Fix warnings reported by gen_doc.sh
[csit.git] / resources / libraries / python / honeycomb / HoneycombSetup.py
index 53130f4..8ca3403 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,6 +13,9 @@
 
 """Implementation of keywords for Honeycomb setup."""
 
 
 """Implementation of keywords for Honeycomb setup."""
 
+from json import loads
+from time import time, sleep
+
 from ipaddress import IPv6Address, AddressValueError
 
 from robot.api import logger
 from ipaddress import IPv6Address, AddressValueError
 
 from robot.api import logger
@@ -25,7 +28,6 @@ from resources.libraries.python.honeycomb.HoneycombUtil \
     import HoneycombUtil as HcUtil
 from resources.libraries.python.ssh import SSH
 from resources.libraries.python.topology import NodeType
     import HoneycombUtil as HcUtil
 from resources.libraries.python.ssh import SSH
 from resources.libraries.python.topology import NodeType
-from resources.libraries.python.DUTSetup import DUTSetup
 
 
 class HoneycombSetup(object):
 
 
 class HoneycombSetup(object):
@@ -52,6 +54,7 @@ class HoneycombSetup(object):
         Honeycomb is up and running.
         Honeycomb must be installed in "/opt" directory, otherwise the start
         will fail.
         Honeycomb is up and running.
         Honeycomb must be installed in "/opt" directory, otherwise the start
         will fail.
+
         :param nodes: List of nodes to start Honeycomb on.
         :type nodes: list
         :raises HoneycombError: If Honeycomb fails to start.
         :param nodes: List of nodes to start Honeycomb on.
         :type nodes: list
         :raises HoneycombError: If Honeycomb fails to start.
@@ -59,12 +62,13 @@ class HoneycombSetup(object):
 
         HoneycombSetup.print_environment(nodes)
 
 
         HoneycombSetup.print_environment(nodes)
 
-        logger.console("\n(re)Starting Honeycomb service ...")
-
         cmd = "sudo service honeycomb start"
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
         cmd = "sudo service honeycomb start"
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
+                logger.console(
+                    "\n(re)Starting Honeycomb service on node {0}".format(
+                        node["host"]))
                 ssh = SSH()
                 ssh.connect(node)
                 (ret_code, _, _) = ssh.exec_command_sudo(cmd)
                 ssh = SSH()
                 ssh.connect(node)
                 (ret_code, _, _) = ssh.exec_command_sudo(cmd)
@@ -83,17 +87,20 @@ class HoneycombSetup(object):
         stops the Honeycomb and does not check its shutdown state. Use the
         keyword "Check Honeycomb Shutdown State" to check if Honeycomb has
         stopped.
         stops the Honeycomb and does not check its shutdown state. Use the
         keyword "Check Honeycomb Shutdown State" to check if Honeycomb has
         stopped.
+
         :param nodes: List of nodes to stop Honeycomb on.
         :type nodes: list
         :raises HoneycombError: If Honeycomb failed to stop.
         """
         :param nodes: List of nodes to stop Honeycomb on.
         :type nodes: list
         :raises HoneycombError: If Honeycomb failed to stop.
         """
-        logger.console("\nShutting down Honeycomb service ...")
 
         cmd = "sudo service honeycomb stop"
         errors = []
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
 
         cmd = "sudo service honeycomb stop"
         errors = []
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
+                logger.console(
+                    "\nShutting down Honeycomb service on node {0}".format(
+                        node["host"]))
                 ssh = SSH()
                 ssh.connect(node)
                 (ret_code, _, _) = ssh.exec_command_sudo(cmd)
                 ssh = SSH()
                 ssh.connect(node)
                 (ret_code, _, _) = ssh.exec_command_sudo(cmd)
@@ -107,96 +114,117 @@ class HoneycombSetup(object):
                                  format(errors))
 
     @staticmethod
                                  format(errors))
 
     @staticmethod
-    def check_honeycomb_startup_state(*nodes):
-        """Check state of Honeycomb service during startup on specified nodes.
+    def restart_honeycomb_on_dut(node):
+        """Restart Honeycomb on specified DUT nodes.
 
 
-        Reads html path from template file oper_vpp_version.url.
+        This keyword restarts the Honeycomb service on specified DUTs. Use the
+        keyword "Check Honeycomb Startup State" to check if the Honeycomb is up
+        and running.
 
