/*- * BSD LICENSE * * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include "virtio_ethdev.h" #include "virtio_logs.h" #include "virtio_pci.h" #include "virtqueue.h" #include "virtio_rxtx.h" #include "virtio_user/virtio_user_dev.h" #define virtio_user_get_dev(hw) \ ((struct virtio_user_dev *)(hw)->virtio_user_dev) static void virtio_user_delayed_handler(void *param) { struct virtio_hw *hw = (struct virtio_hw *)param; struct rte_eth_dev *dev = &rte_eth_devices[hw->port_id]; rte_intr_callback_unregister(dev->intr_handle, virtio_interrupt_handler, dev); } static void virtio_user_read_dev_config(struct virtio_hw *hw, size_t offset, void *dst, int length) { int i; struct virtio_user_dev *dev = virtio_user_get_dev(hw); if (offset == offsetof(struct virtio_net_config, mac) && length == ETHER_ADDR_LEN) { for (i = 0; i < ETHER_ADDR_LEN; ++i) ((uint8_t *)dst)[i] = dev->mac_addr[i]; return; } if (offset == offsetof(struct virtio_net_config, status)) { char buf[128]; if (dev->vhostfd >= 0) { int r; int flags; flags = fcntl(dev->vhostfd, F_GETFL); if (fcntl(dev->vhostfd, F_SETFL, flags | O_NONBLOCK) == -1) { PMD_DRV_LOG(ERR, "error setting O_NONBLOCK flag"); return; } r = recv(dev->vhostfd, buf, 128, MSG_PEEK); if (r == 0 || (r < 0 && errno != EAGAIN)) { dev->status &= (~VIRTIO_NET_S_LINK_UP); PMD_DRV_LOG(ERR, "virtio-user port %u is down", hw->port_id); /* Only client mode is available now. Once the * connection is broken, it can never be up * again. Besides, this function could be called * in the process of interrupt handling, * callback cannot be unregistered here, set an * alarm to do it. */ rte_eal_alarm_set(1, virtio_user_delayed_handler, (void *)hw); } else { dev->status |= VIRTIO_NET_S_LINK_UP; } fcntl(dev->vhostfd, F_SETFL, flags & (~O_NONBLOCK)); } *(uint16_t *)dst = dev->status; } if (offset == offsetof(struct virtio_net_config, max_virtqueue_pairs)) *(uint16_t *)dst = dev->max_queue_pairs; } static void virtio_user_write_dev_config(struct virtio_hw *hw, size_t offset, const void *src, int length) { int i; struct virtio_user_dev *dev = virtio_user_get_dev(hw); if ((offset == offsetof(struct virtio_net_config, mac)) && (length == ETHER_ADDR_LEN)) for (i = 0; i < ETHER_ADDR_LEN; ++i) dev->mac_addr[i] = ((const uint8_t *)src)[i]; else PMD_DRV_LOG(ERR, "not supported offset=%zu, len=%d", offset, length); } static void virtio_user_reset(struct virtio_hw *hw) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); if (dev->status & VIRTIO_CONFIG_STATUS_DRIVER_OK) virtio_user_stop_device(dev); } static void virtio_user_set_status(struct virtio_hw *hw, uint8_t status) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); if (status & VIRTIO_CONFIG_STATUS_DRIVER_OK) virtio_user_start_device(dev); else if (status == VIRTIO_CONFIG_STATUS_RESET) virtio_user_reset(hw); dev->status = status; } static uint8_t virtio_user_get_status(struct virtio_hw *hw) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); return dev->status; } static uint64_t virtio_user_get_features(struct virtio_hw *hw) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); /* unmask feature bits defined in vhost user protocol */ return dev->device_features & VIRTIO_PMD_SUPPORTED_GUEST_FEATURES; } static void virtio_user_set_features(struct virtio_hw *hw, uint64_t features) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); dev->features = features & dev->device_features; } static uint8_t virtio_user_get_isr(struct virtio_hw *hw __rte_unused) { /* rxq interrupts and config interrupt are separated in virtio-user, * here we only report config change. */ return VIRTIO_PCI_ISR_CONFIG; } static uint16_t virtio_user_set_config_irq(struct virtio_hw *hw __rte_unused, uint16_t vec __rte_unused) { return 0; } static uint16_t virtio_user_set_queue_irq(struct virtio_hw *hw __rte_unused, struct virtqueue *vq __rte_unused, uint16_t vec) { /* pretend we have done that */ return vec; } /* This function is to get the queue size, aka, number of descs, of a specified * queue. Different with the VHOST_USER_GET_QUEUE_NUM, which is used to get the * max supported queues. */ static uint16_t virtio_user_get_queue_num(struct virtio_hw *hw, uint16_t queue_id __rte_unused) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); /* Currently, each queue has same queue size */ return dev->queue_size; } static int virtio_user_setup_queue(struct virtio_hw *hw, struct virtqueue *vq) { struct virtio_user_dev *dev = virtio_user_get_dev(hw); uint16_t queue_idx = vq->vq_queue_index; uint64_t desc_addr, avail_addr, used_addr; desc_addr = (uintptr_t)vq->vq_ring_virt_mem; avail_addr = desc_addr + vq->vq_nentries * sizeof(struct vring_desc); used_addr = RTE_ALIGN_CEIL(avail_addr + offsetof(struct vring_avail, ring[vq->vq_nentries]), VIRTIO_PCI_VRING_ALIGN); dev->vrings[queue_idx].num = vq->vq_nentries; dev->vrings[queue_idx].desc = (void *)(uintptr_t)desc_addr; dev->vrings[queue_idx].avail = (void *)(uintptr_t)avail_addr; dev->vrings[queue_idx].used = (void *)(uintptr_t)used_addr; return 0; } static void virtio_user_del_queue(struct virtio_hw *hw, struct virtqueue *vq) { /* For legacy devices, write 0 to VIRTIO_PCI_QUEUE_PFN port, QEMU * correspondingly stops the ioeventfds, and reset the status of * the device. * For modern devices, set queue desc, avail, used in PCI bar to 0, * not see any more behavior in QEMU. * * Here we just care about what information to deliver to vhost-user * or vhost-kernel. So we just close ioeventfd for now. */ struct virtio_user_dev *dev = virtio_user_get_dev(hw); close(dev->callfds[vq->vq_queue_index]); close(dev->kickfds[vq->vq_queue_index]); } static void virtio_user_notify_queue(struct virtio_hw *hw, struct virtqueue *vq) { uint64_t buf = 1; struct virtio_user_dev *dev = virtio_user_get_dev(hw); if (hw->cvq && (hw->cvq->vq == vq)) { virtio_user_handle_cq(dev, vq->vq_queue_index); return; } if (write(dev->kickfds[vq->vq_queue_index], &buf, sizeof(buf)) < 0) PMD_DRV_LOG(ERR, "failed to kick backend: %s", strerror(errno)); } const struct virtio_pci_ops virtio_user_ops = { .read_dev_cfg = virtio_user_read_dev_config, .write_dev_cfg = virtio_user_write_dev_config, .reset = virtio_user_reset, .get_status = virtio_user_get_status, .set_status = virtio_user_set_status, .get_features = virtio_user_get_features, .set_features = virtio_user_set_features, .get_isr = virtio_user_get_isr, .set_config_irq = virtio_user_set_config_irq, .set_queue_irq = virtio_user_set_queue_irq, .get_queue_num = virtio_user_get_queue_num, .setup_queue = virtio_user_setup_queue, .del_queue = virtio_user_del_queue, .notify_queue = virtio_user_notify_queue, }; static const char *valid_args[] = { #define VIRTIO_USER_ARG_QUEUES_NUM "queues" VIRTIO_USER_ARG_QUEUES_NUM, #define VIRTIO_USER_ARG_CQ_NUM "cq" VIRTIO_USER_ARG_CQ_NUM, #define VIRTIO_USER_ARG_MAC "mac" VIRTIO_USER_ARG_MAC, #define VIRTIO_USER_ARG_PATH "path" VIRTIO_USER_ARG_PATH, #define VIRTIO_USER_ARG_QUEUE_SIZE "queue_size" VIRTIO_USER_ARG_QUEUE_SIZE, #define VIRTIO_USER_ARG_INTERFACE_NAME "iface" VIRTIO_USER_ARG_INTERFACE_NAME, NULL }; #define VIRTIO_USER_DEF_CQ_EN 0 #define VIRTIO_USER_DEF_Q_NUM 1 #define VIRTIO_USER_DEF_Q_SZ 256 static int get_string_arg(const char *key __rte_unused, const char *value, void *extra_args) { if (!value || !extra_args) return -EINVAL; *(char **)extra_args = strdup(value); if (!*(char **)extra_args) return -ENOMEM; return 0; } static int get_integer_arg(const char *key __rte_unused, const char *value, void *extra_args) { if (!value || !extra_args) return -EINVAL; *(uint64_t *)extra_args = strtoull(value, NULL, 0); return 0; } static struct rte_vdev_driver virtio_user_driver; static struct rte_eth_dev * virtio_user_eth_dev_alloc(struct rte_vdev_device *vdev) { struct rte_eth_dev *eth_dev; struct rte_eth_dev_data *data; struct virtio_hw *hw; struct virtio_user_dev *dev; eth_dev = rte_eth_vdev_allocate(vdev, sizeof(*hw)); if (!eth_dev) { PMD_INIT_LOG(ERR, "cannot alloc rte_eth_dev"); return NULL; } data = eth_dev->data; hw = eth_dev->data->dev_private; dev = rte_zmalloc(NULL, sizeof(*dev), 0); if (!dev) { PMD_INIT_LOG(ERR, "malloc virtio_user_dev failed"); rte_eth_dev_release_port(eth_dev); rte_free(hw); return NULL; } hw->port_id = data->port_id; dev->port_id = data->port_id; virtio_hw_internal[hw->port_id].vtpci_ops = &virtio_user_ops; /* * MSIX is required to enable LSC (see virtio_init_device). * Here just pretend that we support msix. */ hw->use_msix = 1; hw->modern = 0; hw->use_simple_rx = 0; hw->use_simple_tx = 0; hw->virtio_user_dev = dev; return eth_dev; } static void virtio_user_eth_dev_free(struct rte_eth_dev *eth_dev) { struct rte_eth_dev_data *data = eth_dev->data; struct virtio_hw *hw = data->dev_private; rte_free(hw->virtio_user_dev); rte_free(hw); rte_eth_dev_release_port(eth_dev); } /* Dev initialization routine. Invoked once for each virtio vdev at * EAL init time, see rte_bus_probe(). * Returns 0 on success. */ static int virtio_user_pmd_probe(struct rte_vdev_device *dev) { struct rte_kvargs *kvlist = NULL; struct rte_eth_dev *eth_dev; struct virtio_hw *hw; uint64_t queues = VIRTIO_USER_DEF_Q_NUM; uint64_t cq = VIRTIO_USER_DEF_CQ_EN; uint64_t queue_size = VIRTIO_USER_DEF_Q_SZ; char *path = NULL; char *ifname = NULL; char *mac_addr = NULL; int ret = -1; kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_args); if (!kvlist) { PMD_INIT_LOG(ERR, "error when parsing param"); goto end; } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_PATH) == 1) { if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_PATH, &get_string_arg, &path) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_PATH); goto end; } } else { PMD_INIT_LOG(ERR, "arg %s is mandatory for virtio_user", VIRTIO_USER_ARG_PATH); goto end; } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_INTERFACE_NAME) == 1) { if (is_vhost_user_by_type(path)) { PMD_INIT_LOG(ERR, "arg %s applies only to vhost-kernel backend", VIRTIO_USER_ARG_INTERFACE_NAME); goto