CSIT-1342: Edit the static content for CSIT-1810 report

[csit.git] / docs / report / introduction / methodology.rst

diff --git a/docs/report/introduction/methodology.rst b/docs/report/introduction/methodology.rst
index ff5714c..89db393 100644 (file)
--- a/docs/report/introduction/methodology.rst
+++ b/docs/report/introduction/methodology.rst
@@ -1,3 +1,6 @@
+
+.. _performance_test_methodology:
+

 Performance Test Methodology
 ============================
 
 Performance Test Methodology
 ============================
 


@@ -12,15 +15,14 @@ different Packet Loss Ratio (PLR) values.
 Following MLRsearch values are measured across a range of L2 frame sizes
 and reported:
 
 Following MLRsearch values are measured across a range of L2 frame sizes
 and reported:
 

-- **Non Drop Rate (NDR)**: packet and bandwidth throughput at PLR=0%.
+- NON DROP RATE (NDR): packet and bandwidth throughput at PLR=0%.

 
   - **Aggregate packet rate**: NDR_LOWER <bi-directional packet rate>
     pps.
   - **Aggregate bandwidth rate**: NDR_LOWER <bi-directional bandwidth
     rate> Gbps.
 
 
   - **Aggregate packet rate**: NDR_LOWER <bi-directional packet rate>
     pps.
   - **Aggregate bandwidth rate**: NDR_LOWER <bi-directional bandwidth
     rate> Gbps.
 

-- **Partial Drop Rate (PDR)**: packet and bandwidth throughput at
-  PLR=0.5%.
+- PARTIAL DROP RATE (PDR): packet and bandwidth throughput at PLR=0.5%.

 
   - **Aggregate packet rate**: PDR_LOWER <bi-directional packet rate>
     pps.
 
   - **Aggregate packet rate**: PDR_LOWER <bi-directional packet rate>
     pps.


@@ -164,7 +166,7 @@ Input Parameters
    Default (2). (Value chosen based on limited experimentation to date.
    More experimentation needed to arrive to clearer guidelines.)
 
    Default (2). (Value chosen based on limited experimentation to date.
    More experimentation needed to arrive to clearer guidelines.)
 

-Initial phase
+Initial Phase

 `````````````
 
 1. First trial measures at maximum rate and discovers MRR.
 `````````````
 
 1. First trial measures at maximum rate and discovers MRR.


@@ -190,7 +192,7 @@ Initial phase
    c. *do*: single trial.
    d. *out*: measured loss ratio.
 
    c. *do*: single trial.
    d. *out*: measured loss ratio.
 

-Non-initial phases
+Non-initial Phases

 ``````````````````
 
 1. Main loop:
 ``````````````````
 
 1. Main loop:


@@ -629,7 +631,7 @@ created (one for each direction) with TRex flow_stats parameter set to
 STLFlowLatencyStats. In that case, returned statistics will also include
 min/avg/max latency values.
 
 STLFlowLatencyStats. In that case, returned statistics will also include
 min/avg/max latency values.
 

-HTTP/TCP with WRK tool
+HTTP/TCP with WRK Tool

 ----------------------
 
 `WRK HTTP benchmarking tool <https://github.com/wg/wrk>`_ is used for
 ----------------------
 
 `WRK HTTP benchmarking tool <https://github.com/wg/wrk>`_ is used for