<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-l2-ndrdisc.html"></iframe>
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/dpdk/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-ndrdisc}
+ \label{fig:64B-1t1c-l2-ndrdisc-dpdk}
+ \end{figure}
+
*Figure 1. Testpmd 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Looping.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. code-block:: bash
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set -x && cd tests/dpdk/perf && grep -P '64B-1t1c-eth-l2xcbase-testpmd-ndrdisc' *
+ :shell:
+
+.. only:: latex
- $ $CSIT/tests/dpdk/perf
- $ grep -E "64B-1t1c-eth-l2xcbase-testpmd-ndrdisc" *
+ .. code-block:: bash
- 10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc
- 10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc
- 40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc
+ $ cd tests/dpdk/perf
+ $ grep -P '64B-1t1c-eth-l2xcbase-testpmd-ndrdisc' *
Testpmd NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-l2-ndrdisc.html"></iframe>
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/dpdk/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-ndrdisc}
+ \label{fig:64B-2t2c-l2-ndrdisc-dpdk}
+ \end{figure}
+
*Figure 2. Testpmd 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
Looping.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. code-block:: bash
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set -x && cd tests/dpdk/perf && grep -P '64B-2t2c-eth-l2xcbase-testpmd-ndrdisc' *
+ :shell:
+
+.. only:: latex
- $ $CSIT/tests/dpdk/perf
- $ grep -E "64B-2t2c-eth-l2xcbase-testpmd-ndrdisc" *
+ .. code-block:: bash
- 10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc
- 10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc
- 40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc
+ $ cd tests/dpdk/perf
+ $ grep -P '64B-2t2c-eth-l2xcbase-testpmd-ndrdisc' *
PDR Throughput
~~~~~~~~~~~~~~
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-l2-pdrdisc.html"></iframe>
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/dpdk/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-pdrdisc}
+ \label{fig:64B-1t1c-l2-pdrdisc-dpdk}
+ \end{figure}
+
*Figure 3. Testpmd 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
Looping.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. code-block:: bash
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set -x && cd tests/dpdk/perf && grep -P '64B-1t1c-eth-l2xcbase-testpmd-pdrdisc' *
+ :shell:
+
+.. only:: latex
- $ $CSIT/tests/dpdk/perf
- $ grep -E "64B-1t1c-eth-l2xcbase-testpmd-pdrdisc" *
+ .. code-block:: bash
- 10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc
- 10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc
- 40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc
+ $ cd tests/dpdk/perf
+ $ grep -P '64B-1t1c-eth-l2xcbase-testpmd-pdrdisc' *
Testpmd PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-l2-pdrdisc.html"></iframe>
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/dpdk/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-pdrdisc}
+ \label{fig:64B-2t2c-l2-pdrdisc-dpdk}
+ \end{figure}
+
*Figure 4. Testpmd 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
Looping.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. code-block:: bash
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set -x && cd tests/dpdk/perf && grep -P '64B-2t2c-eth-l2xcbase-testpmd-pdrdisc' *
+ :shell:
- $ $CSIT/tests/dpdk/perf
- $ grep -E "64B-2t2c-eth-l2xcbase-testpmd-pdrdisc" *
+.. only:: latex
- 10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc
- 10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc
- 40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot:| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc
+ .. code-block:: bash
+ $ cd tests/dpdk/perf
+ $ grep -P '64B-2t2c-eth-l2xcbase-testpmd-pdrdisc' *