 
-        Honeycomb nodes reply with connection refused or the following status
-        codes depending on startup progress: codes 200, 401, 403, 404, 500, 503
+        :param node: Node to restart Honeycomb on.
+        :type node: dict
+        :raises HoneycombError: If Honeycomb fails to start.
+        """
 
 
-        :param nodes: List of DUT nodes starting Honeycomb.
-        :type nodes: list
-        :return: True if all GETs returned code 200(OK).
-        :rtype bool
+        logger.console(
+            "\n(re)Starting Honeycomb service on node {0}".format(node["host"]))
+
+        cmd = "sudo service honeycomb restart"
+
+        ssh = SSH()
+        ssh.connect(node)
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd)
+        if int(ret_code) != 0:
+            raise HoneycombError('Node {0} failed to restart Honeycomb.'.
+                                 format(node['host']))
+        else:
+            logger.info(
+                "Honeycomb service restart is in progress on node {0}".format(
+                    node['host']))
+
+    @staticmethod
+    def check_honeycomb_startup_state(node, timeout=360, retries=20,
+                                      interval=15):
+        """Repeatedly check the status of Honeycomb startup until it is fully
+        started or until timeout or max retries is reached.
+
+        :param node: Honeycomb node.
+        :param timeout: Timeout value in seconds.
+        :param retries: Max number of retries.
+        :param interval: Interval between checks, in seconds.
+        :type node: dict
+        :type timeout: int
+        :type retries: int
+        :type interval: int
+        :raises HoneycombError: If the Honeycomb process IP cannot be found,
+            or if timeout or number of retries is exceeded.
         """
         """
-        path = HcUtil.read_path_from_url_file("oper_vpp_version")
-        expected_status_codes = (HTTPCodes.UNAUTHORIZED,
-                                 HTTPCodes.FORBIDDEN,
-                                 HTTPCodes.NOT_FOUND,
-                                 HTTPCodes.SERVICE_UNAVAILABLE,
-                                 HTTPCodes.INTERNAL_SERVER_ERROR)
 
 
-        for node in nodes:
-            if node['type'] == NodeType.DUT:
-                HoneycombSetup.print_ports(node)
-                status_code, _ = HTTPRequest.get(node, path,
-                                                 enable_logging=False)
-                if status_code == HTTPCodes.OK:
-                    logger.info("Honeycomb on node {0} is up and running".
-                                format(node['host']))
-                elif status_code in expected_status_codes:
-                    if status_code == HTTPCodes.UNAUTHORIZED:
-                        logger.info('Unauthorized. If this triggers keyword '
-                                    'timeout, verify Honeycomb username and '
-                                    'password.')
-                    raise HoneycombError('Honeycomb on node {0} running but '
-                                         'not yet ready.'.format(node['host']),
-                                         enable_logging=False)
-                else:
-                    raise HoneycombError('Unexpected return code: {0}.'.
-                                         format(status_code))
+        ssh = SSH()
+        ssh.connect(node)
+
+        count = 0
+        start = time()
+        while time() - start < timeout and count < retries:
+            count += 1
 
 
-                status_code, _ = HcUtil.get_honeycomb_data(
+            try:
+                status_code_version, _ = HcUtil.get_honeycomb_data(
+                    node, "oper_vpp_version")
+                status_code_if_cfg, _ = HcUtil.get_honeycomb_data(
                     node, "config_vpp_interfaces")
                     node, "config_vpp_interfaces")
-                if status_code != HTTPCodes.OK:
-                    raise HoneycombError('Honeycomb on node {0} running but '
-                                         'not yet ready.'.format(node['host']),
-                                         enable_logging=False)
-        return True
+                status_code_if_oper, _ = HcUtil.get_honeycomb_data(
+                    node, "oper_vpp_interfaces")
+            except HTTPRequestError:
+                sleep(interval)
+                continue
+            if status_code_if_cfg == HTTPCodes.OK\
+                    and status_code_if_cfg == HTTPCodes.OK\
+                    and status_code_if_oper == HTTPCodes.OK:
+                logger.info("Check successful, Honeycomb is up and running.")
+                break
+            else:
+                logger.debug(
+                    "Attempt ${count} failed on Restconf check. Status codes:\n"
+                    "Version: {version}\n"
+                    "Interface config: {if_cfg}\n"
+                    "Interface operational: {if_oper}".format(
+                        count=count,
+                        version=status_code_version,
+                        if_cfg=status_code_if_cfg,
+                        if_oper=status_code_if_oper))
+                sleep(interval)
+                continue
+        else:
+            _, vpp_status, _ = ssh.exec_command("sudo service vpp status")
+            raise HoneycombError(
+                "Timeout or max retries exceeded. Status of VPP:\n"
+                "{vpp_status}".format(vpp_status=vpp_status))
 
     @staticmethod
 
     @staticmethod
-    def check_honeycomb_shutdown_state(*nodes):
+    def check_honeycomb_shutdown_state(node):
         """Check state of Honeycomb service during shutdown on specified nodes.
 
