+ struct priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = dev_flow->flow;
+ const int mark = !!(flow->actions &
+ (MLX5_FLOW_ACTION_FLAG | MLX5_FLOW_ACTION_MARK));
+ const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int i;
+
+ assert(dev->data->dev_started);
+ for (i = 0; i != flow->rss.queue_num; ++i) {
+ int idx = (*flow->queue)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+
+ if (mark) {
+ rxq_ctrl->flow_mark_n--;
+ rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
+ }
+ if (tunnel) {
+ unsigned int j;
+
+ /* Decrease the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel &
+ dev_flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]--;
+ break;
+ }
+ }
+ flow_rxq_tunnel_ptype_update(rxq_ctrl);
+ }
+ }
+}
+
+/**
+ * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
+ * @p flow if no other flow uses it with the same kind of request.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to the flow.
+ */
+static void
+flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct mlx5_flow *dev_flow;
+
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next)
+ flow_drv_rxq_flags_trim(dev, dev_flow);
+}
+
+/**
+ * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+flow_rxq_flags_clear(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ for (i = 0; i != priv->rxqs_n; ++i) {
+ struct mlx5_rxq_ctrl *rxq_ctrl;
+ unsigned int j;
+
+ if (!(*priv->rxqs)[i])
+ continue;
+ rxq_ctrl = container_of((*priv->rxqs)[i],
+ struct mlx5_rxq_ctrl, rxq);
+ rxq_ctrl->flow_mark_n = 0;
+ rxq_ctrl->rxq.mark = 0;
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
+ rxq_ctrl->flow_tunnels_n[j] = 0;
+ rxq_ctrl->rxq.tunnel = 0;
+ }
+}
+
+/*
+ * Validate the flag action.
+ *
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_flag(uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't mark and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 flag"
+ " actions in same flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "flag action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the mark action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_mark *mark = action->conf;
+
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "configuration cannot be null");
+ if (mark->id >= MLX5_FLOW_MARK_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id must in 0 <= id < "
+ RTE_STR(MLX5_FLOW_MARK_MAX));
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't flag and mark in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 mark actions in same"
+ " flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "mark action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the drop action.
+ *
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_drop(uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "drop action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the queue action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_queue *queue = action->conf;
+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (queue->index >= priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue index out of range");
+ if (!(*priv->rxqs)[queue->index])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue is not configured");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "queue action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the rss action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_rss *rss = action->conf;
+ unsigned int i;
+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions"
+ " in same flow");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ /* allow RSS key_len 0 in case of NULL (default) RSS key. */
+ if (rss->key_len == 0 && rss->key != NULL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key length 0");
+ if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue is not configured");
+ }
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "rss action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the count action.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "count action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL, "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL, "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL, "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ return 0;
+}
+
+/**
+ * Validate Ethernet item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *mask = item->mask;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };
+ int ret;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+
+ if (item_flags & ethm)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L2 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_eth_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_eth),
+ error);
+ return ret;
+}
+
+/**
+ * Validate VLAN item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ .inner_type = RTE_BE16(0xffff),
+ };
+ uint16_t vlan_tag = 0;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+ const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ MLX5_FLOW_LAYER_INNER_L4) :
+ (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4);
+ const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+
+ if (item_flags & vlanm)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple VLAN layers not supported");
+ else if ((item_flags & l34m) != 0)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan),
+ error);
+ if (ret)
+ return ret;
+ if (spec) {
+ vlan_tag = spec->tci;
+ vlan_tag &= mask->tci;
+ }
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!vlan_tag)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
+ return 0;
+}
+
+/**
+ * Validate IPV4 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),