief IPsec: Update Security Association keys
2755     @param client_index - opaque cookie to identify the sender
2756     @param context - sender context, to match reply w/ request
2757
2758     @param sa_id - sa id
2759
2760     @param crypto_key_length - length of crypto_key in bytes
2761     @param crypto_key - crypto keying material
2762
2763     @param integrity_key_length - length of integrity_key in bytes
2764     @param integrity_key - integrity keying material
2765 */
2766
2767 define ipsec_sa_set_key {
2768     u32 client_index;
2769     u32 context;
2770
2771     u32 sa_id;
2772
2773     u8 crypto_key_length;
2774     u8 crypto_key[128];
2775
2776     u8 integrity_key_length;
2777     u8 integrity_key[128];
2778 };
2779
2780 /** \brief Reply for IPsec: Update Security Association keys
2781     @param context - returned sender context, to match reply w/ request
2782     @param retval - return code
2783 */
2784
2785 define ipsec_sa_set_key_reply {
2786     u32 context;
2787     i32 retval;
2788 };
2789
2790 /** \brief IKEv2: Add/delete profile
2791     @param client_index - opaque cookie to identify the sender
2792     @param context - sender context, to match reply w/ request
2793
2794     @param name - IKEv2 profile name
2795     @param is_add - Add IKEv2 profile if non-zero, else delete
2796 */
2797 define ikev2_profile_add_del {
2798     u32 client_index;
2799     u32 context;
2800
2801     u8 name[64];
2802     u8 is_add;
2803 };
2804
2805 /** \brief Reply for IKEv2: Add/delete profile
2806     @param context - returned sender context, to match reply w/ request
2807     @param retval - return code
2808 */
2809 define ikev2_profile_add_del_reply {
2810     u32 context;
2811     i32 retval;
2812 };
2813
2814 /** \brief IKEv2: Set IKEv2 profile authentication method
2815     @param client_index - opaque cookie to identify the sender
2816     @param context - sender context, to match reply w/ request
2817
2818     @param name - IKEv2 profile name
2819     @param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig)
2820     @param is_hex - Authentication data in hex format if non-zero, else string
2821     @param data_len - Authentication data length
2822     @param data - Authentication data (for rsa-sig cert file path)
2823 */
2824 define ikev2_profile_set_auth {
2825     u32 client_index;
2826     u32 context;
2827
2828     u8 name[64];
2829     u8 auth_method;
2830     u8 is_hex;
2831     u32 data_len;
2832     u8 data[0];
2833 };
2834
2835 /** \brief Reply for IKEv2: Set IKEv2 profile authentication method
2836     @param context - returned sender context, to match reply w/ request
2837     @param retval - return code
2838 */
2839 define ikev2_profile_set_auth_reply {
2840     u32 context;
2841     i32 retval;
2842 };
2843
2844 /** \brief IKEv2: Set IKEv2 profile local/remote identification
2845     @param client_index - opaque cookie to identify the sender
2846     @param context - sender context, to match reply w/ request
2847
2848     @param name - IKEv2 profile name
2849     @param is_local - Identification is local if non-zero, else remote
2850     @param id_type - Identification type
2851     @param data_len - Identification data length
2852     @param data - Identification data
2853 */
2854 define ikev2_profile_set_id {
2855     u32 client_index;
2856     u32 context;
2857
2858     u8 name[64];
2859     u8 is_local;
2860     u8 id_type;
2861     u32 data_len;
2862     u8 data[0];
2863 };
2864
2865 /** \brief Reply for IKEv2:
2866     @param context - returned sender context, to match reply w/ request
2867     @param retval - return code
2868 */
2869 define ikev2_profile_set_id_reply {
2870     u32 context;
2871     i32 retval;
2872 };
2873
2874 /** \brief IKEv2: Set IKEv2 profile traffic selector parameters
2875     @param client_index - opaque cookie to identify the sender
2876     @param context - sender context, to match reply w/ request
2877
2878     @param name - IKEv2 profile name
2879     @param is_local - Traffic selector is local if non-zero, else remote
2880     @param proto - Traffic selector IP protocol (if zero not relevant)
2881     @param start_port - The smallest port number allowed by traffic selector
2882     @param end_port - The largest port number allowed by traffic selector
