| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Show statistics on all DUTs
-| ... | Remove startup configuration of VPP from all DUTs
+| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
| Documentation | *Throughput search suite (based on RFC2544).*
| ...
| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
| ... | of the TG node.
*** Test Cases ***
-| Find NDR by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
+| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput with non drop rate for 78B frames by using
-| | ... | linear search starting at 5.0Mpps, stepping down with step of 0.1Mpps
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ... | binary search with threshold 0.1Mpps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 5000000
-| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 12755102
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
-| Find NDR by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
+| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 78B frames by using
+| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
+| | ... | percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | linear search starting at 812,743pps, stepping down with step of
-| | ... | 10,000pps
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ... | binary search with threshold 10,000pps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 1518B frames by using
+| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
+| | ... | percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
-| | ${start_rate}= | Set Variable | 812743
-| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | 812743
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
+| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | linear search starting at 138,580pps, stepping down with step of
-| | ... | 5,000pps
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ... | binary search with threshold 5,000pps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 9000B frames by using
+| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
+| | ... | 0.5 percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
-| | ${start_rate}= | Set Variable | 138580
-| | ${step_rate}= | Set Variable | 5000
| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | 138580
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
-| | ... | linear search starting at 9Mpps, stepping down with step of 0.1Mpps
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ... | binary search with threshold 0.1Mpps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by
+| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 9000000
-| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 12755102
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using linear search starting at 812,743pps, stepping down with step
-| | ... | of 10.000pps
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ... | using binary search with threshold 10,000pps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
+| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
-| | ${start_rate}= | Set Variable | 812743
-| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | 812743
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using linear search starting at 138,580pps, stepping down with step
-| | ... | of 5,000pps
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ... | using binary search with threshold 5,000pps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
-| | ${start_rate}= | Set Variable | 138580
-| | ${step_rate}= | Set Variable | 5000
| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | 138580
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
-| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
+| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 78B
-| | ... | frames by using linear search starting at 12.2Mpps, stepping down with
-| | ... | step of 0.1Mpps
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ... | frames by using binary search with threshold 0.1Mpps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 78B
+| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
+| | ... | is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 12200000
-| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 12755102
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
+| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B
-| | ... | frames by using linear search starting at 812,743pps, stepping down
-| | ... | with step of 10.000pps
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ... | frames by using binary search with threshold 10,000pps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
-| | ${start_rate}= | Set Variable | 812743
-| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | 812743
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
-| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
+| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
-| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B
-| | ... | frames by using linear search starting at 138,580pps, stepping down
-| | ... | with step of 5,000pps
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${start_rate}= | Set Variable | 138580
-| | ${step_rate}= | Set Variable | 5000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | 138580
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B
+| | ... | frames by using binary search with threshold 10,000pps. Loss
+| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 78B
-| | ... | frames by using binary search with threshold 5,000pps
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 78
-| | ${binary_min}= | Set Variable | 5000000
-| | ${binary_max}= | Set Variable | 12000000
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 12755102
-| | ${threshold}= | Set Variable | 5000
-| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B
+| | ... | frames by using linear search starting at 138,580pps, stepping down
+| | ... | with step of 5,000pps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
-| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
-| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| Find PDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
-| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 78B
-| | ... | frames by using binary search with threshold 5,000pps
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 78
-| | ${binary_min}= | Set Variable | 6000000
-| | ${binary_max}= | Set Variable | 12000000
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 12755102
-| | ${threshold}= | Set Variable | 5000
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B
+| | ... | frames by using binary search with threshold 5,000pps. Loss
+| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
| | And Add all PCI devices to all DUTs
-| | And Add No Multi Seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}