-#. **VPP performance tests**
-
- - *MRR tests* - Maximum Receive Rate tests measure the packet forwarding rate
- under the maximum load offered by traffic generator over a set trial
- duration, regardless of packet loss. MRR tests are used for continuous
- performance trending and for comparison between releases.
-
- - *MLR tests* - NDR and PDR tests measure the packet forwarding rate using
- MLRsearch library by traffic generator. All tests that previously used
- binary search were converted to MLRsearch.
-
- - *L2patch tests* - Tests measure performance of L2patch, cross linking
- RX and TX of two physical interfaces.
-
- - *2-node tests* - Baseline set of 2-node tests covering base ip4, ip4,
- l2patch, l2bd, l2xc.
-
- - *Generated tests* - Simplified and unified test structure,
- semi-autogenerated by generator script. Test generator is currently able
- to create test combinations with various frame size and cores combinations.
- All existing test cases were converted to new format.
-
- - *Simultaneous multithreading* - SMT-aware automatic detection and
- resource configuration including thread affinity, number of rx queues and
- DPDK I/O mbufs. Tests are automatically tagged during execution indicating
- configuration.
-
- - *Intel Skylake* - Topologies consisting of 2-node and 3-node using
- SuperMirco servers each equipped with two Intel Xeon Skylake Platinum
- processors.
-
-#. **Presentation and Analytics Layer**
-
- - *Performance trending* - Added continuous performance trending and
- analysis. New Performance Trending and Performance Analysis jobs
- executed regular throughput tests, with results being subsequently
- analysed and trend and anomalies summarized and presented in VPP
- Performance Dashboard and trendline graphs.
-
-#. **Test Framework Optimizations**
-
- - *Performance tests efficiency* - Qemu build/install optimizations,
- warmup phase handling, vpp restart handling. Resulted in improved
- stability and reduced total execution time by 30% for single pkt
- size e.g. 64B/78B.
-
- - *General code housekeeping* - ongoing RF keywords optimizations,
- removal of redundant RF keywords.
-
-Performance Changes
--------------------
-
-Relative performance changes in measured packet throughput in |csit-release|
-are calculated against the results from |csit-release-1|
-report. Listed mean and standard deviation values are computed based on
-a series of the same tests executed against respective VPP releases to
-verify test results repeatability, with percentage change calculated for
-mean values. Note that the standard deviation is quite high for a small
-number of packet throughput tests, what indicates poor test results
-repeatability and makes the relative change of mean throughput value not
-fully representative for these tests. The root causes behind poor
-results repeatability vary between the test cases.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-PDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-MRR Changes
-~~~~~~~~~~~
-
-MRR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
- - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-Comparison Across Testbeds
---------------------------
-
-Relative performance changes in measured packet throughputon 3-Node Skx testbed
-are calculated against the results measured on 3-Node Hsw testbed.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR changes between testbeds are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.csv>`_,
- - `pretty ASCII format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-skx`_
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-PDR throughput changes between testbeds are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.csv>`_,
- - `pretty ASCII format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-skx`_
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-MRR Changes
-~~~~~~~~~~~
-
-MRR throughput changes between testbeds are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for mrr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-mrr.csv>`_,
- - `pretty ASCII format for mrr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-mrr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-skx`_
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-Throughput Trending
--------------------
-
-In addition to reporting throughput changes between VPP releases, CSIT
-provides continuous performance trending for VPP master branch:
-
-#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_
- - per VPP test case throughput trend, trend compliance and summary of
- detected anomalies.
-
-#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_
- - throughput test metrics, trend calculations and anomaly
- classification (progression, regression, outlier).
-
-#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_
- - per VPP build MRR throughput measurements against the trendline
- with anomaly highlights, with associated CSIT test jobs.
+#. VPP PERFORMANCE TESTS
+
+ - **Intel Xeon 2n-skx, 3n-skx testbeds**: VPP performance test data
+ is now included in this report version. Due to substantial impact
+ of test environment changes (applied during the CSIT-2001
+ development cycle) on the performance of VPP software, a new
+ approach to performance comparison and progression/regression
+ root cause analysis (RCA) has been applied.
+
+ - CSIT test environment is now versioned, with ver. 1 associated
+ with CSIT rls1908 git branch as of 2019-08-21, and ver. 2
+ associated with CSIT rls2001 git branch as of 2020-03-27.
+
+ - To identify performance changes due to CSIT test environment
+ changes from ver. 1 to ver. 2, VPP v19.08.1 has been re-tested in
+ ver. 2 and compared against the past results obtained with
+ testing in ver. 1. Separate RCA1 analysis has been applied to
+ this part. See :ref:`vpp_compare_current_vs_previous_release` and
+ :ref:`vpp_known_issues`.
