New upstream version 16.11.8
[deb_dpdk.git] / app / test-pmd / testpmd.c
index 8d0905e..e48cf8a 100644 (file)
@@ -63,7 +63,6 @@
 #include <rte_lcore.h>
 #include <rte_atomic.h>
 #include <rte_branch_prediction.h>
-#include <rte_ring.h>
 #include <rte_mempool.h>
 #include <rte_malloc.h>
 #include <rte_mbuf.h>
@@ -284,7 +283,7 @@ struct rte_eth_rxmode rx_mode = {
        .hw_vlan_strip  = 1, /**< VLAN strip enabled. */
        .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
        .jumbo_frame    = 0, /**< Jumbo Frame Support disabled. */
-       .hw_strip_crc   = 0, /**< CRC stripping by hardware disabled. */
+       .hw_strip_crc   = 1, /**< CRC stripping by hardware enabled. */
 };
 
 struct rte_fdir_conf fdir_conf = {
@@ -292,7 +291,7 @@ struct rte_fdir_conf fdir_conf = {
        .pballoc = RTE_FDIR_PBALLOC_64K,
        .status = RTE_FDIR_REPORT_STATUS,
        .mask = {
-               .vlan_tci_mask = 0x0,
+               .vlan_tci_mask = 0xFFEF,
                .ipv4_mask     = {
                        .src_ip = 0xFFFFFFFF,
                        .dst_ip = 0xFFFFFFFF,
@@ -519,34 +518,6 @@ init_config(void)
                fwd_lcores[lc_id]->cpuid_idx = lc_id;
        }
 
-       /*
-        * Create pools of mbuf.
-        * If NUMA support is disabled, create a single pool of mbuf in
-        * socket 0 memory by default.
-        * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
-        *
-        * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
-        * nb_txd can be configured at run time.
-        */
-       if (param_total_num_mbufs)
-               nb_mbuf_per_pool = param_total_num_mbufs;
-       else {
-               nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + (nb_lcores * mb_mempool_cache)
-                               + RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
-
-               if (!numa_support)
-                       nb_mbuf_per_pool =
-                               (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
-       }
-
-       if (!numa_support) {
-               if (socket_num == UMA_NO_CONFIG)
-                       mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
-               else
-                       mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
-                                                socket_num);
-       }
-
        FOREACH_PORT(pid, ports) {
                port = &ports[pid];
                rte_eth_dev_info_get(pid, &port->dev_info);
@@ -569,20 +540,37 @@ init_config(void)
                port->need_reconfig_queues = 1;
        }
 
+       /*
+        * Create pools of mbuf.
+        * If NUMA support is disabled, create a single pool of mbuf in
+        * socket 0 memory by default.
+        * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
+        *
+        * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
+        * nb_txd can be configured at run time.
+        */
+       if (param_total_num_mbufs)
+               nb_mbuf_per_pool = param_total_num_mbufs;
+       else {
+               nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
+                       (nb_lcores * mb_mempool_cache) +
+                       RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
+               nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
+       }
+
        if (numa_support) {
                uint8_t i;
-               unsigned int nb_mbuf;
 
-               if (param_total_num_mbufs)
-                       nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
-
-               for (i = 0; i < max_socket; i++) {
-                       nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
-                       if (nb_mbuf)
-                               mbuf_pool_create(mbuf_data_size,
-                                               nb_mbuf,i);
-               }
+               for (i = 0; i < max_socket; i++)
+                       mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, i);
+       } else {
+               if (socket_num == UMA_NO_CONFIG)
+                       mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
+               else
+                       mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+                                                socket_num);
        }
+
        init_port_config();
 
        /*
@@ -687,18 +675,23 @@ init_fwd_streams(void)
 
        /* init new */
        nb_fwd_streams = nb_fwd_streams_new;
-       fwd_streams = rte_zmalloc("testpmd: fwd_streams",
-               sizeof(struct fwd_stream *) * nb_fwd_streams, RTE_CACHE_LINE_SIZE);
-       if (fwd_streams == NULL)
-               rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_stream *)) "
-                                               "failed\n", nb_fwd_streams);
-
-       for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
-               fwd_streams[sm_id] = rte_zmalloc("testpmd: struct fwd_stream",
-                               sizeof(struct fwd_stream), RTE_CACHE_LINE_SIZE);
-               if (fwd_streams[sm_id] == NULL)
-                       rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_stream)"
-                                                               " failed\n");
+       if (nb_fwd_streams) {
+               fwd_streams = rte_zmalloc("testpmd: fwd_streams",
+                       sizeof(struct fwd_stream *) * nb_fwd_streams,
+                       RTE_CACHE_LINE_SIZE);
+               if (fwd_streams == NULL)
+                       rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
+                                " (struct fwd_stream *)) failed\n",
+                                nb_fwd_streams);
+
+               for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
+                       fwd_streams[sm_id] = rte_zmalloc("testpmd:"
+                               " struct fwd_stream", sizeof(struct fwd_stream),
+                               RTE_CACHE_LINE_SIZE);
+                       if (fwd_streams[sm_id] == NULL)
+                               rte_exit(EXIT_FAILURE, "rte_zmalloc"
+                                        "(struct fwd_stream) failed\n");
+               }
        }
 
        return 0;
@@ -732,6 +725,9 @@ pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
                        pktnb_stats[1] = pktnb_stats[0];
                        burst_stats[0] = nb_burst;
                        pktnb_stats[0] = nb_pkt;
+               } else if (nb_burst > burst_stats[1]) {
+                       burst_stats[1] = nb_burst;
+                       pktnb_stats[1] = nb_pkt;
                }
        }
        if (total_burst == 0)
@@ -987,6 +983,31 @@ launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
        }
 }
 
