-| Setup '${m}' worker threads and rss '${n}' without HTT on all DUTs
-| | [Documentation] | Setup M worker threads without HTT and rss N in startup
-| | ... | configuration of VPP on all DUTs
-| | ${cpu}= | Catenate | main-core | 0 | corelist-workers
-| | ${cpu}= | Run Keyword If | '${m}' == '1' | Catenate | ${cpu} | 1
-| | ... | ELSE IF | '${m}' == '2' | Catenate | ${cpu} | 1-2
-| | ... | ELSE IF | '${m}' == '4' | Catenate | ${cpu} | 1-4
-| | ... | ELSE IF | '${m}' == '6' | Catenate | ${cpu} | 1-6
-| | ... | ELSE | Fail | Not supported combination
-| | ${rss}= | Catenate | rss | ${n}
-| | Setup worker threads and rss on all DUTs | ${cpu} | ${rss}
-
-| Setup '${m}' worker threads and rss '${n}' with HTT on all DUTs
-| | [Documentation] | Setup M worker threads with HTT and rss N in startup
-| | ... | configuration of VPP on all DUTs
-| | ${cpu}= | Catenate | main-core | 0 | corelist-workers
-| | ${cpu}= | Run Keyword If | '${m}' == '2' | Catenate | ${cpu} | 1,10
-| | ... | ELSE IF | '${m}' == '4' | Catenate | ${cpu} | 1-2,10-11
-| | ... | ELSE IF | '${m}' == '6' | Catenate | ${cpu} | 1-3,10-12
-| | ... | ELSE IF | '${m}' == '8' | Catenate | ${cpu} | 1-4,10-13
-| | ... | ELSE | Fail | Not supported combination
-| | ${rss}= | Catenate | rss | ${n}
-| | Setup worker threads and rss on all DUTs | ${cpu} | ${rss}
-
-| Setup worker threads and rss on all DUTs
-| | [Documentation] | Setup worker threads and rss in startup configuration of
-| | ... | VPP on all DUTs
-| | [Arguments] | ${cpu} | ${rss}
-| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
-| | | Add CPU config | ${nodes['${dut}']}
-| | | ... | ${cpu}
-| | | Add PCI device | ${nodes['${dut}']}
-| | | Add RSS config | ${nodes['${dut}']}
-| | | ... | ${rss}
-| | | Apply config | ${nodes['${dut}']}
-
-| Reset startup configuration of VPP on all DUTs
-| | [Documentation] | Reset startup configuration of VPP on all DUTs
-| | ${cpu}= | Catenate | main-core | 1
+| Show Vpp Version On All DUTs
+| | [Documentation] | Show VPP version verbose on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Vpp show version verbose | ${nodes['${dut}']}
+
+| Show Vpp Errors On All DUTs
+| | [Documentation] | Show VPP errors verbose on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Vpp Show Errors | ${nodes['${dut}']}
+
+| Show Vpp Trace Dump On All DUTs
+| | [Documentation] | Save API trace and dump output on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Vpp api trace save | ${nodes['${dut}']}
+| | | Vpp api trace dump | ${nodes['${dut}']}
+
+| Show Vpp Vhost On All DUTs
+| | [Documentation] | Show Vhost User on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Vpp Show Vhost | ${nodes['${dut}']}
+
+| Show Bridge Domain Data On All DUTs
+| | [Documentation] | Show Bridge Domain data on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Vpp Get Bridge Domain Data | ${nodes['${dut}']}
+
+| Setup Scheduler Policy for Vpp On All DUTs
+| | [Documentation] | Set realtime scheduling policy (SCHED_RR) with priority 1
+| | ... | on all VPP worker threads on all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Set VPP Scheduling rr | ${nodes['${dut}']}
+
+| Verify Crypto Device On All DUTs
+| | [Documentation] | Verify if Crypto QAT device virtual functions are
+| | ... | initialized on all DUTs. If parameter force_init is set to True, then
+| | ... | try to initialize.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${force_init} - Try to initialize. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Verify Crypto Device On All DUTs \| ${True} \|
+| | ...
+| | [Arguments] | ${force_init}=${False}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Crypto Device Verify | ${nodes['${dut}']} | force_init=${force_init}
+
+| Verify Kernel Module On All DUTs
+| | [Documentation] | Verify if specific kernel module is loaded on all DUTs.
+| | ... | If parameter force_load is set to True, then try to initialize.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${module} - Module to verify. Type: string
+| | ... | - ${force_load} - Try to load module. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Verify Kernel Module On All DUTs \| ${True} \|
+| | ...
+| | [Arguments] | ${module} | ${force_load}=${False}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Kernel Module Verify | ${nodes['${dut}']} | ${module}
+| | | ... | force_load=${force_load}
+
+| Add '${m}' worker threads and rxqueues '${n}' in 3-node single-link topo
+| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
+| | ... | configuration on all DUTs in 3-node single-link topology.
+| | ...
