-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.IPUtil
-| ...
+|
| Documentation | IPv4 keywords
*** Keywords ***
| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix
| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24
| | ... | and next hop of neighbour DUT interface IPv4 address.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - remote_host1_ip - IP address of remote host1 (Optional).
| | ... | Type: string
| | ... | - remote_host2_ip - IP address of remote host2 (Optional).
| | ... | Type: string
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 forwarding in circular topology \
| | ... | \| 192.168.0.1 \| 192.168.0.2 \|
-| | ...
+| |
| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
| | Set interfaces in path up
-| | ...
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac}
+| |
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 10.10.10.2 | ${TG_pf1_mac}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 1.1.1.2 | ${DUT2_${int}1_mac}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | 1.1.1.1 | ${DUT1_${int}2_mac}[0]
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2}
| | ... | ELSE | Set Variable | ${dut1}
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 20.20.20.2 | ${tg_if2_mac}
-| | ...
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
+| | ... | Set Variable | ${DUT2_${int}2}[0]
+| | ... | ELSE | Set Variable | ${DUT1_${int}2}[0]
+| | VPP Add IP Neighbor
+| | ... | ${dut} | ${dut_if2} | 20.20.20.2 | ${TG_pf2_mac}[0]
+| |
+| | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}1}[0]
| | ... | 10.10.10.1 | 24
| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2}
+| | ... | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}2}[0]
| | ... | 1.1.1.1 | 30
| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1}
+| | ... | VPP Interface Set IP Address | ${dut2} | ${DUT2_${int}1}[0]
| | ... | 1.1.1.2 | 30
| | VPP Interface Set IP Address | ${dut} | ${dut_if2}
| | ... | 20.20.20.1 | 24
-| | ...
+| |
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
-| | ... | interface=${dut1_if2}
+| | ... | interface=${DUT1_${int}2}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
-| | ... | interface=${dut2_if1}
-| | ...
+| | ... | interface=${DUT2_${int}1}[0]
+| |
| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
-| | ... | gateway=10.10.10.2 | interface=${dut1_if1}
+| | ... | gateway=10.10.10.2 | interface=${DUT1_${int}1}[0]
| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 32
| | ... | gateway=20.20.20.2 | interface=${dut_if2}
| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
-| | ... | gateway=1.1.1.2 | interface=${dut1_if2}
+| | ... | gateway=1.1.1.2 | interface=${DUT1_${int}2}[0]
| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 32
-| | ... | gateway=1.1.1.1 | interface=${dut2_if1}
+| | ... | gateway=1.1.1.1 | interface=${DUT2_${int}1}[0]
| Initialize IPv4 forwarding with scaling in circular topology
| | [Documentation]
| | ... | Custom setup of IPv4 topology with scalability of ip routes on all
| | ... | DUT nodes in 2-node / 3-node circular topology
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - count - IP route count. Type: integer
-| | ...
+| |
| | ... | *Return:*
| | ... | - No value returned
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 forwarding with scaling in 3-node circular \
| | ... | topology \| 100000 \|
-| | ...
+| |
| | [Arguments] | ${count}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
| | Set interfaces in path up
-| | ...
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg_if1_mac}
+| |
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 1.1.1.1 | ${TG_pf1_mac}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2.2.2.2 | ${DUT2_${int}1}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac}
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | 2.2.2.1 | ${DUT1_${int}2_mac}[0]
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2}
| | ... | ELSE | Set Variable | ${dut1}
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg_if2_mac}
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30
+| | ... | Set Variable | ${DUT2_${int}2}[0]
+| | ... | ELSE | Set Variable | ${DUT1_${int}2}[0]
+| | VPP Add IP Neighbor
+| | ... | ${dut} | ${dut_if2} | 3.3.3.1 | ${TG_pf2_mac}[0]
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 1.1.1.2 | 30
| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2.2.2.1
+| | ... | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}2}[0] | 2.2.2.1
| | ... | 30
| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 2.2.2.2
+| | ... | VPP Interface Set IP Address | ${dut2} | ${DUT2_${int}1}[0] | 2.2.2.2
| | ... | 30
| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 3.3.3.2 | 30
| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | gateway=1.1.1.1
-| | ... | interface=${dut1_if1} | count=${count}
+| | ... | interface=${DUT1_${int}1}[0] | count=${count}
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | gateway=2.2.2.2
-| | ... | interface=${dut1_if2} | count=${count}
+| | ... | interface=${DUT1_${int}2}[0] | count=${count}
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | gateway=2.2.2.1
-| | ... | interface=${dut2_if1} | count=${count}
+| | ... | interface=${DUT2_${int}1}[0] | count=${count}
| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | gateway=3.3.3.1
| | ... | interface=${dut_if2} | count=${count}
| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
| | ... | Memif interface to separate IPv4 VRF with one physical or
| | ... | virtual interface to create a chain accross DUT node.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 routing with memif pairs \| ${1} \|
-| | ...