+/*
+ * Update the forward ports list.
+ */
+void
+update_fwd_ports(portid_t new_pid)
+{
+       unsigned int i;
+       unsigned int new_nb_fwd_ports = 0;
+       int move = 0;
+
+       for (i = 0; i < nb_fwd_ports; ++i) {
+               if (port_id_is_invalid(fwd_ports_ids[i], DISABLED_WARN))
+                       move = 1;
+               else if (move)
+                       fwd_ports_ids[new_nb_fwd_ports++] = fwd_ports_ids[i];
+               else
+                       new_nb_fwd_ports++;
+       }
+       if (new_pid < RTE_MAX_ETHPORTS)
+               fwd_ports_ids[new_nb_fwd_ports++] = new_pid;
+
+       nb_fwd_ports = new_nb_fwd_ports;
+       nb_cfg_ports = new_nb_fwd_ports;
+}
+
 /*
  * Launch packet forwarding configuration.
  */
@@ -1022,10 +1043,6 @@ start_packet_forwarding(int with_tx_first)
                return;
        }
 
-       if (init_fwd_streams() < 0) {
-               printf("Fail from init_fwd_streams()\n");
-               return;
-       }
 
        if(dcb_test) {
                for (i = 0; i < nb_fwd_ports; i++) {
@@ -1045,10 +1062,11 @@ start_packet_forwarding(int with_tx_first)
        }
        test_done = 0;
 
+       fwd_config_setup();
+
        if(!no_flush_rx)
                flush_fwd_rx_queues();
 
-       fwd_config_setup();
        pkt_fwd_config_display(&cur_fwd_config);
        rxtx_config_display();
 
@@ -1584,6 +1602,8 @@ attach_port(char *identifier)
 
        ports[pi].port_status = RTE_PORT_STOPPED;
 
+       update_fwd_ports(pi);
+
        printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
        printf("Done\n");
 }
@@ -1606,6 +1626,8 @@ detach_port(uint8_t port_id)
        ports[port_id].enabled = 0;
        nb_ports = rte_eth_dev_count();
 
+       update_fwd_ports(RTE_MAX_ETHPORTS);
+
        printf("Port '%s' is detached. Now total ports is %d\n",
                        name, nb_ports);
        printf("Done\n");
@@ -1830,24 +1852,13 @@ init_port_config(void)
                        port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
                }
 
-               if (port->dcb_flag == 0 && port->dev_info.max_vfs == 0) {
+               if (port->dcb_flag == 0) {
                        if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
                                port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
                        else
                                port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
                }
 
-               if (port->dev_info.max_vfs != 0) {
-                       if (port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
-                               port->dev_conf.rxmode.mq_mode =
-                                       ETH_MQ_RX_VMDQ_RSS;
-                       else
-                               port->dev_conf.rxmode.mq_mode =
-                                       ETH_MQ_RX_NONE;
-
-                       port->dev_conf.txmode.mq_mode = ETH_MQ_TX_NONE;
-               }
-
                rxtx_port_config(port);
 
                rte_eth_macaddr_get(pid, &port->eth_addr);
@@ -1880,7 +1891,10 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
        struct rte_port *port;
 
        port = &ports[slave_pid];
-       return port->slave_flag;
+       if ((rte_eth_devices[slave_pid].data->dev_flags &
+           RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
+               return 1;
+       return 0;
 }
 
 const uint16_t vlan_tags[] = {
@@ -1891,12 +1905,14 @@ const uint16_t vlan_tags[] = {
 };
 
 static  int
-get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
+get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf,
                 enum dcb_mode_enable dcb_mode,
                 enum rte_eth_nb_tcs num_tcs,
                 uint8_t pfc_en)
 {
        uint8_t i;
+       int32_t rc;
+       struct rte_eth_rss_conf rss_conf;
 
        /*
         * Builds up the correct configuration for dcb+vt based on the vlan tags array
@@ -1923,8 +1939,8 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
                                1 << (i % vmdq_rx_conf->nb_queue_pools);
                }
                for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
-                       vmdq_rx_conf->dcb_tc[i] = i;
-                       vmdq_tx_conf->dcb_tc[i] = i;
+                       vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
+                       vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
                }
 
                /* set DCB mode of RX and TX of multiple queues */
@@ -1936,15 +1952,20 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
                struct rte_eth_dcb_tx_conf *tx_conf =
                                &eth_conf->tx_adv_conf.dcb_tx_conf;
 
+               rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
+               if (rc != 0)
+                       return rc;
+
                rx_conf->nb_tcs = num_tcs;
                tx_conf->nb_tcs = num_tcs;
 
-               for (i = 0; i < num_tcs; i++) {
-                       rx_conf->dcb_tc[i] = i;
-                       tx_conf->dcb_tc[i] = i;
+               for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
+                       rx_conf->dcb_tc[i] = i % num_tcs;
+                       tx_conf->dcb_tc[i] = i % num_tcs;
                }
+
                eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
-               eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf;
+               eth_conf->rx_adv_conf.rss_conf = rss_conf;
                eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
        }
 
@@ -1975,7 +1996,7 @@ init_port_dcb_config(portid_t pid,
        dcb_config = 1;
 
        /*set configuration of DCB in vt mode and DCB in non-vt mode*/
-       retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
+       retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
        if (retval < 0)
                return retval;
        port_conf.rxmode.hw_vlan_filter = 1;
@@ -2141,6 +2162,7 @@ main(int argc, char** argv)
                        start_packet_forwarding(0);
                }
                prompt();
+               pmd_test_exit();
        } else
 #endif
        {