2883     @param start_addr - The smallest address included in traffic selector
2884     @param end_addr - The largest address included in traffic selector
2885 */
2886 define ikev2_profile_set_ts {
2887     u32 client_index;
2888     u32 context;
2889
2890     u8 name[64];
2891     u8 is_local;
2892     u8 proto;
2893     u16 start_port;
2894     u16 end_port;
2895     u32 start_addr;
2896     u32 end_addr;
2897 };
2898
2899 /** \brief Reply for IKEv2: Set IKEv2 profile traffic selector parameters
2900     @param context - returned sender context, to match reply w/ request
2901     @param retval - return code
2902 */
2903 define ikev2_profile_set_ts_reply {
2904     u32 context;
2905     i32 retval;
2906 };
2907
2908 /** \brief IKEv2: Set IKEv2 local RSA private key
2909     @param client_index - opaque cookie to identify the sender
2910     @param context - sender context, to match reply w/ request
2911
2912     @param key_file - Key file absolute path
2913 */
2914 define ikev2_set_local_key {
2915     u32 client_index;
2916     u32 context;
2917
2918     u8 key_file[256];
2919 };
2920
2921 /** \brief Reply for IKEv2: Set IKEv2 local key
2922     @param context - returned sender context, to match reply w/ request
2923     @param retval - return code
2924 */
2925 define ikev2_set_local_key_reply {
2926     u32 context;
2927     i32 retval;
2928 };
2929
2930 /** \brief Tell client about a DHCP completion event
2931     @param client_index - opaque cookie to identify the sender
2932     @param pid - client pid registered to receive notification
2933     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
2934     @param host_address - Host IP address
2935     @param router_address - Router IP address
2936     @param host_mac - Host MAC address
2937 */
2938 manual_java define dhcp_compl_event {
2939     u32 client_index;
2940     u32 pid;
2941     u8 hostname[64];
2942     u8 is_ipv6;
2943     u8 host_address[16];
2944     u8 router_address[16];
2945     u8 host_mac[6];
2946 };
2947
2948 /** \brief Add MAP domains
2949     @param client_index - opaque cookie to identify the sender
2950     @param context - sender context, to match reply w/ request
2951     @param ip6_prefix - Rule IPv6 prefix
2952     @param ip4_prefix - Rule IPv4 prefix
2953     @param ip6_src - MAP domain IPv6 BR address / Tunnel source
2954     @param ip6_prefix_len - Rule IPv6 prefix length
2955     @param ip4_prefix_len - Rule IPv4 prefix length
2956     @param ea_bits_len - Embedded Address bits length
2957     @param psid_offset - Port Set Identifider (PSID) offset
2958     @param psid_length - PSID length
2959     @param is_translation - MAP-E / MAP-T
2960     @param mtu - MTU
2961 */
2962 define map_add_domain {
2963   u32 client_index;
2964   u32 context;
2965   u8 ip6_prefix[16];
2966   u8 ip4_prefix[4];
2967   u8 ip6_src[16];
2968   u8 ip6_prefix_len;
2969   u8 ip4_prefix_len;
2970   u8 ip6_src_prefix_len;
2971   u8 ea_bits_len;
2972   u8 psid_offset;
2973   u8 psid_length;
2974   u8 is_translation;
2975   u16 mtu;
2976 };
2977
2978 /** \brief Reply for MAP domain add
2979     @param context - returned sender context, to match reply w/ request
2980     @param index - MAP domain index
2981     @param retval - return code
2982 */
2983 define map_add_domain_reply {
2984   u32 context;
2985   u32 index;
2986   i32 retval;
2987 };
2988
2989 /** \brief Delete MAP domain
2990     @param client_index - opaque cookie to identify the sender
2991     @param context - sender context, to match reply w/ request
2992     @param index - MAP Domain index
2993 */
2994 define map_del_domain {
2995   u32 client_index;
2996   u32 context;
2997   u32 index;
2998 };
2999
3000 /** \brief Reply for MAP domain del
3001     @param context - returned sender context, to match reply w/ request
3002     @param retval - return code
3003 */
3004 define map_del_domain_reply {
3005   u32 context;
3006   i32 retval;
3007 };
3008
3009 /** \brief Add or Delete MAP rule from a domain (Only used for shared IPv4 per subscriber)
3010     @param client_index - opaque cookie to identify the sender
3011     @param context - sender context, to match reply w/ request
3012     @param index - MAP Domain index
3013     @param is_add - If 1 add rule, if 0 delete rule