+| | ${m_int}= | Convert To Integer | ${m}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1}
+| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
+| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1}
+| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
+| | ${dut1_cpu}= | Catenate | main-core | ${dut1_cpu_main}
+| | ... | corelist-workers | ${dut1_cpu_w}
+| | ${dut2_cpu}= | Catenate | main-core | ${dut2_cpu_main}
+| | ... | corelist-workers | ${dut2_cpu_w}
+| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
+| | Add CPU config | ${dut1} | ${dut1_cpu}
+| | Add CPU config | ${dut2} | ${dut2_cpu}
+| | Add rxqueues config | ${dut1} | ${rxqueues}
+| | Add rxqueues config | ${dut2} | ${rxqueues}
+
+| Add '${m}' worker threads and rxqueues '${n}' in 2-node single-link topo
+| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
+| | ... | configuration on all DUTs in 2-node single-link topology.
+| | ...
+| | ${m_int}= | Convert To Integer | ${m}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1}
+| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
+| | ${dut1_cpu}= | Catenate | main-core | ${dut1_cpu_main}
+| | ... | corelist-workers | ${dut1_cpu_w}
+| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
+| | Add CPU config | ${dut1} | ${dut1_cpu}
+| | Add rxqueues config | ${dut1} | ${rxqueues}
+
+| Add '${m}' worker threads using SMT and rxqueues '${n}' in 3-node single-link topo
+| | [Documentation] | Setup M worker threads using SMT and N rxqueues in vpp\
+| | ... | startup configuration on all DUTs in 3-node single-link topology.
+| | ...
+| | ${m_int}= | Convert To Integer | ${m}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
+| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
+| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
+| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
+| | ${dut1_cpu}= | Catenate | main-core | ${dut1_cpu_main}
+| | ... | corelist-workers | ${dut1_cpu_w}
+| | ${dut2_cpu}= | Catenate | main-core | ${dut2_cpu_main}
+| | ... | corelist-workers | ${dut2_cpu_w}
+| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
+| | Add CPU config | ${dut1} | ${dut1_cpu}
+| | Add CPU config | ${dut2} | ${dut2_cpu}
+| | Add rxqueues config | ${dut1} | ${rxqueues}
+| | Add rxqueues config | ${dut2} | ${rxqueues}
+
+| Add '${m}' worker threads using SMT and rxqueues '${n}' in 2-node single-link topo
+| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
+| | ... | configuration on all DUTs in 2-node single-link topology.
+| | ...
+| | ${m_int}= | Convert To Integer | ${m}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
+| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
+| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
+| | ${dut1_cpu}= | Catenate | main-core | ${dut1_cpu_main}
+| | ... | corelist-workers | ${dut1_cpu_w}
+| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
+| | Add CPU config | ${dut1} | ${dut1_cpu}
+| | Add rxqueues config | ${dut1} | ${rxqueues}
+
+| Add worker threads and rxqueues to all DUTs
+| | [Documentation] | Setup worker threads and rxqueues in VPP startup\
+| | ... | configuration to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${cpu} - CPU configuration. Type: string
+| | ... | - ${rxqueues} - rxqueues configuration. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add worker threads and rxqueues to all DUTs \| main-core 0 \
+| | ... | \| rxqueues 2 \|
+| | ...
+| | [Arguments] | ${cpu} | ${rxqueues}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add CPU config | ${nodes['${dut}']} | ${cpu}
+| | | Add rxqueues config | ${nodes['${dut}']} | ${rxqueues}
+
+| Add all PCI devices to all DUTs
+| | [Documentation] | Add all available PCI devices from topology file to VPP\
+| | ... | startup configuration to all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add PCI all devices | ${nodes['${dut}']}
+
+| Add PCI device to DUT
+| | [Documentation] | Add PCI device to VPP startup configuration
+| | ... | to DUT specified as argument.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${node} - DUT node. Type: dictionary
+| | ... | - ${pci_address} - PCI address. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add PCI device to DUT \| ${nodes['DUT1']} \| 0000:00:00.0 \|
+| | ...
+| | [Arguments] | ${node} | ${pci_address}
+| | ...
+| | Add PCI device | ${node} | ${pci_address}
+
+| Add Heapsize Config to all DUTs
+| | [Documentation] | Add Add Heapsize Config to VPP startup configuration\
+| | ... | to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${heapsize} - Heapsize string (5G, 200M, ...)
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add Heapsize Config to all DUTs \| 200M \|
+| | ...
+| | [Arguments] | ${heapsize}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add Heapsize Config | ${nodes['${dut}']} | ${heapsize}
+
+| Add No Multi Seg to all DUTs
+| | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add No Multi Seg Config | ${nodes['${dut}']}
+
+| Add Enable Vhost User to all DUTs
+| | [Documentation] | Add Enable Vhost User to VPP startup configuration to all\
+| | ... | DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add Enable Vhost User Config | ${nodes['${dut}']}
+
+| Add SNAT to all DUTs
+| | [Documentation] | Add SNAT configuration to all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add SNAT Config | ${nodes['${dut}']}
+
+| Add Cryptodev to all DUTs
+| | [Documentation] | AddCryptodev to VPP startup configuration to all
+| | ... | DUTs
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${count} - Number of QAT devices. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add Cryptodev to all DUTs \| ${4} \|
+| | ...
+| | [Arguments] | ${count}
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add Cryptodev Config | ${nodes['${dut}']} | ${count}
+
+| Remove startup configuration of VPP from all DUTs
+| | [Documentation] | Remove VPP startup configuration from all DUTs.
+| | ...