-#. **VPP performance tests**
-
- - *MRR tests* - New Maximum Receive Rate tests measure the packet
- forwarding rate under the maximum load offered by traffic
- generator over a set trial duration, regardless of packet loss.
- MRR tests are used for continuous performance trending and for
- comparison between releases.
-
- - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
- tests measure performance of SRv6 Endpoint fronting SR-unaware
- appliance via masquerading (End.AM), dynamic proxy (End.AD) or
- static proxy (End.AS) SR functions.
-
-#. **Presentation and Analytics Layer**
-
- - *Performance trending* - Added continuous performance trending and
- analysis. New Performance Trending and Performance Analysis jobs
- executed regular throughput tests, with results being subsequently
- analysed and trend and anomalies summarized and presented in VPP
- Performance Dashboard and trendline graphs.
-
-#. **Test Framework Optimizations**
-
- - *Performance tests efficiency* - Qemu build/install optimizations,
- warmup phase handling, vpp restart handling. Resulted in improved
- stability and reduced total execution time by 30% for single pkt
- size e.g. 64B/78B.
-
- - *General code housekeeping* - ongoing RF keywords optimizations,
- removal of redundant RF keywords.
-
-Performance Changes
--------------------
-
-Relative performance changes in measured packet throughput in |csit-release|
-are calculated against the results from |csit-release-1|
-report. Listed mean and standard deviation values are computed based on
-a series of the same tests executed against respective VPP releases to
-verify test results repeatability, with percentage change calculated for
-mean values. Note that the standard deviation is quite high for a small
-number of packet throughput tests, what indicates poor test results
-repeatability and makes the relative change of mean throughput value not
-fully representative for these tests. The root causes behind poor
-results repeatability vary between the test cases.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-PDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-MRR Changes
-~~~~~~~~~~~
-
-MRR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
- - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
-
-.. note::