/*- * BSD LICENSE * * Copyright(c) 2014-2017 Chelsio Communications. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Chelsio Communications nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __T4_PCI_ID_TBL_H__ #define __T4_PCI_ID_TBL_H__ /* * The Os-Dependent code can defined cpp macros for creating a PCI Device ID * Table. This is useful because it allows the PCI ID Table to be maintained * in a single place and all supporting OSes to get new PCI Device IDs * automatically. * * The macros are: * * CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN * -- Used to start the definition of the PCI ID Table. * * CH_PCI_DEVICE_ID_FUNCTION * -- The PCI Function Number to use in the PCI Device ID Table. "0" * -- for drivers attaching to PF0-3, "4" for drivers attaching to PF4, * -- "8" for drivers attaching to SR-IOV Virtual Functions, etc. * * CH_PCI_DEVICE_ID_FUNCTION2 [optional] * -- If defined, create a PCI Device ID Table with both * -- CH_PCI_DEVICE_ID_FUNCTION and CH_PCI_DEVICE_ID_FUNCTION2 populated. * * CH_PCI_ID_TABLE_ENTRY(DeviceID) * -- Used for the individual PCI Device ID entries. Note that we will * -- be adding a trailing comma (",") after all of the entries (and * -- between the pairs of entries if CH_PCI_DEVICE_ID_FUNCTION2 is defined). * * CH_PCI_DEVICE_ID_TABLE_DEFINE_END * -- Used to finish the definition of the PCI ID Table. Note that we * -- will be adding a trailing semi-colon (";") here. * * CH_PCI_DEVICE_ID_BYPASS_SUPPORTED [optional] * -- If defined, indicates that the OS Driver has support for Bypass * -- Adapters. */ #ifdef CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN /* * Some sanity checks ... */ #ifndef CH_PCI_DEVICE_ID_FUNCTION #error CH_PCI_DEVICE_ID_FUNCTION not defined! #endif #ifndef CH_PCI_ID_TABLE_ENTRY #error CH_PCI_ID_TABLE_ENTRY not defined! #endif #ifndef CH_PCI_DEVICE_ID_TABLE_DEFINE_END #error CH_PCI_DEVICE_ID_TABLE_DEFINE_END not defined! #endif /* * T4 and later ASICs use a PCI Device ID scheme of 0xVFPP where: * * V = "4" for T4; "5" for T5, etc. * F = "0" for PF 0..3; "4".."7" for PF4..7; and "8" for VFs * PP = adapter product designation * * We use this consistency in order to create the proper PCI Device IDs * for the specified CH_PCI_DEVICE_ID_FUNCTION. */ #ifndef CH_PCI_DEVICE_ID_FUNCTION2 #define CH_PCI_ID_TABLE_FENTRY(devid) \ CH_PCI_ID_TABLE_ENTRY((devid) | \ ((CH_PCI_DEVICE_ID_FUNCTION) << 8)) #else #define CH_PCI_ID_TABLE_FENTRY(devid) \ CH_PCI_ID_TABLE_ENTRY((devid) | \ ((CH_PCI_DEVICE_ID_FUNCTION) << 8)), \ CH_PCI_ID_TABLE_ENTRY((devid) | \ ((CH_PCI_DEVICE_ID_FUNCTION2) << 8)) #endif CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN /* * T5 adapters: */ CH_PCI_ID_TABLE_FENTRY(0x5000), /* T580-dbg */ CH_PCI_ID_TABLE_FENTRY(0x5001), /* T520-cr */ CH_PCI_ID_TABLE_FENTRY(0x5002), /* T522-cr */ CH_PCI_ID_TABLE_FENTRY(0x5003), /* T540-cr */ CH_PCI_ID_TABLE_FENTRY(0x5004), /* T520-bch */ CH_PCI_ID_TABLE_FENTRY(0x5005), /* T540-bch */ CH_PCI_ID_TABLE_FENTRY(0x5006), /* T540-ch */ CH_PCI_ID_TABLE_FENTRY(0x5007), /* T520-so */ CH_PCI_ID_TABLE_FENTRY(0x5008), /* T520-cx */ CH_PCI_ID_TABLE_FENTRY(0x5009), /* T520-bt */ CH_PCI_ID_TABLE_FENTRY(0x500a), /* T504-bt */ #ifdef CH_PCI_DEVICE_ID_BYPASS_SUPPORTED CH_PCI_ID_TABLE_FENTRY(0x500b), /* B520-sr */ CH_PCI_ID_TABLE_FENTRY(0x500c), /* B504-bt */ #endif CH_PCI_ID_TABLE_FENTRY(0x500d), /* T580-cr */ CH_PCI_ID_TABLE_FENTRY(0x500e), /* T540-LP-cr */ CH_PCI_ID_TABLE_FENTRY(0x5010), /* T580-LP-cr */ CH_PCI_ID_TABLE_FENTRY(0x5011), /* T520-LL-cr */ CH_PCI_ID_TABLE_FENTRY(0x5012), /* T560-cr */ CH_PCI_ID_TABLE_FENTRY(0x5013), /* T580-chr */ CH_PCI_ID_TABLE_FENTRY(0x5014), /* T580-so */ CH_PCI_ID_TABLE_FENTRY(0x5015), /* T502-bt */ CH_PCI_ID_TABLE_FENTRY(0x5080), /* Custom T540-cr */ CH_PCI_ID_TABLE_FENTRY(0x5081), /* Custom T540-LL-cr */ CH_PCI_ID_TABLE_FENTRY(0x5082), /* Custom T504-cr */ CH_PCI_ID_TABLE_FENTRY(0x5083), /* Custom T540-LP-CR */ CH_PCI_ID_TABLE_FENTRY(0x5084), /* Custom T580-cr */ CH_PCI_ID_TABLE_FENTRY(0x5085), /* Custom 3x T580-CR */ CH_PCI_ID_TABLE_FENTRY(0x5086), /* Custom 2x T580-CR */ CH_PCI_ID_TABLE_FENTRY(0x5087), /* Custom T580-CR */ CH_PCI_ID_TABLE_FENTRY(0x5088), /* Custom T570-CR */ CH_PCI_ID_TABLE_FENTRY(0x5089), /* Custom T520-CR */ CH_PCI_ID_TABLE_FENTRY(0x5090), /* Custom T540-CR */ CH_PCI_ID_TABLE_FENTRY(0x5091), /* Custom T522-CR */ CH_PCI_ID_TABLE_FENTRY(0x5092), /* Custom T520-CR */ /* T6 adapter */ CH_PCI_ID_TABLE_FENTRY(0x6001), /* T6225-CR */ CH_PCI_ID_TABLE_FENTRY(0x6002), /* T6225-SO-CR */ CH_PCI_ID_TABLE_FENTRY(0x6003), /* T6425-CR */ CH_PCI_ID_TABLE_FENTRY(0x6005), /* T6225-OCP */ CH_PCI_ID_TABLE_FENTRY(0x6007), /* T62100-LP-CR */ CH_PCI_ID_TABLE_FENTRY(0x6008), /* T62100-SO-CR */ CH_PCI_ID_TABLE_FENTRY(0x600d), /* T62100-CR */ CH_PCI_ID_TABLE_FENTRY(0x6011), /* T6225-LL-CR */ CH_PCI_ID_TABLE_FENTRY(0x6014), /* T61100-OCP-SO */ CH_PCI_ID_TABLE_FENTRY(0x6080), /* Custom T6225-CR SFP28 */ CH_PCI_ID_TABLE_FENTRY(0x6081), /* Custom T62100-CR */ CH_PCI_DEVICE_ID_TABLE_DEFINE_END; #endif /* CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN */ #endif /* __T4_PCI_ID_TBL_H__ */