         Honeycomb nodes reply with connection refused or the following status
         codes depending on shutdown progress: codes 200, 404.
 
         """Check state of Honeycomb service during shutdown on specified nodes.
 
         Honeycomb nodes reply with connection refused or the following status
         codes depending on shutdown progress: codes 200, 404.
 
-        :param nodes: List of DUT nodes stopping Honeycomb.
-        :type nodes: list
-        :return: True if all GETs fail to connect.
-        :rtype bool
+        :param node: List of DUT nodes stopping Honeycomb.
+        :type node: dict
+        :returns: True if all GETs fail to connect.
+        :rtype: bool
         """
         """
-        cmd = "ps -ef | grep -v grep | grep honeycomb"
-        for node in nodes:
-            if node['type'] == NodeType.DUT:
-                try:
-                    status_code, _ = HTTPRequest.get(node, '/index.html',
-                                                     enable_logging=False)
-                    if status_code == HTTPCodes.OK:
-                        raise HoneycombError('Honeycomb on node {0} is still '
-                                             'running.'.format(node['host']),
-                                             enable_logging=False)
-                    elif status_code == HTTPCodes.NOT_FOUND:
-                        raise HoneycombError('Honeycomb on node {0} is shutting'
-                                             ' down.'.format(node['host']),
-                                             enable_logging=False)
-                    else:
-                        raise HoneycombError('Unexpected return code: {0}.'.
-                                             format(status_code))
-                except HTTPRequestError:
-                    logger.debug('Connection refused, checking the process '
-                                 'state ...')
-                    ssh = SSH()
-                    ssh.connect(node)
-                    (ret_code, _, _) = ssh.exec_command_sudo(cmd)
-                    if ret_code == 0:
-                        raise HoneycombError('Honeycomb on node {0} is still '
-                                             'running.'.format(node['host']),
-                                             enable_logging=False)
-                    else:
-                        logger.info("Honeycomb on node {0} has stopped".
-                                    format(node['host']))
+        cmd = "pgrep honeycomb"
+
+        ssh = SSH()
+        ssh.connect(node)
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd)
+        if ret_code == 0:
+            raise HoneycombError('Honeycomb on node {0} is still '
+                                 'running.'.format(node['host']),
+                                 enable_logging=False)
+        else:
+            logger.info("Honeycomb on node {0} has stopped".
+                        format(node['host']))
         return True
 
     @staticmethod
         return True
 
     @staticmethod
@@ -204,10 +232,10 @@ class HoneycombSetup(object):
         """Configure Honeycomb to accept restconf requests from all IP
         addresses. IP version is determined by node data.
 
         """Configure Honeycomb to accept restconf requests from all IP
         addresses. IP version is determined by node data.
 
-         :param node: Information about a DUT node.
-         :type node: dict
-         :raises HoneycombError: If the configuration could not be changed.
-         """
+        :param node: Information about a DUT node.
+        :type node: dict
+        :raises HoneycombError: If the configuration could not be changed.
+        """
 
         find = "restconf-binding-address"
         try:
 
         find = "restconf-binding-address"
         try:
@@ -218,7 +246,7 @@ class HoneycombSetup(object):
             replace = '\\"restconf-binding-address\\": \\"0.0.0.0\\",'
 
         argument = '"/{0}/c\\ {1}"'.format(find, replace)
             replace = '\\"restconf-binding-address\\": \\"0.0.0.0\\",'
 
         argument = '"/{0}/c\\ {1}"'.format(find, replace)
-        path = "{0}/config/honeycomb.json".format(Const.REMOTE_HC_DIR)
+        path = "{0}/config/restconf.json".format(Const.REMOTE_HC_DIR)
         command = "sed -i {0} {1}".format(argument, path)
 
         ssh = SSH()
         command = "sed -i {0} {1}".format(argument, path)
 
         ssh = SSH()
@@ -232,12 +260,12 @@ class HoneycombSetup(object):
     def configure_jvpp_timeout(node, timeout=10):
         """Configure timeout value for Java API commands Honeycomb sends to VPP.
 
     def configure_jvpp_timeout(node, timeout=10):
         """Configure timeout value for Java API commands Honeycomb sends to VPP.
 