+| |
| | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
| | | Initialize IPv4 routing with memif pairs on DUT node | ${dut} | ${count}
+| | END
| | Set interfaces in path up
| | Show Memif on all DUTs | ${nodes}
| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface
| | ... | to separate IPv4 VRF with one physical or virtual interface
| | ... | to create a chain accross DUT node.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut - DUT node. Type: dictionary
| | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
+| |
| | ... | *Note:*
| | ... | Socket paths for Memif are defined in following format:
| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid}
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 routing with memif pairs on DUT node \
| | ... | \| ${dut} \| ${1} \|
-| | ...
+| |
| | [Arguments] | ${dut} | ${count}
-| | ...
+| |
| | ${dut_index}= | Get Index From List | ${duts} | ${dut}
| | ${last_dut_index}= | Evaluate | ${duts_count} - ${1}
-| | ...
+| |
| | ${tg_if1_net}= | Set Variable | 10.10.10.0
| | ${tg_if2_net}= | Set Variable | 20.20.20.0
-| | ...
+| |
| | ${fib_table_1}= | Set Variable | ${10}
| | Run Keyword If | ${fib_table_1} > ${0}
| | ... | Add Fib Table | ${nodes['${dut}']} | ${fib_table_1}
| | ... | ${ip_base_if1}.${ip_base_if1}.${ip_base_if1}
| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24
| | ... | vrf=${fib_table_1} | gateway=${ip_net_if1}.1
-| | ... | interface=${${dut}_if1} | multipath=${TRUE}
-| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if1}
+| | ... | interface=${${dut}_${int}1}[0] | multipath=${TRUE}
+| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_${int}1}[0]
| | ... | ${fib_table_1}
-| | VPP Interface Set IP Address | ${nodes['${dut}']} | ${${dut}_if1}
+| | VPP Interface Set IP Address | ${nodes['${dut}']} | ${${dut}_${int}1}[0]
| | ... | ${ip_net_if1}.2 | 30
| | ${prev_node}= | Run Keyword If | ${dut_index} == ${0}
| | ... | Set Variable | TG
| | ... | ELSE | Get From List | ${duts} | ${dut_index-${1}}
| | ${prev_if}= | Run Keyword If | ${dut_index} == ${0}
-| | ... | Set Variable | if1
-| | ... | ELSE | Set Variable | if2
+| | ... | Set Variable | pf1
+| | ... | ELSE | Set Variable | ${int}2
| | ${prev_if_mac}= | Get Interface MAC | ${nodes['${prev_node}']}
-| | ... | ${${prev_node}_${prev_if}}
+| | ... | ${${prev_node}_${prev_if}}[0]
| | VPP Add IP Neighbor
-| | ... | ${nodes['${dut}']} | ${${dut}_if1} | ${ip_net_if1}.1 | ${prev_if_mac}
-| | ...
+| | ... | ${nodes['${dut}']} | ${${dut}_${int}1}[0] | ${ip_net_if1}.1
+| | ... | ${prev_if_mac}
+| |
| | ${fib_table_2}= | Evaluate | ${fib_table_1} + ${count}
| | Add Fib Table | ${nodes['${dut}']} | ${fib_table_2}
| | ${ip_base_if2}= | Evaluate | ${ip_base_if1} + ${1}
| | ... | ${ip_base_if2}.${ip_base_if2}.${ip_base_if2}
| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24
| | ... | vrf=${fib_table_2} | gateway=${ip_net_if2}.2
-| | ... | interface=${${dut}_if2} | multipath=${TRUE}
-| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if2}
+| | ... | interface=${${dut}_${int}2}[0] | multipath=${TRUE}
+| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_${int}2}[0]
| | ... | ${fib_table_2}
-| | VPP Interface Set IP Address | ${nodes['${dut}']} | ${${dut}_if2}
+| | VPP Interface Set IP Address | ${nodes['${dut}']} | ${${dut}_${int}2}[0]
| | ... | ${ip_net_if2}.1 | 30
| | ${next_node}= | Run Keyword If | ${dut_index} == ${last_dut_index}
| | ... | Set Variable | TG
| | ... | ELSE | Get From List | ${duts} | ${dut_index+${1}}
| | ${next_if}= | Run Keyword If | ${dut_index} == ${last_dut_index}
-| | ... | Set Variable | if2
-| | ... | ELSE | Set Variable | if1
+| | ... | Set Variable | pf2
+| | ... | ELSE | Set Variable | ${int}1
| | ${next_if_mac}= | Get Interface MAC | ${nodes['${next_node}']}
-| | ... | ${${next_node}_${next_if}}
+| | ... | ${${next_node}_${next_if}}[0]
| | VPP Add IP Neighbor
-| | ... | ${nodes['${dut}']} | ${${dut}_if2} | ${ip_net_if2}.2 | ${next_if_mac}
-| | ...