+
+ - To identify performance changes due to VPP code changes from
+ v19.08.1 to v20.01.0, both have been tested in CSIT environment
+ ver. 2 and compared against each other. Separate RCA2 analysis
+ has been applied to this part. See
+ :ref:`vpp_compare_current_vs_previous_release` and
+ :ref:`vpp_known_issues`.
+
+ - **Intel Xeon 2n-clx testbeds**: VPP performance test data is now
+ included in this report. See :ref:`vpp_known_issues`.
+
+ - **Service density 2n-skx tests**: Added new NF density tests with
+ IPsec encryption between DUTs.
+
+ - **AVF tests**: Full test coveraged based on code changes in CSIT
+ core layer (driver/interface awareness) and generated by suite
+ generator (Intel Fortville NICs only).
+
+ - **Hoststack tests**: Major refactor of VPP Hoststack TCP/IP
+ performance tests using WRK generator talking to the VPP HTTP
+ static server plugin measuring connections per second and
+ requests per second. Added new iperf3 with LDPreload tests,
+ iperf3/LDPreload tests with packet loss induced via the VPP NSIM
+ (Network Simulator) plugin, and QUIC/UDP/IP transport tests.
+ All of the new tests measure goodput through the VPP Hoststack
+ from client to server.
+
+ - **Latency HDRHistogram**: Added High Dynamic Range Histogram
+ latency measurements based on the new capability in TRex traffic
+ generator. HDRH latency data presented in latency packet
+ percentile graphs and in detailed results tables.
+
+ - **Mellanox CX556A-EDAT tests**: Added tests with Mellanox
+ ConnectX5-2p100GE NICs in 2n-clx testbeds using VPP native rdma
+ driver.
+
+ - **IPsec reconfiguration tests**: Added tests measuring the impact
+ of IPsec tunnels creations and removals.
+
+ - **Load Balancer tests**: Added VPP performance tests for Maglev,
+ L3DSR (Direct Server Return), Layer 4 Load Balancing NAT Mode.
+
+#. TEST FRAMEWORK
+
+ - **CSIT Python3 support**: Full migration of CSIT from Python2.7 to
+ Python3.6. This change includes library migration, PIP dependency
+ upgrade, CSIT container images, infrastructure packages
+ ugrade/installation.
+
+ - **CSIT PAPI support**: Finished conversion of CSIT VAT L1 keywords
+ to PAPI L1 KWs in CSIT using VPP Python bindings (VPP PAPI).
+ Redesign of key components of PAPI Socket Executor and PAPI
+ history. Due to issues with PAPI performance, VAT is still used
+ in CSIT for all VPP scale tests. See known issues below.
+
+ - **Test Suite Generator**: Added capability to generate suites for
+ different drivers per NIC model including DPDK, AVF, RDMA.
+ Extended coverage for all tests.
+
+ - **General Code Housekeeping**: Ongoing RF keywords optimizations,
+ removal of redundant RF keywords and aligning of suite/test
+ setup/teardowns.
+
+#. TEST ENVIRONMENT
+
+ - **TRex Fortville NIC Performance**: Received FVL fix from Intel
+ resolving TRex low throughput issue. TRex per FVL NIC throughput
+ increased from ~27 Mpps to the nominal ~37 Mpps. For detail see
+ `CSIT-1503 <https://jira.fd.io/browse/CSIT-1503>`_ and `TRex-519
+ <https://trex-tgn.cisco.com/youtrack/issue/trex-519>`_].
+
+ - **New Intel Xeon Cascadelake Testbeds**: Added performance tests
+ for 2-Node-Cascadelake (2n-clx) testbeds with x710, xxv710 and
+ cx556a-edat NIC cards.
+
+#. PRESENTATION AND ANALYTICS LAYER
+
+ - **Graphs layout improvements**: Improved performance graphs layout
+ for better readibility and maintenance: test grouping, axis
+ labels, descriptions, other informative decoration.
+
+ - **Latency graphs**: Min/Avg/Max group bar latency graphs are
+ replaced with packet latency percentile distributon at different
+ background packet loads based on TRex latency hdrhistogram
+ measurements.
+
+..
+ // Alternative Note for 1st Bullet when bad microcode Skx, Clx results are published
+ - **Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds**: VPP performance
+ test data is included in this report version, but it shows lower
+ performance and behaviour inconsistency of these systems
+ following the upgrade of processor microcode packages (skx ucode
+ 0x2000064, clx ucode 0x500002c) as part of updating Ubuntu 18.04
+ LTS kernel version. Tested VPP and DPDK applications (L3fwd) are
+ affected. Skx and Clx test data will be corrected in subsequent
+ maintenance report version(s) once the issue is resolved. See
+ :ref:`vpp_known_issues`.
+
+.. raw:: latex
+
+ \clearpage
+
+.. _vpp_known_issues: