#!/usr/bin/env python3 import unittest from ipaddress import ip_address, ip_interface from vpp_qemu_utils import ( create_namespace, delete_namespace, create_host_interface, delete_host_interfaces, set_interface_mtu, disable_interface_gso, add_namespace_route, ) from vpp_iperf import start_iperf, stop_iperf from framework import VppTestCase, VppTestRunner from config import config from vpp_papi import VppEnum import time import sys from vm_test_config import test_config # # Tests for: # - tapv2, tunv2 & af_packet_v2 & v3 interfaces. # - reads test config from the file vm_test_config.py # - Uses iPerf to send TCP/IP streams to VPP # - VPP ingress interface runs the iperf client # - VPP egress interface runs the iperf server # - Runs tests specified in the vm_test_config module and verifies that: # - TCP over IPv4 and IPv6 is enabled correctly for Bridged and Routed topologies. # sending jumbo frames (9000/9001 MTUs) with GSO/GRO is enabled correctly. # sending VPP buffer-sized frames(2048 MTU) with GSO/GRO is enabled correctly. # sending standard frames (1500 MTU) with GSO/GRO is enabled correctly. # sending smaller frames (512 MTU) with GSO/GRO is enabled correctly for IPv4 # sending odd sized frames (9001, 2049 MTU) with GSO/GRO is enabled correctly. # def filter_tests(test): """Filter test IDs to include only those selected to run.""" selection = test_config["tests_to_run"] if not selection or selection == " ": return True else: test_ids_to_run = [] for test_id in selection.split(","): if "-" in test_id.strip(): start, end = map(int, test_id.split("-")) test_ids_to_run.extend(list(range(start, end + 1))) elif test_id.strip(): test_ids_to_run.append(int(test_id)) return test["id"] in test_ids_to_run # Test Config variables client_namespace = test_config["client_namespace"] server_namespace = test_config["server_namespace"] tests = filter(filter_tests, test_config["tests"]) af_packet_config = test_config["af_packet"] layer2 = test_config["L2"] layer3 = test_config["L3"] def create_test(test_name, test, ip_version, mtu): """Create and return a unittest method for a test.""" @unittest.skipIf( config.skip_netns_tests, "netns not available or disabled from cli" ) def test_func(self): self.logger.debug(f"Starting unittest:{test_name}") self.setUpTestToplogy(test=test, ip_version=ip_version) result = self.set_interfaces_mtu( mtu=mtu, ip_version=ip_version, vpp_interfaces=self.vpp_interfaces, linux_interfaces=self.linux_interfaces, ) # Start the Iperf server in dual stack mode & run iperf client if result is True: start_iperf(ip_version=6, server_only=True, logger=self.logger) self.assertTrue( start_iperf( ip_version=ip_version, server_ipv4_address=self.server_ip4_address, server_ipv6_address=self.server_ip6_address, client_only=True, duration=2, logger=self.logger, ) ) else: print( f"Skipping test:{test_name} as mtu:{mtu} is " f"invalid for TCP/IPv{ip_version}" ) test_func.