Report: Configure report

[csit.git] / docs / report / introduction / physical_testbeds.rst

diff --git a/docs/report/introduction/physical_testbeds.rst b/docs/report/introduction/physical_testbeds.rst
index 1c6bc1c..5f62f1b 100644 (file)
--- a/docs/report/introduction/physical_testbeds.rst
+++ b/docs/report/introduction/physical_testbeds.rst
@@ -227,54 +227,6 @@ All Intel Xeon Skylake servers run with Intel Hyper-Threading enabled,
 doubling the number of logical cores exposed to Linux, with 56 logical
 cores and 28 physical cores per processor socket.
 
 doubling the number of logical cores exposed to Linux, with 56 logical
 cores and 28 physical cores per processor socket.
 

-3-Node Xeon Haswell (3n-hsw)
-----------------------------
-
-Three 3n-hsw testbeds are in operation in FD.io labs. Each 3n-hsw
-testbed is built with three Cisco UCS-c240m3 servers, each in turn
-equipped with two Intel Xeon Haswell-SP E5-2699v3 processors (45 MB
-Cache, 2.3 GHz, 18 cores). 3n-hsw physical topology is shown below.
-
-.. only:: latex
-
-    .. raw:: latex
-
-        \begin{figure}[H]
-            \centering
-                \graphicspath{{../_tmp/src/introduction/}}
-                \includegraphics[width=0.90\textwidth]{testbed-3n-hsw}
-                \label{fig:testbed-3n-hsw}
-        \end{figure}
-
-.. only:: html
-
-    .. figure:: testbed-3n-hsw.svg
-        :alt: testbed-3n-hsw
-        :align: center
-
-SUT1 and SUT2 servers are populated with the following NIC models:
-
-#. NIC-1: VIC 1385 2p40GE Cisco.
-#. NIC-2: NIC x520 2p10GE Intel.
-#. NIC-3: empty.
-#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-5: NIC x710-DA2 2p10GE Intel.
-#. NIC-6: QAT 8950 50G (Walnut Hill) Intel.
-
-TG servers run T-Rex application and are populated with the following
-NIC models:
-
-#. NIC-1: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-2: NIC x710-DA2 2p10GE Intel.
-#. NIC-3: empty.
-#. NIC-4: NIC xl710-QDA2 2p40GE Intel.
-#. NIC-5: NIC x710-DA2 2p10GE Intel.
-#. NIC-6: NIC x710-DA2 2p10GE Intel. (For self-tests.)
-
-All Intel Xeon Haswell servers run with Intel Hyper-Threading disabled,
-making the number of logical cores exposed to Linux match the number of
-18 physical cores per processor socket.
-

 2-Node Atom Denverton (2n-dnv)
 ------------------------------
 
 2-Node Atom Denverton (2n-dnv)
 ------------------------------
 


@@ -386,8 +338,45 @@ SUT1 and SUT2 servers are populated with the following NIC models:
 #. NIC-1: connectx4 2p25GE Mellanox.
 #. NIC-2: x520 2p10GE Intel.
 
 #. NIC-1: connectx4 2p25GE Mellanox.
 #. NIC-2: x520 2p10GE Intel.
 

-TG servers run T-Rex application and are populated with the following
+TG server runs T-Rex application and is populated with the following

 NIC models:
 
 #. NIC-1: x710-DA4 4p10GE Intel.
 #. NIC-2: xxv710-DA2 2p25GE Intel.
 NIC models:
 
 #. NIC-1: x710-DA4 4p10GE Intel.
 #. NIC-2: xxv710-DA2 2p25GE Intel.

+#. NIC-3: xl710-QDA2 2p40GE Intel.
+
+2-Node ARM ThunderX2 (2n-tx2)
+---------------------------
+
+One 2n-tx2 testbed is built with: i) one SuperMicro SYS-7049GP-TRT
+server acting as TG and equipped with two Intel Xeon Skylake Platinum
+8180 processors (38.5 MB Cache, 2.50 GHz, 28 cores), and ii) one Marvell
+ThnderX2 9975 (28* ThunderX2) server acting as SUT and equipped with two
+ThunderX2 ARMv8 CN9975 processors. 2n-tx2 physical topology is shown below.
+
+.. only:: latex
+
+    .. raw:: latex
+
+        \begin{figure}[H]
+            \centering
+                \graphicspath{{../_tmp/src/introduction/}}
+                \includegraphics[width=0.90\textwidth]{testbed-2n-tx2}
+                \label{fig:testbed-2n-tx2}
+        \end{figure}
+
+.. only:: html
+
+    .. figure:: testbed-2n-tx2.svg
+        :alt: testbed-2n-tx2
+        :align: center
+
+SUT server is populated with the following NIC models:
+
+#. NIC-1: xl710-QDA2 2p40GE Intel (not connected).
+#. NIC-2: xl710-QDA2 2p40GE Intel.
+
+TG server run T-Rex application and is populated with the following
+NIC models:
+
+#. NIC-1: xl710-QDA2 2p40GE Intel.