end; } if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_INTERFACE_NAME, &get_string_arg, &ifname) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_INTERFACE_NAME); goto end; } } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_MAC) == 1) { if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_MAC, &get_string_arg, &mac_addr) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_MAC); goto end; } } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_QUEUE_SIZE) == 1) { if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_QUEUE_SIZE, &get_integer_arg, &queue_size) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_QUEUE_SIZE); goto end; } } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_QUEUES_NUM) == 1) { if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_QUEUES_NUM, &get_integer_arg, &queues) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_QUEUES_NUM); goto end; } } if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_CQ_NUM) == 1) { if (rte_kvargs_process(kvlist, VIRTIO_USER_ARG_CQ_NUM, &get_integer_arg, &cq) < 0) { PMD_INIT_LOG(ERR, "error to parse %s", VIRTIO_USER_ARG_CQ_NUM); goto end; } } else if (queues > 1) { cq = 1; } if (queues > 1 && cq == 0) { PMD_INIT_LOG(ERR, "multi-q requires ctrl-q"); goto end; } if (queues > VIRTIO_MAX_VIRTQUEUE_PAIRS) { PMD_INIT_LOG(ERR, "arg %s %" PRIu64 " exceeds the limit %u", VIRTIO_USER_ARG_QUEUES_NUM, queues, VIRTIO_MAX_VIRTQUEUE_PAIRS); goto end; } if (rte_eal_process_type() == RTE_PROC_PRIMARY) { eth_dev = virtio_user_eth_dev_alloc(dev); if (!eth_dev) { PMD_INIT_LOG(ERR, "virtio_user fails to alloc device"); goto end; } hw = eth_dev->data->dev_private; if (virtio_user_dev_init(hw->virtio_user_dev, path, queues, cq, queue_size, mac_addr, &ifname) < 0) { PMD_INIT_LOG(ERR, "virtio_user_dev_init fails"); virtio_user_eth_dev_free(eth_dev); goto end; } } else { eth_dev = rte_eth_dev_attach_secondary(rte_vdev_device_name(dev)); if (!eth_dev) goto end; } /* previously called by rte_pci_probe() for physical dev */ if (eth_virtio_dev_init(eth_dev) < 0) { PMD_INIT_LOG(ERR, "eth_virtio_dev_init fails"); virtio_user_eth_dev_free(eth_dev); goto end; } ret = 0; end: if (kvlist) rte_kvargs_free(kvlist); if (path) free(path); if (mac_addr) free(mac_addr); if (ifname) free(ifname); return ret; } /** Called by rte_eth_dev_detach() */ static int virtio_user_pmd_remove(struct rte_vdev_device *vdev) { const char *name; struct rte_eth_dev *eth_dev; struct virtio_hw *hw; struct virtio_user_dev *dev; if (!vdev) return -EINVAL; name = rte_vdev_device_name(vdev); PMD_DRV_LOG(INFO, "Un-Initializing %s", name); eth_dev = rte_eth_dev_allocated(name); if (!eth_dev) return -ENODEV; /* make sure the device is stopped, queues freed */ rte_eth_dev_close(eth_dev->data->port_id); hw = eth_dev->data->dev_private; dev = hw->virtio_user_dev; virtio_user_dev_uninit(dev); rte_free(eth_dev->data->dev_private); rte_eth_dev_release_port(eth_dev); return 0; } static struct rte_vdev_driver virtio_user_driver = { .probe = virtio_user_pmd_probe, .remove = virtio_user_pmd_remove, }; RTE_PMD_REGISTER_VDEV(net_virtio_user, virtio_user_driver); RTE_PMD_REGISTER_ALIAS(net_virtio_user, virtio_user); RTE_PMD_REGISTER_PARAM_STRING(net_virtio_user, "path= " "mac= " "cq= " "queue_size= " "queues= " "iface=");