+/* *INDENT-ON* */
+
+void
+vnet_int_vxlan_gpe_bypass_mode (u32 sw_if_index, u8 is_ip6, u8 is_enable)
+{
+ if (is_ip6)
+ vnet_feature_enable_disable ("ip6-unicast", "ip6-vxlan-gpe-bypass",
+ sw_if_index, is_enable, 0, 0);
+ else
+ vnet_feature_enable_disable ("ip4-unicast", "ip4-vxlan-gpe-bypass",
+ sw_if_index, is_enable, 0, 0);
+}
+
+
+static clib_error_t *
+set_ip_vxlan_gpe_bypass (u32 is_ip6,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vnet_main_t *vnm = vnet_get_main ();
+ clib_error_t *error = 0;
+ u32 sw_if_index, is_enable;
+
+ sw_if_index = ~0;
+ is_enable = 1;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat_user
+ (line_input, unformat_vnet_sw_interface, vnm, &sw_if_index))
+ ;
+ else if (unformat (line_input, "del"))
+ is_enable = 0;
+ else
+ {
+ error = unformat_parse_error (line_input);
+ goto done;
+ }
+ }
+
+ if (~0 == sw_if_index)
+ {
+ error = clib_error_return (0, "unknown interface `%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+
+ vnet_int_vxlan_gpe_bypass_mode (sw_if_index, is_ip6, is_enable);
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+static clib_error_t *
+set_ip4_vxlan_gpe_bypass (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ return set_ip_vxlan_gpe_bypass (0, input, cmd);
+}
+
+/*?
+ * This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given interface.
+ * By adding the IPv4 vxlan-gpe-bypass graph node to an interface, the node checks
+ * for and validate input vxlan_gpe packet and bypass ip4-lookup, ip4-local,
+ * ip4-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will
+ * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of graph node before ip4-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip4-vxlan-gpe-bypass error-drop [0]
+ * vxlan4-gpe-input [1]
+ * ip4-lookup [2]
+ * @cliexend
+ *
+ * Example of how to enable ip4-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0}
+ *
+ * Example of graph node after ip4-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip4-vxlan-gpe-bypass error-drop [0] ip4-input
+ * vxlan4-gpe-input [1] ip4-input-no-checksum
+ * ip4-lookup [2]
+ * @cliexend
+ *
+ * Example of how to display the feature enabled on an interface:
+ * @cliexstart{show ip interface features GigabitEthernet2/0/0}
+ * IP feature paths configured on GigabitEthernet2/0/0...
+ * ...
+ * ipv4 unicast:
+ * ip4-vxlan-gpe-bypass
+ * ip4-lookup
+ * ...
+ * @cliexend
+ *
+ * Example of how to disable ip4-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 del}
+ * @endparblock
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (set_interface_ip_vxlan_gpe_bypass_command, static) = {
+ .path = "set interface ip vxlan-gpe-bypass",
+ .function = set_ip4_vxlan_gpe_bypass,
+ .short_help = "set interface ip vxlan-gpe-bypass <interface> [del]",
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_ip6_vxlan_gpe_bypass (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ return set_ip_vxlan_gpe_bypass (1, input, cmd);
+}
+
+/*?
+ * This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given interface.
+ * By adding the IPv6 vxlan-gpe-bypass graph node to an interface, the node checks
+ * for and validate input vxlan_gpe packet and bypass ip6-lookup, ip6-local,
+ * ip6-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will
+ * cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of graph node before ip6-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip6-vxlan-gpe-bypass error-drop [0]
+ * vxlan6-gpe-input [1]
+ * ip6-lookup [2]
+ * @cliexend
+ *
+ * Example of how to enable ip6-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0}
+ *
+ * Example of graph node after ip6-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip6-vxlan-gpe-bypass error-drop [0] ip6-input
+ * vxlan6-gpe-input [1] ip4-input-no-checksum
+ * ip6-lookup [2]
+ * @cliexend
+ *
+ * Example of how to display the feature enabled on an interface:
+ * @cliexstart{show ip interface features GigabitEthernet2/0/0}
+ * IP feature paths configured on GigabitEthernet2/0/0...
+ * ...
+ * ipv6 unicast:
+ * ip6-vxlan-gpe-bypass
+ * ip6-lookup
+ * ...
+ * @cliexend
+ *
+ * Example of how to disable ip6-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 del}
+ * @endparblock
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (set_interface_ip6_vxlan_gpe_bypass_command, static) = {
+ .path = "set interface ip6 vxlan-gpe-bypass",
+ .function = set_ip6_vxlan_gpe_bypass,
+ .short_help = "set interface ip vxlan-gpe-bypass <interface> [del]",
+};
+/* *INDENT-ON* */
+
+/* *INDENT-OFF* */
+VNET_FEATURE_INIT (ip4_vxlan_gpe_bypass, static) =
+{
+ .arc_name = "ip4-unicast",
+ .node_name = "ip4-vxlan-gpe-bypass",
+ .runs_before = VNET_FEATURES ("ip4-lookup"),
+};
+
+VNET_FEATURE_INIT (ip6_vxlan_gpe_bypass, static) =
+{
+ .arc_name = "ip6-unicast",
+ .node_name = "ip6-vxlan-gpe-bypass",
+ .runs_before = VNET_FEATURES ("ip6-lookup"),
+};
+/* *INDENT-ON* */