-#. **VPP performance tests**
-
- - *MRR tests* - Maximum Receive Rate tests measure the packet forwarding rate
- under the maximum load offered by traffic generator over a set trial
- duration, regardless of packet loss. MRR tests are used for continuous
- performance trending and for comparison between releases.
-
- - *MLR tests* - NDR and PDR tests measure the packet forwarding rate using
- MLRsearch library by traffic generator. All tests that previously used
- binary search were converted to MLRsearch.
-
- - *L2patch tests* - Tests measure performance of L2patch, cross linking
- RX and TX of two physical interfaces.
-
- - *2-node tests* - Baseline set of 2-node tests covering base ip4, ip4,
- l2patch, l2bd, l2xc.
-
- - *Generated tests* - Simplified and unified test structure,
- semi-autogenerated by generator script. Test generator is currently able
- to create test combinations with various frame size and cores combinations.
- All existing test cases were converted to new format.
-
- - *Simultaneous multithreading* - SMT-aware automatic detection and
- resource configuration including thread affinity, number of rx queues and
- DPDK I/O mbufs. Tests are automatically tagged during execution indicating
- configuration.
-
- - *Intel Skylake* - Topologies consisting of 2-node and 3-node using
- SuperMirco servers each equipped with two Intel Xeon Skylake Platinum
- processors.
-
-#. **Presentation and Analytics Layer**
-
- - *Performance trending* - Added continuous performance trending and
- analysis. New Performance Trending and Performance Analysis jobs
- executed regular throughput tests, with results being subsequently
- analysed and trend and anomalies summarized and presented in VPP
- Performance Dashboard and trendline graphs.
-
-#. **Test Framework Optimizations**
-
- - *Performance tests efficiency* - Qemu build/install optimizations,
- warmup phase handling, vpp restart handling. Resulted in improved
- stability and reduced total execution time by 30% for single pkt
- size e.g. 64B/78B.
-
- - *General code housekeeping* - ongoing RF keywords optimizations,
- removal of redundant RF keywords.
-
-Performance Changes
--------------------
-
-Relative performance changes in measured packet throughput in |csit-release|
-are calculated against the results from |csit-release-1|
-report. Listed mean and standard deviation values are computed based on
-a series of the same tests executed against respective VPP releases to
-verify test results repeatability, with percentage change calculated for
-mean values. Note that the standard deviation is quite high for a small
-number of packet throughput tests, what indicates poor test results
-repeatability and makes the relative change of mean throughput value not
-fully representative for these tests. The root causes behind poor
-results repeatability vary between the test cases.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-PDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-MRR Changes
-~~~~~~~~~~~
-
-MRR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
- - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
-
-.. note::