-         :param node: Information about a DUT node.
-         :param timeout: Timeout value in seconds.
-         :type node: dict
-         :type timeout: int
-         :raises HoneycombError: If the configuration could not be changed.
-         """
+        :param node: Information about a DUT node.
+        :param timeout: Timeout value in seconds.
+        :type node: dict
+        :type timeout: int
+        :raises HoneycombError: If the configuration could not be changed.
+        """
 
         find = "jvpp-request-timeout"
         replace = '\\"jvpp-request-timeout\\": {0}'.format(timeout)
 
         find = "jvpp-request-timeout"
         replace = '\\"jvpp-request-timeout\\": {0}'.format(timeout)
@@ -272,7 +300,8 @@ class HoneycombSetup(object):
                 "which java",
                 "java -version",
                 "dpkg --list | grep openjdk",
                 "which java",
                 "java -version",
                 "dpkg --list | grep openjdk",
-                "ls -la /opt/honeycomb")
+                "ls -la /opt/honeycomb",
+                "cat /opt/honeycomb/modules/*module-config")
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
@@ -341,30 +370,42 @@ class HoneycombSetup(object):
         :type feature: string
         :type disable: bool
         :raises HoneycombError: If the configuration could not be changed.
         :type feature: string
         :type disable: bool
         :raises HoneycombError: If the configuration could not be changed.
-         """
+        """
 
         disabled_features = {
 
         disabled_features = {
-            "NSH": "io.fd.hc2vpp.vppnsh.impl.VppNshModule"
+            "NSH": ["io.fd.hc2vpp.vppnsh.impl.VppNshModule"],
+            "BGP": ["io.fd.hc2vpp.bgp.inet.BgpInetModule",
+                    "io.fd.honeycomb.infra.bgp.BgpModule",
+                    "io.fd.honeycomb.infra.bgp.BgpReadersModule",
+                    "io.fd.honeycomb.infra.bgp.BgpWritersModule",
+                    "io.fd.honeycomb.northbound.bgp.extension.InetModule",
+                    "io.fd.honeycomb.northbound.bgp.extension.EvpnModule",
+                    "io.fd.honeycomb.northbound.bgp.extension.L3VpnV4Module",
+                    "io.fd.honeycomb.northbound.bgp.extension.L3VpnV6Module",
+                    "io.fd.honeycomb.northbound.bgp.extension."
+                    "LabeledUnicastModule",
+                    "io.fd.honeycomb.northbound.bgp.extension.LinkstateModule"]
         }
 
         ssh = SSH()
         ssh.connect(node)
 
         if feature in disabled_features.keys():
         }
 
         ssh = SSH()
         ssh.connect(node)
 
         if feature in disabled_features.keys():
-            # uncomment by replacing the entire line
-            find = replace = "{0}".format(disabled_features[feature])
-            if disable:
-                replace = "// {0}".format(find)
-
-            argument = '"/{0}/c\\ {1}"'.format(find, replace)
-            path = "{0}/modules/*module-config"\
-                .format(Const.REMOTE_HC_DIR)
-            command = "sed -i {0} {1}".format(argument, path)
-
-            (ret_code, _, stderr) = ssh.exec_command_sudo(command)
-            if ret_code != 0:
-                raise HoneycombError("Failed to modify configuration on "
-                                     "node {0}, {1}".format(node, stderr))
+            # for every module, uncomment by replacing the entire line
+            for item in disabled_features[feature]:
+                find = replace = "{0}".format(item)
+                if disable:
+                    replace = "// {0}".format(find)
+
+                argument = '"/{0}/c\\ {1}"'.format(find, replace)
+                path = "{0}/modules/*module-config"\
+                    .format(Const.REMOTE_HC_DIR)
+                command = "sed -i {0} {1}".format(argument, path)
+
+                (ret_code, _, stderr) = ssh.exec_command_sudo(command)
+                if ret_code != 0:
+                    raise HoneycombError("Failed to modify configuration on "
+                                         "node {0}, {1}".format(node, stderr))
         else:
             raise HoneycombError(
                 "Unrecognized feature {0}.".format(feature))
         else:
             raise HoneycombError(
                 "Unrecognized feature {0}.".format(feature))
@@ -424,10 +465,11 @@ class HoneycombSetup(object):
         ssh = SSH()
         ssh.connect(node)
 
         ssh = SSH()
         ssh.connect(node)
 