+| | ... | ${nodes['${dut}']} | ${${dut}_${int}2}[0] | ${ip_net_if2}.2
+| | ... | ${next_if_mac}
+| |
| | ${fib_table_1}= | Evaluate | ${fib_table_1} - ${1}
| | ${ip_base_start}= | Set Variable | ${31}
-| | :FOR | ${number} | IN RANGE | 1 | ${count+${1}}
+| | FOR | ${number} | IN RANGE | 1 | ${count+${1}}
| | | ${sock1}= | Set Variable | memif-${dut}_CNF
| | | ${sock2}= | Set Variable | memif-${dut}_CNF
| | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
| | | ... | ${memif1} | ${ip_net_memif2}.1 | ${memif_if2_mac}
| | | VPP Add IP Neighbor | ${nodes['${dut}']}
| | | ... | ${memif2} | ${ip_net_memif1}.1 | ${memif_if1_mac}
+| | END
| Initialize IPv4 forwarding with vhost in 2-node circular topology
| | [Documentation]
| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix
| | ... | /8 and next hop of neighbour IPv4 address. Setup ARP on all VPP
| | ... | interfaces.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - nf_nodes - Number of guest VMs. Type: integer
| | ... | - testpmd_mac - Switch for testpmd_mac test configuration.
| | ... | Type: boolean
-| | ...
+| |
| | ... | *Note:*
| | ... | Socket paths for VM are defined in following format:
| | ... | - /var/run/vpp/sock-${VM_ID}-1
| | ... | - /var/run/vpp/sock-${VM_ID}-2
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| IPv4 forwarding with Vhost-User initialized in a 2-node circular\
| | ... | topology \| 1 \|
-| | ...
+| |
| | [Arguments] | ${nf_nodes}=${1} | ${testpmd_mac}=${FALSE}
-| | ...
+| |
| | Set interfaces in path up
| | ${fib_table_1}= | Set Variable | ${101}
| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes}
| | Add Fib Table | ${dut1} | ${fib_table_1}
| | Add Fib Table | ${dut1} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
+| | Assign Interface To Fib Table
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${fib_table_1}
+| | Assign Interface To Fib Table
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${fib_table_2}
| | VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 100.0.0.1 | 30
| | VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 200.0.0.1 | 30
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg_if2_mac}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 200.0.0.1 | 30
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 100.0.0.2 | ${TG_pf1_mac}[0]
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 200.0.0.2 | ${TG_pf2_mac}[0]
| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2
-| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
+| | ... | interface=${DUT1_${int}1}[0] | vrf=${fib_table_1}
| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=200.0.0.2
-| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
+| | ... | interface=${DUT1_${int}2}[0] | vrf=${fib_table_2}
+| | FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
| | | ${fib_table_1}= | Evaluate | ${100}+${number}
| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1}
| | | Configure vhost interfaces | ${dut1}
| | | Run Keyword If | ${testpmd_mac}
| | | ... | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.1.2
| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
+| | END
| Initialize IPv4 forwarding with vhost in 3-node circular topology
| | [Documentation]
| | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT
| | ... | nodes in all FIB tables with prefix /8 and next hop of neighbour IPv4
| | ... | address. Setup ARP on all VPP interfaces.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - nf_nodes - Number of guest VMs. Type: integer
-| | ...
+| |
| | ... | *Note:*
| | ... | Socket paths for VM are defined in following format:
| | ... | - /var/run/vpp/sock-\${VM_ID}-1
| | ... | - /var/run/vpp/sock-\${VM_ID}-2
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| IPv4 forwarding with Vhost-User initialized in a 3-node circular\
| | ... | topology \| 1 \|
-| | ...
+| |
| | [Arguments] | ${nf_nodes}=${1} | ${testpmd_mac}=${FALSE}
-| | ...