3014     @param ip6_dst - MAP CE IPv6 address
3015     @param psid - Rule PSID
3016 */
3017 define map_add_del_rule {
3018   u32 client_index;
3019   u32 context;
3020   u32 index;
3021   u32 is_add;
3022   u8 ip6_dst[16];
3023   u16 psid;
3024 };
3025
3026 /** \brief Reply for MAP rule add/del
3027     @param context - returned sender context, to match reply w/ request
3028     @param retval - return code
3029 */
3030 define map_add_del_rule_reply {
3031   u32 context;
3032   i32 retval;
3033 };
3034
3035 /** \brief Get list of map domains
3036     @param client_index - opaque cookie to identify the sender
3037 */
3038 define map_domain_dump {
3039   u32 client_index;
3040   u32 context;
3041 };
3042
3043 manual_java define map_domain_details {
3044   u32 context;
3045   u32 domain_index;
3046   u8 ip6_prefix[16];
3047   u8 ip4_prefix[4];
3048   u8 ip6_src[16];
3049   u8 ip6_prefix_len;
3050   u8 ip4_prefix_len;
3051   u8 ip6_src_len;
3052   u8 ea_bits_len;
3053   u8 psid_offset;
3054   u8 psid_length;
3055   u8 flags;
3056   u16 mtu;
3057   u8 is_translation;
3058 };
3059
3060 define map_rule_dump {
3061   u32 client_index;
3062   u32 context;
3063   u32 domain_index;
3064 };
3065
3066 manual_java define map_rule_details {
3067   u32 context;
3068   u8 ip6_dst[16];
3069   u16 psid;
3070 };
3071
3072 /** \brief Request for a single block of summary stats
3073     @param client_index - opaque cookie to identify the sender
3074     @param context - sender context, to match reply w/ request
3075 */
3076 define map_summary_stats {
3077     u32 client_index;
3078     u32 context;
3079 };
3080
3081 /** \brief Reply for map_summary_stats request
3082     @param context - sender context, to match reply w/ request
3083     @param retval - return code for request
3084     @param total_bindings -  
3085     @param total_pkts -  
3086     @param total_ip4_fragments -
3087     @param total_security_check - 
3088 */
3089 define map_summary_stats_reply {
3090     u32 context;
3091     i32 retval;
3092     u64 total_bindings;
3093     u64 total_pkts[2];
3094     u64 total_bytes[2];
3095     u64 total_ip4_fragments;
3096     u64 total_security_check[2];
3097 };
3098
3099 /** \brief cop: enable/disable junk filtration features on an interface
3100     @param client_index - opaque cookie to identify the sender
3101     @param context - sender context, to match reply w/ request
3102     @param sw_if_inded - desired interface
3103     @param enable_disable - 1 => enable, 0 => disable
3104 */
3105
3106 define cop_interface_enable_disable {
3107     u32 client_index;
3108     u32 context;
3109     u32 sw_if_index;
3110     u8 enable_disable;
3111 };
3112
3113 /** \brief cop: interface enable/disable junk filtration reply
3114     @param context - returned sender context, to match reply w/ request
3115     @param retval - return code
3116 */
3117
3118 define cop_interface_enable_disable_reply {
3119     u32 context;
3120     i32 retval;
3121 };
3122
3123 /** \brief cop: enable/disable whitelist filtration features on an interface
3124     Note: the supplied fib_id must match in order to remove the feature!
3125     
3126     @param client_index - opaque cookie to identify the sender
3127     @param context - sender context, to match reply w/ request
3128     @param sw_if_index - interface handle, physical interfaces only
3129     @param fib_id - fib identifier for the whitelist / blacklist fib
3130     @param ip4 - 1 => enable ip4 filtration, 0=> disable ip4 filtration
3131     @param ip6 - 1 => enable ip6 filtration, 0=> disable ip6 filtration
3132     @param default_cop -  1 => enable non-ip4, non-ip6 filtration 0=> disable it
3133 */
3134
3135 define cop_whitelist_enable_disable {
3136     u32 client_index;
3137     u32 context;
3138     u32 sw_if_index;
3139     u32 fib_id;
3140     u8 ip4;
3141     u8 ip6;
3142     u8 default_cop;
3143 };
3144
3145 /** \brief cop: interface enable/disable junk filtration reply
3146     @param context - returned sender context, to match reply w/ request
3147     @param retval - return code
3148 */
3149
3150 define cop_whitelist_enable_disable_reply {
3151     u32 context;
3152     i32 retval;
3153 };
3154
3155 /** \brief get_node_graph - get a copy of the vpp node graph
3156     including the current set of graph arcs.
