+
+ @staticmethod
+ def copy_odl_client(node, odl_name, src_path, dst_path):
+ """Copy ODL Client from source path to destination path.
+
+ :param node: Honeycomb node.
+ :param odl_name: Name of ODL client version to use.
+ :param src_path: Source Path where to find ODl client.
+ :param dst_path: Destination path.
+ :type node: dict
+ :type odl_name: str
+ :type src_path: str
+ :type dst_path: str
+ :raises HoneycombError: If the operation fails.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+
+ cmd = "cp -r {src}/*karaf_{odl_name}* {dst}".format(
+ src=src_path, odl_name=odl_name, dst=dst_path)
+
+ ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=60)
+ if int(ret_code) != 0:
+ raise HoneycombError(
+ "Failed to copy ODL client on node {0}".format(node["host"]))
+
+ @staticmethod
+ def setup_odl_client(node, path):
+ """Start ODL client on the specified node.
+
+ Karaf should be located in the provided path, and VPP and Honeycomb
+ should already be running, otherwise the start will fail.
+ :param node: Node to start ODL client on.
+ :param path: Path to ODL client on node.
+ :type node: dict
+ :type path: str
+ :raises HoneycombError: If Honeycomb fails to start.
+ """
+
+ logger.console("\nStarting ODL client ...")
+ ssh = SSH()
+ ssh.connect(node)
+
+ cmd = "{path}/*karaf*/bin/start clean".format(path=path)
+ ret_code, _, _ = ssh.exec_command_sudo(cmd)
+
+ if int(ret_code) != 0:
+ raise HoneycombError('Node {0} failed to start ODL.'.
+ format(node['host']))
+ else:
+ logger.info("Starting the ODL client on node {0} is "
+ "in progress ...".format(node['host']))
+
+ @staticmethod
+ def install_odl_features(node, path, *features):
+ """Install required features on a running ODL client.
+
+ :param node: Honeycomb node.
+ :param path: Path to ODL client on node.
+ :param features: Optional, list of additional features to install.
+ :type node: dict
+ :type path: str
+ :type features: list
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+
+ cmd = "{path}/*karaf*/bin/client -u karaf feature:install " \
+ "odl-restconf-all odl-netconf-connector-all".format(path=path)
+ for feature in features:
+ cmd += " {0}".format(feature)
+
+ ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=120)
+
+ if int(ret_code) != 0:
+ raise HoneycombError("Feature install did not succeed.")
+
+ @staticmethod
+ def check_odl_startup_state(node):
+ """Check the status of ODL client startup.
+
+ :param node: Honeycomb node.
+ :param node: dict
+ :returns: True when ODL is started.
+ :rtype: bool
+ :raises HoneycombError: When the response is not code 200: OK.
+ """
+
+ path = HcUtil.read_path_from_url_file(
+ "odl_client/odl_netconf_connector")
+ expected_status_codes = (HTTPCodes.UNAUTHORIZED,
+ HTTPCodes.FORBIDDEN,
+ HTTPCodes.NOT_FOUND,
+ HTTPCodes.SERVICE_UNAVAILABLE,
+ HTTPCodes.INTERNAL_SERVER_ERROR)
+
+ status_code, _ = HTTPRequest.get(node, path, timeout=10,
+ enable_logging=False)
+ if status_code == HTTPCodes.OK:
+ logger.info("ODL client on node {0} is up and running".
+ format(node['host']))
+ elif status_code in expected_status_codes:
+ if status_code == HTTPCodes.UNAUTHORIZED:
+ logger.info('Unauthorized. If this triggers keyword '
+ 'timeout, verify username and password.')
+ raise HoneycombError('ODL client on node {0} running but '
+ 'not yet ready.'.format(node['host']),
+ enable_logging=False)
+ else:
+ raise HoneycombError('Unexpected return code: {0}.'.
+ format(status_code))
+ return True
+
+ @staticmethod
+ def check_odl_shutdown_state(node):
+ """Check the status of ODL client shutdown.
+
+ :param node: Honeycomb node.
+ :type node: dict
+ :returns: True when ODL is stopped.
+ :rtype: bool
+ :raises HoneycombError: When the response is not code 200: OK.
+ """
+
+ cmd = "pgrep -f karaf"
+ path = HcUtil.read_path_from_url_file(
+ "odl_client/odl_netconf_connector")
+
+ try:
+ HTTPRequest.get(node, path, timeout=10, enable_logging=False)
+ raise HoneycombError("ODL client is still running.")
+ except HTTPRequestError:
+ logger.debug("Connection refused, checking process state....")
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code == 0:
+ raise HoneycombError("ODL client is still running.")
+
+ return True
+
+ @staticmethod
+ def mount_honeycomb_on_odl(node):
+ """Tell ODL client to mount Honeycomb instance over netconf.
+
+ :param node: Honeycomb node.
+ :type node: dict
+ :raises HoneycombError: When the response is not code 200: OK.
+ """
+
+ path = HcUtil.read_path_from_url_file(
+ "odl_client/odl_netconf_connector")
+
+ url_file = "{0}/{1}".format(Const.RESOURCES_TPL_HC,
+ "odl_client/mount_honeycomb.xml")
+
+ with open(url_file) as template:
+ data = template.read()
+
+ status_code, _ = HTTPRequest.post(
+ node, path, headers={"Content-Type": "application/xml"},
+ payload=data, timeout=10, enable_logging=False)
+
+ if status_code == HTTPCodes.OK:
+ logger.info("ODL mount point configured successfully.")
+ elif status_code == HTTPCodes.CONFLICT:
+ logger.info("ODL mount point was already configured.")