+| |
| | Set interfaces in path up
| | ${fib_table_1}= | Set Variable | ${101}
| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes}
| | Add Fib Table | ${dut1} | ${fib_table_2}
| | Add Fib Table | ${dut2} | ${fib_table_1}
| | Add Fib Table | ${dut2} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2}
+| | Assign Interface To Fib Table
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${fib_table_1}
+| | Assign Interface To Fib Table
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${fib_table_2}
+| | Assign Interface To Fib Table
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${fib_table_1}
+| | Assign Interface To Fib Table
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${fib_table_2}
| | VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 100.0.0.1 | 30
| | VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 150.0.0.1 | 30
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 150.0.0.1 | 30
| | VPP Interface Set IP Address
-| | ... | ${dut2} | ${dut2_if1} | 150.0.0.2 | 30
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | 150.0.0.2 | 30
| | VPP Interface Set IP Address
-| | ... | ${dut2} | ${dut2_if2} | 200.0.0.1 | 30
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 200.0.0.2 | ${tg_if2_mac}
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | 200.0.0.1 | 30
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 100.0.0.2 | ${TG_pf1_mac}[0]
+| | VPP Add IP Neighbor
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | 200.0.0.2 | ${TG_pf2_mac}[0]
| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2
-| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
+| | ... | interface=${DUT1_${int}1}[0] | vrf=${fib_table_1}
| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=150.0.0.2
-| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
+| | ... | interface=${DUT1_${int}2}[0] | vrf=${fib_table_2}
| | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=150.0.0.1
-| | ... | interface=${dut2_if1} | vrf=${fib_table_1}
+| | ... | interface=${DUT2_${int}1}[0] | vrf=${fib_table_1}
| | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=200.0.0.2
-| | ... | interface=${dut2_if2} | vrf=${fib_table_2}
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
+| | ... | interface=${DUT2_${int}2}[0] | vrf=${fib_table_2}
+| | FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
| | | ${fib_table_1}= | Evaluate | ${100}+${number}
| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1}
| | | Configure vhost interfaces | ${dut1}
| | | Run Keyword If | ${testpmd_mac}
| | | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=1.1.1.2
| | | ... | interface=${dut2-vhost-${number}-if2} | vrf=${fib_table_2}
+| | END
| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
| | [Documentation]
| | ... | with /30 prefix on VLAN and set routing on both DUT nodes with prefix
| | ... | /30. Set next hop of neighbour DUT interface IPv4 address. All
| | ... | interfaces are brought up.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - tg_if1_net - TG interface 1 IP subnet used by traffic generator.
| | ... | Type: integer
| | ... | Type: integer
| | ... | - subid - ID of the sub-interface to be created. Type: string
| | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
+| |
| | ... | _NOTE:_ This KW uses following test case variables:
| | ... | - dut1 - DUT1 node.
| | ... | - dut2 - DUT2 node.
| | ... | - dut1_if2 - DUT1 interface towards DUT2.
| | ... | - dut2_if1 - DUT2 interface towards DUT1.
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces\
| | ... | in circular topology \| 10.10.10.0 \| 20.20.20.0 \| 10 \| pop-1 \|
-| | ...
+| |
| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
| | Set interfaces in path up
-| | ...
+| |
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Initialize VLAN dot1q sub-interfaces in circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
+| | ... | ${dut1} | ${DUT1_${int}2}[0]
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | SUB_ID=${subid}
| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology
-| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | SUB_ID=${subid}
| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure L2 tag rewrite method on interfaces | ${dut1}
-| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
+| | ... | Configure L2 tag rewrite method on interfaces
+| | ... | ${dut1} | ${subif_index_1}
+| | ... | ${dut2} | ${subif_index_2} | TAG_REWRITE_METHOD=${tag_rewrite}
| | ... | ELSE | Configure L2 tag rewrite method on interfaces
| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | ...
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg_if1_mac}
+| |
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 1.1.1.1 | ${TG_pf1_mac}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${subif_index_1} | 2.2.2.2 | ${dut2_if1_mac}
+| | ... | ${dut1} | ${subif_index_1} | 2.2.2.2 | ${DUT2_${int}1_mac}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${subif_index_2} | 2.2.2.1 | ${dut1_if2_mac}
+| | ... | ${dut2} | ${subif_index_2} | 2.2.2.1 | ${DUT1_${int}2_mac}[0]
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2}
| | ... | ELSE | Set Variable | ${dut1}
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2_if2}
| | ... | ELSE | Set Variable | ${subif_index_1}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg_if2_mac}
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30
+| | VPP Add IP Neighbor
+| | ... | ${dut} | ${dut_if2} | 3.3.3.1 | ${TG_pf2_mac}[0]
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 1.1.1.2 | 30
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1}
| | ... | 2.2.2.1 | 30
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2}
| | ... | 2.2.2.2 | 30
-| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 3.3.3.2 | 30
+| | VPP Interface Set IP Address
+| | ... | ${dut} | ${dut_if2} | 3.3.3.2 | 30
| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | gateway=1.1.1.1
-| | ... | interface=${dut1_if1}
+| | ... | interface=${DUT1_${int}1}[0]
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | gateway=2.2.2.2
| | ... | interface=${subif_index_1}