3157
3158     @param client_index - opaque cookie to identify the sender
3159     @param context - sender context, to match reply w/ request
3160 */
3161
3162 define get_node_graph {
3163     u32 client_index;
3164     u32 context;
3165 };
3166
3167 /** \brief get_node_graph_reply
3168     @param context - returned sender context, to match reply w/ request
3169     @param retval - return code
3170     @param reply_in_shmem - result from vlib_node_serialize, in shared
3171     memory. Process with vlib_node_unserialize, remember to switch
3172     heaps and free the result.
3173 */
3174
3175 define get_node_graph_reply {
3176     u32 context;
3177     i32 retval;
3178     u64 reply_in_shmem;
3179 };
3180
3181 /** \brief Clear interface statistics
3182     @param client_index - opaque cookie to identify the sender
3183     @param context - sender context, to match reply w/ request
3184     @param sw_if_index - index of the interface to clear statistics
3185 */
3186 define sw_interface_clear_stats {
3187     u32 client_index;
3188     u32 context;
3189     u32 sw_if_index;
3190 };
3191
3192 /** \brief Reply to sw_interface_clear_stats 
3193     @param context - sender context which was passed in the request
3194     @param retval - return code of the set flags request
3195 */
3196 define sw_interface_clear_stats_reply {
3197     u32 context;
3198     i32 retval;
3199 };
3200
3201 /** \brief IOAM Trace : Set TRACE profile
3202     @param id - profile id
3203     @param trace_type - Trace type
3204     @param trace_num_elt - Number of nodes in trace path
3205     @param trace_ppc - Trace PPC (none/encap/decap)
3206     @param trace_tsp - Trace timestamp precision (0-sec,1-ms,2-us,3-ns)
3207     @param trace_app_data - Trace application data, can be any 4 bytes
3208     @param pow_enable - Proof of Work enabled or not flag
3209     @param node_id - Id of this node
3210 */
3211 define trace_profile_add {
3212   u32 client_index;
3213   u32 context;
3214   u16 id;
3215   u8  trace_type;
3216   u8  trace_num_elt;
3217   u8  trace_ppc;
3218   u8  trace_tsp;
3219   u32 trace_app_data;
3220   u8  pow_enable;
3221   u32 node_id;
3222 };
3223
3224 /** \brief Trace profile add / del response
3225     @param context - sender context, to match reply w/ request
3226     @param retval - return value for request
3227 */
3228 define trace_profile_add_reply {
3229     u32 context;
3230     i32 retval;
3231 };
3232
3233 /** \brief IOAM Trace enable trace profile for a flow
3234     @param id - id of the trace profile to be applied
3235     @param dest_ipv6 - Destination IPv6 address
3236     @param prefix_length - prefix mask
3237     @param vrf_id - VRF ID
3238     @param trace_op - Trace operation (add/mod/del)
3239     @param enable - apply/remove the trace profile for the flow
3240 */
3241 define trace_profile_apply {
3242   u32 client_index;
3243   u32 context;
3244   u16 id;
3245   u8 dest_ipv6[16];
3246   u32 prefix_length;
3247   u32 vrf_id;
3248   u8 trace_op;
3249   u8 enable;
3250 };
3251
3252 /** \brief Trace profile apply response
3253     @param context - sender context, to match reply w/ request   
3254     @param retval - return value for request
3255 */
3256 define trace_profile_apply_reply {
3257   u32 context;
3258   i32 retval;
3259 };
3260
3261 /** \brief Delete Trace Profile 
3262     @param client_index - opaque cookie to identify the sender
3263     @param context - sender context, to match reply w/ request
3264     @param index - MAP Domain index
3265 */
3266 define trace_profile_del {
3267   u32 client_index;
3268   u32 context;
3269   u16 id;
3270 };
3271
3272 /** \brief Trace profile add / del response
3273     @param context - sender context, to match reply w/ request
3274     @param retval - return value for request
3275 */
3276 define trace_profile_del_reply {
3277     u32 context;
3278     i32 retval;
3279 };