-CSIT TAGs Descriptions
-======================
+CSIT TAGs
+=========
All CSIT test cases are labelled with Robot Framework tags used to allow for
easy test case type identification, test case grouping and selection for
2x1,000,000 entries in single fib table
+.. topic:: L2BD_1
+
+ Test with 1 L2 bridge domain.
+
+.. topic:: L2BD_10
+
+ Test with 10 L2 bridge domains.
+
+.. topic:: L2BD_100
+
+ Test with 100 L2 bridge domains.
+
+.. topic:: L2BD_1K
+
+ Test with 1000 L2 bridge domains.
+
+.. topic:: VLAN_1
+
+ Test with 1 VLAN sub-interface.
+
+.. topic:: VLAN_10
+
+ Test with 10 VLAN sub-interfaces.
+
+.. topic:: VLAN_100
+
+ Test with 100 VLAN sub-interfaces.
+
+.. topic:: VLAN_1K
+
+ Test with 1000 VLAN sub-interfaces.
+
+.. topic:: VXLAN_1
+
+ Test with 1 VXLAN tunnel.
+
+.. topic:: VXLAN_10
+
+ Test with 10 VXLAN tunnels.
+
+.. topic:: VXLAN_100
+
+ Test with 100 VXLAN tunnels.
+
+.. topic:: VXLAN_1K
+
+ Test with 1000 VXLAN tunnels.
+
.. topic:: TNL_1000
IPSec in tunnel mode - 1000 tunnels.
Single test finding both No Drop Rate and Partial Drop Rate simultaneously.
The search is done by optimized algorithm which performs
multiple trial runs at different durations and transmit rates.
+ The results come from the final trials, which have duration of 30 seconds.
.. topic:: MRR
Performance tests where TG sends the traffic at maximum rate (line rate)
- and reports total sent/received packets over performance trial duration.
+ and reports total sent/received packets over trial duration.
+ The result is an average of 10 trials of 1 second duration.
Ethernet frame size tags for performance tests
----------------------------------------------