-        cmd = "cp -r {src}/*karaf_{odl_name}* {dst}".format(
-            src=src_path, odl_name=odl_name, dst=dst_path)
+        cmd = "sudo rm -rf {dst}/*karaf_{odl_name} && " \
+              "cp -r {src}/*karaf_{odl_name}* {dst}".format(
+                  src=src_path, odl_name=odl_name, dst=dst_path)
 
 
-        ret_code, _, _ = ssh.exec_command(cmd, timeout=30)
+        ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=180)
         if int(ret_code) != 0:
             raise HoneycombError(
                 "Failed to copy ODL client on node {0}".format(node["host"]))
         if int(ret_code) != 0:
             raise HoneycombError(
                 "Failed to copy ODL client on node {0}".format(node["host"]))
@@ -438,6 +480,7 @@ class HoneycombSetup(object):
 
         Karaf should be located in the provided path, and VPP and Honeycomb
         should already be running, otherwise the start will fail.
 
         Karaf should be located in the provided path, and VPP and Honeycomb
         should already be running, otherwise the start will fail.
+
         :param node: Node to start ODL client on.
         :param path: Path to ODL client on node.
         :type node: dict
         :param node: Node to start ODL client on.
         :param path: Path to ODL client on node.
         :type node: dict
@@ -460,13 +503,15 @@ class HoneycombSetup(object):
                         "in progress ...".format(node['host']))
 
     @staticmethod
                         "in progress ...".format(node['host']))
 
     @staticmethod
-    def install_odl_features(node, path, *features):
+    def install_odl_features(node, odl_name, path, *features):
         """Install required features on a running ODL client.
 
         :param node: Honeycomb node.
         """Install required features on a running ODL client.
 
         :param node: Honeycomb node.
+        :param odl_name: Name of ODL client version to use.
         :param path: Path to ODL client on node.
         :param features: Optional, list of additional features to install.
         :type node: dict
         :param path: Path to ODL client on node.
         :param features: Optional, list of additional features to install.
         :type node: dict
+        :type odl_name: str
         :type path: str
         :type features: list
         """
         :type path: str
         :type features: list
         """
@@ -474,12 +519,18 @@ class HoneycombSetup(object):
         ssh = SSH()
         ssh.connect(node)
 
         ssh = SSH()
         ssh.connect(node)
 
-        cmd = "{path}/*karaf*/bin/client -u karaf feature:install " \
-              "odl-restconf-all odl-netconf-connector-all".format(path=path)
+        auth = "-u karaf"
+        if odl_name.lower() == "oxygen":
+            auth = "-u karaf -p karaf"
+
+        cmd = "{path}/*karaf*/bin/client {auth} feature:install " \
+              "odl-restconf-all " \
+              "odl-netconf-connector-all " \
+              "odl-netconf-topology".format(path=path, auth=auth)
         for feature in features:
             cmd += " {0}".format(feature)
 
         for feature in features:
             cmd += " {0}".format(feature)
 
-        ret_code, _, stderr = ssh.exec_command_sudo(cmd, timeout=120)
+        ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=250)
 
         if int(ret_code) != 0:
             raise HoneycombError("Feature install did not succeed.")
 
         if int(ret_code) != 0:
             raise HoneycombError("Feature install did not succeed.")
@@ -520,6 +571,34 @@ class HoneycombSetup(object):
                                  format(status_code))
         return True
 
