-NDR Throughput
-~~~~~~~~~~~~~~
-
-VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below.
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc}
- \label{fig:64B-1t1c-l2-sel1-ndrdisc}
- \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-*Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc}
- \label{fig:64B-1t1c-l2-sel2-ndrdisc}
- \end{figure}
-
-*Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-
-VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below.
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc}
- \label{fig:64B-2t2c-l2-sel1-ndrdisc}
- \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-*Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc}
- \label{fig:64B-2t2c-l2-sel2-ndrdisc}
- \end{figure}
-
-*Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-
-
-PDR Throughput
-~~~~~~~~~~~~~~
-
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc}
- \label{fig:64B-1t1c-l2-sel1-pdrdisc}
- \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" tests/vpp/perf/l2/*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-*Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc}
- \label{fig:64B-1t1c-l2-sel2-pdrdisc}
- \end{figure}
-
-*Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
-
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: htmlhttps://zoom.us/j/5695787389
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc}
- \label{fig:64B-2t2c-l2-sel1-pdrdisc}
- \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" tests/vpp/perf/l2/*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-*Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-.. raw:: html
-
- <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc}
- \label{fig:64B-2t2c-l2-sel2-pdrdisc}
- \end{figure}
-
-*Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *