+static clib_error_t *
+set_ip_directed_broadcast (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ vnet_main_t *vnm = vnet_get_main ();
+ u32 sw_if_index = ~0;
+ u8 enable = 0;
+
+ if (!unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index));
+ else if (unformat (input, "enable"))
+ enable = 1;
+ else if (unformat (input, "disable"))
+ enable = 0;
+ else
+ return clib_error_return (0, "unknown input: `%U'",
+ format_unformat_error, input);
+
+ if (~0 == sw_if_index)
+ return clib_error_return (0, "specify an interface: `%U'",
+ format_unformat_error, input);
+
+ vnet_sw_interface_ip_directed_broadcast (vnm, sw_if_index, enable);
+
+ return 0;
+}
+
+/*?
+ * This command is used to enable/disable IP directed broadcast
+ * If directed broadcast is enabled a packet sent to the interface's
+ * subnet broadcast address will be sent L2 broadcast on the interface,
+ * otherwise it is dropped.
+ ?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (set_ip_directed_broadcast_command, static) = {
+ .path = "set interface ip directed-broadcast",
+ .short_help = "set interface enable <interface> <enable|disable>",
+ .function = set_ip_directed_broadcast,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_hw_interface_rx_mode (vnet_main_t * vnm, u32 hw_if_index,
+ u32 queue_id, vnet_hw_interface_rx_mode mode)
+{
+ vnet_hw_interface_t *hw = vnet_get_hw_interface (vnm, hw_if_index);
+ vnet_device_class_t *dev_class =
+ vnet_get_device_class (vnm, hw->dev_class_index);
+ clib_error_t *error;
+ vnet_hw_interface_rx_mode old_mode;
+ int rv;
+
+ if (mode == VNET_HW_INTERFACE_RX_MODE_DEFAULT)
+ mode = hw->default_rx_mode;
+
+ rv = vnet_hw_interface_get_rx_mode (vnm, hw_if_index, queue_id, &old_mode);
+ switch (rv)
+ {
+ case 0:
+ if (old_mode == mode)
+ return 0; /* same rx-mode, no change */
+ break;
+ case VNET_API_ERROR_INVALID_INTERFACE:
+ return clib_error_return (0, "invalid interface");
+ case VNET_API_ERROR_INVALID_QUEUE:
+ return clib_error_return (0, "invalid queue");
+ default:
+ return clib_error_return (0, "unknown error");
+ }
+
+ if (dev_class->rx_mode_change_function)
+ {
+ error = dev_class->rx_mode_change_function (vnm, hw_if_index, queue_id,
+ mode);
+ if (error)
+ return (error);
+ }
+
+ rv = vnet_hw_interface_set_rx_mode (vnm, hw_if_index, queue_id, mode);
+ switch (rv)
+ {
+ case 0:
+ break;
+ case VNET_API_ERROR_UNSUPPORTED:
+ return clib_error_return (0, "unsupported");
+ case VNET_API_ERROR_INVALID_INTERFACE:
+ return clib_error_return (0, "invalid interface");
+ case VNET_API_ERROR_INVALID_QUEUE:
+ return clib_error_return (0, "invalid queue");
+ default:
+ return clib_error_return (0, "unknown error");
+ }
+
+ return 0;
+}
+
+clib_error_t *
+set_hw_interface_change_rx_mode (vnet_main_t * vnm, u32 hw_if_index,
+ u8 queue_id_valid, u32 queue_id,
+ vnet_hw_interface_rx_mode mode)
+{
+ clib_error_t *error = 0;
+ vnet_hw_interface_t *hw;
+ int i;
+
+ hw = vnet_get_hw_interface (vnm, hw_if_index);
+
+ if (queue_id_valid == 0)
+ {
+ for (i = 0; i < vec_len (hw->dq_runtime_index_by_queue); i++)
+ {
+ error = set_hw_interface_rx_mode (vnm, hw_if_index, i, mode);
+ if (error)
+ break;
+ }
+ hw->default_rx_mode = mode;
+ }
+ else
+ error = set_hw_interface_rx_mode (vnm, hw_if_index, queue_id, mode);
+
+ return (error);
+}
+
+static clib_error_t *
+set_interface_rx_mode (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ clib_error_t *error = 0;
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vnet_main_t *vnm = vnet_get_main ();
+ u32 hw_if_index = (u32) ~ 0;
+ u32 queue_id = (u32) ~ 0;
+ vnet_hw_interface_rx_mode mode = VNET_HW_INTERFACE_RX_MODE_UNKNOWN;
+ u8 queue_id_valid = 0;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
+ ;
+ else if (unformat (line_input, "queue %d", &queue_id))
+ queue_id_valid = 1;
+ else if (unformat (line_input, "polling"))
+ mode = VNET_HW_INTERFACE_RX_MODE_POLLING;
+ else if (unformat (line_input, "interrupt"))
+ mode = VNET_HW_INTERFACE_RX_MODE_INTERRUPT;
+ else if (unformat (line_input, "adaptive"))
+ mode = VNET_HW_INTERFACE_RX_MODE_ADAPTIVE;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ unformat_free (line_input);
+ return error;
+ }
+ }
+
+ unformat_free (line_input);
+
+ if (hw_if_index == (u32) ~ 0)
+ return clib_error_return (0, "please specify valid interface name");
+
+ if (mode == VNET_HW_INTERFACE_RX_MODE_UNKNOWN)
+ return clib_error_return (0, "please specify valid rx-mode");
+
+ error = set_hw_interface_change_rx_mode (vnm, hw_if_index, queue_id_valid,
+ queue_id, mode);
+
+ return (error);
+}
+
+/*?
+ * This command is used to assign the RX packet processing mode (polling,
+ * interrupt, adaptive) of the a given interface, and optionally a
+ * given queue. If the '<em>queue</em>' is not provided, the '<em>mode</em>'
+ * is applied to all queues of the interface. Not all interfaces support
+ * all modes. To display the current rx-mode use the command
+ * '<em>show interface rx-placement</em>'.
+ *
+ * @cliexpar
+ * Example of how to assign rx-mode to all queues on an interface:
+ * @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 polling}
+ * Example of how to assign rx-mode to one queue of an interface:
+ * @cliexcmd{set interface rx-mode VirtualEthernet0/0/12 queue 0 interrupt}
+ * Example of how to display the rx-mode of all interfaces:
+ * @cliexstart{show interface rx-placement}
+ * Thread 1 (vpp_wk_0):
+ * node dpdk-input:
+ * GigabitEthernet7/0/0 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 0 (interrupt)
+ * VirtualEthernet0/0/12 queue 2 (polling)
+ * VirtualEthernet0/0/13 queue 0 (polling)
+ * VirtualEthernet0/0/13 queue 2 (polling)
+ * Thread 2 (vpp_wk_1):
+ * node dpdk-input:
+ * GigabitEthernet7/0/1 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 1 (polling)
+ * VirtualEthernet0/0/12 queue 3 (polling)
+ * VirtualEthernet0/0/13 queue 1 (polling)
+ * VirtualEthernet0/0/13 queue 3 (polling)
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_if_rx_mode,static) = {
+ .path = "set interface rx-mode",
+ .short_help = "set interface rx-mode <interface> [queue <n>] [polling | interrupt | adaptive]",
+ .function = set_interface_rx_mode,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_interface_rx_placement_fn (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ u8 *s = 0;
+ vnet_main_t *vnm = vnet_get_main ();
+ vnet_device_input_runtime_t *rt;
+ vnet_device_and_queue_t *dq;
+ vlib_node_t *pn = vlib_get_node_by_name (vm, (u8 *) "device-input");
+ uword si;
+ int index = 0;
+
+ /* *INDENT-OFF* */
+ foreach_vlib_main (({
+ clib_bitmap_foreach (si, pn->sibling_bitmap,
+ ({
+ rt = vlib_node_get_runtime_data (this_vlib_main, si);
+
+ if (vec_len (rt->devices_and_queues))
+ s = format (s, " node %U:\n", format_vlib_node_name, vm, si);
+
+ vec_foreach (dq, rt->devices_and_queues)
+ {
+ vnet_hw_interface_t *hi = vnet_get_hw_interface (vnm,
+ dq->hw_if_index);
+ s = format (s, " %U queue %u (%U)\n",
+ format_vnet_sw_if_index_name, vnm, hi->sw_if_index,
+ dq->queue_id,
+ format_vnet_hw_interface_rx_mode, dq->mode);
+ }
+ }));
+ if (vec_len (s) > 0)
+ {
+ vlib_cli_output(vm, "Thread %u (%s):\n%v", index,
+ vlib_worker_threads[index].name, s);
+ vec_reset_length (s);
+ }
+ index++;
+ }));
+ /* *INDENT-ON* */
+
+ vec_free (s);
+ return 0;
+}
+
+/*?
+ * This command is used to display the interface and queue worker
+ * thread placement.
+ *
+ * @cliexpar
+ * Example of how to display the interface placement:
+ * @cliexstart{show interface rx-placement}
+ * Thread 1 (vpp_wk_0):
+ * node dpdk-input:
+ * GigabitEthernet7/0/0 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 0 (polling)
+ * VirtualEthernet0/0/12 queue 2 (polling)
+ * VirtualEthernet0/0/13 queue 0 (polling)
+ * VirtualEthernet0/0/13 queue 2 (polling)
+ * Thread 2 (vpp_wk_1):
+ * node dpdk-input:
+ * GigabitEthernet7/0/1 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 1 (polling)
+ * VirtualEthernet0/0/12 queue 3 (polling)
+ * VirtualEthernet0/0/13 queue 1 (polling)
+ * VirtualEthernet0/0/13 queue 3 (polling)
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (show_interface_rx_placement, static) = {
+ .path = "show interface rx-placement",
+ .short_help = "show interface rx-placement",
+ .function = show_interface_rx_placement_fn,
+};
+/* *INDENT-ON* */
+
+clib_error_t *
+set_hw_interface_rx_placement (u32 hw_if_index, u32 queue_id,
+ u32 thread_index, u8 is_main)
+{
+ vnet_main_t *vnm = vnet_get_main ();
+ vnet_device_main_t *vdm = &vnet_device_main;
+ clib_error_t *error = 0;
+ vnet_hw_interface_rx_mode mode = VNET_HW_INTERFACE_RX_MODE_UNKNOWN;
+ int rv;
+
+ if (is_main)
+ thread_index = 0;
+ else
+ thread_index += vdm->first_worker_thread_index;
+
+ if (thread_index > vdm->last_worker_thread_index)
+ return clib_error_return (0,
+ "please specify valid worker thread or main");
+
+ rv = vnet_hw_interface_get_rx_mode (vnm, hw_if_index, queue_id, &mode);
+
+ if (rv)
+ return clib_error_return (0, "not found");
+
+ rv = vnet_hw_interface_unassign_rx_thread (vnm, hw_if_index, queue_id);
+
+ if (rv)
+ return clib_error_return (0, "not found");
+
+ vnet_hw_interface_assign_rx_thread (vnm, hw_if_index, queue_id,
+ thread_index);
+ vnet_hw_interface_set_rx_mode (vnm, hw_if_index, queue_id, mode);
+
+ return (error);
+}
+
+static clib_error_t *
+set_interface_rx_placement (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ clib_error_t *error = 0;
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vnet_main_t *vnm = vnet_get_main ();
+ u32 hw_if_index = (u32) ~ 0;
+ u32 queue_id = (u32) 0;
+ u32 thread_index = (u32) ~ 0;
+ u8 is_main = 0;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, vnm, &hw_if_index))
+ ;
+ else if (unformat (line_input, "queue %d", &queue_id))
+ ;
+ else if (unformat (line_input, "main", &thread_index))
+ is_main = 1;
+ else if (unformat (line_input, "worker %d", &thread_index))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ unformat_free (line_input);
+ return error;
+ }
+ }
+
+ unformat_free (line_input);
+
+ if (hw_if_index == (u32) ~ 0)
+ return clib_error_return (0, "please specify valid interface name");
+
+ error = set_hw_interface_rx_placement (hw_if_index, queue_id, thread_index,
+ is_main);
+
+ return (error);
+}
+
+/*?
+ * This command is used to assign a given interface, and optionally a
+ * given queue, to a different thread. If the '<em>queue</em>' is not provided,
+ * it defaults to 0. The '<em>worker</em>' parameter is zero based and the index
+ * in the thread name, for example, 0 in the thread name '<em>vpp_wk_0</em>'.
+ *
+ * @cliexpar
+ * Example of how to display the interface placement:
+ * @cliexstart{show interface rx-placement}
+ * Thread 1 (vpp_wk_0):
+ * node dpdk-input:
+ * GigabitEthernet7/0/0 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 0 (polling)
+ * VirtualEthernet0/0/12 queue 2 (polling)
+ * VirtualEthernet0/0/13 queue 0 (polling)
+ * VirtualEthernet0/0/13 queue 2 (polling)
+ * Thread 2 (vpp_wk_1):
+ * node dpdk-input:
+ * GigabitEthernet7/0/1 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 1 (polling)
+ * VirtualEthernet0/0/12 queue 3 (polling)
+ * VirtualEthernet0/0/13 queue 1 (polling)
+ * VirtualEthernet0/0/13 queue 3 (polling)
+ * @cliexend
+ * Example of how to assign a interface and queue to a worker thread:
+ * @cliexcmd{set interface rx-placement VirtualEthernet0/0/12 queue 1 worker 0}
+ * Example of how to display the interface placement:
+ * @cliexstart{show interface rx-placement}
+ * Thread 1 (vpp_wk_0):
+ * node dpdk-input:
+ * GigabitEthernet7/0/0 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 0 (polling)
+ * VirtualEthernet0/0/12 queue 1 (polling)
+ * VirtualEthernet0/0/12 queue 2 (polling)
+ * VirtualEthernet0/0/13 queue 0 (polling)
+ * VirtualEthernet0/0/13 queue 2 (polling)
+ * Thread 2 (vpp_wk_1):
+ * node dpdk-input:
+ * GigabitEthernet7/0/1 queue 0 (polling)
+ * node vhost-user-input:
+ * VirtualEthernet0/0/12 queue 3 (polling)
+ * VirtualEthernet0/0/13 queue 1 (polling)
+ * VirtualEthernet0/0/13 queue 3 (polling)
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_if_rx_placement,static) = {
+ .path = "set interface rx-placement",
+ .short_help = "set interface rx-placement <interface> [queue <n>] "
+ "[worker <n> | main]",
+ .function = set_interface_rx_placement,
+ .is_mp_safe = 1,
+};
+/* *INDENT-ON* */
+
+static u8 *
+format_vnet_pcap (u8 * s, va_list * args)
+{
+ vnet_pcap_t *pp = va_arg (*args, vnet_pcap_t *);
+ int type = va_arg (*args, int);
+ int printed = 0;
+
+ if (type == 0)
+ {
+ if (pp->pcap_rx_enable)
+ {
+ s = format (s, "rx");
+ printed = 1;
+ }
+ if (pp->pcap_tx_enable)
+ {
+ if (printed)
+ s = format (s, " and ");
+ s = format (s, "tx");
+ printed = 1;
+ }
+ if (pp->pcap_drop_enable)
+ {
+ if (printed)
+ s = format (s, " and ");
+ s = format (s, "drop");
+ printed = 1;
+ }
+ return s;
+ }
+ s = format (s, "unknown type %d!", type);
+ return s;
+}
+
+
+int
+vnet_pcap_dispatch_trace_configure (vnet_pcap_dispatch_trace_args_t * a)
+{
+ vlib_main_t *vm = vlib_get_main ();
+ vnet_pcap_t *pp = &vm->pcap;
+ pcap_main_t *pm = &pp->pcap_main;
+ vnet_classify_main_t *cm = &vnet_classify_main;
+ vnet_classify_filter_set_t *set = 0;
+
+ if (a->status)
+ {
+ if (pp->pcap_rx_enable || pp->pcap_tx_enable || pp->pcap_drop_enable)
+ {
+ vlib_cli_output
+ (vm, "pcap %U dispatch capture enabled: %d of %d pkts...",
+ format_vnet_pcap, pp, 0 /* print type */ ,
+ pm->n_packets_captured, pm->n_packets_to_capture);
+ vlib_cli_output (vm, "capture to file %s", pm->file_name);
+ }
+ else
+ vlib_cli_output (vm, "pcap dispatch capture disabled");
+
+ return 0;
+ }
+
+ /* Consistency checks */
+
+ /* Enable w/ capture already enabled not allowed */
+ if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
+ && (a->rx_enable + a->tx_enable + a->drop_enable))
+ return VNET_API_ERROR_INVALID_VALUE;
+
+ /* Disable capture with capture already disabled, not interesting */
+ if (((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable) == 0)
+ && ((a->rx_enable + a->tx_enable + a->drop_enable == 0)))
+ return VNET_API_ERROR_VALUE_EXIST;
+
+ /* Change number of packets to capture while capturing */
+ if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
+ && (a->rx_enable + a->tx_enable + a->drop_enable)
+ && (pm->n_packets_to_capture != a->packets_to_capture))
+ return VNET_API_ERROR_INVALID_VALUE_2;
+
+ set = pool_elt_at_index (cm->filter_sets, cm->filter_set_by_sw_if_index[0]);
+
+ /* Classify filter specified, but no classify filter configured */
+ if ((a->rx_enable + a->tx_enable + a->drop_enable) && a->filter &&
+ (set->table_indices == 0 || set->table_indices[0] == ~0))
+ return VNET_API_ERROR_NO_SUCH_LABEL;
+
+ if (a->rx_enable + a->tx_enable + a->drop_enable)
+ {
+ /* Sanity check max bytes per pkt */
+ if (a->max_bytes_per_pkt < 32 || a->max_bytes_per_pkt > 9000)
+ return VNET_API_ERROR_INVALID_MEMORY_SIZE;
+
+ /* Clean up from previous run, if any */
+ vec_free (pm->file_name);
+ vec_free (pm->pcap_data);
+ memset (pm, 0, sizeof (*pm));
+
+ vec_validate_aligned (vnet_trace_dummy, 2048, CLIB_CACHE_LINE_BYTES);
+ if (pm->lock == 0)
+ clib_spinlock_init (&(pm->lock));
+
+ if (a->filename == 0)
+ {
+ u8 *stem = 0;
+
+ if (a->rx_enable)
+ stem = format (stem, "rx");
+ if (a->tx_enable)
+ stem = format (stem, "tx");
+ if (a->drop_enable)
+ stem = format (stem, "drop");
+ a->filename = format (0, "/tmp/%s.pcap%c", stem, 0);
+ vec_free (stem);
+ }
+
+ pm->file_name = (char *) a->filename;
+ pm->n_packets_captured = 0;
+ pm->packet_type = PCAP_PACKET_TYPE_ethernet;
+ pm->n_packets_to_capture = a->packets_to_capture;
+ pp->pcap_sw_if_index = a->sw_if_index;
+ if (a->filter)
+ pp->filter_classify_table_index = set->table_indices[0];
+ else
+ pp->filter_classify_table_index = ~0;
+ pp->pcap_rx_enable = a->rx_enable;
+ pp->pcap_tx_enable = a->tx_enable;
+ pp->pcap_drop_enable = a->drop_enable;
+ pp->max_bytes_per_pkt = a->max_bytes_per_pkt;
+ }
+ else
+ {
+ pp->pcap_rx_enable = 0;
+ pp->pcap_tx_enable = 0;
+ pp->pcap_drop_enable = 0;
+ pp->filter_classify_table_index = ~0;
+ if (pm->n_packets_captured)
+ {
+ clib_error_t *error;
+ pm->n_packets_to_capture = pm->n_packets_captured;
+ vlib_cli_output (vm, "Write %d packets to %s, and stop capture...",
+ pm->n_packets_captured, pm->file_name);
+ error = pcap_write (pm);
+ if (pm->flags & PCAP_MAIN_INIT_DONE)
+ pcap_close (pm);
+ /* Report I/O errors... */
+ if (error)
+ {
+ clib_error_report (error);
+ return VNET_API_ERROR_SYSCALL_ERROR_1;
+ }
+ return 0;
+ }
+ else
+ return VNET_API_ERROR_NO_SUCH_ENTRY;
+ }
+
+ return 0;
+}
+
+static clib_error_t *
+pcap_trace_command_fn (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vnet_pcap_dispatch_trace_args_t _a, *a = &_a;
+ vnet_main_t *vnm = vnet_get_main ();
+ u8 *filename = 0;
+ u32 max = 1000;
+ u32 max_bytes_per_pkt = 512;
+ int rv;
+ int rx_enable = 0;
+ int tx_enable = 0;
+ int drop_enable = 0;
+ int status = 0;
+ int filter = 0;
+ u32 sw_if_index = ~0;
+
+ /* Get a line of input. */
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (line_input, "rx"))
+ rx_enable = 1;
+ else if (unformat (line_input, "tx"))
+ tx_enable = 1;
+ else if (unformat (line_input, "drop"))
+ drop_enable = 1;
+ else if (unformat (line_input, "off"))
+ rx_enable = tx_enable = drop_enable = 0;
+ else if (unformat (line_input, "max-bytes-per-pkt %u",
+ &max_bytes_per_pkt))
+ ;
+ else if (unformat (line_input, "max %d", &max))
+ ;
+ else if (unformat (line_input, "packets-to-capture %d", &max))
+ ;
+ else if (unformat (line_input, "file %U", unformat_vlib_tmpfile,
+ &filename))
+ ;
+ else if (unformat (line_input, "status %=", &status, 1))
+ ;
+ else if (unformat (line_input, "intfc %U",
+ unformat_vnet_sw_interface, vnm, &sw_if_index))
+ ;
+ else if (unformat (line_input, "intfc any"))
+ sw_if_index = 0;
+ else if (unformat (line_input, "filter"))
+ filter = 1;
+ else
+ {
+ return clib_error_return (0, "unknown input `%U'",
+ format_unformat_error, line_input);
+ }
+ }
+
+ unformat_free (line_input);
+
+ /* no need for memset (a, 0, sizeof (*a)), set all fields here. */
+ a->filename = filename;
+ a->rx_enable = rx_enable;
+ a->tx_enable = tx_enable;
+ a->drop_enable = drop_enable;
+ a->status = status;
+ a->packets_to_capture = max;
+ a->sw_if_index = sw_if_index;
+ a->filter = filter;
+ a->max_bytes_per_pkt = max_bytes_per_pkt;
+
+ rv = vnet_pcap_dispatch_trace_configure (a);
+
+ switch (rv)
+ {
+ case 0:
+ break;
+
+ case VNET_API_ERROR_INVALID_VALUE:
+ return clib_error_return (0, "dispatch trace already enabled...");
+
+ case VNET_API_ERROR_VALUE_EXIST:
+ return clib_error_return (0, "dispatch trace already disabled...");
+
+ case VNET_API_ERROR_INVALID_VALUE_2:
+ return clib_error_return
+ (0, "can't change number of records to capture while tracing...");
+
+ case VNET_API_ERROR_SYSCALL_ERROR_1:
+ return clib_error_return (0, "I/O writing trace capture...");
+
+ case VNET_API_ERROR_NO_SUCH_ENTRY:
+ return clib_error_return (0, "No packets captured...");
+
+ case VNET_API_ERROR_INVALID_MEMORY_SIZE:
+ return clib_error_return (0,
+ "Max bytes per pkt must be > 32, < 9000...");
+
+ case VNET_API_ERROR_NO_SUCH_LABEL:
+ return clib_error_return
+ (0, "No classify filter configured, see 'classify filter...'");
+
+ default:
+ vlib_cli_output (vm, "WARNING: trace configure returned %d", rv);
+ break;
+ }
+ return 0;
+}
+
+/*?
+ * This command is used to start or stop a packet capture, or show
+ * the status of packet capture.
+ *
+ * This command has the following optional parameters:
+ *
+ *
+ * - <b>rx</b> - Capture received packets
+ *
+ * - <b>tx</b> - Capture transmitted packets
+ *
+ * - <b>drop</b> - Capture dropped packets
+ *
+ * - <b>off</b> - Stop capturing packets, write results to the specified file
+ *
+ * - <b>max <nn></b> - Depth of local buffer. Once '<em>nn</em>' number
+ * of packets have been received, buffer is flushed to file. Once another
+ * '<em>nn</em>' number of packets have been received, buffer is flushed
+ * to file, overwriting previous write. If not entered, value defaults
+ * to 100. Can only be updated if packet capture is off.
+ *
+ * - <b>max-bytes-per-pkt <nnnn></b> - Maximum number of bytes to capture
+ * for each packet. Must be >= 32, <= 9000.
+ *
+ * - <b>intfc <interface-name>|any</b> - Used to specify a given interface,
+ * or use '<em>any</em>' to run packet capture on all interfaces.
+ * '<em>any</em>' is the default if not provided. Settings from a previous
+ * packet capture are preserved, so '<em>any</em>' can be used to reset
+ * the interface setting.
+ *
+ * - <b>filter</b> - Use the pcap rx / tx / drop trace filter, which
+ * must be configured. Use <b>classify filter pcap...</b> to configure the
+ * filter. The filter will only be executed if the per-interface or
+ * any-interface tests fail.
+ *
+ * - <b>file <name></b> - Used to specify the output filename. The file will
+ * be placed in the '<em>/tmp</em>' directory, so only the filename is
+ * supported. Directory should not be entered. If file already exists, file
+ * will be overwritten. If no filename is provided, the file will be
+ * named "/tmp/rx.pcap", "/tmp/tx.pcap", "/tmp/rxandtx.pcap", etc.
+ * Can only be updated if packet capture is off.
+ *
+ * - <b>status</b> - Displays the current status and configured attributes
+ * associated with a packet capture. If packet capture is in progress,
+ * '<em>status</em>' also will return the number of packets currently in
+ * the local buffer. All additional attributes entered on command line
+ * with '<em>status</em>' will be ignored and not applied.
+ *
+ * @cliexpar
+ * Example of how to display the status of a tx packet capture when off:
+ * @cliexstart{pcap trace status}
+ * max is 100, for any interface to file /tmp/vpe.pcap
+ * pcap tx capture is off...
+ * @cliexend
+ * Example of how to start a tx packet capture:
+ * @cliexstart{pcap trace tx max 35 intfc GigabitEthernet0/8/0 file vppTest.pcap}
+ * @cliexend
+ * Example of how to display the status of a tx packet capture in progress:
+ * @cliexstart{pcap trace status}
+ * max is 35, for interface GigabitEthernet0/8/0 to file /tmp/vppTest.pcap
+ * pcap tx capture is on: 20 of 35 pkts...
+ * @cliexend
+ * Example of how to stop a tx packet capture:
+ * @cliexstart{pcap trace off}
+ * captured 21 pkts...
+ * saved to /tmp/vppTest.pcap...
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+
+VLIB_CLI_COMMAND (pcap_tx_trace_command, static) = {
+ .path = "pcap trace",
+ .short_help =
+ "pcap trace rx tx drop off [max <nn>] [intfc <interface>|any] [file <name>] [status] [max-bytes-per-pkt <nnnn>][filter]",
+ .function = pcap_trace_command_fn,
+};
+/* *INDENT-ON* */