                                  format(status_code))
         return True
 
+    @staticmethod
+    def check_odl_shutdown_state(node):
+        """Check the status of ODL client shutdown.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :returns: True when ODL is stopped.
+        :rtype: bool
+        :raises HoneycombError: When the response is not code 200: OK.
+        """
+
+        cmd = "pgrep -f karaf"
+        path = HcUtil.read_path_from_url_file(
+            "odl_client/odl_netconf_connector")
+
+        try:
+            HTTPRequest.get(node, path, timeout=10, enable_logging=False)
+            raise HoneycombError("ODL client is still running.")
+        except HTTPRequestError:
+            logger.debug("Connection refused, checking process state....")
+            ssh = SSH()
+            ssh.connect(node)
+            ret_code, _, _ = ssh.exec_command(cmd)
+            if ret_code == 0:
+                raise HoneycombError("ODL client is still running.")
+
+        return True
+
     @staticmethod
     def mount_honeycomb_on_odl(node):
         """Tell ODL client to mount Honeycomb instance over netconf.
     @staticmethod
     def mount_honeycomb_on_odl(node):
         """Tell ODL client to mount Honeycomb instance over netconf.
@@ -533,14 +612,21 @@ class HoneycombSetup(object):
             "odl_client/odl_netconf_connector")
 
         url_file = "{0}/{1}".format(Const.RESOURCES_TPL_HC,
             "odl_client/odl_netconf_connector")
 
         url_file = "{0}/{1}".format(Const.RESOURCES_TPL_HC,
-                                    "odl_client/mount_honeycomb.xml")
+                                    "odl_client/mount_honeycomb.json")
 
         with open(url_file) as template:
             data = template.read()
 
 
         with open(url_file) as template:
             data = template.read()
 
+        data = loads(data)
+
         status_code, _ = HTTPRequest.post(
         status_code, _ = HTTPRequest.post(
-            node, path, headers={"Content-Type": "application/xml"},
-            payload=data, timeout=10, enable_logging=False)
+            node,
+            path,
+            headers={"Content-Type": "application/json",
+                     "Accept": "text/plain"},
+            json=data,
+            timeout=10,
+            enable_logging=False)
 
         if status_code == HTTPCodes.OK:
             logger.info("ODL mount point configured successfully.")
 
         if status_code == HTTPCodes.OK:
             logger.info("ODL mount point configured successfully.")
@@ -569,7 +655,7 @@ class HoneycombSetup(object):
         ssh.connect(node)
         ret_code, _, _ = ssh.exec_command_sudo(cmd)
         if int(ret_code) != 0:
         ssh.connect(node)
         ret_code, _, _ = ssh.exec_command_sudo(cmd)
         if int(ret_code) != 0:
-            logger.warn("ODL Client refused to shut down.")
+            logger.debug("ODL Client refused to shut down.")
             cmd = "pkill -f 'karaf'"
             (ret_code, _, _) = ssh.exec_command_sudo(cmd)
             if int(ret_code) != 0:
             cmd = "pkill -f 'karaf'"
             (ret_code, _, _) = ssh.exec_command_sudo(cmd)
             if int(ret_code) != 0:
@@ -579,18 +665,161 @@ class HoneycombSetup(object):
         logger.info("ODL client service stopped.")
 
     @staticmethod
         logger.info("ODL client service stopped.")
 
     @staticmethod
-    def stop_vpp_service(node):
-        """Stop VPP service on the specified node.
+    def set_static_arp(node, ip_address, mac_address):
+        """Configure a static ARP entry using arp.
 
 
-        :param node: VPP node.
+        :param node: Node in topology.
+        :param ip_address: IP address for the entry.
+        :param mac_address: MAC adddress for the entry.
         :type node: dict
         :type node: dict
-        :raises RuntimeError: If VPP fails to stop.
+        :type ip_address: str
+        :type mac_address: str
+        :raises RuntimeError: If the operation fails.
         """
 
         ssh = SSH()
         ssh.connect(node)
         """
 