+ else:
+ raise HoneycombError('Mount point configuration not successful')
+
+ @staticmethod
+ def stop_odl_client(node, path):
+ """Stop ODL client service on the specified node.
+
+ :param node: Node to start ODL client on.
+ :param path: Path to ODL client.
+ :type node: dict
+ :type path: str
+ :raises HoneycombError: If ODL client fails to stop.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+
+ cmd = "{0}/*karaf*/bin/stop".format(path)
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command_sudo(cmd)
+ if int(ret_code) != 0:
+ logger.debug("ODL Client refused to shut down.")
+ cmd = "pkill -f 'karaf'"
+ (ret_code, _, _) = ssh.exec_command_sudo(cmd)
+ if int(ret_code) != 0:
+ raise HoneycombError('Node {0} failed to stop ODL.'.
+ format(node['host']))
+
+ logger.info("ODL client service stopped.")
+
+ @staticmethod
+ def stop_vpp_service(node):
+ """Stop VPP service on the specified node.
+
+ :param node: VPP node.
+ :type node: dict
+ :raises RuntimeError: If VPP fails to stop.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+ cmd = "service vpp stop"
+ ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=80)
+ if int(ret_code) != 0:
+ logger.debug("VPP service refused to shut down.")
+
+class HoneycombStartupConfig(object):
+ """Generator for Honeycomb startup configuration.
+ """
+ def __init__(self):
+ """Initializer."""
+
+ self.template = """
+ #!/bin/sh -
+ STATUS=100
+
+ while [ $STATUS -eq 100 ]
+ do
+ {java_call} -jar $(dirname $0)/{jar_filename}
+ STATUS=$?
+ echo "Honeycomb exited with status: $STATUS"
+ if [ $STATUS -eq 100 ]
+ then
+ echo "Restarting..."
+ fi
+ done
+ """
+
+ self.java_call = "{scheduler} {affinity} java {jit_mode} {params}"
+
+ self.scheduler = ""
+ self.core_affinity = ""
+ self.jit_mode = ""
+ self.params = ""
+ self.numa = ""
+
+ self.config = ""
+ self.ssh = SSH()
+
+ def apply_config(self, node):
+ """Generate configuration file /opt/honeycomb/honeycomb on the specified
+ node.
+
+ :param node: Honeycomb node.
+ :type node: dict
+ """
+
+ self.ssh.connect(node)
+ _, filename, _ = self.ssh.exec_command("ls /opt/honeycomb | grep .jar")
+
+ java_call = self.java_call.format(scheduler=self.scheduler,
+ affinity=self.core_affinity,
+ jit_mode=self.jit_mode,
+ params=self.params)
+ self.config = self.template.format(java_call=java_call,
+ jar_filename=filename)
+
+ self.ssh.connect(node)
+ cmd = "echo '{config}' > /tmp/honeycomb " \
+ "&& chmod +x /tmp/honeycomb " \
+ "&& sudo mv -f /tmp/honeycomb /opt/honeycomb".\
+ format(config=self.config)
+ self.ssh.exec_command(cmd)
+
+ def set_cpu_scheduler(self, scheduler="FIFO"):
+ """Use alternate CPU scheduler.
+
+ Note: OTHER scheduler doesn't load-balance over isolcpus.
+
+ :param scheduler: CPU scheduler to use.
+ :type scheduler: str
+ """
+
+ schedulers = {"FIFO": "-f 99", # First In, First Out
+ "RR": "-r 99", # Round Robin
+ "OTHER": "-o", # Ubuntu default
+ }
+ self.scheduler = "chrt {0}".format(schedulers[scheduler])
+
+ def set_cpu_core_affinity(self, low, high=None):
+ """Set core affinity for the honeycomb process and subprocesses.
+
+ :param low: Lowest core ID number.
+ :param high: Highest core ID number. Leave empty to use a single core.
+ :type low: int
+ :type high: int
+ """
+
+ self.core_affinity = "taskset -c {low}-{high}".format(
+ low=low, high=high if high else low)
+
+ def set_jit_compiler_mode(self, jit_mode):
+ """Set running mode for Java's JIT compiler.
+
+ :param jit_mode: Desiret JIT mode.
+ :type jit_mode: str
+ """
+
+ modes = {"client": "-client", # Default
+ "server": "-server", # Higher performance but longer warmup
+ "classic": "-classic" # Disables JIT compiler
+ }
+
+ self.jit_mode = modes[jit_mode]
+
+ def set_memory_size(self, mem_min, mem_max=None):
+ """Set minimum and maximum memory use for the JVM.
+
+ :param mem_min: Minimum amount of memory (MB).
+ :param mem_max: Maximum amount of memory (MB). Default is 4 times
+ minimum value.
+ :type mem_min: int
+ :type mem_max: int
+ """
+
+ self.params += " -Xms{min}m -Xmx{max}m".format(
+ min=mem_min, max=mem_max if mem_max else mem_min*4)
+
+ def set_metaspace_size(self, mem_min, mem_max=None):
+ """Set minimum and maximum memory used for class metadata in the JVM.
+
+ :param mem_min: Minimum metaspace size (MB).
+ :param mem_max: Maximum metaspace size (MB). Defailt is 4 times
+ minimum value.
+ :type mem_min: int
+ :type mem_max: int
+ """
+
+ self.params += " -XX:MetaspaceSize={min}m " \
+ "-XX:MaxMetaspaceSize={max}m".format(
+ min=mem_min, max=mem_max if mem_max else mem_min*4)
+
+ def set_numa_optimization(self):
+ """Use optimization of memory use and garbage collection for NUMA
+ architectures."""
+
+ self.params += " -XX:+UseNUMA -XX:+UseParallelGC"