| tc01-64B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc01-64B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc02-64B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc02-64B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc03-1460B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc03-1460B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc04-1460B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc04-1460B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc05-9000B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc05-9000B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| tc06-9000B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc06-9000B-1t1c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| tc07-64B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc07-64B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc08-64B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc08-64B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc09-1460B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc09-1460B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc10-1460B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc10-1460B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc11-9000B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc11-9000B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| tc12-9000B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc12-9000B-2t2c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| tc13-64B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc13-64B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc14-64B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc14-64B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc15-1460B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc15-1460B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc16-1460B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc16-1460B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 50kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${50000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| tc17-9000B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc17-9000B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| tc18-9000B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| tc18-9000B-4t4c-ethip4lispip6-ip4base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 48}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}