         ssh = SSH()
         ssh.connect(node)
-        cmd = "service vpp stop"
-        ret_code, _, _ = ssh.exec_command_sudo(cmd)
-        if int(ret_code) != 0:
-            raise RuntimeError("Could not stop VPP service on node {0}".format(
-                node['host']))
+        ret_code, _, _ = ssh.exec_command_sudo("arp -s {0} {1}".format(
+            ip_address, mac_address))
+
+        if ret_code != 0:
+            raise RuntimeError("Failed to configure static ARP adddress.")
+
+
+class HoneycombStartupConfig(object):
+    """Generator for Honeycomb startup configuration.
+    """
+    def __init__(self):
+        """Initializer."""
+
+        self.template = """#!/bin/sh -
+        STATUS=100
+
+        while [ $STATUS -eq 100 ]
+        do
+          {java_call} -jar $(dirname $0)/{jar_filename}
+          STATUS=$?
+          echo "Honeycomb exited with status: $STATUS"
+          if [ $STATUS -eq 100 ]
+          then
+            echo "Restarting..."
+          fi
+        done
+        """
+
+        self.java_call = "{scheduler} {affinity} java{jit_mode}{params}"
+
+        self.scheduler = ""
+        self.core_affinity = ""
+        self.jit_mode = ""
+        self.params = ""
+        self.numa = ""
+
+        self.config = ""
+        self.ssh = SSH()
+
+    def apply_config(self, node):
+        """Generate configuration file /opt/honeycomb/honeycomb on the specified
+        node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        """
+
+        self.ssh.connect(node)
+        _, filename, _ = self.ssh.exec_command("ls /opt/honeycomb | grep .jar")
+
+        java_call = self.java_call.format(scheduler=self.scheduler,
+                                          affinity=self.core_affinity,
+                                          jit_mode=self.jit_mode,
+                                          params=self.params)
+        self.config = self.template.format(java_call=java_call,
+                                           jar_filename=filename)
+
+        self.ssh.connect(node)
+        cmd = "echo '{config}' > /tmp/honeycomb " \
+              "&& chmod +x /tmp/honeycomb " \
+              "&& sudo mv -f /tmp/honeycomb /opt/honeycomb".\
+            format(config=self.config)
+        self.ssh.exec_command(cmd)
+
+    def set_cpu_scheduler(self, scheduler="FIFO"):
+        """Use alternate CPU scheduler.
+
+        Note: OTHER scheduler doesn't load-balance over isolcpus.
+
+        :param scheduler: CPU scheduler to use.
+        :type scheduler: str
+        """
+
+        schedulers = {"FIFO": "-f 99",  # First In, First Out
+                      "RR": "-r 99",  # Round Robin
+                      "OTHER": "-o",  # Ubuntu default
+                     }
+        self.scheduler = "chrt {0}".format(schedulers[scheduler])
+
+    def set_cpu_core_affinity(self, low, high=None):
+        """Set core affinity for the honeycomb process and subprocesses.
+
+        :param low: Lowest core ID number.
+        :param high: Highest core ID number. Leave empty to use a single core.
+        :type low: int
+        :type high: int
+        """
+
+        self.core_affinity = "taskset -c {low}-{high}".format(
+            low=low, high=high if high else low)
+
+    def set_jit_compiler_mode(self, jit_mode):
+        """Set running mode for Java's JIT compiler.
+
+        :param jit_mode: Desiret JIT mode.
+        :type jit_mode: str
+        """
+
+        modes = {"client": " -client",  # Default
+                 "server": " -server",  # Higher performance but longer warmup
+                 "classic": " -classic"  # Disables JIT compiler
+                }
+
+        self.jit_mode = modes[jit_mode]
+
+    def set_memory_size(self, mem_min, mem_max=None):
+        """Set minimum and maximum memory use for the JVM.
+
+        :param mem_min: Minimum amount of memory (MB).
+        :param mem_max: Maximum amount of memory (MB). Default is 4 times
+            minimum value.
+        :type mem_min: int
+        :type mem_max: int
+        """
+
+        self.params += " -Xms{min}m -Xmx{max}m".format(
+            min=mem_min, max=mem_max if mem_max else mem_min*4)
+
+    def set_metaspace_size(self, mem_min, mem_max=None):
+        """Set minimum and maximum memory used for class metadata in the JVM.
+
+        :param mem_min: Minimum metaspace size (MB).
+        :param mem_max: Maximum metaspace size (MB). Defailt is 4 times
+            minimum value.
+        :type mem_min: int
+        :type mem_max: int
+        """
+
+        self.params += " -XX:MetaspaceSize={min}m " \
+                       "-XX:MaxMetaspaceSize={max}m".format(
+                           min=mem_min, max=mem_max if mem_max else mem_min*4)
+
+    def set_numa_optimization(self):
+        """Use optimization of memory use and garbage collection for NUMA
+        architectures."""
+
+        self.params += " -XX:+UseNUMA -XX:+UseParallelGC"
+
+    def set_ssh_security_provider(self):
+        """Disables BouncyCastle for SSHD."""
+        # Workaround for issue described in:
+        # https://wiki.fd.io/view/Honeycomb/Releases/1609/Honeycomb_and_ODL
+
+        self.params += " -Dorg.apache.sshd.registerBouncyCastle=false"