- "id": "8c7fa4839d8fc8226429af90d58f57181bff6e0ae5a4be5605d309029c99348a",
- "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01LPL8KM0F/KAd80wc9vS8CPMtrNtmQqCfT'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01L7PQK9S8/vJTSCr3OUprfAEGKBV5uZoJ6'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-${version}.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: '${slack_default_receiver}'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: ${slack_jenkins_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_jenkins_receiver}'\n\n - match_re:\n service: .*\n receiver: ${slack_default_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_default_receiver}'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: '${slack_jenkins_receiver}'\n slack_configs:\n - api_url: '/${slack_jenkins_api_key}'\n channel: '#${slack_jenkins_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: '${slack_default_receiver}'\n slack_configs:\n - api_url: '/${slack_default_api_key}'\n channel: '#${slack_default_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
+ "id": "7e96dc4e316a25b07430e5ffc2ecdb94ae41f06770ba8667ae4d5f77ef25c6f7",
+ "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01U1NV9HV3/hKZXJJ74g2JcISq4K3QC1eG9'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01UUK23B6C/hZTcCu42FUv8d6rtirHtcYIi'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-${version}.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: '${slack_default_receiver}'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: ${slack_jenkins_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_jenkins_receiver}'\n\n - match_re:\n service: .*\n receiver: ${slack_default_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_default_receiver}'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: '${slack_jenkins_receiver}'\n slack_configs:\n - api_url: '${slack_jenkins_api_key}'\n channel: '#${slack_jenkins_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: '${slack_default_receiver}'\n slack_configs:\n - api_url: '${slack_default_api_key}'\n channel: '#${slack_default_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",