__name__ = test_name return test_func def generate_vpp_interface_tests(): """Generate unittests for testing vpp interfaces.""" if config.skip_netns_tests: print("Skipping netns tests") for test in tests: for ip_version in test_config["ip_versions"]: for mtu in test_config["mtus"]: test_name = ( f"test_id_{test['id']}_" + f"client_{test['client_if_type']}" + f"_v{test['client_if_version']}_" + f"gso_{test.get('client_if_gso', 0)}_" + f"gro_{test.get('client_if_gro', 0)}_" + f"to_server_{test['server_if_type']}" + f"_v{test['server_if_version']}_" + f"gso_{test.get('server_if_gso', 0)}_" + f"gro_{test.get('server_if_gro', 0)}_" + f"mtu_{mtu}_mode_{test['x_connect_mode']}_" + f"tcp_ipv{ip_version}" ) test_func = create_test( test_name=test_name, test=test, ip_version=ip_version, mtu=mtu ) setattr(TestVPPInterfacesQemu, test_name, test_func) class TestVPPInterfacesQemu(VppTestCase): """Test VPP interfaces inside a QEMU VM for IPv4/v6. Test Setup: Linux_ns1--iperfClient--host-int1--vpp-af_packet-int1--VPP-BD --vppaf_packet_int2--host-int2--iperfServer--Linux_ns2 """ @classmethod def setUpClass(cls): super(TestVPPInterfacesQemu, cls).setUpClass() @classmethod def tearDownClass(cls): super(TestVPPInterfacesQemu, cls).tearDownClass() def setUpTestToplogy(self, test, ip_version): """Setup the test topology. 1. Create Linux Namespaces for iPerf Client & Server. 2. Create VPP iPerf client and server virtual interfaces. 3. Enable desired vif features such as GSO & GRO. 3. Cross-Connect interfaces in VPP using L2 or L3. """ super(TestVPPInterfacesQemu, self).setUp() client_if_type = test["client_if_type"] server_if_type = test["server_if_type"] client_if_version = test["client_if_version"] server_if_version = test["server_if_version"] x_connect_mode = test["x_connect_mode"] # server ip4/ip6 addresses required by iperf client server_ip4_prefix = ( layer2["server_ip4_prefix"] if x_connect_mode == "L2" else layer3["server_ip4_prefix"] ) server_ip6_prefix = ( layer2["server_ip6_prefix"] if x_connect_mode == "L2" else layer3["server_ip6_prefix"] ) self.server_ip4_address = str(ip_interface(server_ip4_prefix).ip) self.server_ip6_address = str(ip_interface(server_ip6_prefix).ip) # next-hop IP address on VPP for routing from client & server namespaces vpp_client_prefix = ( layer3["vpp_client_ip4_prefix"] if ip_version == 4 else layer3["vpp_client_ip6_prefix"] ) vpp_client_nexthop = str(ip_interface(vpp_client_prefix).ip) vpp_server_prefix = ( layer3["vpp_server_ip4_prefix"] if ip_version == 4 else layer3["vpp_server_ip6_prefix"] ) vpp_server_nexthop = str(ip_interface(vpp_server_prefix).ip) create_namespace([client_namespace, server_namespace]) self.vpp_interfaces = [] self.linux_interfaces = [] enable_client_if_gso = test.get("client_if_gso", 0) enable_server_if_gso = test.get("server_if_gso", 0) enable_client_if_gro = test.get("client_if_gro", 0) enable_server_if_gro = test.get("server_if_gro", 0) ## Handle client interface types if client_if_type == "af_packet": create_host_interface( af_packet_config["iprf_client_interface_on_linux"], af_packet_config["iprf_client_interface_on_vpp"], client_namespace, layer2["client_ip4_prefix"] if x_connect_mode == "L2" else layer3["client_ip4_prefix"], layer2["client_ip6_prefix"] if x_connect_mode == "L2" else layer3["client_ip6_prefix"], ) self.ingress_if_idx = self.create_af_packet( version=client_if_version, host_if_name=af_packet_config["iprf_client_interface_on_vpp"], enable_gso=enable_client_if_gso, ) self.vpp_interfaces.append(self.ingress_if_idx) self.linux_interfaces.append( ["", af_packet_config["iprf_client_interface_on_vpp"]] ) self.linux_interfaces.append( [client_namespace, af_packet_config["iprf_client_interface_on_linux"]] ) if enable_client_if_gso == 0: disable_interface_gso( "", af_packet_config["iprf_client_interface_on_vpp"] ) disable_interface_gso( client_namespace, af_packet_config["iprf_client_interface_on_linux"] ) elif client_if_type == "tap" or client_if_type == "tun": self.ingress_if_idx = self.create_tap_tun( id=101, host_namespace=client_namespace, ip_version=ip_version, host_ip4_prefix=layer2["client_ip4_prefix"] if x_connect_mode == "L2" else layer3["client_ip4_prefix"], host_ip6_prefix=layer2["client_ip6_prefix"] if x_connect_mode == "L2" else layer3["client_ip6_prefix"], host_ip4_gw=vpp_client_nexthop if x_connect_mode == "L3" and ip_version == 4 else None, host_ip6_gw=vpp_client_nexthop if x_connect_mode == "L3" and ip_version == 6 else None, int_type=client_if_type, host_if_name=f"{client_if_type}0", enable_gso=enable_client_if_gso, enable_gro=enable_client_if_gro, ) self.vpp_interfaces.append(self.ingress_if_idx) self.linux_interfaces.append([client_namespace, f"{client_if_type}0"]) # Seeing TCP timeouts if tx=on & rx=on Linux tap & tun interfaces disable_interface_gso(client_namespace, f"{client_if_type}0") else: print( f"Unsupported client interface type: {client_if_type} " f"for test - ID={test['id']}" ) sys.exit(1) if server_if_type == "af_packet": create_host_interface( af_packet_config["iprf_server_interface_on_linux"], af_packet_config["iprf_server_interface_on_vpp"], server_namespace, server_ip4_prefix, server_ip6_prefix, ) self.egress_if_idx = self.create_af_packet( version=server_if_version, host_if_name=af_packet_config["iprf_server_interface_on_vpp"], enable_gso=enable_server_if_gso, ) self.vpp_interfaces.append(self.egress_if_idx) self.linux_interfaces.append( ["", af_packet_config["iprf_server_interface_on_vpp"]] ) self.linux_interfaces.append( [server_namespace, af_packet_config["iprf_server_interface_on_linux"]] ) if enable_server_if_gso == 0: disable_interface_gso( "", af_packet_config["iprf_server_interface_on_vpp"] ) disable_interface_gso( server_namespace, af_packet_config["iprf_server_interface_on_linux"] ) elif server_if_type == "tap" or server_if_type == "tun": self.egress_if_idx = self.create_tap_tun( id=102, host_namespace=server_namespace, ip_version=ip_version, host_ip4_prefix=layer2["server_ip4_prefix"] if x_connect_mode == "L2" else layer3["server_ip4_prefix"], host_ip6_prefix=layer2["server_ip6_prefix"] if x_connect_mode == "L2" else layer3["server_ip6_prefix"], int_type=server_if_type, host_if_name=f"{server_if_type}0", enable_gso=enable_server_if_gso, enable_gro=enable_server_if_gro, ) self.vpp_interfaces.append(self.egress_if_idx) self.linux_interfaces.append([server_namespace, f"{server_if_type}0"]) # Seeing TCP timeouts if tx=on & rx=on Linux tap & tun interfaces disable_interface_gso(server_namespace, f"{server_if_type}0") else: print( f"Unsupported server interface type: {server_if_type} " f"for test - ID={test['id']}" ) sys.exit(1) if x_connect_mode == "L2": self.l2_connect_interfaces(1, self.ingress_if_idx, self.egress_if_idx) elif x_connect_mode == "L3": # L3 connect client & server side vrf_id = layer3["ip4_vrf"] if ip_version == 4 else layer3["ip6_vrf"] self.l3_connect_interfaces( ip_version, vrf_id, (self.ingress_if_idx, vpp_client_prefix), (self.egress_if_idx, vpp_server_prefix), ) # Setup namespace routing if ip_version == 4: add_namespace_route(client_namespace, "0.0.0.0/0", vpp_client_nexthop) add_namespace_route(server_namespace, "0.0.0.0/0", vpp_server_nexthop) else: add_namespace_route(client_namespace, "::/0", vpp_client_nexthop) add_namespace_route(server_namespace, "::/0", vpp_server_nexthop) # Wait for Linux IPv6 stack to become ready if ip_version == 6: time.sleep(2) def tearDown(self): try: self.vapi.tap_delete_v2(self.ingress_if_idx) except Exception: pass try: self.vapi.tap_delete_v2(self.egress_if_idx) except Exception: pass try: for interface in self.vapi.af_packet_dump(): if ( interface.host_if_name == af_packet_config["iprf_client_interface_on_vpp"] ): self.vapi.af_packet_delete( af_packet_config["iprf_client_interface_on_vpp"] ) elif ( interface.host_if_name == af_packet_config["iprf_server_interface_on_vpp"] ): self.vapi.af_packet_delete( af_packet_config["iprf_server_interface_on_vpp"] ) except Exception: pass try: delete_host_interfaces( af_packet_config["iprf_client_interface_on_linux"], af_packet_config["iprf_server_interface_on_linux"], af_packet_config["iprf_client_interface_on_vpp"], af_packet_config["iprf_server_interface_on_vpp"], ) except Exception: pass try: self.vapi.ip_table_add_del(is_add=0, table={"table_id": layer3["ip4_vrf"]}) except Exception: pass try: self.vapi.ip_table_add_del(is_add=0, table={"table_id": layer3["ip6_vrf"]}) except Exception: pass try: delete_namespace( [ client_namespace, server_namespace, ] ) except Exception: pass try: stop_iperf() except Exception: pass def create_af_packet(self, version, host_if_name, enable_gso=0): """Create an af_packetv3 interface in VPP. Parameters: version -- 2 for af_packet_create_v2 -- 3 for af_packet_create_v3 host_if_name -- host interface name enable_gso -- Enable GSO on the interface when True """ af_packet_mode = VppEnum.vl_api_af_packet_mode_t af_packet_interface_mode = af_packet_mode.AF_PACKET_API_MODE_ETHERNET af_packet_flags = VppEnum.vl_api_af_packet_flags_t af_packet_interface_flags = af_packet_flags.AF_PACKET_API_FLAG_QDISC_BYPASS if enable_gso: af_packet_interface_flags = ( af_packet_interface_flags | af_packet_flags.AF_PACKET_API_FLAG_CKSUM_GSO ) if version == 2: af_packet_interface_flags = ( af_packet_interface_flags | af_packet_flags.AF_PACKET_API_FLAG_VERSION_2 ) api_args = { "use_random_hw_addr": True, "host_if_name": host_if_name, "flags": af_packet_interface_flags, } api_args["mode"] = af_packet_interface_mode result = self.vapi.af_packet_create_v3(**api_args) sw_if_index = result.sw_if_index # Enable software GSO chunking when interface doesn't support GSO offload if enable_gso == 0: self.vapi.feature_gso_enable_disable( sw_if_index=sw_if_index, enable_disable=1 ) else: self.vapi.feature_gso_enable_disable( sw_if_index=sw_if_index, enable_disable=0 ) self.vapi.sw_interface_set_flags(sw_if_index=sw_if_index, flags=1) return sw_if_index def create_tap_tun( self, id, host_namespace, ip_version, host_ip4_prefix=None, host_ip6_prefix=None, host_ip4_gw=None, host_ip6_gw=None, int_type="tap", host_if_name=None, enable_gso=0, enable_gro=0, ): """Create a tapv2 or tunv2 interface in VPP and attach to host. Parameters: id -- interface ID host_namespace -- host namespace to attach the tap/tun interface to ip_version -- 4 or 6 host_ip4_prefix -- ipv4 host interface address in CIDR notation if ip_version=4 host_ip6_prefix -- ipv6 host interface address in CIDR notation if ip_version=6 host_ip4_gw -- host IPv4 default gateway IP Address host_ip6_gw -- host IPv6 default gateway IP address int_type -- "tap" for tapv2 & "tun" for tunv2 interface host_if_name -- host side interface name enable_gso -- enable GSO enable_gro -- enable GSO/GRO-Coalesce """ TapFlags = VppEnum.vl_api_tap_flags_t tap_flags = 0 if int_type == "tun": tap_flags = TapFlags.TAP_API_FLAG_TUN if enable_gro: tap_flags = tap_flags | ( TapFlags.TAP_API_FLAG_GSO | TapFlags.TAP_API_FLAG_GRO_COALESCE ) elif enable_gso: tap_flags = tap_flags | TapFlags.TAP_API_FLAG_GSO elif int_type == "tap": if enable_gro: tap_flags = ( TapFlags.TAP_API_FLAG_GSO | TapFlags.TAP_API_FLAG_GRO_COALESCE ) elif enable_gso: tap_flags = TapFlags.TAP_API_FLAG_GSO api_args = { "id": id, "host_namespace_set": True, "host_namespace": host_namespace, "host_if_name_set": False, "host_bridge_set": False, "host_mac_addr_set": False, } if tap_flags != 0: api_args["tap_flags"] = tap_flags if ip_version == 4: api_args["host_ip4_prefix"] = ip_interface(host_ip4_prefix) api_args["host_ip4_prefix_set"] = True if host_ip4_gw: api_args["host_ip4_gw"] = ip_address(host_ip4_gw) api_args["host_ip4_gw_set"] = True if ip_version == 6: api_args["host_ip6_prefix"] = ip_interface(host_ip6_prefix) api_args["host_ip6_prefix_set"] = True if host_ip6_gw: api_args["host_ip6_gw"] = ip_address(host_ip6_gw) api_args["host_ip6_gw_set"] = True if host_if_name: api_args["host_if_name"] = host_if_name api_args["host_if_name_set"] = True result = self.vapi.tap_create_v2(**api_args) sw_if_index = result.sw_if_index # Enable software GSO chunking when interface doesn't support GSO offload and # GRO coalesce if enable_gso == 0 and enable_gro == 0: self.vapi.feature_gso_enable_disable( sw_if_index=sw_if_index, enable_disable=1 ) else: self.vapi.feature_gso_enable_disable( sw_if_index=sw_if_index, enable_disable=0 ) # Admin up self.vapi.sw_interface_set_flags(sw_if_index=sw_if_index, flags=1) return sw_if_index def dump_bridge_domain_details(self, bd_id): return self.vapi.bridge_domain_dump(bd_id=bd_id) def l2_connect_interfaces(self, bridge_id, *sw_if_idxs): for if_idx in sw_if_idxs: self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=if_idx, bd_id=bridge_id, shg=0, port_type=0, enable=True ) def l3_connect_interfaces(self, ip_version, vrf_id, *if_idx_ip_prefixes): """Setup routing for (if_idx, ip_prefix) inside VPP. arguments: if_idx_ip_prefixes -- sequence of (if_idx, ip_prefix) tuples ip_version -- 4 or 6 vrf_id -- vrf_id """ is_ipv6 = 0 if ip_version == 4 else 1 self.vapi.ip_table_add_del( is_add=1, table={"table_id": vrf_id, "is_ip6": is_ipv6} ) for sw_if_index, ip_prefix in if_idx_ip_prefixes: self.vapi.sw_interface_set_table( sw_if_index=sw_if_index, is_ipv6=is_ipv6, vrf_id=vrf_id ) self.vapi.sw_interface_add_del_address( sw_if_index=sw_if_index, is_add=1, prefix=ip_interface(ip_prefix) ) def set_interfaces_mtu(self, mtu, ip_version, **kwargs): """Set MTUs on VPP and Linux interfaces. arguments -- mtu -- mtu value ip_version - 4 or 6 kwargs['vpp_interfaces'] -- list of vpp interface if indexes kwargs['linux_interfaces'] -- list of tuples (namespace, interface_names) return True if mtu is set, else False """ vpp_interfaces = kwargs.get("vpp_interfaces") linux_interfaces = kwargs.get("linux_interfaces") # IPv6 on Linux requires an MTU value >=1280 if (ip_version == 6 and mtu >= 1280) or ip_version == 4: for sw_if_idx in vpp_interfaces: self.vapi.sw_interface_set_mtu( sw_if_index=sw_if_idx, mtu=[mtu, 0, 0, 0] ) for namespace, interface_name in linux_interfaces: set_interface_mtu( namespace=namespace, interface=interface_name, mtu=mtu, logger=self.logger, ) return True else: return False generate_vpp_interface_tests() if __name__ == "__main__": unittest.main(testRunner=VppTestRunner)