+define ikev2_profile_add_del_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IKEv2: Set IKEv2 profile authentication method
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+
+ @param name - IKEv2 profile name
+ @param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig)
+ @param is_hex - Authentication data in hex format if non-zero, else string
+ @param data_len - Authentication data length
+ @param data - Authentication data (for rsa-sig cert file path)
+*/
+define ikev2_profile_set_auth
+{
+ u32 client_index;
+ u32 context;
+
+ u8 name[64];
+ u8 auth_method;
+ u8 is_hex;
+ u32 data_len;
+ u8 data[0];
+};
+
+/** \brief Reply for IKEv2: Set IKEv2 profile authentication method
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define ikev2_profile_set_auth_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IKEv2: Set IKEv2 profile local/remote identification
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+
+ @param name - IKEv2 profile name
+ @param is_local - Identification is local if non-zero, else remote
+ @param id_type - Identification type
+ @param data_len - Identification data length
+ @param data - Identification data
+*/
+define ikev2_profile_set_id
+{
+ u32 client_index;
+ u32 context;
+
+ u8 name[64];
+ u8 is_local;
+ u8 id_type;
+ u32 data_len;
+ u8 data[0];
+};
+
+/** \brief Reply for IKEv2:
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define ikev2_profile_set_id_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IKEv2: Set IKEv2 profile traffic selector parameters
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+
+ @param name - IKEv2 profile name
+ @param is_local - Traffic selector is local if non-zero, else remote
+ @param proto - Traffic selector IP protocol (if zero not relevant)
+ @param start_port - The smallest port number allowed by traffic selector
+ @param end_port - The largest port number allowed by traffic selector
+ @param start_addr - The smallest address included in traffic selector
+ @param end_addr - The largest address included in traffic selector
+*/
+define ikev2_profile_set_ts
+{
+ u32 client_index;
+ u32 context;
+
+ u8 name[64];
+ u8 is_local;
+ u8 proto;
+ u16 start_port;
+ u16 end_port;
+ u32 start_addr;
+ u32 end_addr;
+};
+
+/** \brief Reply for IKEv2: Set IKEv2 profile traffic selector parameters
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define ikev2_profile_set_ts_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IKEv2: Set IKEv2 local RSA private key
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+
+ @param key_file - Key file absolute path
+*/
+define ikev2_set_local_key
+{
+ u32 client_index;
+ u32 context;
+
+ u8 key_file[256];
+};
+
+/** \brief Reply for IKEv2: Set IKEv2 local key
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define ikev2_set_local_key_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Tell client about a DHCP completion event
+ @param client_index - opaque cookie to identify the sender
+ @param pid - client pid registered to receive notification
+ @param is_ipv6 - if non-zero the address is ipv6, else ipv4
+ @param host_address - Host IP address
+ @param router_address - Router IP address
+ @param host_mac - Host MAC address
+*/
+define dhcp_compl_event
+{
+ u32 client_index;
+ u32 pid;
+ u8 hostname[64];
+ u8 is_ipv6;
+ u8 host_address[16];
+ u8 router_address[16];
+ u8 host_mac[6];
+};
+
+/** \brief cop: enable/disable junk filtration features on an interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_inded - desired interface
+ @param enable_disable - 1 => enable, 0 => disable
+*/
+
+define cop_interface_enable_disable
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 enable_disable;
+};
+
+/** \brief cop: interface enable/disable junk filtration reply
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+
+define cop_interface_enable_disable_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief cop: enable/disable whitelist filtration features on an interface
+ Note: the supplied fib_id must match in order to remove the feature!
+
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface handle, physical interfaces only
+ @param fib_id - fib identifier for the whitelist / blacklist fib
+ @param ip4 - 1 => enable ip4 filtration, 0=> disable ip4 filtration
+ @param ip6 - 1 => enable ip6 filtration, 0=> disable ip6 filtration
+ @param default_cop - 1 => enable non-ip4, non-ip6 filtration 0=> disable it
+*/
+
+define cop_whitelist_enable_disable
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 fib_id;
+ u8 ip4;
+ u8 ip6;
+ u8 default_cop;
+};
+
+/** \brief cop: interface enable/disable junk filtration reply
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+
+define cop_whitelist_enable_disable_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief get_node_graph - get a copy of the vpp node graph
+ including the current set of graph arcs.
+
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+
+define get_node_graph
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief get_node_graph_reply
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+ @param reply_in_shmem - result from vlib_node_serialize, in shared
+ memory. Process with vlib_node_unserialize, remember to switch
+ heaps and free the result.
+*/
+
+define get_node_graph_reply
+{
+ u32 context;
+ i32 retval;
+ u64 reply_in_shmem;
+};
+
+/** \brief IOAM enable : Enable in-band OAM
+ @param id - profile id
+ @param seqno - To enable Seqno Processing
+ @param analyse - Enabling analysis of iOAM at decap node
+ @param pow_enable - Proof of Work enabled or not flag
+ @param trace_enable - iOAM Trace enabled or not flag
+*/
+define ioam_enable
+{
+ u32 client_index;
+ u32 context;
+ u16 id;
+ u8 seqno;
+ u8 analyse;
+ u8 pot_enable;
+ u8 trace_enable;
+ u32 node_id;
+};
+
+/** \brief iOAM Trace profile add / del response
+ @param context - sender context, to match reply w/ request
+ @param retval - return value for request
+*/
+define ioam_enable_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief iOAM disable
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param index - MAP Domain index
+*/
+define ioam_disable
+{
+ u32 client_index;
+ u32 context;
+ u16 id;
+};
+
+/** \brief iOAM disable response
+ @param context - sender context, to match reply w/ request
+ @param retval - return value for request
+*/
+define ioam_disable_reply
+{
+ u32 context;
+ i32 retval;