+Supported NICs
+--------------
+
+* Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+* Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+* Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+* Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+* Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 40G MCX413A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT (1x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX413A-GCAT (1x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX416A-BCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX416A-GCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+* Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+* Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+* Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+Known issues
+------------
+
+* **Flow pattern without any specific vlan will match for vlan packets as well.**
+
+ When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card.
+ Meaning, the flow rule::
+
+ flow create 0 ingress pattern eth / vlan vid is 3 / ipv4 / end ...
+
+ Will only match vlan packets with vid=3. and the flow rules::
+
+ flow create 0 ingress pattern eth / ipv4 / end ...
+
+ Or::
+
+ flow create 0 ingress pattern eth / vlan / ipv4 / end ...
+
+ Will match any ipv4 packet (VLAN included).
+