-| | | Run keyword
-| | | ... | ${dut}.Add DPDK Dev Default RXQ | ${rxq_count_int}
-# For now there is no way to easily predict the number of buffers. Statically
-# doing maximum amount of buffers allowed by DPDK.
-| | | Run keyword if | ${smt_used}
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${215040} | ELSE
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${107520}
-| | | Run keyword if | ${thr_count_int} > 1
-| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
-| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
-| | Set Test Variable | ${smt_used}
-| | Set Test Variable | ${thr_count_int}
-| | Set Test Variable | ${cpu_count_int}
-| | Set Test Variable | ${rxq_count_int}
-
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${jumbo} - Jumbo packet. Type: boolean
-| | ... | - ${phy_cores} - Physical cores. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${True} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo}=${False}
-| | ...
-| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
-| | ${thr_count_int} | Convert to Integer | ${phy_cores}
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']}
-| | | ... | ${${dut}_if1} | ${${dut}_if2}
-| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
-| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | | ... | Evaluate | int(${cpu_count_int}*2)
-| | | ... | ELSE | Set variable | ${thr_count_int}
-| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
-| | | ... | Set variable | ${rx_queues}
-| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
-| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
-| | | ... | Set variable | ${1}
-| | | ... | ELSE | Set variable | ${rxq_count_int}
-| | | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | | ... | node=${nodes['${dut}']} | phy_cores=${phy_cores}
-| | | ... | cpu_node=${numa} | jumbo=${jumbo} | rxq_count_int=${rxq_count_int}
-| | | ... | buffers_per_numa=${215040}
-| | | ... | filename=/tmp/vswitch.conf | if1=${if1_pci} | if2=${if2_pci}
-| | | Run keyword if | ${thr_count_int} > 1
-| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
-| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
-| | Set Test Variable | ${smt_used}
-| | Set Test Variable | ${thr_count_int}
-| | Set Test Variable | ${cpu_count_int}
-| | Set Test Variable | ${rxq_count_int}
-
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | phy_cores=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | phy_cores=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| Add PCI devices to all DUTs
-| | [Documentation]
-| | ... | Add PCI devices to VPP configuration file.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1}
-| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2}
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1}
-| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2}
-| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Create List | ${if1_pci}
-| | | ... | ELSE
-| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Append To List | ${pci_devs} | ${if2_pci}
-| | | ... | ELSE
-| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci}
-| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci}
-
-| Add single PCI device to all DUTs
-| | [Documentation]
-| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on
-| | ... | DUT2 to VPP configuration file.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci}
-| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci}
-
-| Add no multi seg to all DUTs
-| | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK No Multi Seg
-
-| Add DPDK no PCI to all DUTs
-| | [Documentation] | Add DPDK no-pci to VPP startup configuration to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK no PCI
-
-| Add DPDK dev default RXD to all DUTs
-| | [Documentation] | Add DPDK num-rx-desc to VPP startup configuration to all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - rxd - Number of RX descriptors. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK dev default RXD to all DUTs \| ${rxd} \|
-| | ...
-| | [Arguments] | ${rxd}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Dev Default RXD | ${rxd}
-
-| Add DPDK dev default TXD to all DUTs
-| | [Documentation] | Add DPDK num-tx-desc to VPP startup configuration to all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - txd - Number of TX descriptors. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK dev default TXD to all DUTs \| ${txd} \|
-| | ...
-| | [Arguments] | ${txd}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Dev Default TXD | ${txd}
-
-| Add DPDK Uio Driver on all DUTs
-| | [Documentation] | Add DPDK uio driver to VPP startup configuration on all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - uio_driver - Required uio driver. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK Uio Driver on all DUTs \| igb_uio \|
-| | ...
-| | [Arguments] | ${uio_driver}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Uio Driver | ${uio_driver}